! 1 2 3 4 5 6 7 8 9 10 11 12 13

05_Programmable Controller_1492.qxd
4/30/2008
10:05 AM
Page 12-118
Bulletin 1492
Programmable Controller Wiring Systems
Overview
Bulletin 1492 Programmable Controller Wiring Systems
y Increases machine building productivity
y Simplifies design and engineering time
y Reduces wiring time and wiring errors
y Benefits from quality-looking panels
!
1
Analog Wiring
Systems
Digital Wiring
Systems
2
3
4
5
6
7
Digital Wiring
Systems with
Field Removable
Terminal Blocks
Digital Wiring
Systems with
Fixed Terminal
Blocks
Standards Compliance and Certifications
y Agency Certifications for Modules and Cables
cULus: Hazardous Locations: Class I Div 2 (all except modules with
relays); Groups A, B, D, and D.
Temperature Code: T3C @ 60 °C.
UL File No. E10314, Guide No. NRAG
cULus: Ordinary Locations; Module with relays; UL File No. E11372
Guide No. NRAQ
y Agency Certification Modules
Factory Mutual (FM): Hazardous Locations; Class I Div 2 (all except
modules with relays): Gouprs A, B, C, and D. Temperature Rating:
T3C @ 60 °C. FM file J.I.3000590
y CE Certifications
Compliant for all applicable directives
9
11
12
13
Standards Compliance
and Certifications,
Continued
y UL 508
y UL 1604
y CSA C22.2 No. 14
y CSA C22.2 No. 213
y EN/IEC 61131-2
Description
Increased Volume and Productivity
Cable interconnections for a wiring system can be up to 30 times
faster to install than traditional point-to-point wiring, enabling OEMs
and panel builders using wiring systems to build panels faster and
produce more machines.
Benefits
Wiring is completed in a fraction of the time when wiring systems
are used, as compared with the traditional method of wiring each
point to the I/O swing arm and field-side terminal blocks. Pre-wired
cables are factory-wired to the I/O wiring arm on one end and a
connector for the Interface Module (IFM) on the other. IFMs enhance
the capability of the I/O systems with added terminations, field-side
LED status indicators, isolation circuits, overcurrent protection, and
higher amperage outputs. Both standard and specific build-to-order
length cables are available, providing the correct length for any
panel in a neat, space-efficient wiring solution.
Reduced Wiring Errors
10
Description ................... this page
Catalog Number
Explanation .................. 12-128
Selection Tables ......... 12-126
Digital IFM
Specifications.............. 12-156
Connecting to Allen-Bradley I/O is convenient with Allen-Bradley
Interface Modules and Cables. Unlike conventional terminal blocks,
they connect through pre-wired cables to digital and analog I/O for
the Bulletin 1746 SLC, Bulletin 1756 ControlLogix, Bulletin 1769
Compact I/O for CompactLogix and MicroLogix 1500, and Bulletin
1771/PLC-5 platforms. Limited solutions are also available for the
MicroLogix 1200 and 1500 base I/O and for the PowerFlex 700H
and 700S drives. The interface modules are mounted onto a
standard DIN #3 Rail. Pre-printed adhesive label cards containing
field-wiring information are available for each interface module and
I/O module combination. Wiring systems are available for over 100
different I/O modules and over 50 analog modules. In addition, we
offer a custom wiring system program for those applications that do
not meet your system requirements.
Reduced Wiring Time
8
Table of Contents
Wiring system cables are pre-tested to ensure 100% accurate
connections and eliminate the need for point-to-point checking of
wiring. No more crossed wires and loose connections between the
I/O module and the terminal block. Even one error in wiring 128 I/O
points in a point-to-point system may require a complete check of
the wiring. Wiring errors can take several minutes to track down and
correct before the panel is ready for startup. When IFMs and cables
are snapped in place, they fit every time — no need to find the
wrong or loose connection, resulting in a much higher rate of
success at system startup.
Faster Troubleshooting and Easier Maintenance
Normal terminal blocks can’t offer the benefits of IFMs, such as LED
indication on each I/O point. Wiring systems improve system startup
and ease troubleshooting and maintenance. Diagnostic capabilities
in the form of fuses, blown fuse indication, and field-side ON-State
LEDs — in a reduced space — allow maintenance personnel to
quickly locate faults, reduce downtime, and improve overall
productivity.
Reduced Wire Preparation and Routing
Pre-wired cables eliminate the time and costs associated with
stripping and cutting wires. Routing wires is much easier with wiring
systems, since engineers only have to worry about routing one prewired cable versus the 20 or 40 wires needed in the traditional
wiring method.
Labeling and Marking
Pre-printed, I/O-specific adhesive label strips for quick marking of
IFM terminals save labor compared with point-to-point wiring that
requires labor-intensive wire markers. Pre-wired cables require no
wire labels. Pre-printed I/O-specific labels ensure neat, easy-to-read
identification of wires and I/O points for all users.
The marking of traditional terminal blocks has even caused some
OEMs to move toward a high-tech approach of plotting markers,
requiring additional equipment in the form of a plotter system and a
PC to run the plotter software.
Simplified Design
Design engineers can simplify their panel drawings by calling out an
IFM and pre-wired cable instead of having to detail every single wire
and terminal block on their drawings. Simplified panel drawings aid
not only the installer, but also the end customer who receives the
panel.
Increased DIN Rail Density
An increasing trend in the industry is to pack more products into the
same DIN Rail space. Wiring systems support this trend, as they
require less DIN Rail space than traditional terminal blocks. For
example, if an OEM were to use a 40-point IFM in place of 40
terminal blocks, DIN Rail space can be reduced by more than 50%.
All IFMs have terminals for connecting the I/O field wiring. In
addition, extra terminal, sensor, fusible, and relay IFMs contain
common terminals that are used as power busses for sensor and
actuators. No additional terminal blocks are needed to provide
power to the sensors/actuators — saving valuable panel/DIN Rail
space.
To further reduce panel space, narrow IFMs (e.g., Cat. No. 1492IFM20FN) have been designed. They require 45% less space than
the standard length IFMs, making them well-suited for tightly
packed enclosures. The high density narrow IFMs have two rows of
10 field-wiring terminals with an overall length of 60 mm (2.36 in.)
Visit our website: www.ab.com/catalogs
12-118
Preferred availability cat. nos. are printed in bold
05_Programmable Controller_1492.qxd
4/30/2008
10:05 AM
Page 12-119
Bulletin 1492
Programmable Controller Wiring Systems
Overview, Continued
Quality-Looking Panels
Design Flexibility
The pre-wired cables and IFMs organize the wiring in your panel
and provide a consistent look. Pre-printed adhesive labels for the
terminals neatly identify field-wiring connections, which correspond
to the I/O module address. A large marking area is also available for
identifying I/O information on the IFM.
To develop a cost-effective system, the hardware components must
meet the needs of the design engineer. Rockwell Automation
provides the broadest range of digital and analog systems in the
industry. Allen-Bradley wiring wystems deliver a lower life cycle
cost.
Fewer Parts, Less Inventory, and Lower Carrying Cost
!
1
A wiring system involves an IFM and the cable, versus the block,
barrier, jumper, markers, wires, and swing arms associated with
traditional hardwired systems. Therefore, it requires fewer
components and, in turn, less inventory and lower carrying costs.
2
Digital Interface Modules (IFMs)
Digital IFMs are available with either a 20- or 40-pin cable
connector. This is determined by the number of connections
required for the I/O module.
Isolated IFMs have terminals isolated into 8 or 16 groups, which
allows each group of I/O devices to reference a different power
source. The extra terminal IFMs are beneficial in applications where
the I/O devices are terminated within the same panel as the I/O
modules — eliminating the need for many additional terminal
blocks.
3
4
5
40-pin Connection Interface Module
The number of terminals varies with the type of IFM — from one to
four terminals per I/O point.
Standard terminal IFMs provide one field-side wiring terminal per
programmable controller input or output point, as well as enough
terminals for the I/O module power connections. The standard
terminals are ideal for applications where the I/O device commons
are terminated in the field or remotely from the I/O panel.
6
Extra Terminal Interface Module
Sensor IFMs provide three field-side terminals per input point. The
middle and lower rows of the terminals are commoned together in
groups of 18, and serve as power busses for 3-wire sensor types of
devices — eliminating additional terminals, blocks, and jumpering
systems.
7
8
9
10
Standard Terminal Interface Module
Extra terminal IFMs provide two or four field-side terminals per
input or output point. Non-isolated IFMs have two terminals per
input or output point. Isolated IFMs have two or four terminals per
input or output.
11
Three-Level Sensor Terminal Interface Module
12
13
Visit our website: www.ab.com/catalogs
Preferred availability cat. nos. are printed in bold
12-119
05_Programmable Controller_1492.qxd
4/30/2008
10:05 AM
Page 12-120
Bulletin 1492
Programmable Controller Wiring Systems
Overview, Continued
!
Feed-Through Digital Interface Modules
LED-Indicating Digital Interface Modules
Feed-through IFMs provided the same capability as normal terminal
blocks, but in a more condensed package.
Voltage-indicating LEDs are available on standard, extra terminal,
and sensor IFMs. The LEDs provide field-side troubleshooting
diagnostics: the on/off status of an input device or the on/off status
of the programmable controller output circuit. When used in
conjunction with the logic-side programmable controller LEDs, the
IFM LEDs can help determine whether a problem resides in the I/O
module or in the field device/wiring. LED IFMs are available in both
Isolated (Cat. No. 1492-IFM20DS24-4) and non-Isolated (Cat. No.
1492-IFM20D120) versions for 24V, 120V, and 240V applications.
1
2
Feed-through Standard Terminal Products
For 20-point: Cat. No. 1492-IFM20F, 1492-IFM20FN
For 40-point: Cat. No. 1492-IFM40F
3
4
5
Feed-through Extra Terminal Products
For 20-point: Cat. No. 1492-IFM20F-2
For 40-point: Cat. No. 1492-IFM40F-2
6
LED Indicating Standard Terminal Products
For 20-point: Cat. No. 1492-IFM20D24, 1492-IFM20D120,
1492-IFM20D120N
For 40-point: Cat. No. 1492-IFM40D24
7
8
9
Feed-through Sensor Terminal Products
For 20-point: Cat. No. 1492-IFM20F-3
For 40-point: Cat. No. 1492-IFM40F-3
20-pin cable connector ON-state LED Narrow module for 24V:
Cat. No. 1492-IFM20D24N,
20-point LED module for 120V Cat. No. 1492-IFM20D120,
and 20-pin cable connector LED Isolated module for 24V:
Cat. No. 1492-IFM20DS24-4
10
11
12
Sensor Terminal IFM with 40-pin cable connector for 3-wire sensor
devices: Cat. No. 1492-IFM40F-3
and Standard Terminal Narrow IFM with 20-pin cable connector:
Cat. No.1492-IFM20FN
13
Visit our website: www.ab.com/catalogs
12-120
Preferred availability cat. nos. are printed in bold
05_Programmable Controller_1492.qxd
4/30/2008
10:05 AM
Page 12-121
Bulletin 1492
Programmable Controller Wiring Systems
Overview, Continued
connections. Fusible modules are available in both isolated (Cat. No.
1492-IFM20F-FS24-2) and nonisolated (Cat. No.1492-IFM20F-F242) versions. There are a select number of fusible IFMs available for
input modules.
!
1
LED Indicating Extra Terminal Products
For 20-point: Cat. No. 1492-IFM20D24-2, 1492-IFM20D24A-2,
1492-IFM20D120-2,
1492-IFM20D120A-2, 1492-IFM20D240-2, 1492-IFM20D240A-2
For 40-point: Cat. No. 1492-IFM40D24-2, 1492-IFM40D24A-2,
1492-IFM40D120-2,1492-IFM40D120A-2
2
LED Indicating Sensor Terminal Products
For 20-point: Cat. No. 1492-IFM20D24-3
For 40-point: Cat. No. 1492-IFM40D24-3
3
4
Fused Extra Terminal Products
For 20-point: Cat. No. 1492-IFM20F-F-2,1492-IFM20F-F24-2,
1492-IFM20F-F24A-2, 1492-IFM20F-F120-2, 1492-IFM20F-F120A-2, 1
492-IFM20F-F240-2, 1492-IFM20FS-F -2, 1492-IFM20FS-F24-2,
1492-IFM20FS-F24A-2
For 40-point: Cat. No. 1492-IFM40F-F-2, 1492-IFM40F-F24-2,
1492-IFM40F-F120-2, 1492-IFM40FS-F-2, 1492-IFM20FS-F24-2,
1492-IFM20FS-F120-2, 1492-IFM20FS-F24-4, 1492-IFM20FS-F24A-4,
1492-IFM20FS-F120-4, 1492-IFM20FS-F120A-4, 1492-IFM40FS-F240-4
LED Indicating 4 Terminal Products
For 20-point: Cat. No. 1492-IFM20DS24-4, 1492-IFM20DS120-4
For 40-point: Cat. No. 1492-IFM40DS24-4, 1492-IFM40DS24A-4,
1492-IFM40DS120-4, 1492-IFM40DS120A-4, 1492-IFM40DS240-4
5
6
7
8
Fused 4 Terminal Products
For 20-point: Cat. No. 1492-IFM20FS-F120-4, 1492-IFM20FS-F120A-4,
1492-IFM20FS-F240-4
For 40-point: Cat. No. 1492-IFM20FS-F24-4, 1492-IFM20FS-F24A-4,
1492-IFM20FS-F120-4, 1492-IFM20FS-F120A-4, 1492-IFM40FS-F240-4,
1492-IFM40F-FS240A-4
40-pin cable connector ON-state LED module for 24V:
Cat. No. 1492-IFM40D24
40-pin cable connector LED module for 120Vwith extra terminals:
Cat. No. 1492-IFM40D120-2
40-pin cable connector LED Isolated Input module for 24V:
Cat. No. 1492-IFM40DS24A-4
9
10
11
Fusible Digital IFMs
Fusible modules provide a convenient method of adding overcurrent
protections into your programmable controller wiring. These
modules have 5 x 20 fuse holders on-board and are available with
and without blown fuse indication. The 24V, 120V, and 240V blown
fuse indicators reduce the troubleshooting time to locate and
replace a blown fuse on the IFM. Fusible modules have an easy-toremove, transparent plexiglass cover that prevents objects from
contacting fuse circuitry under normal operation. Removal of fuses
from the standard fuse holder is aided by fuse pullers (fuses not
provided). The fusible modules also have two or four terminals per
I/O point to create a power bus for input and output load
12
40-pin cable connector Isolated Fusible module (no fuse blown
indication): Cat. No. 1492-IFM40F-FS-2
40-pin cable connector Isolated Fusible module with 24V blown fuse
indication: Cat. No. 1492-IFM40F-FS24A-2
Visit our website: www.ab.com/catalogs
Preferred availability cat. nos. are printed in bold
12-121
13
05_Programmable Controller_1492.qxd
4/30/2008
10:05 AM
Page 12-122
Bulletin 1492
Programmable Controller Wiring Systems
Overview, Continued
Relay Master/Expander XIMs Cat. No. Explanation for
Digital I/O Modules
!
1
2
Relay master and expander XIMs are available for Bulletin 1746,
1756, 1769, and 1771 digital output modules.
Relay Master XIM — Provides 8 or 16 relay outputs for a digital
output module. There are 16 relays with fusing.
Expander XIM — In addition to the relay master XIM, an expander
XIM provides eight additional outputs. There are three types of
expander XIMs: eight-channel relays, eight-channel fusing, and
eight-channel feed-through XIMs, sixteen channel relays, sixteen
channel relays with fusing.
Relay Expanders
Relay Expander (8 Outputs)
Relay Masters
Relay Master
Relay Expander Products
Cat. No. 1492-XIM24-8R,1492-XIM24-16RF,1492-XIM120-8R
3
Relay Expander (16 Outputs) with Fusing
4
5
6
Relay Master with Fusing
7
Relay Masters with Fuse Holders Products
For 20-point: Cat. No. 1492-XIM2024-16RF, 1492-XIM20120-16RF
For 40-point: Cat. No. 1492-XIM4024-16R
8
9
10
11
12
Relay Masters Products
For 20-point: Cat. No. 1492-XIM2024-8R, 1492-XIM2024-16R,
1492-XIM20120-8R, 1492-XIM20120-16R
For 40-point: Cat. No. 1492-XIM4024-16R
Relay expander XIMs feature field-replaceable relays with 120V or
24V rated coils. The field-side Form C contacts are rated 240V 10 A
(de-rated to 12 A per adjacent pair on the XIM). The Form C relay
output provides isolated output channels and a different voltage
level from one output channel to the next. Other features include
coil-side LED indicating the output module status, and transient
suppression on each coil. In addition, a relay expander can have
5x20 fuse holders so customers can fuse the output contacts. An
expander cable is provided for connection to the mating module.
Relay master XIMs feature field-replaceable relays with 120V or 24V
rated coils. The field-side Form C contacts are rated 240V 10 A (derated to 12 A per adjacent pair on the XIM). The Form C relay output
provides isolated output channels and a different voltage level from
one output channel to the next. Other features include coil-side LED
indicating the output module status, and transient suppression on
each coil. In addition, some relay masters have 5x20 fuse holders so
customers can fuse the output contacts.
13
Visit our website: www.ab.com/catalogs
12-122
Preferred availability cat. nos. are printed in bold
05_Programmable Controller_1492.qxd
4/30/2008
10:05 AM
Page 12-123
Bulletin 1492
Programmable Controller Wiring Systems
Overview, Continued
Relay and Expandable Digital Interface Modules, Continued
Fusible Expanders
The fusible expander modules feature eight 5 x 20 finger-safe fuse
holders, blown fuse indicators, and extra terminals for landing two
wires per field-side device. They are offered with eight fuse holders
for both 24V and 120V applications. An expander cable is provided
for connection to its mating module.
