The Progressive QHP-905

The Progressive
Hot Air Sealing Machine
Model
QHP-905
*Data Display
All data is recorded and visually displayed on the LCD
Screen.
Date, time, tape consumption, time in use, heater
activation, etc.
*Ease of Data Input
Machine settings are input / changed on the LC touch
panel
*Security
Password protection – limits access to operation data.
Data is protected from unauthorized access / change.
*Feed System
Independent drive motors drive the upper and lower
rollers.
Differential feed eliminates puckering / creasing
problems.
*Fault Finding
Self-diagnostic fault-finding system.
Faults identified on LCD with suggested solutions.
*Nozzle Positioning
Modified nozzle mounting and movement System.
Nozzle can be positioned very accurately.
*Skip-Sealing
Full functional control for roller reverses turn.
Prevention of “Skip-sealing”
*Speed Setting. (Option)
System for temporary speed reduction to assist with
sealing at cross-over.
*Upper roller. (Option)
Heated with infrared sensor for accurate temp. control.
*Lower roller (Option)
Heated with infrared sensor for accurate temp. control.
*Post option.(Option)
It’s NEW
QHP-905 with optional devices
*Upper roller temperature controller
*Point marker
*Tape feeding system
Small diameter “Shoe Post” lower roller.
*Tape feed. (Option)
Motorized tape feed system.
To prevent tension / blocking on the reel.
*Point marking device (Option)
Point mark guides tape-cut timing / seam line.
Concept behind the development of
The QHP-905 Hot Air Tape Sealing Machine
The first QHP series seam sealing machines were delivered to manufacturers in 1983 and this was the start of
a success story for QUEEN LIGHT. The on-going commitment to new development is illustrated by the new
QHP-905, where the valuable feedback received from existing QHP machine users throughout the world has
been converted into machine reality – “THE PROGRESSIVE”
The concept has been to create a machine that is “User friendly” – a unit that is easy to understand, adjust and
operate whilst maintaining the excellent reputation for reliability. We are confident that the new machine meets
these criteria and that the new technology will provide users with significant advantages.
Infrared type
non-contact
sensor for accurate
temperature
control (Option)
Improved mechanical
design on nozzle
heater mounting
Point marking device
(Option)
Point
mark
guides
tape-cut timing / seam
line.
Shoe post roller
(Option)
For small diameter
Tape sealing
Model
Power required
Upper roller material
Width
Shape
Nozzle heater
Temperature control
(Nozzle)
Temperature range
LCD display provides
easy and precise
data-input and storage
facility with security.
Tape feeder
QHP-T5(Option)
prevent tension /
blocking on the reel.
Specifications
QHP-905
Hot air heat sealer
1P/200 220 240 V 50/60Hz
Power consumption Abt. 2.3 KVA
Steel with 200W heater or Silicon rubber Lower roller material Silicon rubber
28mm or 30 mm
Width Width 30 mm
Groove, Flat, or Cone cave
Shape Flat
2.0 KW (200V)
Nozzle width
22mm, 24mm, or 26mm
Automatic controller with digital indication
Automatic controller Digital indication (Option)
Room temp. to Max. 750 C dig.
Temperature control
(Upper roller)
LCD indication
Both roller differential ratio/Delay timer for
anti-skipping/Tape cut timing/Consumed Temperature range
tape length/Content of the machine
error/LCD lock /Maintenance counter
Air consumption
100 litter/min.
Prevention system
Drive system
Upper and Lower roller individually drive
Dimension
Motor
Stepping motor
Pulse width modulation control for heater
power.
Room temp. to Max. 150C dig.
non-contact type temperature sensor
(Effective 60 to 120 C dig.) (Option)
0-100% power supply control for heater
Power failure/Heater element/Air pressure
1300(W)
x
55(D)
x
1700(H)
Subjects may be changed without notes
Manufactured by
QUEEN LIGHT ELECTRONIC
INDUSTRIES LTD.
576-1 Minato, Wakayama, Japan 640-8404
Phone 8173-431-6245 Fax 8173-433-8815
E-Mail:info@queenlight.co.jp
Web site: www.queenlight.co.jp
With
Download PDF