For main and local roads

For main and local roads - 1658 Max
HOUSING/FRAME: Made of die-cast aluminium.
REFLECTOR: Light pollution preventing optic unit: Pressed prismatic
aluminium 99.85, anodised (6/8µ) and polished, with flow recuperators.
COVER: Single piece die-cast aluminium, opens on hinges. With aluminium
latch and safety device against accidental opening. Glass: Temperato sp. , resistant to impact and thermal shock (UNI 12150-1:
2001 tests). 2001).
COATING: RAL7030/7016 Grey polyester powder coating, resistant to
corrosive and saline environments.
LAMPHOLDER: Ceramic with silver-plated contacts
ELECTRIC GEAR: 230V/50Hz power supply: Flexible wire terminated with
quick-connect admiralty brass clamps, silicone double insulation with fibreglass
braid, Ø 1 sqmm. 2P nylon terminal block (maximum allowed lead crosssection: 2.5 sqmm). STANDARD FEATURES: Electric gear on a removable tray with quick
connectors for line and lampholder connection. With anti-condensate filter.
Option to install a dimmer.
EQUIPMENT: During maintenance the cover stays attached by means of a
device that prevents accidental closing. Environment-friendly silicone rubber
gasket. Swivel mounting unit with protractor scale to control housing angle;
standard supply Supplied with knife switch .
REGULATIONS: Manufactured in accordance with EN60598-1 CEI 34-21
standards. Degree of protection IP667IK8 (lamp compartment) and IP 44IK8
(accessory compartment) in accordance with EN60529 standards. They have
obtained the ENEC European Certificate of Conformity. Insulation Class II.
Degree of protection IP66IK8, checked after applying an accelerated ageing
process (one month) and gasket mechanical stress (100 openings and
closings).
Wind exposed surface: 1825 cmq.
Light-pollution preventing optic unit for installation in area 1 (UNI10819), with
convenient tilting angle.
Download
DXF 2D
- 1658_max.dxf
3DS
- 1658_max.3ds
3DM
- 1658_max.3dm
Montaggi
- 1658_max.pdf
- installazione_palo_max.dxf
- 1658_braccio apertura.dxf
- plinto_max.dxf
- composizioni_max.dxf
Code
Gear
Kg
Watt
Base
Lamps
Colour
314262-30
CNR
14,00
SAP-T 150
E40
17200lm-2000K-Ra 4
SILVER/GRAPHITE
314263-30
CNR
15,00
SAP-T 250
E40
33000lm-2000 K-Ra 4
SILVER/GRAPHITE
314264-30
CNR
17,18
SAP-T 400
E40
48000lm-2000K-Ra 4
SILVER/GRAPHITE
Accessories
- 130 Ø76 pole adapter
- 207 Diamante
- 209 pole ø60 adapter
- 204 Arm
- 208 mast-top mount
12/03/2017
Contact the Consulting and design Centre for any lighting information.
PAG 1 - ENG
Download PDF