Digital IFM Modules with Field Removable Terminal Blocks
(RTBs)
Select groups of standard, fused, and relay digital 1492 wiring
system modules (refer to selection tables) have Field-Removable
Terminal Blocks (RTBs). This RTB feature can provide easier wiring
of field devices in a control cabinet where the IFM is located in a
hard-to-reach area, or where hand-access is limited. It can also
provide easier and faster replacement of a damaged or defective
Bul. 1492 wiring system module. The removable plug portion of the
RTB assembly has a screw at each end to securely fasten it to the
RTB socket, which is mechanically secured to the module circuit
board hand housing. Modules are shipped with the RTB socket, but
without the removable plug(s). Plugs are available with screw-style
or push-in style terminals and must be ordered separately. Refer to
the selection tables for the particular PLC I/O system of interest to
determine which modules are offered with field removable terminal
blocks.
All of the features available on fixed terminal block products (e.g.,
labels, agency certification, etc.) are also provided for the removable
terminal block 1492 wiring system modules.
!
1
2
3
4
Fused Expander Products
Cat. No. 1492-XIMF24-2, 1492-XIMF-120-2
Feed-Through Expanders
The feed-through expander modules feature eight channels with
extra terminals for landing two wires per field-side device. An
expander cable is provided for connection to its mating module.
5
6
7
8
Feedthrough Expander Products
Cat. No. 1492-XIMF-2
Digital Pre-Wired Cables
1492-Pre-wired cables are designed to minimize control wiring in a panel. Pre-wired cables, when used with an IFM, replace the point-topoint wiring between Allen-Bradley programmable controller I/O modules and individual terminal blocks. The pre-wired cables have a
removable terminal block or wiring arm at the PLC end of the cable and a cable connector on the other end to connect to the IFM. All of the
pre-wired cables use a #22 AWG wire and are 100% tested for continuity to make a perfect connection every time. The digital pre-wired
cables are offered in four standard lengths of 0.5, 1.0, 2.5, and 5.0 m to fit a variety of applications. Other length cables are also available as
build to order products. Pre-wired cables are available for many of the 1746 SLC I/O, 1756 ControlLogix I/O, 1769 Compact I/O, MicroLogix
1500 base I/O, MicroLogix 1200 (1762-L40xx) embedded I/O, and 1771 PLC-5 I/O.
9
10
11
12
13
Pre-wired Cable and Interface Module
Visit our website: www.ab.com/catalogs
Preferred availability cat. nos. are printed in bold
12-123
05_Programmable Controller_1492.qxd
4/30/2008
10:05 AM
Page 12-124
Bulletin 1492
Programmable Controller Wiring Systems
Overview, Continued
Ready-to-Wire Digital Cables
Digital I/O Ready Cable
!
1
I/O-ready cables have an I/O removable terminal block or wiring arm factory-wired to one end to of the cable and free connectors on the
other end for wiring into standard terminal blocks or other type of connectors. I/O-ready cables have individual color-coded conductors for
quick wire-to-terminal coordination. The I/O-ready cables use #18 AWG conductors for higher current applications or longer cable runs. The
I/O-ready cables are offered in standard lengths of 1.0, 2.5, and 5.0 m to fit a variety of applications. Other cable lengths are also available as
build-to-order products. Pre-wired cables are available for the Bulletin 1746 SLC I/O, Bulletin 1756 ControlLogix I/O, Bulletin 1769 Compact
I/O, MicroLogix 1500 base I/O, MicroLogix 1200 (1762-L40xx) embedded I/O, and Bulletin1771 PLC-5 I/O.
2
3
4
5
I/O-Ready Cable and Standard Terminal Blocks
IFM-Ready Cable
IFM-ready cables have a cable connector that attached to the IFM factory wired to one end and free connectors ready to wire to I/O modules
or other components on the other end. IFM-ready cables use #22 AWG wire and have individual color-coded conductors for quick wire-toterminal coordination. The digital IFM-ready cables are offered in standard lengths of 1.0, 2.5, and 5.0 m to fit a variety of applications. Other
cable lengths are also available as build-to-order products.
6
7
8
IFM-Ready Cable and Interface Module
9
Analog Interface Modules (IFMs)
Analog IFMs are available with either 15- or 25-pin D-Shell connections. This is determined by the number of connections that are required by
the I/O module.
Feed-Through Analog Interface Modules
10
Feed-through IFMs provide the same capability as normal terminal blocks but in a more condensed package. Standard terminal IFMs provide
three field-side wiring terminals per programmable controller analog input or output point, which includes enough terminals for the device
shield and power connections.
11
12
Standard Terminal 4-channel IFM with 15
connections: Cat. No. 1492-AIFM4-3
Isolated Standard Terminal 6-channel IFM with
25 connections: Cat. No. 1492-AIFM6S-3,
1492-AIFM8-3
13
Visit our website: www.ab.com/catalogs
12-124
Preferred availability cat. nos. are printed in bold
Standard Terminal 8-channel IFM with 25
connections for 3-wire sensor devices:
Cat. No. 1492-AIFM8-3
05_Programmable Controller_1492.qxd
4/30/2008
10:05 AM
Page 12-125
Bulletin 1492
Programmable Controller Wiring Systems
Overview, Continued
Fusible Analog Interface Modules
Fusible analog interface input modules provide a convenient method to fuse the input power source on the field side. The field-side power
source is distributed through individual on-board 5 x 20 fuse holders. The AIFMs have a 24V DC blown fuse indicators to reduce the
troubleshooting time required to locate and replace a blown fuse. Fusible modules have an easy-to-remove transparent plexiglass cover to
prevent objects from contacting fuse circuitry under normal operation. Standard fuse holders reside in the IFM, aiding in the removal of a fuse
with a fuse puller (fuses are not included). Isolation switch plugs, or “dummy fuses”, are also available to isolate an input circuit once power is
removed. In addition, once the circuit has been isolated and power restored, the input loop current can be measured in 2-wire transmitter
applications. The fusible modules also have three or five terminals per I/O analog input point to create a power bus for device shield and
power connections.
!
1
2
3
Analog Fused Products
Cat. No. 1492-AIFM4C-F-5, 1492-AIFM4F-F-5, 1492-AIFM8-F-5,
1492-AIFM16-F-3, 1492-AIFM16-F-5
Fused 4-channel module with 24V blown fuse indication, test points and
5 terminals per input: Cat. No. 1492-AIFM4I-F-5
8-channel input module with 24V blown fuse indication and 5 terminals
per input: Cat. No. 1492-AIFM8-F-5
4
5
6
7
Analog AIFM Modules with Field Removable Terminal
Blocks (RTBs)
Fused 16-channel module with 24V blown fuse indication, test points and
3 terminals per input: Cat. No. 1492-AIFM16-F-3
16-channel input module with 24V blown fuse indication and 5 terminals
per input
Select groups of analog 1492 wiring system modules (refer to
Selection Tables) have Field-Removable Terminal Blocks (RTBs).
This RTB feature can provide easier wiring of field devices in a
control cabinet where the IFM is located in a hard to reach area, or
where hand-access is limited. It can also provide easier and faster
replacement of a damaged or defective 1492 wiring system module.
The removable plug portion of the RTB assembly has a screw at
each end to securely fasten it to the RTB socket, which is
mechanically secured to the module circuit board and housing.
Modules are shipped with the RTB socket, but without the
removable plug(s). Plugs are available with screw style or push-in
style terminals and must be ordered separately. Refer to the
selection tables for the particular PLC I/O system of interest to
determine which modules are offered with field-removable terminals
blocks.
9
10
11
All of the features available on analog fixed terminal block products
(e.g., labels, agency certification, etc.) are also provided for the fieldremovable terminal block 1492 wiring system modules.
12
Thermocouple Analog Interface Modules
The Cat. No.1492-AIFM6TC-3 Thermocouple IFM for the Cat. No.
1756-IT6I ControlLogix I/O module provides on-board cold junction
compensation to allow thermocouples to be connected remotely
while still correcting for temperature at the termination point. The
combination thermistor and isothermal bar acquire temperature data
at the AIFM for the thermocouple to adjust the input value.
8
Thermocouple 6-channel module with isothermal bar and 3
terminals per output: Cat. No. 1492-AIFM6-TC-3
Visit our website: www.ab.com/catalogs
Preferred availability cat. nos. are printed in bold
12-125
13
05_Programmable Controller_1492.qxd
4/30/2008
10:05 AM
Page 12-126
Bulletin 1492
Programmable Controller Wiring Systems
Overview, Continued/Catalog Number Explanation
Analog Pre-Wired Cables
!
1
2
3
Bulletin 1492 pre-wired cables are designed to minimize control wiring in a panel. Pre-wired cables, when used with an analog IFM, replace
the point-to-point wiring between Allen-Bradley programmable controller I/O modules and individual terminal blocks. The pre-wired cables
have a removable terminal block or wiring arm from the PLC on one end of the cable and a D-Shell connector with a slide-locking mechanism
on the other to connect to the IFM. Most pre-wired cables use twisted pairs and all have shield to aid noise immunity of the low-level analog
signals. Most cables have a prepared drain wire with a ring lug at the I/O module end of the cable for convenient grounding of the cable
shield to the chassis. They are 100% tested for continuity to make a perfect connection every time. The analog pre-wired cables are offered
in four standard lengths of 0.5, 1.0, 2.5, and 5.0 m to fit a variety of applications. Other length cables are also available as build-to-order
products. Pre-wired analog cables are available for many of the Bulletin 1746 SLC I/O, Bulletin 1756 ControlLogix I/O, Bulletin 1769 Compact
I/O for MicroLogix 1500, and Bulletin 1771 PLC-5 I/O modules.
This catalog provides reference to catalog number selection and configuration. For the fastest and most complete 1492 Wiring System
Product Selection go to http://www.rockwellautomation.com/en/e-tools/. This tool will provide:
y Catalog number configuration of interface modules and appropriate pre-wired cables
y Field-side wiring diagrams for each interface module
y Pre-wired cable pinouts
y eCADWorks
y Label card information
y User documentation specification for each interface module
4
5
6
7
Selection Tables
Use of Selection Tables
y Locate I/O module required. The top row indicates the I/O module for the I/O platform.
y Locate the interface module required. The second and third column indicates the interface module catalog number.
y Determine if an interface module exists for the I/O module; indicated by “Letter Code” in row (interface catalog number) and the column (I/O
module).
y Locate cable. This is the letter indicated by “Letter Code” in the row (interface catalog number) and the column (I/O module). The “Letter
Code” represents the suffix of the pre-wired cable.
y Determine cable catalog number. Add 1492-CABLE_ _ _”Letter Code”, example 1492-CABLE_ _ _A.
y Determine length of cable required, standard lengths are 0.5, 1.0, 2.5, and 5.0 m; which represents 005, 010, 025 and 050 for _ _ _ in the
cable catalog number. Example 1492-CABLE010A = a 1.0 m cable with “Letter Code” A.
8
9
Important: The following cat. no. breakdown is for explanatory purposes only. It is not a product configurator. Not all combinations of fields
are valid cat. nos. Use this breakdown for verification and explanation only.
1492 – RTB
20 –
a
10
b
N
c
a
b
c
Removable Terminal Block Plug
Number of Poles/Terminal
Connector Style
11
Code
Code
Description
8
N
Screw Style
12
P
Push-in Style
14
16
17
12
20
13
Visit our website: www.ab.com/catalogs
12-126
Preferred availability cat. nos. are printed in bold
05_Programmable Controller_1492.qxd
4/30/2008
10:05 AM
Page 12-127
Bulletin 1492
Programmable Controller Wiring Systems
Catalog Number Explanation, Continued
Important: Use the following tables as a product confiurator for pre-wired, and I/O module-ready cables for Bulletin 1762 MicroLogix 1200
40 I/O controller digital I/O cables. All combination of these fields make valid product catalog numbers. Refer to selection tables for IFM
compatibility, additional cables, and ordering.
1492 – CAB
!
010 – A62
a
b
c
a
b
c
Digital Interface Cable
Standard or Build-to-Order Length Cables
Cable Type
Code
Length
005
0.5 m (1.64 ft)
Description
010
1.0 m (3.28 ft)
025
2.5 m (8.20 ft)
050
5.0 m (16.40 ft)
001-020
0.1...2.0 m
(0.328...6.56 ft)
0.1 m (0.328 ft
increments)
020-100
2.0...10.0 m
(6.56...32.8 ft)
0.5 m (1.64 ft
increments)
100-300
10.0...30.0 m
(32.8...98.42 ft)
1.0 m (3.28 ft
increments)
Code
1
Description
Pre-wired cables for Bulletin 1762 I/O
A62, B62
controllers
Standard Length
X62
I/O-ready cable for 1762-L40AWA,
and -L40BWA
T62
I/O-ready cable for 1762-L40AWA, L40BXB, and -L40BWA outputs
2
3
Build-to-Order
Length
4
5
Important: Use the following tables as a product confiurator for pre-wired, and I/O module-ready cables for Bulletin 1764 MicroLogix 1500
base unit digital I/O cables. All combination of these fields make valid product catalog numbers. Refer to selection tables for IFM
compatibility. additional cables, and ordering.
6
7
1492 – CAB
010 – A64
a
b
c
a
b
c
Digital Interface Cable
Standard or Build-to-Order Length Cables
Cable Type
Code
Length
005
0.5 m (1.64 ft)
010
1.0 m (3.28 ft)
025
2.5 m (8.20 ft)
050
5.0 m (16.40 ft)
001-020
0.1...2.0 m
(0.328...6.56 ft)
0.1 m (0.328 ft
increments)
020-100
2.0...10.0 m
(6.56...32.8 ft)
0.5 m (1.64 ft
increments)
100-300
10.0...30.0 m
(32.8...98.42 ft)
1.0 m (3.28 ft
increments)
Description
8
Code
Description
A64, B64,
C64, F64
Pre-wired cables for Bulletin 1764
I/O base units
W64
I/O-ready cable for 1762-24AWA,
and -24BWA base unit inputs
T64
I/O-ready cable for 1762-24AWA, 24BWA base units outputs
U64
I/O-ready cable for 1764-28BXB
base unit outputs
Standard Length
9
10
Build-to-Order
Length
11
12
13
Visit our website: www.ab.com/catalogs
Preferred availability cat. nos. are printed in bold
12-127
05_Programmable Controller_1492.qxd
4/30/2008
10:06 AM
Page 12-128
Bulletin 1492
Programmable Controller Wiring Systems
Catalog Number Explanation, Continued
Important: The following cat. no. breakdown is for explanatory purposes only. It is not a product configurator. Not all combinations of fields
are valid cat. nos. Use this breakdown for verification and explanation only.
The cables used for Relay Master/Expander XIMs are the same as those used for Digital I/O Modules with the exception of the Cat. No.
1746-OA16 output module, which uses the 1492-CABLE*CR cable.
!
1492 – IFM
a
1
2
5
b
c
2
d
a
c
d
Module Type (all types do not configure a
catalog number)
Number of Field Side Wiring Terminals
Code
Description
IFM
Digital Interface Modules with Fixed
Terminal Block
b
3
F-120 –
Modules
Digital Interface Modules with Removable
RIFM
Terminal Block
4
20
Digital Cable Connector Size
Code
Code
Description
Blank
One per I/O connection
(Standard Terminals)
2
Two per I/O connection
(Extra Terminals)
3
Three per I/O connection
(Sensor Terminals)
4
Four per I/O connection
(Special Terminal)
Description
A
Input Module
F
Feedthrough
F24
Fused 24 Volt
F120
Fused 120 Volt
FS
Fused Isolated
D
LEDs
Code
Description
N
Narrow
20
20 pins
24
24 Volt
40
40 pins
120
120 Volt
240
240 Volt
Important; The following AIFM Cat. No. breakdown is for explanation purposes only. It is not a product configurator. Not all combinations of
fields are valid product cat. nos. Use this breakdown for verification and explanation only.
1492 – AIFM 16-F – 5
a
6
7
b
c
a
b
c
Modules
Module Type (all types do not configure a
catalog number)
Number of Field Side Wiring Terminals
Code
Description
Description
3
Three per I/O channel
4
4 channel
5
Five per I/O channel
C
Combination
Code
Description
Analog Interface Module with Fixed
Terminal Block
Code
AIFM
RAIFM
Analog Interface Module with
Removable Terminal Block
6
6 channel
8
8
8 channel
16
16 channel
F
Fused
9
1492 – XIFM
10
11
a
b
c
c
d
Module Type (all types do not configure a
catalog number)
No. Cable Connector Pins
Description
XIM
Relay Interface Module with Fixed
Terminal Block
RXIM
Relay Interface Module with Removable
Terminal BLock
b
Code
Description
20
20 pins
40
40 pins
Blank
Expander module
Code
Description
Code
Description
2
2 terminals per point
F
24V relay coil
8R
8 relays
F-F24
5 x 20 mm fuse holders with 24V
blown fuse indication
16R
16 relays
5 x 20 mm fuse holders with 120V
blown fuse indication D
16RF
16 fused relays
F-F120
24
24V relay coil
120
120V relay coil
Visit our website: www.ab.com/catalogs
12-128
d
a
No. Cable Connector Pins
13
24 – 16RF
Modules
Code
12
20
Preferred availability cat. nos. are printed in bold
05_Programmable Controller_1492.qxd
4/30/2008
10:06 AM
Page 12-129
Bulletin 1492
Programmable Controller Wiring Systems
Catalog Number Explanation. Continued
IFM and XIM Cable Cat. No. Explanation for Digital I/O Modules
Important: Use the following tables as a product configurator for pre-wired, IFM-ready, and I/O module-ready cables for Bulletins 1746,
1756, and 1771 digital I/O module cables. All combinations of these fields make valid product cat. nos. Refer to selection tables for IFM/XIM
compatibility, additional cables, and ordering.
1492 – CABLE
a
c
1
c
Cable Type
Description
005
0.5 m (1.64 ft)
010
1.0 m (3.28 ft)
025
2.5 m (8.20 ft)
050
001…020
100…300
b
a
Standard or Build to Order Lengths
020…100
A
Digital Interface Cable
b
Code
010
Standard
Code
Description
A, B, C, D,
E, G, N, S
Pre-wired cables for 8-point isolated and 16-point Bulletin 1746 I/O modules9
CR
Pre-wired cable for Cat. No. 1764-OA16 (XIM only)
F, T
Pre-wired cable for digital Bulletin 1771 I/O modules7
FF
Pre-wired cable with fused wiring arm for 16-point digital Bulletin 1771 output
modules7
H
Pre-wired cable for 32-point digital Bulletin 1746 I/O modules9
J, K, L, M, R
Pre-wired cables for 16-point isolated and 32-point digital Bulletin 1771 I/O modules7
U, V, W, X
Pre-wired cable for 8- and 16-point digital Bulletin 1756 I/O modules‡
5.0 m (16.40 ft)
Y, Z
Pre-wired cable for 16-point isolated and 32-point digital Bulletin 1756 I/O modules‡
0.1…2.0 m
(0.328…6.56 ft)
0.1 m (0.328 ft
increments)
P
Digital IFM-ready cable with 20 conductors
2.0…10.0 m
(6.56…32.8 ft)
0.5 m (1.64 ft)
increments
10.0…30.0 m
(32.8…98.42 ft)
1.0 m (3.28 ft)
increments
Build-to-Order
!
Q
Digital IFM-ready cable with 40 conductors
N3
Digital I/O module-ready cable with 40-point Cat. No. 1746-N3 cable connector
RTBB
Digital I/O module-ready cable with 16-point Cat. No. 1746-RT25B terminal block
(blue)
RTBO
Digital I/O module-ready cable with 16-point Cat. No. 1746-RT25C terminal block
(orange)
RTBR
Digital I/O module-ready cable with 16-point Cat. No. 1746-RT25R terminal block (red)
TBCH
Digital I/O module-ready cable with 36-pin Cat. No. 1746-TBCH removable terminal
block
WA
Digital I/O module-ready cable with Cat. No. 1771-WA 8-point wiring arm
WD
Digital I/O module-ready cable with Cat. No. 1771-WD 6-point wiring arm
WH
Digital I/O module-ready cable with Cat. No. 1771-WH 16-point wiring arm
WHF
Digital I/O module-ready cable with Cat. No. 1771-WHF 16-point fused wiring arm
WN
Digital I/O module-ready cable with Cat. No. 1771-WN 32-point wiring arm
2
3
4
5
6
7
9 To make sure the Bulletin 1746 SLC 500 digital I/O module is compatible with IFM/XIM, refer to page 12-132.
7 To make sure the Bulletin 1771 PLC digital I/O module is compatible with IFM/XIM, refer to page 12-150.
‡ To make sure the Bulletin 1756 ControlLogix digital I/O module is compatible with IFM/XIM, refer to page 12-137.
8
9
10
11
12
13
Visit our website: www.ab.com/catalogs
Preferred availability cat. nos. are printed in bold
12-129
05_Programmable Controller_1492.qxd
4/30/2008
10:06 AM
Page 12-130
Bulletin 1492
Programmable Controller Wiring Systems
Catalog Number Explanation, Continued
IFM and XIM Cable Cat. No. Explanation for Digital I/O Modules
Important: Use the following tables as a product configurator for pre-wired, IFM-ready, and I/O module-ready cables for Bulletins 1746,
1756, and 1771 digital I/O module cables. All combinations of these fields make valid product cat. nos. Refer to selection tables for IFM/XIM
compatibility, additional cables, and ordering.
!
1492 – CAB
010
A
b
c
a
1
a
b
c
Digital Interface Cable
Standard or Build to Order Lengths
Cable Type
2
3
Code
Description
Code
Description
005
0.5 m (1.64 ft)
010
1.0 m (3.28 ft)
025
2.5 m (8.20 ft)
A69, B69, C69,
D69, E69, F69,
G69, H69, J69,
K69
Pre-wired cables for 8-, 16-,
and 32-channel
Bulletin 1769 digital I/O
modules
050
5.0 m (16.40 ft)
RTN18
001…020
0.1…2.0 m
(0.328…6.56 ft)
0.1 m (0.328 ft
increments)
I/O-ready cable with Cat. No.
1746-RTBN18
terminal block
RTN10
I/O-ready cable with Cat. No.
1746-RTBN10
terminal block
RTN32I
Pre-wired for 32-channel
1769-IQ32
RTN320
Pre-wired for 32-channel
1769-OB32
020…100
2.0…10.0 m
(6.56…32.8 ft)
0.5 m (1.64 ft)
increments
100…300
10.0…30.0 m
(32.8…98.42 ft)
1.0 m (3.28 ft)
increments
4
Standard
Build-to-Order
5
Pre-Wired Cable Cat. No. Explanation for Bulletins 1746, 1756, and 1771 Analog I/O Modules
6
Important: The following analog cable cat. no. breakdown is for explanation purposes only. It is not a product configurator. Not all
combinations of fields are valid product cat. nos. Use this breakdown for verification and explanation only.
1492 – ACABLE
7
a
8
9
10
A
b
c
a
b
c
Analog Interface Cables
Standard or Build-to-Order Length Cable
A-Cable Type
Code
Description
005
0.5 m (1.64 ft)
010
1.0 m (3.28 ft)
025
2.5 m (8.20 ft)
050
5.0 m (16.40 ft)
001-020
0.1…2.0 m
(0.328…6.56 ft)
0.1 m (0.328 ft
increments)
020-100
2.0…10.0 m
(6.56…32.8 ft)
0.5 m (1.64 ft)
increments
100-300
11
010
Standard
Description
A, B, C, D,
L, Q
Pre-wired cables for Bulletin
1746 analog and RTD I/O
modules.
E, F, G, H, J
Pre-wired cables for Bulletin
1771 analog and RTD I/O
modules.
TA, TB, TC,
TD, UA, UB,
UC, UD, VA,
VB, WA, WB,
X, Y, Z
Pre-wired cables for Bulletin
1756 analog, RTD, and
thermocouple I/O modules.
YT
Pre-wired cable for Bulletin
1756 thermocouple I/O
modules.
M
Pre-wired cables for Bulletin
1757 pulse input I/O modules
Build-to-Order
10.0…30.0 m
(32.8…98.42 ft)
1.0 m (3.28 ft)
increments
12
13
Visit our website: www.ab.com/catalogs
12-130
Code
Preferred availability cat. nos. are printed in bold
05_Programmable Controller_1492.qxd
4/30/2008
10:06 AM
Page 12-131
Bulletin 1492
Programmable Controller Wiring Systems
Catalog Number Explanation, Continued
Pre-Wired Cable Cat. No. Explanation for Bulletin 1746 and 1769 Analog I/O Modules
Important: Use the following tables as a product configurator for pre-wired, IFM-ready, and I/O module-ready cables for Bulletins 1746,
1756, and 1771 digital I/O module cables. All combinations of these fields make valid product cat. nos. Refer to selection tables for IFM/XIM
compatibility, additional cables, and ordering.
1492 – ACAB
a
005
A46
b
c
1
a
b
c
Analog Interface Cables
Standard or Build-to-Order Length Cable
Cable Type
Code
Description
005
0.5 m (1.64 ft)
010
1.0 m (3.28 ft)
025
2.5 m (8.20 ft)
050
5.0 m (16.40 ft)
001-020
0.1…2.0 m
(0.328…6.56 ft)
0.1 m (0.328 ft
increments)
020-100
2.0…10.0 m
(6.56…32.8 ft)
0.5 m (1.64 ft)
increments
100-300
10.0…30.0 m
(32.8…98.42 ft)
1.0 m (3.28 ft)
increments
!
Code
Description
A46
Pre-wired cables for Bulletin
1746-NI16I and -NI16V analog
modules.
AA69, AB69,
BA69, BB69,
BC69, BD69,
C69, D69,
EA69, EB69,
EC69, ED69
Pre-wired cables for Bulletin
1769 analog I/O modules.
Standard
2
3
4
Build-to-Order
5
Σελεχτινγ α Ωιρινγ Σψστεμ
6
7
8
9
10
11
12
13
Visit our website: www.ab.com/catalogs
Preferred availability cat. nos. are printed in bold
12-131
01_1746_Digital.qxd
4/30/2008
9:55 AM
Page 12-132
Bulletin 1492
Programmable Wiring Systems
Product Selection
Bulletin 1746 SLC 500 IFM/XIM and Cable Selection Table
Digital 16-Point and 8-Point Isolated I/O Modules 7
!
I/O Module Cat. No. 1746-…
1
Description of 20-Pin
IFM
Cat. No. for Wiring
System Module with
Fixed Terminal Block
I I I I I I I
Cat. No. for Module with A B C G H M N
Removable Terminal Block 1 1 1 1 1 1 1
(RTB)
6 6 6 6 6 6 6
I
T
B
1
6
I
T
V
1
6
O
I O O B
V A B 1
1 1 1 6
6 6 6 E
O
B
P
1
6
O
G
1
6
O
V
1
6
O
V
P
1
6
s
cI
O
A
W O 8
1 X I
6 8 ‡
s
cI
B
8
I
‡
s
c
I
C
8
I
‡
s
c
O
A
P
8
1
‡
Feed-through
2
3
Standard 264V AC/DC
Max.
1492-IFM20F
1492-RIFM20Fa
A B B E B A B B B B C E
E
E
E
E
E D D A B B A
Narrow standard 132V
AC/DC Max.
1492-IFM20FN
1492-RIFM20FN
A B B E B — B B B B G E
E
E
E
E
E N N A B B A
Extra terminals (2 per
I/O) 264V AC/DC Max.
1492-IFM20F-2
1492-RIFM20F-2a
A B B E B A B B B B C E
E
E
E
E
E D — — — — —
3-wire sensor type
input devices 132V
AC/DC Max.
1492-IFM20F-3
—
A B B E B — B B B B — — — — — — — — — — — — —
LED Indicating
4
5
6
7
Standard with 24V
AC/DC LEDs
1492-IFM20D24
—
— B — — — — B B B B — E
E
E — E
Narrow standard with
24V AC/DC LEDs
1492-IFM20D24N
—
— B — — — — B B B B — E
E
E — — — N — — — — —
Standard with 120V
AC/DC LEDs
1492-IFM20D120§
—
A — — — B — — — — — C — — — — — — D — — — — —
Narrow standard with
120V AC LEDs
1492-IFM20D120N
—
A — — — — — — — — — G — — — — — — N — — — — —
24V AC/DC LEDs and
extra terminals for
outputs
1492-IFM20D24-2
—
— — — — — — — — — — — E
24V AC/DC LEDs and
extra terminals for
inputs
1492-IFM20D24A-2
—
— B — — — — B B B B — — — — — — — — — — — — —
120V AC LEDs and
extra terminals for
outputs
1492-IFM20D120-2
—
— — — — — — — — — — C — — — — — — D — — — — —
120V AC LEDs and
extra terminals for
inputs
1492-IFM20D120A-2
—
A — — — — — — — — — — — — — — — — — — — — — —
3-wire sensor with 24V
AC/DC LEDs
8
9
10
E
E — E
E D — — — — —
E D — — — — —
1492-IFM20D24-3
—
— B — — — — B B B B — — — — — — — — — — — — —
8 Individually isolated
with 24/48V AC/DC
LEDs and 4
terminals/output
1492-IFM20DS24-4
—
— — — — — — — — — — — — — — — — — — S — — — —
8 Individually isolated
with 120V AC LEDs
and 4 terminals/output
1492-IFM20DS120-4
—
— — — — — — — — — — — — — — — — — — S — — — —
240V AC LEDs and
extra terminals for
outputs
1492-IFM20D240-2
—
— — — — — — — — — — C — — — — — — D — — — — —
240V AC LEDs and
extra terminals for
inputs
1492-IFM20D240A-2
—
— — — — — A — — — — — — — — — — — — — — — — —
Fusible
11
12
13
120V AC/DC with extra
terminals for outputs
1492-IFM20F-F-2
1492-RIFM20F-F-2a
— — — — — — — — — — C E
E
E — E
E D — — — — —
Extra terminals with
24V AC/DC blown fuse
LED indicators
1492-IFM20F-F24-2
1492-RIFM20F-F24-2a
— — — — — — — — — — — E
E
E — E
E D — — — — —
Extra terminals with
120V AC/DC blown
fuse LED indicators
1492-IFM20F-F120-2
1492-RIFM20F-F120-2a
— — — — — — — — — — C — — — — — — D — — — — —
Extra terminals with
240V AC/DC blown
fuse LED indicators
1492-IFM20F-F240-2
—
— — — — — — — — — — C — — — — — — D — — — — —
Extra terminals with
24V AC/DC blown fuse
LED indicators for
inputs
1492-IFM20F-F24A-2
1492-RIFM20F-F24A-2a
— B — — — — B B — — — — — — — E
Note: Footnotes are on page 12-134.
Visit our website: www.ab.com/catalogs
12-132
Preferred availability cat. nos. are printed in bold
E — — — — — —
01_1746_Digital.qxd
4/30/2008
9:56 AM
Page 12-133
Bulletin 1492
Programmable Wiring Systems
Product Selection, Continued
I/O Module Cat. No. 1746-…
Description of 20-Pin
IFM
Cat. No. for Wiring
System Module with
Fixed Terminal Block
Cat. No. for Module with
Removable Terminal
Block (RTB)
I I I I I I I
A B C G H M N
1 1 1 1 1 1 1
6 6 6 6 6 6 6
I
T
B
1
6
I
T
V
1
6
O
I O O B
V A B 1
1 1 1 6
6 6 6 E
O
B
P
1
6
O
G
1
6
O
V
1
6
O
V
P
1
6
s
cI
O
A
W O 8
1 X I
6 8 ‡
s
cI
B
8
I
‡
s
c
I
C
8
I
‡
s
c
O
A
P
8
1
‡
!
1
Fusible
Extra terminals with
120V AC/DC blown
fuse LED indicators for
inputs
1492-IFM20F-F120A-2
8 Individually isolated
120V AC/DC with extra
terminals for outputs
1492-IFM20F-FS-2
—
— — — — — — — — — — — — — — — — — — S — — — —
8 Individually isolated
with extra terminals and
24V AC/DC blown fuse
LED indicators
1492-IFM20F-FS24-2
—
— — — — — — — — — — — — — — — — — — S — — — —
Two 4-point isolated
groups with four
terminals/input and 24V
AC/DC blown fuse LED
indicators
1492-IFM20F-FS24A-4
—
— — — — — — — — — — — — — — — — — — — — — — —
8 Individually isolated
with extra
terminals/output and
120V AC/DC blown
fuse LED indicators
1492-IFM20F-FS120-2
—
— — — — — — — — — — — — — — — — — — S — — — A
8 Individually isolated
with 4 terminals/output
and 120V AC/DC blown
fuse LED indicators
1492-IFM20F-FS120-4
—
— — — — — — — — — — — — — — — — — — S — — — —
1492-IFM20F-FS120A-4
—
— — — — — — — — — — — — — — — — — — — — — — —
1492-IFM20F-FS240-4
—
— — — — — — — — — — — — — — — — — — S — — — A
Two 4-point isolated
groups with four
terminals/input and
120V AC/DC blown
fuse indicators
8 Individually isolated
with 4 terminals/output
and 240V AC/DC blown
fuse LED indicators
1492-RIFM20F-F120A-2a A — — — B — — — — — — — — — — — — — — — — — —
2
3
4
5
6
7
Relay Master (LED Indicating) ♣³
20-pin master with
eight (8) 24V DC relays
1492-XIM2024-8R
—
— — — — — — — — — — — E
20-pin master with
eight (8) 120V AC relays
1492-XIM20120-8R
—
— — — — — — — — — —
20-pin master with
sixteen (16) 24V DC
relays
1492-XIM2024-16R
—
— — — — — — — — — — — E
E
E — — — — — — — — —
20-pin master with
sixteen (16) 24V DC
relays with fusing
1492-XIM2024-16RF
—
— — — — — — — — — — — E
E
E — — — — — — — — —
20-pin master with
sixteen (16) 120V AC
relays
1492-XIM20120-16R
—
— — — — — — — — — —
C
— — — — — — — — — — — —
R
20-pin master with
sixteen (16) 120V AC
relays with fusing
1492-XIM20120-16RF
—
— — — — — — — — — —
C
— — — — — — — — — — — —
R
E
E — — — — — — — — —
C
— — — — — — — — — — — —
R
8
9
10
Relay Expander (LED Indicating) ♣³
Expander with eight (8)
24V DC relays
1492-XIM24-8R
1492-RXIM24-8R
Expander with eight (8)
120V AC relays
1492-XIM120-8R
—
— — — — — — — — — — — 9
9
9 — — — — — — — — —
— — — — — — — — — — 9 — — — — — — — — — — — —
11
Fusible Expander
8-channel expander
with 24V DC blown
fuse indicators
1492-XIMF-F24-2
—
— — — — — — — — — — — 9
8-channel expander
with 120V AC blown
fuse indicators
1492-XIMF-F120-2
—
— — — — — — — — — — 9 — — — — — — — — — — — —
9
9 — — — — — — — — —
Note: Footnotes are on page 12-134.
12
13
Visit our website: www.ab.com/catalogs
Preferred availability cat. nos. are printed in bold
12-133
01_1746_Digital.qxd
4/30/2008
9:56 AM
Page 12-134
Bulletin 1492
Programmable Wiring Systems
Product Selection, Continued
I/O Module Cat. No. 1746-…
!
1
2
3
Description of 20-Pin
IFM
Cat. No. for Wiring
System Module with
Fixed Terminal Block
Expander with eight (8)
feed-through channels
132V AC/DC max
I I
I I I I I I I T T
Cat. No. for Module with A B C G H M N B V
Removable Terminal Block 1 1 1 1 1 1 1 1 1
(RTB)
6 6 6 6 6 6 6 6 6
Feed-through Expander
—
1492-XIMF-2
I
V
1
6
sc
O O
I
O
O O B B O O V O
A
A B 1 P G V P W O 8
1 1 6 1 1 1 1 1 X I
6 6 E 6 6 6 6 6 8 ‡
— — — — — — — — — — 9
9
9
9
sc
I
B
8
I
‡
s
s c
c O
I A
C P
8 8
I 1
‡ ‡
— — — — — — — — A
9 Can have up to 1 expandable module depending upon master used (total 16 pts or less), extender cable is provided.
7 Pre-wired cables are available in standard length of 0.5, 1.0, 2.5, and 5.0 m. To order, insert the code for the desired cable length into the catalog number
005 = 0.5 m (010 = 1.0 m, 025 = 2.5 m, and 050 = 5.0 m), and insert the letter in the box. Example: Catalog Number 1402-CABLE050A is for a 5.0 m cable,
and the letter A.
‡ For information concerning this I/O module, contact Spectrum Controls (phone: 425.641.9473 or www.spectrumcontrols.com).
§ This IFM is not recommended for use with PLC I/O modules that have an off-state leakage current exceeding 0.5 mA. Use a Cat. No. 1492-IFM20D120N or
1492-IFM20D120A-2 for inputs. Use 1492-IFM20D120-2 for outputs.
³ The LED indicates the PLC output status.
a Compatible RTB plug 1492-RTB20N (screw style terminal) or 1492-RTB20P. Order plugs separately. Two plugs per catalog number.
 Compatible RTB plug 1492-RTB10N (screw style terminal) or 1492-RTB10P. Order plugs separately. Two plugs per catalog number.
4
Bulletin 1746 Digital 32-Point I/O Modules 7
I/O Module Cat.
No. 1746-…
5
Cat. No. for Wiring
System Module with
Fixed Terminal Block
Description of 40-Pin IFM
6
Cat. No. for Wiring System
Module with Removable
Terminal Block Socket
Assembly (order plugs
separately)
I
B
3
2
I
V
3
2
O
O B O
B 3 V
3 2 3
2 E 2
Feed-through
Standard 132V AC/DC Max.
H H H H H
1492-IFM40F
1492-RIFM40F³
Extra terminals (2 per I/O) 132V AC/DC Max.
1492-IFM40F-2
1492-RIFM40F-2³
H H H H H
3-wire sensor type input devices 60V AC/DC Max.
1492-IFM40F-3
—
H H — — —
LED Indicating
7
1492-IFM40D24
1492-RIFM40D24³
H H H H H
24V AC/DC LEDs and extra terminals for outputs
1492-IFM40D24-2
—
— — H H H
24V AC/DC LEDs and extra terminals for inputs
1492-IFM40D24A-2
1492-RIFM40D24A-2³
H H — — —
120V AC LEDs and extra terminals for outputs
1492-IFM40D120-2
—
— — — — —
1492-IFM40D120A-2
—
— — — — —
1492-IFM40D24-3
—
H H — — —
1492-IFM40DS24-4
—
— — — — —
16 Individually isolated with 24V AC/DC LEDs and four terminals/input
1492-IFM40DS24A-4
—
— — — — —
16 Individually isolated with 120V AC LEDs and four terminals/output
1492-IFM40DS120-4
—
— — — — —
16 Individually isolated with 120V AC LEDs and four terminals/input
1492-IFM40DS120A-4
—
— — — — —
16 Individually isolated with 240V AC LEDs and four terminals/input
1492-IFM40DS240A-4
—
— — — — —
— — H H H
Standard with 24V AC/DC LEDs
120V AC LEDs and extra terminals for inputs
8
9
3-wire sensor with 24V AC/DC LEDs
16 Individually isolated with 24/48V AC/DC LEDs and four terminals/output
Fusible
120V AC/DC with extra terminals for 32-point outputs
Extra terminals with 24V AC/DC blown fuse indicators for 32-point outputs
10
11
12
Extra terminals with 120V AC/DC blown fuse indicators for outputs
16 Individually isolated with extra terminals for 120V AC/DC outputs
—
1492-RIFM40F-F24-2³
— — H H H
1492-IFM40F-F120-2
—
— — — — —
1492-IFM40F-FS-2
—
— — — — —
16 individually isolated with extra terminals and 24V AC/DC blown fuse indicators
1492-IFM40F-FS24-2
—
— — — — —
16 Individually isolated with 24V AC/DC blown fuse indicators and four terminals/output
1492-IFM40F-FS24-4
—
— — — — —
16 Individually isolated 240V AC/DC with four terminals/output
1492-IFM40F-FS-4
—
— — — — —
16 Individually isolated with extra terminals and 120V AC/DC blown fuse LED indicators
1492-IFM40F-FS120-2
1492-RIFM40F-FS120-2³
— — — — —
16 Individually isolated with 120V AC/DC blown fuse indicators and four terminals/output
1492-IFM40F-FS120-4
1492-RIFM40F-FS120-4a
— — — — —
16 Individually isolated with 240V AC/DC blown fuse indicators and four terminals/output
1492-IFM40F-FS240-4
—
— — — — —
16 Individually isolated with 24V AC/DC blown fuse indicators and four terminals/input
1492-IFM40F-FS24A-4
—
— — — — —
16 Individually isolated with 120V AC/DC with four terminals/input
13
1492-IFM40F-F-2
1492-IFM40F-F24-2
1492-IFM40F-FSA-4
—
— — — — —
16 Individually isolated with 120V AC/DC blown fuse indicators and four terminals/input
1492-IFM40F-FS120A-4
1492-RIFM40F-FS120A-4a
— — — — —
16 Individually isolated with 240V AC/DC blown fuse indicators and four terminals/input
1492-IFM40F-FS240A-4
—
— — — — —
Visit our website: www.ab.com/catalogs
12-134
Preferred availability cat. nos. are printed in bold
01_1746_Digital.qxd
4/30/2008
9:56 AM
Page 12-135
Bulletin 1492
Programmable Wiring Systems
Product Selection, Continued
I/O Module Cat.
No. 1746-…
Cat. No. for Wiring
System Module with
Fixed Terminal Block
Description of 40-Pin IFM
Cat. No. for Wiring System
Module with Removable
Terminal Block Socket
Assembly (order plugs
separately)
O
I I O B
B V B 3
3 3 3 2
2 2 2 E
O
V
3
2
Relay Master (LED Indicating) §♣
1492-XIM4024-8R
—
— — H H —
40-pin master with sixteen (16) 24V DC relays
1492-XIM4024-16R
1492-RXIM4024-16R
— — H H —
40-pin master with sixteen (16) 24V DC relays with fusing
1492-XIM4024-16RF
—
— — H H —
40-pin master with eight (8) 24V DC relays
Relay Expander (LED Indicating) §♣
1492-XIM24-8R
1492-RXIM24-8R™
— — 9
9 —
1492-XIM24-16RF
—
— — ‡
‡ —
1492-XIM120-8R
—
— — — — —
8-channel expander with 24V DC blown fuse indicators
1492-XIMF-F24-2
—
— — 9
8-channel expander with 120V AC blown fuse indicators
1492-XIMF-F120-2
—
— — — — —
—
— — 9
Expander with eight (8) 24V DC relays
Expander with sixteen (16) 24V DC relays with fusing
Expander with eight (8) 120V AC relays
!
1
2
Fusible Expander
9 —
3
Feed-through Expander
Expander with eight (8) feed-through channels 132V AC/DC max
1492-XIMF-2
9 —
9 Can have up to 2 or 3 expandable modules depending upon master used (total 32 pts or less), extender cable is provided.
7 Pre-wired cables are available in standard length of 0.5, 1.0, 2.5, and 5.0 m. To order, insert the code for the desired cable length into the catalog number 005
= 0.5 m (010 = 1.0 m, 025 = 2.5 m, and 050 = 5.0 m), and insert the letter in the box. Example: Catalog Number 1402-CABLE050A is for a 5.0 m cable, and
the letter A.
‡ 1492-XIM24-16RF is to be used with 1492-XIM4024-16R and 1492-XIM4024-16RF 32 pt. only.
♣ The LED indicates the PLC output status.
³ Compatible RTB plug; 1492-RTB20N (screw style terminal) or 1492-RTB20P. ORDER PLUGS SEPARATELY. Two plugs per cat. no.
a Compatible RTB plug; 1492-RTB17N (screw style terminal) or 1492-RTB17P. ORDER PLUGS SEPARATELY. Two plugs per cat. no.
 Compatible RTB plug; 1492-RTB14N (screw style terminal) or 1492-RTB14P. ORDER PLUGS SEPARATELY. Two plugs per cat. no.
™ Compatible RTB plug; 1492-RTB12N (screw style terminal) or 1492-RTB12P. ORDER PLUGS SEPARATELY. Two plugs per cat. no.
4
5
6
Bulletin 1746 SLC 500 IFMs and Cables, Continued
These pre-wired cables have a pre-wired RTB on one end to connect to the front of a Bulletin 1746 digital I/O module and a connector on
the other end to plug into a 20- or 40-terminal IFM/XIM. You must first select the IFM/XIM from one of the preceding selection tables.
Pre-Wired Cables for Bulletin 1746 Digital I/O Modules
Cable Cat. No.
Standard Cable Lengths
Build-to-Order
Available
7
No. of Conductors
Mating I/O Module Cat. No.
1492-CABLE9A
0.5, 1.0, 2.5, 5.0 m
Yes
20
1746-IA16, -IM16
1492-CABLE9B
0.5, 1.0, 2.5, 5.0 m
Yes
20
1746-IB16, -IH16, -IN16, -ITB16, -ITV16
1492-CABLE9C
0.5, 1.0, 2.5, 5.0 m
Yes
20
1746-OA16
1492-CABLE9CR
0.5, 1.0, 2.5, 5.0 m
Yes
20
1746-OA16
8
1492-CABLE9D
0.5, 1.0, 2.5, 5.0 m
Yes
20
1746-OW16, -OX8
1492-CABLE9E
0.5, 1.0, 2.5, 5.0 m
Yes
20
1746-IG16, -OB16, -OB16E, -OBP16, -OG16, -OV16, -OVP16
1492-CABLE9G
0.5, 1.0, 2.5, 5.0 m
Yes
20
1746-OA16
1492-CABLE9H
0.5, 1.0, 2.5, 5.0 m
Yes
40
1746-IB32, -IV32, -OB32, -OB32E, -OV32
1492-CABLE9N
0.5, 1.0, 2.5, 5.0 m
Yes
20
1746-OW16, -OX8
1492-CABLE9S
0.5, 1.0, 2.5, 5.0 m
Yes
20
1746-OX8
9 Pre-wired cables are available in standard lengths of 0.5, 1.0, 2.5, and 5.0 m. To order, insert the code for the desired cable length into the cat. no. (005 = 0.5
m, 010 = 1.0 m, 025 = 2.5 m, and 050 = 5.0 m). Example: Cat. No. 1492-CABLE005N is for a 0.5 m cable that could be used to connect a Cat. No. 1492IFM20D24N IFM to a Cat. No. 1746-OW16 I/O module. Build-to-order lengths are also available.
9
10
The I/O module-ready cables have a pre-wired RTB on one end to plug onto the front of a Bulletin 1746 I/O module and 20 or 40
individually colored #18 AWG conductors on the other end. These cables provide the convenience of pre-wired connections at the I/O
module end, while still allowing the flexibility to fieldwire to standard terminal blocks of your choice.
11
I/O Module-Ready Cables for Bulletin 1746 Digital I/O Modules ‡
Cable Cat. No.
Standard Cable Lengths
Build-to-Order
Available
No. of Conductors
Mating I/O Module Cat. No.
7N3
1492-CABLE7
1.0, 2.5, 5.0 m
Yes
40
1746-IB32, -IV32, -OB32, -OB32E, -OV32
7RTBB
1492-CABLE7
1.0, 2.5, 5.0 m
Yes
20
1746-IB16, -IC16, -IG16, -IH16, -IN16, -ITB16, -ITV16, -IV16,
-OB16, -OB16E, -OBP8, -OBP16, -OG16, -OV16, -OVP16
1492-CABLE7RTBO
1.0, 2.5, 5.0 m
Yes
20
1746-OW16, -OX8
7RTBR
1492-CABLE7
1.0, 2.5, 5.0 m
Yes
20
1746-IA16, -OA16, -OAP12, -IM16
7 I/O ready cables are available in standard lengths of 1.0, 2.5, and 5.0 m. To order, insert the code for the desired cable length into the cat. no. (010 = 1.0 m, 025
= 2.5 m, and 050 = 5.0 m). Example: Cat. No. 1492-CABLE050RTBR is for a 5.0 m cable with a pre-wired Cat. No. 1746-RT25R RTB on one end.
‡ Digital I/O module-ready cables should not be used with analog module as a cable shield and drain wire is not provided.
Visit our website: www.ab.com/catalogs
Preferred availability cat. nos. are printed in bold
12-135
12
13
01_1746_Digital.qxd
4/30/2008
9:57 AM
Page 12-136
Bulletin 1492
Programmable Wiring Systems
Product Selection, Continued
Bulletin 1746 SLC 500 AIFM and Cable — Selection Table
Analog I/O Modules 9
!
NI16V
NI16I
QS
NR4
NO8V
NO8I
NO4V
NO4I
A — L
NIO4V
L
NI8
NI4
— — L
NIO4I
FIO4I
FIO4V
Description of AIFM
HSCE (IDiff.)
1
HSCE2 (Diff.)
I/O Module Cat. No. 1746-…
Cat. No. for Wiring
System Module with
Removable Terminal
Cat. No. for Wiring
Block Socket
System Module with
Assembly (order
Fixed Terminal Block
plugs separately)
Feed-through
4-channel input, output or 2-in/2-out combination
with 3 terminals/channel
2
6-channel isolated with 3…4 terminals/channel
8-channel differential 16-channel single-ended with 3
terminals/channel
1492-AIFM4-3
1492-RAIFM4-3‡
L B — B — — —
—
—
1492-AIFM6S-3
1492-RAIFM6S-3§
— — — — — — — — — — — — D —
—
—
1492-AIFM8-3
1492-RAIFM8-3♣
— — — — — C — — — R — R — — A46 A46
Thermocouple
3
6-channel with 3 terminals/channel7
1492-AIFM6TC-3
—
— — — — — — — — — — — — — —
—
—
K P — — — — — — — — — — — —
—
—
K P — — — — — — — — — — — —
—
—
High-Speed Counter/Encoder
2-channel counter input/4 outputs
1492-AIFMCE4
—
Fused High-Speed Counter/Encoder
2-channel fused counter input/4 fused outputs
4
5
6
1492-AIFMCE4-F
—
Fusible Analog
2-channel output, 2-channel input with 24V blown
fuse indicators, test points, 5 terminals/input, 3
terminals/output
1492-AIFM4C-F-5
—
— — L
L — — — — — —
—
—
4-channel with 24V blown fuse indicators, test
points, 5 terminals/input
1492-AIFM4I-F-5
—
— — — — A — — — — — — — — —
—
—
8-channel with 24V DC blown fuse indicators, 5
terminals/channel
1492-AIFM8-F-5
—
— — — — — C — — — — — — — —
—
—
16-channel input with 24V DC blown fuse indicators,
3 terminals/channel
1492-AIFM16-F-3
—
— — — — — — — — — — — — — — A46 A46
16-channel input with 24V DC blown fuse inidcators,
5 terminals/channel
1492-AIFM16-F-5
—
— — — — — — — — — — — — — —
—
—
1492-AIFMQS
—
— — — — — — — — — — — — — Q
—
—
4-input/4-output channel with 8 fuses and 24V
blown fuse indicators
L — — L
9 Pre-wired cables are available in standard length of 0.5, 1.0, 2.5, and 5.0 m. To order, insert the code for the desired cable length into the catalog number 005
7
= 0.5 m (010 = 1.0 m, 025 = 2.5 m, and 050 = 5.0 m), and insert the letter in the box. Example: Cat. No. 1402-ACABLE025A46 is for a 2.5 m cable, and the
letter A.
7 Cannot be used with SLC I/O.
‡ Compatible RTB plug 1492-RTB8N (screw style terminal) or 1492-RTB8P. Order plugs separately.
§ Compatible RTB plug 1492-RTB12N (screw style terminal) or 1492-RTB12P. Order plugs separately.
♣ Compatible RTB plug 1492-RTB16N (screw style terminal) or 1492-RTB16P. Order plugs separately.
8
These pre-wired cables have a pre-wired RTB on one end to connect to the front of a Bulletin 1746 analog I/O module and a connector on
the other end to plug into a 20- or 40-terminal IFM. To use this table, you must first select an IFM from the preceding table.
9
10
11
Pre-Wired Cables for Bulletin 1746 Analog I/O Modules
Cable Cat. No.
Standard Cable Lengths (m)
Build-to-Order Available
AIFM Connector
1492-ACABLE9A
0.5, 1.0, 2.5, 5.0 m
Yes
15-pin D-shell
Mating I/O Module Cat. No.
1746-NI4
1492-ACABLE9B
0.5, 1.0, 2.5, 5.0 m
Yes
15-pin D-shell
1746-NO4I, -NO4V
1492-ACABLE9C
0.5, 1.0, 2.5, 5.0 m
Yes
25-pin D-shell
1746-NI8
1492-ACABLE9D
0.5, 1.0, 2.5, 5.0 m
Yes
25-pin D-shell
1746-NR4
1492-ACABLE9K
0.5, 1.0, 2.5, 5.0 m
Yes
25-pin D-shell
1746-HSCE (Differential)
1492-ACABLE9L
0.5, 1.0, 2.5, 5.0 m
Yes
15-pin D-shell
1746-NIO4I, -NIO4V, -FIO4I, -FIO4V
1746-HSCE2 (Differential)
1492-ACABLE9P
0.5, 1.0, 2.5, 5.0 m
Yes
25-pin D-shell
1492-ACABLE9Q
0.5, 1.0, 2.5, 5.0 m
Yes
25-pin D-shell
1746-QS
1492-ACABLE9R
0.5, 1.0, 2.5, 5.0 m
Yes
25-pin D-shell
1746-NO8I, -NO8V
1492-ACAB9A46
0.5, 1.0, 2.5, 5.0 m
Yes
25-pin D-shell
1746-NI16I, -NI16V
9 To order, insert the code for the desired cable length into the cat. no. (005 = 0.5 m, 010 = 1.0 m, 025 = 2.5 m, and 050 = 5.0 m). Example: Cat. No. 1492-
12
ACABLE005A is for a 0.5 m cable that could be used to connect a Cat. No. 1492-AIFM4I-F-5 IFM to a Cat. No. 1746-NI4 I/O module.
13
Visit our website: www.ab.com/catalogs
12-136
Preferred availability cat. nos. are printed in bold
03_1756_Digital.qxd
4/30/2008
9:59 AM
Page 12-137
Bulletin 1492
Programmable Wiring Systems
Product Selection, Continued
Bulletin 1756 ControlLogix IFM/XIM and Cable Selection Table
Digital 8-Point and 16-Point I/O Modules™
!
I/O Module Cat. No. 1756-…
Description of 20-Terminal IFM
Cat. No. for Wiring System
Module with Removable
Terminal Block Socket
Assembly (order plugs
separately)
Cat. No. for Wiring
System Module with
Fixed Terminal Block
Feed-through
1492-IFM20F
1492-RIFM20F³
I I I I I I
O
A A B C N V O A
8 1 1 1 1 1 A 8
D 6 6 6 6 6 8 D
O
A
8
E
O
O
O
B
V
A O 1 O O 1
1 B 6 C N 6
6 8 E 8 8 E
U X
X
X
X
Narrow standard 132V AC/DC Max.
1492-IFM20FN
1492-RIFM20FNa
U X
X
X
X
X U U U X U X U U X
Extra terminals (2 per I/O) 264V AC/DC Max.
1492-IFM20F-2
1492-RIFM20F-2³
U X
X
X
X
X U U U X U X U U X
3-wire sensor type input devices 132V AC/DC
Max.
1492-IFM20F-3
—
— X
X
X
X
X — — — — — — — — —
Standard with 24V AC/DC LEDs
1492-IFM20D24
—
— — X — X
X — — — — — X — — X
1492-IFM20D24N
—
— — X — X
X — — — — — X — — —
Standard with 120V AC/DC LEDs
1492-IFM20D120 ‡
—
U X — — — — — — — — — — — — —
Narrow standard with 120V AC LEDs
1492-IFM20D120N
—
U X — — — — — — — X — — — — —
24V AC/DC LEDs and extra terminals for outputs
1492-IFM20D24-2
—
— — — — — — — — — — — X — — X
24V AC/DC LEDs and extra terminals for inputs
1492-IFM20D24A-2
—
— — X — X
120V AC LEDs and extra terminals for outputs
1492-IFM20D120-2
—
— — — — — — — — — X — — — — —
1492-IFM20D120A-2
—
U X — — — — — — — — — — — — —
Standard 264V AC/DC Max.
1
X U U U X U X U U X
2
LED Indicating
Narrow standard with 24V AC/DC LEDs
120V AC LEDs and extra terminals for inputs
3-wire sensor with 24V AC/DC LEDs
X — — — — — — — — —
1492-IFM20D24-3
—
— — X — X
8 Individually isolated with 24/48V AC/DC LEDs
and 4 terminals/output
1492-IFM20DS24-4
—
— — — — — — — — — — W — W W —
8 Individually isolated with 120V AC LEDs and 4
terminals/output
1492-IFM20DS120-4
—
— — — — — — W V
1492-IFM20D240-2
—
— — — — — — — — — — — — — — —
1492-IFM20D240A-2
—
— — — — — — — — — — — — — — —
240V AC LEDs and extra terminals for outputs
240V AC LEDs and extra terminals for inputs
120V AC/DC with extra terminals for outputs
1492-IFM20F-F-2
Fusible
1492-RIFM20F-F-2³
V — — — — — —
— — — — — — — — — X — X — — X
1492-IFM20F-F24-2
1492-RIFM20F-F24-2³
— — — — — — — — — — — X — — X
Extra terminals with 120V AC/DC blown fuse LED
indicators
1492-IFM20F-F120-2
1492-RIFM20F-F120-2³
— — — — — — — — — X — — — — —
Extra terminals with 240V AC/DC blown fuse LED
indicators
1492-IFM20F-F240-2
—
— — — — — — — — — X — — — — —
Extra terminals with 24V AC/DC blown fuse LED
indicators for inputs
1492-IFM20F-F24A-2
1492-RIFM20F-F24A-2³
— — X — X — — — — — — — — — —
Extra terminals with 120V AC/DC blown fuse LED
indicators for inputs
1492-IFM20F-F120A-2
1492-RIFM20F-F120A-2³ — X — — — — — — — — — — — — —
8 Individually isolated with extra terminals and 24V
AC/DC blown fuse LED indicators
1492-IFM20F-FS-2
—
— — — — — — W V
1492-IFM20F-FS24-2
—
— — — — — — — — — — W — W W —
1492-IFM20F-FS24A-4
—
— — — — — — — — — — — — — — —
8 Individually isolated with extra terminals/output
and 120V AC/DC blown fuse LED indicators
1492-IFM20F-FS120-2
—
— — — — — — W V
V — — — — — —
8 Individually isolated with 4 terminals/output and
120V AC/DC blown fuse LED indicators
1492-IFM20F-FS120-4
—
— — — — — — W V
V — — — — — —
1492-IFM20F-FS120A-4
—
U — — — — — — — — — — — — — —
1492-IFM20F-FS240-4
—
— — — — — — W — — — — — — — —
8 Individually isolated with 4 terminals/output and
240V AC/DC blown fuse LED indicators
5
6
7
8
V — W — W W —
Two 4-point isolated groups with four
terminals/input and 24V AC/DC blown fuse LED
indicators
Two 4-point isolated groups with four
terminals/input and 120V AC/DC blown fuse
indicators
4
X — — — — — — — — —
Extra terminals with 24V AC/DC blown fuse LED
indicators
8 Individually isolated 120V AC/DC with extra
terminals for outputs
3
9
10
11
Relay Master (LED Indicating) §♣
20-pin master with eight (8) 24V DC relays
1492-XIM2024-8R
—
— — — — — — — — — — — X — — —
20-pin master with sixteen (16) 24V DC relays
1492-XIM2024-16R
—
— — — — — — — — — — — X — — —
20-pin master with sixteen (16) 24V DC relays with
fusing
1492-XIM2024-16RF
—
— — — — — — — — — — — X — — —
20-pin master with eight (8) 120V AC relays
1492-XIM20120-8R
—
— — — — — — — — — X — — — — —
20-pin master with sixteen (16) 120V AC relays
1492-XIM20120-16R
—
— — — — — — — — — X — — — — —
20-pin master with sixteen (16) 120V AC relays
with fusing
1492-XIM20120-16RF
—
— — — — — — — — — X — — — — —
Note: Footnotes are on page 12-138.
Visit our website: www.ab.com/catalogs
Preferred availability cat. nos. are printed in bold
12-137
12
13
03_1756_Digital.qxd
4/30/2008
9:59 AM
Page 12-138
Bulletin 1492
Programmable Wiring Systems
Product Selection, Continued
I/O Module Cat. No. 1756-…
Cat. No. for Wiring System
Module with Removable
Cat. No. for Wiring
Terminal Block Socket
System Module with
Assembly (order plugs
Fixed Terminal Block
separately)
Relay Expander (LED Indicating)§♣
!
Description of 20-Terminal IFM
1
I I I I I I
O
A A B C N V O A
8 1 1 1 1 1 A 8
D 6 6 6 6 6 8 D
O
A
8
E
O
O
O
B
V
A O 1 O O 1
1 B 6 C N 6
6 8 E 8 8 E
Expander with 8 24V DC relays
1492-XIM24-8R
1492-RXIM24-8R
— — — — — — — — — — — 9 — — —
Expander with 8 120V AC relays
1492-XIM120-8R
—
— — — — — — — — — 9 — — — — —
8-channel expander with 24V DC blown fuse
indicators
1492-XIMF-F24-2
—
— — — — — — — — — — — 9 — — —
8-channel expander with 120V AC blown fuse
indicators
1492-XIMF-F120-2
—
— — — — — — — — — 9 — — — — —
Expander with eight (8) feed-through channels
132V AC/DC max
1492-XIMF-2
Fusible Expander
2
Feed-through Expander
3
—
— — — — — — — — — 9 — 9 — — —
9 Can have up to one (1) expander module depending upon master used (total 16 outputs or less). An extender cable is provided.
7 Cables are available in standard lengths of 0.5 m, 1.0 m, 2.5 m, and 5.0 m. To order, insert the code for the desired cable length into the catalog number, e.g.,
005 = 0.5 m (010 = 1.0 m, 025 = 2.5 m, and 050 = 5.0 m), and insert the letter in the box. Example: Catalog Number 1492-CABLE050W is for a 5.0 m cable,
and the letter W.
4
‡ This IFM is not recommended for use with PLC I/P modules that have an off-state leakage current exceeding 0.5 mA. Use a 1492-IFM20D120N or 149220D120A-2 for inputs. Use 1492-IFM20D120-2 for outputs.
♣ The LED indicates the PLC output status.
³ Compatible RTB plug 1492-RTB20N (screw style terminal) or 1492-RTB20P. Order plugs separately. 2 plugs per cat. no.
a Compatible RTB plug 1492-RTB10N (screw style terminal) or 1492-RTB10P. Order plugs separately. 2 plugs per cat. no.
5
6
Bulletin 1756 ControlLogix IFMs and Cables, Continued
Bulletin 1756 Digital 16-Point Isolated and 32-Point I/O Modules
9
I/O Module Cat. No. 1756-…
7
Description of 40-Terminal IFM
Cat. No. with Wiring
System Module with
Fixed Terminal Block
Cat. No. for Wiring System
Module with Removable
Terminal Block Socket
Assembly (order plugs
separately)
I I I
I I
A B B I I I H M
1 1 1 A B V 1 1
6 6 6 3 3 3 6 6
I D I 2 2 2 I I
O
A
1
6
I
O
B
8
E
I
O
B
1
6
D
O
B
1
6
I
O
B
1
6
I
S
O
B
3
2
O
O
V O W O
3 H 1 X
2 8 6 8
E I I I
Feed-through
1492-IFM40F
1492-RIFM40F
Y Y Y Z
Z
Z Y — Y Y Y Y Y Z
Z Y Y Y
Extra terminals (2 per I/O) 132V AC/DC
Max.
1492-IFM40F-2
1492-RIFM40F-2
— Y — Z
Z
Z — — — — Y — — Z
Z — — —
3-wire sensor type input devices 60V
AC/DC Max.
1492-IFM40F-3
—
Standard with 24V AC/DC LEDs
1492-IFM40D24
1492-RIFM40D24
24V AC/DC LEDs and extra terminals
for outputs
1492-IFM40D24-2
—
24V AC/DC LEDs and extra terminals
for inputs
1492-IFM40D24A-2
1492-RIFM40D24A-2
120V AC LEDs and extra terminals for
outputs
1492-IFM40D120-2
—
— — — — — — — — — — — — — — — — — —
120V AC LEDs and extra terminals for
inputs
1492-IFM40D120A-2
—
— — — Z — — — — — — — — — — — — — —
Standard 132V AC/DC Max.
8
— — — — Z
Z — — — — — — — — — — — —
— — — — Z
Z — — — — — — — Z
Z — — —
— — — — — — — — — — — — — Z
Z — — —
LED Indicating
9
10
3-wire sensor with 24V AC/DC LEDs
11
12
13
— — — — Z
Z — — — — — — — — — — — —
1492-IFM40D24-3
—
— — — — Z
16 individually isolated with 24/48V
AC/DC LEDs and four terminals/output
1492-IFM40DS24-4
—
— — — — — — — — — Y
16 individually isolated with 24V AC/DC
LEDs and four terminals/input
1492-IFM40DS24A-4
—
— Y Y — — — — — — — — — — — — — — —
16 individually isolated with 120V AC
LEDs and four terminals/output
1492-IFM40DS120-4
—
— — — — — — — — Y — — — — — — — Y Y
16 individually isolated with 120V AC
LEDs and four terminals/input
1492-IFM40DS120A-4
—
Y — — — — — — — — — — — — — — — — —
16 individually isolated with 240V AC
LEDs and four terminals/input
1492-IFM40DS240A-4
—
— — — — — — — Y — — — — — — — — — —
Note: Footnotes are on page 12-140.
Visit our website: www.ab.com/catalogs
12-138
Preferred availability cat. nos. are printed in bold
Z — — — — — — — — — — — —
Y
13
Y Y — — — Y Y
03_1756_Digital.qxd
4/30/2008
10:00 AM
Page 12-139
Bulletin 1492
Programmable Wiring Systems
Product Selection, Continued
I/O Module Cat. No. 1756-…
Description of 40-Terminal IFM
Cat. No. with Wiring
System Module with
Fixed Terminal Block
Cat. No. for Wiring System
Module with Removable
Terminal Block Socket
Assembly (order plugs
separately)
I I I
I I
A B B I I I H M
1 1 1 A B V 1 1
6 6 6 3 3 3 6 6
I D I 2 2 2 I I
O
A
1
6
I
O
B
8
E
I
O
B
1
6
D
O
B
1
6
I
O
B
1
6
I
S
O
B
3
2
O
O
V O W O
3 H 1 X
2 8 6 8
E I I I
Fusible
120V AC/DC with extra terminals for
32-point outputs
1492-IFM40F-F-2
—
— — — — — — — — — — — — — Z
Z — — —
Extra terminals with 24V AC/DC blown
fuse indicators for 32-point outputs
1492-IFM40F-F24-2
1492-RIFM40F-F24-2
— — — — — — — — — — — — — Z
Z — — —
16 individually fused with 24V DC
blown fuse low leakage (0.05 mA) LED
circuit, 2 isolated groups, 2
terminals/output
1492-IFM40F-F24D-2
—
— — — — — — — — — — Y — — — — — — —
Individually fused with 24V DC blown
fuse low leakage (0.05 mA) LED circuit,
4 isolated groups, 4 terminals/input
1492-IFM40F-F24AD-4
—
— Y — — — — — — — — — — — — — — — —
Extra terminals with 120V AC/DC blown
fuse indicators for outputs
1492-IFM40F-F120-2
—
— — — — — — — — — — — — — — — — — —
1492-IFM40F-FS-2
—
— — — — — — — — Y Y Y
12
16 individually isolated with extra
terminals and 24V AC/DC blown fuse
indicators
1492-IFM40F-FS24-2
—
— — — — — — — — — Y 7
12
16 individually isolated with 24V AC/DC
blown fuse indicators and four
terminals/output
1492-IFM40F-FS24-4
—
— — — — — — — — — Y 7
12
1492-IFM40F-FS-4
—
— — — — — — — — Y Y Y
12
16 individually isolated with extra
terminals for 120V AC/DC outputs
16 individually isolated 240V AC/DC
with four terminals/output
Y Y
12
Y Y
12
Y Y
12
Y Y
12
1
2
3
— — Y Y Y
— — — Y Y
4
— — — Y Y
— — — Y Y
16 individually isolated with extra
terminals and 120V AC/DC blown fuse
LED indicators
1492-IFM40F-FS120-2
1492-RIFM40F-FS120-2 — — — — — — — — Y — — — — — — Y Y Y
16 individually isolated with 120V
AC/DC blown fuse indicators and four
terminals/output
1492-IFM40F-FS120-4
1492-RIFM40F-FS120-4™ — — — — — — — — Y — — — — — — — Y Y
16 individually isolated with 240V
AC/DC blown fuse indicators and four
terminals/output
1492-IFM40F-FS240-4
—
— — — — — — — — Y — — — — — — — Y Y
16 individually isolated with 24V AC/DC
blown fuse indicators and four
terminals/input
1492-IFM40F-FS24A-4
—
— ‡
16 individually isolated with 120V
AC/DC with four terminals/input
!
Y — — — — — — — — — — — — — — —
1492-IFM40F-FSA-4
—
Y Y Y — — — Y — — — — — — — — — — —
16 individually isolated with 120V
AC/DC blown fuse indicators and four
terminals/input
1492-IFM40F-FS120A-4
1492-RIFM40F-FS120A4™
Y — — — — — Y — — — — — — — — — — —
16 individually isolated with 240V
AC/DC blown fuse indicators and four
terminals/input
1492-IFM40F-FS240A-4
—
— — — — — — — Y — — — — — — — — — —
5
6
7
8
9
Relay Master (LED Indicating)§♣
40-pin master with eight (8) 24V DC
relays
1492-XIM4024-8R
—
— — — — — — — — — — — — — Z — — — —
40-pin master with sixteen (16) 24V DC
relays
1492-XIM4024-16R
1492-RXIM4024-16R♠
— — — — — — — — — — — — — Z — — — —
40-pin master with sixteen (16) 24V DC
relays with fusing
1492-XIM4024-16RF
—
— — — — — — — — — — — — — Z — — — —
10
Relay Expander (LED Indicating)§♣
Expander with 8 24V DC relays
1492-XIM24-8R
1492-RXIM24-8R11
— — — — — — — — — — — — — ³ — — — —
Expander with 8 120V AC relays
1492-XIM120-8R
—
— — — — — — — — — — — — — — — — — —
Fusible Expander
8-channel expander with 24V DC blown
fuse indicators
1492-XIMF-F24-2
—
— — — — — — — — — — — — — ³ — — — —
8-channel expander with 120V AC
blown fuse indicators
1492-XIMF-F120-2
—
— — — — — — — — — — — — — — — — — —
Expander with (16) 24V DC relays with
fusing
1492-XIM24-16RF
—
— — — — — — — — — — — — — a — — — —
11
12
Note: Footnotes are on page 12-140.
13
Visit our website: www.ab.com/catalogs
Preferred availability cat. nos. are printed in bold
12-139
03_1756_Digital.qxd
4/30/2008
10:00 AM
Page 12-140
Bulletin 1492
Programmable Wiring Systems
Product Selection, Continued
I/O Module Cat. No. 1756-…
!
Description of 40-Terminal IFM
1
Cat. No. with Wiring
System Module with
Fixed Terminal Block
Cat. No. for Wiring System
Module with Removable
Terminal Block Socket
Assembly (order plugs
separately)
I I I
I I
A B B I I I H M
1 1 1 A B V 1 1
6 6 6 3 3 3 6 6
I D I 2 2 2 I I
O
A
1
6
I
O
B
8
E
I
O
B
1
6
D
O
B
1
6
I
O
B
1
6
I
S
O
B
3
2
O
O
V O W O
3 H 1 X
2 8 6 8
E I I I
Feed-through Expander
Expander with 8 feed-through channels
132V AC/DC max
—
1492-XIMF-2
— — — — — — — — — — — — — ³ — — — —
9 Cables are available in standard lengths of 0.5, 1.0, 2.5, and 5.0 m. To order, insert the code for the desired cable length into the catalog number, e.g., 005 =
2
3
0.5 m (010 = 1.0 m, 025 = 2.5 m, and 050 = 5.0 m), and insert the letter in the box. Example: Catalog Number 1492-CABLE050W is for a 5.0 m cable, and
the letter Y.
7 The 1492-IFM40F-FS24-2 and 1492-IFM40F-FS24-4 module and 1492-CABLE7Y cable can be used with the 1756-OB16D module. However, due to the
1492-IFM40F-FS24-2 and 1492-IFM40F-Fs24-4 module's blown fuse leakage current ratings, the "no load" diagnostic function of the 1756-OB16D will not
indicate a blown or removed fuse as a no load condition. If you require this diagnostic to function for a blown or removed fuse, you must use a 1492-IFM40FF24D-2.
‡ The 1492-IFM40F-FS24A-4 module and 1492-CABLE7Y cable can be used with the 1756-IB16D module. However, due to the 1492-IFM40F-FS24A-4
module's blown fuse leakage current rating, the "wire off" diagnostic function of the 1756-IB16D will not indicate a blown or removed fuse as a wire off
condition. If you require this diagnostic to function for a blown or removed fuse, you must use a 1492-IFM40F-F24AD-4.
♣ The LED indicates the PLC output status.
³ Can have up to 2 or 3 expander modules depending upon master used (total 32 outputs or less). An extender cable is provided.
4
a One 1492-XIM24-16RF is to be used with one 1492-XIM4024-16R or 1492-XIM4024-16RF master (32 pt. only).
 Compatible RTB plug; 1492-RTB20N (screw style terminal) or 1492-RTB20P. ORDER PLUGS SEPARATELY. 2 plugs per cat. no.
™ Compatible RTB plug; 1492-RTB17N (screw style terminal) or 1492-RTB17P. ORDER PLUGS SEPARATELY. 2 plugs per cat. no.
♠ Compatible RTB plug; 1492-RTB14N (screw style terminal) or 1492-RTB14P. ORDER PLUGS SEPARATELY. 2 plugs per cat. no.
5
11
Compatible RTB plug; 1492-RTB12N (screw style terminal) or 1492-RTB12P. ORDER PLUGS SEPARATELY. 2 plugs per cat. no.
12
Do not use this module in output sinking mode with fused IFM moduls as the IFM module fuses will not properly protect the circuit.
13
IFMs LED provides PLC output ON/OFF indication. Due to the magnitude of current through the LED, the 1756-0B16D PLC module “No Load” diagnostic
function will not work. If this function is required, use the Cat. No. 1492-IFM40F-2.
6
Bulletin 1756 ControlLogix IFMs and Cables, Continued
7
8
9
These pre-wired cables have a pre-wired RTB on one end to connect to the front of a Bulletin 1756 digital I/O module and a connector on
the other end to plug into a 20- or 40-terminal IFM/XIM. You must first select the IFM/XIM from one of the preceding selection tables.
Pre-Wired Cables for Bulletin 1756 Digital I/O Modules
Cable Cat. No.
Standard Cable
Lengths
Build-to-Order
Available
No. of Conductors
Mating I/O Module Cat. No.
1492-CABLE9U
0.5, 1.0, 2.5, 5.0 m
Yes
20
1756-IA8D, -OA8, -OA8D, -OA8E, -OB8, -OC8, -ON8
1492-CABLE9V
0.5, 1.0, 2.5, 5.0 m
Yes
20
1756-OA8D, -OA8E
1492-CABLE9W
0.5, 1.0, 2.5, 5.0 m
Yes
20
1756-OA8, -OB8, -OC8, -ON8
1492-CABLE9X
0.5, 1.0, 2.5, 5.0 m
Yes
20
1756-IA16, -IB16, -IC16, -IN16, -IV16, -OA16, -OB16E, -OV16E
1492-CABLE9Y
0.5, 1.0, 2.5, 5.0 m
Yes
40
1756-IA16I, -IB16D, -IB16I, -IH16, -IM16I, -OA16I, -OB8EI, -OB16D, OB16I, -OB16IS, -OH8I, -OW16I, -OX8I
1492-CABLE9Z
0.5, 1.0, 2.5, 5.0 m
Yes
40
1756-IB32, -IV32, -IA32, -OB32, -OV32E
9 Cables are available in standard lengths of 0.5 m, 1.0 m, 2.5 m, and 5.0 m. To order, insert the code for the desired cable length into the cat. no. (005 = 0.5 m,
10
010 = 1.0 m, 025 = 2.5 m, and 050 = 5.0 m). Example: Cat. No. 1492-CABLE005Y is for a 0.5 m cable that could be used to connect a Cat. No. 1492-IFM40F
IFM to a Cat. No. 1756-IA16I I/O module.
The I/O module-ready cables have a pre-wired RTB on one end to plug onto the front of a Bulletin 1756 I/O module and 20 or 40
individually colored #18 AWG conductors on the other end. These cables provide the convenience of pre-wired connections at the I/O
module end, while still allowing the flexibility to fieldwire to standard terminal blocks of your choice.
11
12
13
I/O Module-Ready Cables for Bulletin 1756 Digital I/O Modules ‡
Cable Cat. No.
Standard Cable
Lengths
Build-to-Order
Available
No. of Conductors
Mating I/O Module Cat. No.
7TBNH
1492-CABLE7
1.0, 2.5, 5.0 m
Yes
20
1756-IA8D, -IA16, -IB16, -IC16, -IN16, -IV16, -OA8, -OA8D, -OA8E, OA16, -OB8, -OB16E, -OC8, -ON8, -OV16E
7TBCH
1492-CABLE7
1.0, 2.5, 5.0 m
Yes
40
1756-IA16I, -IA32, -IB16D, -IB16I, -IB32, -IV32, -IH16I, -IM16I, -OA16I,
-OB8EI, -OB16D, -OB16IS, -OB16I, -OB32, -OV32E, -OH8I, -OW16I, OX8I
7 Cables are available in standard lengths of 1.0 m, 2.5 m, and 5.0 m. To order, insert the code for the desired cable length into the cat. no. (010 = 1.0 m, 025 =
2.5 m, and 050 = 5.0 m). Example: Cat. No. 1492-CABLE050TBNH is for a 5.0 m cable with a pre-wired Cat. No. 1756-TBNH RTB on one end.
‡ Discrete I/O read cables should not be used with PLC analog I/O modules as cable shield and drain wires are not provided.
Visit our website: www.ab.com/catalogs
12-140
Preferred availability cat. nos. are printed in bold
04_1756_Analog_a.qxd
4/30/2008
10:01 AM
Page 12-141
Bulletin 1492
Programmable Wiring Systems
Product Selection, Continued
Bulletin 1756 ControlLogix AIFM and Cable Selection Table
Analog I/O Module97
!
IF8 (Diff Current)
IF8H (Voltage)
IF8H (Current/Hart)
IF16 (Sgl-End Volt)
IF16 (Sgl-End Current)
IF16 (Diff Voltage)
IF16 (Diff current)
IR6I
IT6I
IT6I2
OF4 (Voltage)
OF4 (Current)
OF6CI
OF6VI
OF8 (Voltage)
OF8 (Current)
OF8H (Voltage)
OF8H (Current/Hart)
PIM
IF8 (Diff Voltage)
IF8 (Sgl-End Current)
IF8 (Sgl-End Volt)
IF6CIS (Current)
IF6I (Voltage)
IF6I (Current)
IF4FXOF2F (Cur In & Volt Out)
IF4FXOF2F (Volt In & Out)
IF4FXOF2F (Cur In & Out)
HSC (5V Diff.)
Description
of
AIFM
Cat. No. for
Wiring System
Module with
Fixed Terminal
Block
Cat. No. for
Wiring Sytems
Module with
Removable
Terminal Block
Socket
Assembly (order
plugs
separately)
HSC (24V Diff.)
I/O Module Cat. No. 1756-…
—
—
—
—
—
—
—
—
—
—
VA
VB
—
—
—
—
—
—
—
1
Feed-through
4-channel
input, output
or 2-in/2-out
combination
with 3 terminals/channel
1492-AIFM4-3
6-channel
isolated with
3…4 terminals/channel
1492-AIFM6S-3
1492-RAIFM6S-3§ —
—
ZA
ZB ZC
X
Y
Z
—
—
—
—
—
Z
—
—
—
—
Y
Y
—
—
—
8-channel differential
16-channel
single-ended
with 3 terminals/channel
1492-AIFM8-3
1492-RAIFM8-3♣
—
—
—
—
—
—
TA
TB
TC
TD UC UD UA UB UC UD
—
—
—
—
—
—
—
WA WB WA WB
—
—
1492-RAIFM4-3‡
—
—
—
—
—
—
—
—
—
—
—
2
3
—
—
—
—
—
—
—
—
—
4
Thermocouple
6-channel with
3
1492-AIFM6TC-3
terminals/chan
nel
—
—
—
—
—
—
—
—
—
—
—
—
—
5
—
—
—
—
—
—
Y
YT
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
7
—
8
High-Speed Counter/Encoder
2-channel
counter
input/4
outputs
1492-AIFMCE4
—
XA
XB
—
—
—
—
—
—
—
—
—
—
—
6
Fusible High-Speed Counter/Encoder
2-channel
fused counter
input/4 fused
outputs
1492-AIFMCE4-F
—
XA
XB
—
—
—
—
—
—
—
—
—
—
—
Fusible Analog
8-channel with
24V DC blown
fuse indicators, 5
terminals/chan
nel
1492-AIFM8-F-5
—
—
—
ZA
ZB ZC
—
—
—
TA
TB
TC
TD UC UD
—
UC UD
—
—
—
—
—
—
—
—
—
—
—
—
16-channel
input with 24V
DC blown fuse
1492-AIFM16-F-3
indicators, 3
terminals/chan
nel
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
UA UB UC UD
—
—
—
—
—
—
—
—
—
—
—
—
16-channel
input with 24V
DC blown fuse
1492-AIFM16-F-5
inidcators, 5
terminals/chan
nel
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
UA UB UC UD
—
—
—
—
—
—
—
—
—
—
—
—
8 input/2
output
channels
—
1492-AIFMPI
9
10
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
M
9 Some analog I/O modules can be operated in up to four modes (current/voltage, single-ended/differential) based on connections. In all cases, each channel is
factory-configured for the same mode. However, you can field configure any channel for another mode. You may need to alter the terminal block wiring to
match the application. Refer to the PLC I/O Module Installation Manual.
7 Cables are available in standard length of 0.5, 1.0, and 5.0 m. To order, insert the code for the desired cable length into the catalog number 005 = 0.5 m (010 =
1.0 m, 025 = 2.5 m, and 050 = 5.0 m), and insert the letter in the box. Example: Cat. No. 1402-ACABLE025TB is for a 2.5 m cable, and the letters TB.
‡ Compatible RTB plug 1492-RTB8N (screw style terminal) or 1492-RTB8P. Order plugs separately. 2 plugs per cat. no.
§ Compatible RTB plug 1492-RTB12N (screw style terminal) or 1492-RTB12P. Order plugs separately. 2 plugs per cat. no.
♣ Compatible RTB plug 1492-RTB16N (screw style terminal) or 1492-RTB16P. Order plugs separately. 2 plugs per cat. no.
11
12
13
Visit our website: www.ab.com/catalogs
Preferred availability cat. nos. are printed in bold
12-141
04_1756_Analog_a.qxd
4/30/2008
10:01 AM
Page 12-142
Bulletin 1492
Programmable Wiring Systems
Product Selection, Continued
Bulletin 1756 ControlLogix AIFMs and Cables, Continued
These pre-wired cables have a pre-wired RTB on one end to connect to the front of a Bulletin 1756 analog I/O module and a D-shell
connector on the other end to plug into a 20- or 40-terminal AIFM. You must first select the AIFM from the preceding selection table.
!
1
2
3
4
5
Cat. No.
Standard Cable Lengths
Build-to-Order Available
AIFM Connector
1492-ACABLE9M
0.5, 1.0, 2.5, 5.0 m
Yes
25-pin D-shell
Mating I/O Module Cat. No.
1757-PIM
1492-ACABLE9X
0.5, 1.0, 2.5, 5.0 m
Yes
25-pin D-shell
1756-IF16 Current
1756-IF16 Voltage, -IT6I, -OF6CI, -OF6VI
1492-ACABLE9Y
0.5, 1.0, 2.5, 5.0 m
Yes
25-pin D-shell
1492-ACABLE9YT
0.5, 1.0, 2.5, 5.0 m
Yes
25-pin D-shell
1756-IT6I2
1492-ACABLE9Z
0.5, 1.0, 2.5, 5.0 m
Yes
25-pin D-shell
1756-IR16, -IF6CIS
1492-ACABLE9TA
0.5, 1.0, 2.5, 5.0 m
Yes
25-pin D-shell
1756-IF8 Single-Ended Voltage
1492-ACABLE9TB
0.5, 1.0, 2.5, 5.0 m
Yes
25-pin D-shell
1756-IF8 Single-Ended Current
1492-ACABLE9TC
0.5, 1.0, 2.5, 5.0 m
Yes
25-pin D-shell
1756-IF8 Differential Voltage
1492-ACABLE9TD
0.5, 1.0, 2.5, 5.0 m
Yes
25-pin D-shell
1756-IF8 Differential Current
1492-ACABLE9UA
0.5, 1.0, 2.5, 5.0 m
Yes
25-pin D-shell
1756-IF16 Single-Ended Voltage
1492-ACABLE9UB
0.5, 1.0, 2.5, 5.0 m
Yes
25-pin D-shell
1756-IF16 Single-Ended Current
1492-ACABLE9UC
0.5, 1.0, 2.5, 5.0 m
Yes
25-pin D-shell
1756-IF16 Differential Voltage
1492-ACABLE9UD
0.5, 1.0, 2.5, 5.0 m
Yes
25-pin D-shell
1756-IF16 Differential Current
1492-ACABLE9VA
0.5, 1.0, 2.5, 5.0 m
Yes
15-pin D-shell
1756-OF4 Voltage
1492-ACABLE9VB
0.5, 1.0, 2.5, 5.0 m
Yes
15-pin D-shell
1756-OF4 Current
1492-ACABLE9WA
0.5, 1.0, 2.5, 5.0 m
Yes
25-pin D-shell
1756-OF8 Voltage
1492-ACABLE9WB
0.5, 1.0, 2.5, 5.0 m
Yes
25-pin D-shell
1756-OF8 Current
1492-ACABLE9XA
0.5, 1.0, 2.5, 5.0 m
Yes
25-pin D-shell
1756-HSC (24V DC Diff.)
1492-ACABLE9XB
0.5, 1.0, 2.5, 5.0 m
Yes
25-pin D-shell
1756-HSC (5V DC Diff.)
1492-ACABLE9ZA
0.5, 1.0, 2.5, 5.0 m
Yes
25-pin D-shell
1756-IF4FXOF2F (Cur In & Out)
1492-ACABLE9ZB
0.5, 1.0, 2.5, 5.0 m
Yes
25-pin D-shell
1756-IF4FXOF2F (Volt In & Out)
1492-ACABLE9ZC
0.5, 1.0, 2.5, 5.0 m
Yes
25-pin D-shell
1756-IF4FXOF2F (Cur In & Volt Out)
9 Cables are available in standard lengths of 0.5, 1.0, 2.5, and 5.0 m. To order, insert the code for the desired cable length into the cat. no. (005 = 0.5 m, 010 =
1.0 m, 025 = 2.5 m, and 050 = 5.0 m). Example: Cat. No. 1492-ACABLE005Y is for a 0.5 m cable that could be used to connect a Cat. No. 1492-AIFM6TC-3
analog IFM to a Cat. No. 1756-IT6I I/O module.
6
7
8
9
10
11
12
13
Visit our website: www.ab.com/catalogs
12-142
Preferred availability cat. nos. are printed in bold
05_1762_1764.qxd
4/30/2008
10:04 AM
Page 12-143
Bulletin 1492
Programmable Wiring Systems
Product Selection, Continued
MicroLogix 1200 Embedded 40 I/O Controllers to IFM and Cable Selection Tables
Bulletin 1762-L40x Compatible 40-Terminal 1492-IFMs
Description of 40-Pin IFM
Cat. No. for Wiring
System Module with
Fixed Terminal
Block
Cat. No. for Wiring System
Module with Removable
Terminal Block Socket
Assembly (order plugs
seperately)
1492-IFM40F9
1492-RIFM40F97
1492-IFM40F-29
1492-RIFM40F-297
!
1762 Embedded I/O
-L40AWA
Inputs
-L40BWA
Inputs
-L40BXB
Inputs
-L40AWA
Outputs
-L40BWA
Outputs
-L40BXB
Outputs
A62
A62
A62
B62
B62
B62
A62
A62
A62
B62
B62
B62
Feed-through
Standard 132V AC/DC Max.
Extra terminals (2 per I/O)
132V AC/DC Max.
9 When using this IFM module with the base I/O of the 1762 controller, the current rating of the outputs must be considered. Refer to Publication 1492-TD008
for details.
7 Compatible RTB plug; 1492-RTB20N (screw style terminal) or 1492-RTB20P. ORDER PLUGS SEPARATELY. 2 plugs per cat. no.
1
2
Pre-Wired Cables for 1762-L40x Embedded I/O
Cable Cat. No.
Standard Cable Lengths
Build-to-Order Available
No. of Conductors
Mating 1762 Controller I/O Cat. No.
1492-CAB9A62
0.5, 1.0, 2.5, 5.0 m
Yes
40
1762-L40AWA Inputs, -L40BWA Inputs, -L40BXB Inputs
1492-CAB9B62
0.5, 1.0, 2.5, 5.0 m
Yes
40‡
1762-L40AWA Outputs, -L40BWA Outputs, -L40BXB Outputs
3
9 Pre-wired cables are available in standard lengths of 0.5, 1.0, 2.5, and 5.0 m. To order, insert the code for the desired cable length into the cat. no.
(005 = 0.5 m, 010 = 1.0 m, 025 = 2.5 m, and 050 = 5.0 m). Example: Cat. No. 1492-CAB005A62 is for a 0.5 m cable that could be used to connect a catalog
number 1492-IFM40F to a catalog number 1762-L40AWA Input.
4
I/O Ready Cables for 1762 Base I/O
Cable Cat. No.
Standard Cable Lengths
Build-to-Order Available
No. of Conductors‡
Mating 1762 Controller I/O Cable Cat. No.
1492-CAB7T62
1.0, 2.5, 5.0 m
Yes
25
1762 -L40AWA Outputs, -L40BWA Outputs, -L40BXB Outputs
1492-CAB7X62
1.0, 2.5, 5.0 m
Yes
40
1762-L40AWA Inputs, -L40BWA Inputs, -L40BXB Inputs
7 I/O ready cables are available in standard lengths of 1.0, 2.5, and 5.0 m. To order, insert the code for the desired cable length into the cat. no. (010 = 1.0 m,
025 = 2.5 m, and 050 = 5.0 m). Example: Cat. No. 1492-CAB010T62 is for a 1.0 m cable that could be used to connect a catalog number 1492-IFM40F to a
catalog number 1762-L40AWA Input.
5
MicroLogix 1500 Base Unit I/O to IFM and Cable Selection Tables
Bulletin 1764, Base Units I/O and Compatible 20-Pin 1492-IFMs
Description of 20-Pin IFM
Standard 264V AC/DC Max.
1764 Base I/O
Cat. No. for Wiring System
Cat. No. for Wiring System Module with
Module with Fixed Terminal Removable Terminal Block Socket Assembly AWA BWA BXB
AWA
BWA
BXB
Block
(order plugs separately)
Inputs Inputs Inputs Outputs Outputs Outputs
Feed-through
A64
A64
B64
C64
C64
F64
1492-IFM20F9
1492-RIFM20F97
Narrow standard 132V
AC/DC Max.
1492-IFM20FN9
1492-RIFM20FN9‡
A64
A64
B64
C64
C64
F64
Extra terminals (2 per I/O)
264V AC/DC Max.
1492-IFM20F-29
1492-RIFM20F-297
A64
A64
B64
C64
C64
F64
9 When using this IFM module with the base I/O of the 1764 controller, the current rating of the outputs must be considered. Refer to Publication 1492-TD008 for
details.
7 Compatible RTB plug 1492-RTB20N (screw style terminal) or 1492-RTB20P. Order plugs separately. 2 plugs per cat. no.
6
7
8
‡ Compatible RTB plug 1492-RTB10N (screw style terminal) or 1492-RTB10P. Order plugs separately. 2 plugs per cat. no.
Pre-Wired Cables for 1764 Base I/O
Pre-wired cables have a pre-wired RTB on one end to plug into bulletin 1764 base and a 20-pin female connector on the other end to plug
into a 20-terminal IFM/XIM.
Cable Cat. No.
Standard Cable Lengths
Build-to-Order Available
No. of Conductors
Mating 1764 Base I/O Cat. No.
AWA Inputs, BWA Inputs
1492-CAB9A64
0.5, 1.0, 2.5, 5.0 m
Yes
20
1492-CAB9B64
0.5, 1.0, 2.5, 5.0 m
Yes
20
BXB Inputs
1492-CAB9C64
0.5, 1.0, 2.5, 5.0 m
Yes
20
AWA Outputs, BWA Outputs
1492-CAB9F64
0.5, 1.0, 2.5, 5.0 m
Yes
20
BXB Outputs
9
10
9 Pre-wired cables are available in standard lengths of 0.5, 1.0, 2.5, and 5.0 m. To order, insert the code for the desired cable length into the cat. no. (005 =
0.5 m, 010 = 1.0 m, 025 = 2.5 m, and 050 = 5.0 m). Example: Cat. No. 1492-CAB005A64 is for a 0.5 m cable that could be used to connect a catalog number
1492-IFM20F to a catalog number 1764-AWA Input.
I/O Ready Cables for 1764 Base I/O
I/O ready cables have a pre-wired RTB on one end to plug into the 1764 base and 20 individually colored conductors on the other end.
Cable Cat. No.
Standard Cable Lengths
Build-to-Order Available
No. of Conductors
Mating 1764 Base I/O Cat. No.
7T64
1492-CAB7
1.0, 2.5, 5.0 m
Yes
20‡
AWA Outputs, BWA Outputs
1492-CAB7U64
1.0, 2.5, 5.0 m
Yes
20‡
BXB Outputs
1492-CAB7W64
1.0, 2.5, 5.0 m
Yes
20§
AWA Inputs, BWA Inputs
7X64
1492-CAB7
1.0, 2.5, 5.0 m
Yes
20§
BXB Inputs
7 I/O ready cables are available in standard lengths of 1.0, 2.5, and 5.0 m. To order, insert the code for the desired cable length into the cat. no. (010 = 1.0 m,
025 = 2.5 m, and 050 = 5.0 m). Example: Cat. No. 1492-CAB050T64 is for a 1.0 m cable that could be used to connect a catalog number 1492-IFM20F to a
catalog number 1762-AWA Input.
‡ Uses #18 AWG wire.
§ Uses #22 AWG wire.
Visit our website: www.ab.com/catalogs
Preferred availability cat. nos. are printed in bold
12-143
11
12
13
07_1769_Digital.qxd
4/30/2008
10:13 AM
Page 12-144
Bulletin 1492
Programmable Wiring Systems
Product Selection, Continued
!
1
Bulletin 1769 Compact I/O for CompactLogix and MicroLogix 1500 Controller IFM/XIMs and Cables Selection Table
Digital 8 and 16-Point I/O Modules ‡
I/O Module Cat. No. 1769-…
Cat. No. for Wiring
System Module with
Fixed Terminal Block
Cat. No. for Wiring System
Module with Removable
Terminal Block Socket
Assembly (order plugs
separately)
1492-IFM20F
1492-RIFM20Fa
Narrow standard 132V AC/DC
Max.
1492-IFM20FN
1492-RIFM20FN
Extra terminals (2 per I/O)
264V AC/DC Max.
1492-IFM20F-2
1492-RIFM20F-2a
3-wire sensor type input
devices 132V AC/DC Max.
1492-IFM20F-3
⎯
Description of 20-Pin IFM
Standard 264V AC/DC Max.
2
I
A
8
I
I
A
1
6
I
Q
1
6
I
Q
1
6
F
I
M
1
2
O
A
8
O
A
1
6
O
B
8
O
B
1
6
O
V
1
6
O
W
8
O
W
8
I
O
W
1
6
Feed-through
F69 A69 B69 B69 G69 C69 M69 L69 E69 E69 C69 D69 M69
C69 M69 L69 E69 E69 C69
⎯
M69
⎯
A69 B69 B69 G69 C69 M69 L69 E69 E69 C69
⎯
M69
⎯
A69 B69 B69
⎯
⎯
⎯
⎯
⎯
M69
F69 A69 B69 B69
—
⎯
⎯
⎯
⎯
⎯
⎯
LED Indicating
3
4
5
6
7
8
9
10
11
Standard with 24V AC/DC
LEDs
1492-IFM20D24
⎯
⎯
⎯
B69 B69
⎯
⎯
⎯
⎯
E69 E69
Narrow standard with 24V
AC/DC LEDs
1492-IFM20D24N
⎯
⎯
⎯
B69 B69
⎯
⎯
⎯
⎯
E69
⎯
⎯
⎯
H69
Standard with 120V AC/DC
LEDs
1492-IFM20D120§
⎯
⎯
A69
⎯
⎯
⎯
⎯
M69
⎯
⎯
⎯
⎯
⎯
M69
Narrow standard with 120V
AC LEDs
1492-IFM20D120N
⎯
⎯
A69
⎯
⎯
⎯
⎯
H69
⎯
⎯
⎯
⎯
⎯
H69
24V AC/DC LEDs and extra
terminals for outputs
1492-IFM20D24-2
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
M69
24V AC/DC LEDs and extra
terminals for inputs
1492-IFM20D24A-2
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
120V AC LEDs and extra
terminals for outputs
1492-IFM20D120-2
⎯
⎯
⎯
⎯
⎯
⎯
⎯
M69
⎯
⎯
⎯
⎯
⎯
M69
120V AC LEDs and extra
terminals for inputs
1492-IFM20D120A-2
⎯
⎯
A69
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
1492-IFM20D24-3
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
8 Individually isolated with
24/48V AC/DC LEDs and 4
terminals/output
1492-IFM20DS24-4
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
C69 D69
⎯
8 Individually isolated with
120V AC LEDs and 4
terminals/output
1492-IFM20DS120-4
⎯
⎯
⎯
⎯
⎯
⎯
C69
⎯
⎯
⎯
⎯
C69 D69
⎯
240V AC LEDs and extra
terminals for outputs
1492-IFM20D240-2
⎯
⎯
⎯
⎯
⎯
⎯
⎯
M69
⎯
⎯
⎯
⎯
⎯
M69
240V AC LEDs and extra
terminals for inputs
1492-IFM20D240A-2
⎯
⎯
⎯
⎯
⎯
G69
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
120V AC/DC with extra
terminals for outputs
1492-IFM20F-F-2
1492-RIFM20F-F-2a
⎯
⎯
⎯
⎯
⎯
⎯
M69
⎯
E69 E69
⎯
⎯
M69
Extra terminals with 24V
AC/DC blown fuse LED
indicators
1492-IFM20F-F24-2
1492-RIFM20F-F24-2a
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
E69 E69
⎯
⎯
M69
Extra terminals with 120V
AC/DC blown fuse LED
indicators
1492-IFM20F-F120-2
1492-RIFM20F-F120-2a
⎯
⎯
⎯
⎯
⎯
⎯
M69
⎯
⎯
⎯
⎯
⎯
M69
Extra terminals with 240V
AC/DC blown fuse LED
indicators
1492-IFM20F-F240-2
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
Extra terminals with 24V
AC/DC blown fuse LED
indicators for inputs
1492-IFM20F-F24A-2
1492-RIFM20F-F24A-2a
⎯
⎯
⎯
⎯
⎯
⎯
⎯
E69
⎯
⎯
⎯
Extra terminals with 120V
AC/DC blown fuse LED
indicators for inputs
1492-IFM20F-F120A-2
1492-RIFM20F-F120A-2a
⎯
⎯
⎯
⎯
1492-IFM20F-FS-2
⎯
1492-IFM20F-FS24-2
⎯
3-wire sensor with 24V AC/DC
LEDs
13
B69 B69
Fusible
8 Individually isolated 120V
AC/DC with extra terminals for
outputs
12
B69 B69
E69 E69
8 Individually isolated with
extra terminals and 24V
AC/DC blown fuse LED
indicators
B69 B69
9
9
A69
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
C69
⎯
⎯
⎯
⎯
C69 D69
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
C69 D69
⎯
Note: Footnotes are on page 12-145.
Visit our website: www.ab.com/catalogs
12-144
Preferred availability cat. nos. are printed in bold
07_1769_Digital.qxd
4/30/2008
10:14 AM
Page 12-145
Bulletin 1492
Programmable Wiring Systems
Product Selection, Continued
I/O Module Cat. No. 1769-…
Description of 20-Pin IFM
Cat. No. for Wiring
System Module with
Fixed Terminal Block
Cat. No. for Wiring System
Module with Removable
Terminal Block Socket
Assembly (order plugs
separately)
I
A
8
I
I
A
1
6
I
Q
1
6
I
Q
1
6
F
I
M
1
2
O
A
8
O
A
1
6
O
B
8
O
B
1
6
O
V
1
6
O
W
8
O
W
8
I
O
W
1
6
⎯
⎯
⎯
!
Fusible
Two 4-point isolated groups
with four terminals/input and
24V AC/DC blown fuse LED
indicators
1492-IFM20F-FS24A-4
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
8 Individually isolated with extra
terminals/output and 120V
1492-IFM20F-FS120-2
AC/DC blown fuse LED
indicators
⎯
⎯
⎯
⎯
⎯
⎯
C69
⎯
⎯
⎯
⎯
C69 D69
⎯
8 Individually isolated with 4
terminals/output and 120V
AC/DC blown fuse LED
indicators
1492-IFM20F-FS120-4
⎯
⎯
⎯
⎯
⎯
⎯
C69
⎯
⎯
⎯
⎯
C69 D69
⎯
Two 4-point isolated groups
with four terminals/input and
120V AC/DC blown fuse
indicators
1492-IFM20F-FS120A4
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
8 Individually isolated with 4
terminals/output and 240V
AC/DC blown fuse LED
indicators
1492-IFM20F-FS240-4
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
D69
⎯
1
2
3
4
Relay Master (LED Indicating)♣³
20-pin master with eight
24V DC relays
1492-XIM2024-8R
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
E69
⎯
⎯
⎯
⎯
20-pin master with eight
120V AC relays
1492-XIM20120-8R
⎯
⎯
⎯
⎯
⎯
⎯
⎯
H69
⎯
⎯
⎯
⎯
⎯
⎯
20-pin master with sixteen
24V DC relays
1492-XIM2024-16R
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
E69
⎯
⎯
⎯
⎯
20-pin master with sixteen
24V DC relays with fusing
1492-XIM2024-16RF
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
E69
⎯
⎯
⎯
⎯
20-pin master with sixteen
120V AC relays
1492-XIM20120-16R
⎯
⎯
⎯
⎯
⎯
⎯
⎯
H69
⎯
⎯
⎯
⎯
⎯
⎯
20-pin master with sixteen
120V AC relays with fusing
1492-XIM20120-16RF
⎯
⎯
⎯
⎯
⎯
⎯
⎯
H69
⎯
⎯
⎯
⎯
⎯
⎯
1492-XIM24-8R
1492-RXIM24-8R
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
7
⎯
⎯
⎯
⎯
Expander with eight 120V AC
relays
1492-XIM120-8R
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
Fusible Expander
8-channel expander with
24V DC blown fuse indicators
1492-XIMF-F24-2
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
7
⎯
⎯
⎯
⎯
8-channel expander with
120V AC blown fuse indicators
1492-XIMF-F120-2
⎯
⎯
⎯
⎯
⎯
⎯
⎯
7
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
⎯
7
7
7
⎯
⎯
⎯
⎯
Feed-through Expander
1492-XIMF-2
⎯
⎯
6
7
Relay Expander (LED Indicating)♣³
Expander with eight 24V DC
relays
Expander with eight feedthrough channels 132V AC/DC
max
5
8
9
9 In the input module's sink mode only.
7 One expander module is connected to a master to provide a total of 16 outputs. An extender cable is included with each expander to connect it to the master.
10
‡ Cables are available in standard length of 0.5, 1.0, 2.5, and 5.0 m. To order, insert the code for the desired cable length into the catalog number 005 = 0.5 m
(010 = 1.0 m, 025 = 2.5 m, and 050 = 5.0 m), and insert the letter in the box. Example: Cat. No. 1402-CALBE050A is for a 5.0 m cable, and the letter A.
§ This IFM is not recommended for use the PLC I/O modules that have an off-state leadkage current exceeding 0.5 mA. Use a 1492-IFM20D120N or 1492IFM20D120A-2 for inputs. Use 1492-IFM20D120-2 for outputs.
³ The LED indicates the PLC output status.
11
a Compatible RTB plug 1492-RTB20N (screw style terminal) or 1492-RTB20P. Order plugs separately. 2 plugs per cat. no.
 Compatible RTB plug 1492-RTB10N (screw style terminal) or 1492-RTB10P. Order plugs separately. 2 plugs per cat. no.
12
13
Visit our website: www.ab.com/catalogs
Preferred availability cat. nos. are printed in bold
12-145
07_1769_Digital.qxd
4/30/2008
10:14 AM
Page 12-146
Bulletin 1492
Programmable Wiring Systems
Product Selection, Continued
!
Bulletin 1769 Selection Tables, Continued
Bulletin 1769 Digital 32-Point I/O Modules
9
I/O Module Cat. No. 1769…
1
Cat. No. for Wiring
System Module with
Fixed Terminal Block
Description of 40-Pin IFM
Cat. No. for Wiring System
Module with Removable
Terminal Block Socket
Assembly (order plugs
separately)
I
Q
3
2
I
Q
3
2
T
O
B
3
2
O
B
3
2
T
O
V
3
2
T
H
Feed-through
1492-IFM40F
1492-RIFM40F³
J69
H
K69
H
Extra terminals (2 per I/O) 132V AC/DC Max.
1492-IFM40F-2
1492-RIFM40F-2³
J69
H
K69
H
H
3-wire sensor type input devices 60V AC/DC Max.
1492-IFM40F-3
—
J69
H
—
—
—
Standard 132V AC/DC Max.
2
LED Indicating
1492-IFM40D24
1492-RIFM40D24³
J69
H
K69
H
H
24V AC/DC LEDs and extra terminals for outputs
1492-IFM40D24-2
—
—
—
K69
H
H
24V AC/DC LEDs and extra terminals for inputs
1492-IFM40D24A-2
1492-RIFM40D24A-2³
J69
H
—
—
—
120V AC LEDs and extra terminals for outputs
1492-IFM40D120-2
—
—
—
—
—
—
1492-IFM40D120A-2
—
—
—
—
—
—
1492-IFM40D24-3
—
J69
H
—
—
—
16 individually isolated with 24/48V AC/DC LEDs and four terminals/output
1492-IFM40DS24-4
—
—
—
—
—
—
16 individually isolated with 24V AC/DC LEDs and four terminals/input
1492-IFM40DS24A-4
—
—
—
—
—
—
16 individually isolated with 120V AC LEDs and four terminals/output
1492-IFM40DS120-4
—
—
—
—
—
—
16 individually isolated with 120V AC LEDs and four terminals/input
1492-IFM40DS120A-4
—
—
—
—
—
—
16 individually isolated with 240V AC LEDs and four terminals/input
1492-IFM40DS240A-4
—
—
—
—
—
—
H
Standard with 24V AC/DC LEDs
3
120V AC LEDs and extra terminals for inputs
3-wire sensor with 24V AC/DC LEDs
4
5
Fusible
1492-IFM40F-F-2
—
—
—
K69
H
1492-IFM40F-F24-2
1492-RIFM40F-F24-2³
—
—
K69
H
H
Extra terminals with 120V AC/DC blown fuse indicators for outputs
1492-IFM40F-F120-2
—
—
—
—
—
—
16 individually isolated with extra terminals for 120V AC/DC outputs
120V AC/DC with extra terminals for 32-point outputs
Extra terminals with 24V AC/DC blown fuse indicators for 32-point outputs
6
7
8
1492-IFM40F-FS-2
—
—
—
—
—
—
16 individually isolated with extra terminals and 24V AC/DC blown fuse
indicators
1492-IFM40F-FS24-2
—
—
—
—
—
—
16 individually isolated with 24V AC/DC blown fuse indicators and four
terminals/output
1492-IFM40F-FS24-4
—
—
—
—
—
—
16 individually isolated 240V AC/DC with four terminals/output
1492-IFM40F-FS-4
—
—
—
—
—
—
16 individually isolated with extra terminals and 120V AC/DC blown fuse
LED indicators
1492-IFM40F-FS120-2
1492-RIFM40F-FS120-2³
—
—
—
—
—
16 individually isolated with 120V AC/DC blown fuse indicators and four
terminals/output
1492-IFM40F-FS120-4
1492-RIFM40F-FS120-4a
—
—
—
—
—
16 individually isolated with 240V AC/DC blown fuse indicators and four
terminals/output
1492-IFM40F-FS240-4
—
—
—
—
—
—
16 individually isolated with 24V AC/DC blown fuse indicators and four
terminals/input
1492-IFM40F-FS24A-4
—
—
—
—
—
—
1492-IFM40F-FSA-4
—
—
—
—
—
—
1492-IFM40F-FS120A-4
1492-RIFM40F-FS120A-4a
—
—
—
—
—
—
—
—
—
—
—
—
16 individually isolated with 120V AC/DC with four terminals/input
9
16 individually isolated with 120V AC/DC blown fuse indicators and four
terminals/input
16 individually isolated with 240V AC/DC blown fuse indicators and four
1492-IFM40F-FS240A-4
terminals/input
Relay Master (LED Indicating)§♣
10
40-pin master with eight 24V DC relays
1492-XIM4024-8R
—
—
—
K69
H
40-pin master with sixteen 24V DC relays
1492-XIM4024-16R
1492-RXIM4024-16R
—
—
K69
H
—
40-pin master with sixteen 24V DC relays with fusing
1492-XIM4024-16RF
—
—
—
K69
H
—
Relay Expander (LED Indicating)§♣
11
Expander with eight 24V DC relays
1492-XIM24-8R
1492-RXIM24-8R™
—
—
7
7
—
Expander with eight 120V AC relays
1492-XIM120-8R
—
—
—
—
—
—
—
Fusible Expander
12
8-channel expander with 24V DC blown fuse indicators
1492-XIMF-F24-2
—
—
—
7
7
8-channel expander with 120V AC blown fuse indicators
1492-XIMF-F120-2
—
—
—
—
—
—
Expander with sixteen 24V DC relays with fusing
1492-XIM24-16RF
—
—
—
‡
‡
—
Note: Footnotes are on page 12-147.
13
Visit our website: www.ab.com/catalogs
12-146
Preferred availability cat. nos. are printed in bold
07_1769_Digital.qxd
4/30/2008
10:14 AM
Page 12-147
Bulletin 1492
Programmable Wiring Systems
Product Selection, Continued
I/O Module
Cat. No. 1769-…
Cat. No. for Wiring
System Module with
Fixed Terminal Block
Description of 40-Pin IFM
Cat. No. for Wiring System
Module with Removable
Terminal Block Socket
Assembly (order plugs
separately)
I
Q
3
2
I
Q
3
2
T
O
B
3
2
O
B
3
2
T
O
V
3
2
T
—
—
—
7
7
—
Feed-through Expander
Expander with eight (8) feed-through channels 132V AC/DC max
1492-XIMF-2
!
1
9 Cables are available in standard lengths of 0.5, 1.0, 2.5, and 5.0 m. To order, insert the code for the desired cable length into the catalog number, e.g., 005 =
0.5 m (010 = 1.0 m, 025 = 2.5 m, and 050 = 5.0 m), and insert the letter in the box. Example: Cat. No. 1492-CABLE050A is for a 5.0 m cable, and the letter A.
2
7 Can have up to 2 or 3 expander modules depending upon master used (total 32 outputs or less). An extender cable is provided.
‡ The 1492-XIM24-16RF is to be used with one 1492-XIM4024-16R or 1492-XIM4024-16RF master (32 pts. max.).
♣ The LED indicates the PLC output status.
³ Compatible RTB plug; 1492-RTB20N (screw style terminal) or 1492-RTB20P. ORDER PLUGS SEPARATELY. 2 plugs per cat. no.
a Compatible RTB plug; 1492-RTB17N (screw style terminal) or 1492-RTB17P. ORDER PLUGS SEPARATELY. 2 plugs per cat. no.
 Compatible RTB plug; 1492-RTB14N (screw style terminal) or 1492-RTB14P. ORDER PLUGS SEPARATELY. 2 plugs per cat. no.
™ Compatible RTB plug; 1492-RTB12N (screw style terminal) or 1492-RTB12P. ORDER PLUGS SEPARATELY. 2 plugs per cat. no.
3
Bulletin 1769 Compact I/O for CompactLogix and MicroLogix 1500 IFMs and Cables
4
These pre-wired cables have a pre-wired RTB on one end to connect to the front of a Bulletin 1769 digital I/O module and a connector on
the other end to plug into a 20-terminal IFM/XIM. You must first select the IFM/XIM from the preceding selection table.
Cable Cat. No.
Standard Cable
Lengths
Build-to-Order
Available
No. of Conductors
Mating 1769 I/O Module Cat. No.
1492-CAB9A69
0.5, 1.0, 2.5, 5.0 m
Yes
20
1769-IA16
1492-CAB9B69
0.5, 1.0, 2.5, 5.0 m
Yes
20
1769-IQ16
1492-CAB9C69
0.5, 1.0, 2.5, 5.0 m
Yes
20
1769-OA8, -OW8
1492-CAB9D69
0.5, 1.0, 2.5, 5.0 m
Yes
20
1769-OW8I
1492-CAB9E69
0.5, 1.0, 2.5, 5.0 m
Yes
20
1769-OB16, -OV16
1492-CAB9F69
0.5, 1.0, 2.5, 5.0 m
Yes
20
1769-IA8I
5
6
1492-CAB9G69
0.5, 1.0, 2.5, 5.0 m
Yes
20
1769-IM12
1492-CAB9H69
0.5, 1.0, 2.5, 5.0 m
Yes
20
1769-OA16, -OW16 (IFM modules with single common)
1492-CAB9J69
0.5, 1.0, 2.5, 5.0 m
Yes
40
1769-IQ32
1492-CAB9K69
0.5, 1.0, 2.5, 5.0 m
Yes
40
1769-OB32
7
1492-CAB9L69
0.5, 1.0, 2.5, 5.0 m
Yes
20
1769-OB8
1492-CAB9M69
0.5, 1.0, 2.5, 5.0 m
Yes
20
1769-OA16, -OW16 (IFM modules with multiple commons)
1492-CABLE9H
0.5, 1.0, 2.5, 5.0 m
Yes
40
1769-IQ32T, -OB32T, -OV32T
9 Cables are available in standard lengths of 0.5, 1.0, 2.5, and 5.0 m. To order, insert the code for the desired cable length into the cat. no. (005 = 0.5 m, 010 =
8
1.0 m, 025 = 2.5 m, and 050 = 5.0 m). Example: Cat. No. 1492-CAB005E69 is for a 0.5 m cable that can be used to connect a Cat. No. 1492-IFM20D24N IFM
to a Cat. No. 1769-OB16 I/O module.
The I/O module-ready cables have a pre-wired RTB on one end to plug onto the front of a Bulletin 1769 I/O module and 20 individually
colored #18 AWG conductors on the other end. These cables provide the convenience of pre-wired connections at the I/O module end, while
still allowing the flexibility to fieldwire to standard terminal blocks of your choice.
9
I/O Module-Ready Cables for Bulletin 1769 Digital I/O Modules §
Cable Cat. No.
Standard Cable
Lengths
Build-to-Order
Available
No. of Conductors
Mating 1769 I/O Module Cat. No.
7RTN10
1492-CAB7
1.0, 2.5, 5.0 m
Yes
12
1769-OA8, -OW8, -OB8
7RTN18
1492-CAB7
1.0, 2.5, 5.0 m
Yes
20
1769-IA8I, -IA16, -IQ16, IQ16F, -OA16, -OB16, -OV16, -OW16, OW8I, -IM12, -OW16, -0B8
7RTN32I
1492-CAB7
1.0, 2.5, 5.0 m
Yes
40‡
1769-IQ32
7RTN32O
1492-CAB7
1.0, 2.5, 5.0 m
Yes
40‡
1769-OB32
7N3
1492-CABLE7
1.0, 2.5, 5.0 m
Yes
40‡
1769-IQ32T, -OB32T, -OV32T
10
11
7 Cables are available in standard lengths of 1.0, 2.5, and 5.0 m. To order, insert the code for the desired cable length into the cat. no. (010 = 1.0 m, 025 = 2.5 m,
and 050 = 5.0 m). Example: Cat. No. 1492-CAB050RTN10 is for a 5.0 m cable with a wired Cat. No. 1769-RTBN10 on one end.
‡ Use #22 AWG wire.
§ Discrete I/O ready cables should not be used with PLC analog I/O modules as a cable shield and drain wire are not provided.
12
13
Visit our website: www.ab.com/catalogs
Preferred availability cat. nos. are printed in bold
12-147
08_1769_Analog_a.qxd
4/30/2008
10:42 AM
Page 12-148
Bulletin 1492
Programmable Wiring Systems
Product Selection, Continued
Bulletin 1769 Compact I/O for CompactLogix and MicroLogix 1500 Controller AIFM and Cable Selection Table
AIFMs for Bulletin 1769 Analog I/O Modules9
!
IF4 (Differential Current)
IF8 (Differential Current)
IF4XOF2 or IF4FXOF2F (Cur In & out)
IF4XOF2 or IF4FXOF2F (Volt In & out)
IF4XOF2 or IF4FXOF2F (Cur In & Volt out)
IR6
OF2 (Voltage)
OF8V (Voltage)
OF2 (Current)
OF8C (Current)
BA69
—
BB69
—
BC69
—
BD69
—
—
—
—
—
AA69
—
AB69
—
6-channel isolated with
3…4 terminals/channel
1492-AIFM6S-3
1492-RAIFM6S-3§
—
—
—
—
—
—
—
—
—
CA69
CB69
CC69
C69
—
—
—
—
8-channel differential
16-channel singleended with 3
terminals/channel
1492-AIFM8-3
1492-RAIFM8-3♣
—
—
EA69
—
EB69
—
EC69
—
ED69
—
—
—
—
—
D69
—
D69
6-channel with 3
terminals/channel
1492-AIFM6TC-3
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
2-channel counter
input/4 outputs
1492-AIFMCE4
—
HA69
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
HSC
IF4 (Differential Voltage)
—
IF8 (Single-Ended Current)
1492-RAIFM4-3‡
Description
Cat. No. for
Wiring System
Module with
Fixed Temrinal
Block
IF4 (Single-Ended Current)
1492-AIFM4-3
2
Cat. No. for
Wiring System
Module with
Removable
Terminal Block
Socket Assembly
(order plugs
separately)
IF8 (Single-Ended Voltage)
4-channel input, output
or 2-in/2-out
combination with 3
terminals/channel
1
IF4 (Single-Ended Voltage)
IF8 (Differential Voltage)
I/O Module Cat. No. 1769-…
Feed-through
3
4
Thermocouple
5
—
—
High-Speed Counter/Encoder
—
—
—
—
Fused High-Speed Counter/Encoder
6
2-channel fused
counter input/4 fused
outputs
1492-AIFMCE4-F
—
HA69
—
—
—
—
—
Fusible Analog
7
8
9
10
4-channel with 24V
blown fuse indicators,
test points, 5
terminals/input
1492-AIFM4I-F-5
—
—
BA69
—
BB69
—
BC69
—
BD69
—
—
—
—
—
—
—
—
—
2-channel output, 2channel input with 24V
blown fuse indicators,
test points, 5
terminals/input, 3
terminals/output
1492-AIFM4C-F-5
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
8-channel with 24V DC
blown fuse indicators, 5
terminals/channel
1492-AIFM8-F-5
—
—
—
EA69
—
EB69
—
EC69
—
ED69
CA69
CB69
CC69
—
—
—
—
—
16-channel input with
24V DC blown fuse
indicators, 3
terminals/channel
1492-AIFM16-F-3
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
16-channel input with
24V DC blown fuse
inidcators, 5
terminals/channel
1492-AIFM16-F-5
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
16-channel input with
24V DC blown fuse
inidcators, 5
terminals/channel
1492-AIFMQS
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
9 Cables are available in standard lengths of 0.5, 1.0, 2.5, and 5.0 m. To order, insert the code for the desired cable length into the catalog number, e.g., 005 =
11
0.5 m (010 = 1.0 m, 025 = 2.5 m, and 050 = 5.0 m), and insert the letter in the box. Example: Cat. No. 1492-ACAB025BA69 is for a 2.5 m cable, and the
letters BA.
‡ Compatible RTB plug 1492-RTB8N (screw style terminal) or 1492-RTB8P. Order plugs separately. 2 plugs per cat. no.
§ Compatible RTB plug 1492-RTB12N (screw style terminal) or 1492-RTB12P. Order plugs separately. 2 plugs per cat. no.
♣ Compatible RTB plug 1492-RTB16N (screw style terminal) or 1492-RTB16P. Order plugs separately. 2 plugs per cat. no.
12
13
Visit our website: www.ab.com/catalogs
12-148
Preferred availability cat. nos. are printed in bold
08_1769_Analog_a.qxd
4/30/2008
10:43 AM
Page 12-149
Bulletin 1492
Programmable Wiring Systems
Product Selection, Continued
These pre-wired cables have a pre-wired RTB on one end to connect to the front of a Bulletin 1769 analog I/O module and a connector on
the other end to plug into a 20-terminal AIFM. You must first select the AIFM from the preceding selection table.
!
Pre-Wired Cables for Bulletin 1769 Analog I/O Modules
Cable Cat. No.
Standard Cable Length
Build-to-Order Available
Type of IFM/AIFM/XIM
1492-ACAB9AA69
0.5, 1.0, 2.5, 5.0 m
Yes
15-pin D-shell
Mating I/O Module Cat. No.
1769-OF2 Voltage
1492-ACAB9AB69
0.5, 1.0, 2.5, 5.0 m
Yes
15-pin D-shell
1769-OF2 Current
1492-ACAB9BA69
0.5, 1.0, 2.5, 5.0 m
Yes
15-pin D-shell
1769-IF4 Single-Ended Voltage
1769-IF4 Single-Ended Current
1492-ACAB9BB69
0.5, 1.0, 2.5, 5.0 m
Yes
15-pin D-shell
1492-ACAB9BC69
0.5, 1.0, 2.5, 5.0 m
Yes
15-pin D-shell
1769-IF4 Differential Voltage
1492-ACAB9BD69
0.5, 1.0, 2.5, 5.0 m
Yes
15-pin D-shell
1769-IF4 Differential Current
1
2
1492-ACAB9C69
0.5, 1.0, 2.5, 5.0 m
Yes
25-pin D-shell
1769-IR6
1492-ACAB9CA69
0.5, 1.0, 2.5, 5.0 m
Yes
25-pin D-shell
1769-IF4X0F2 or -IF4FX0F2F (Cur In and Out)
1492-ACAB9CB69
0.5, 1.0, 2.5, 5.0 m
Yes
25-pin D-shell
1769-IF4X0F2 or -IF4FX0F2F (Volt In and Out)
1492-ACAB9CC69
0.5, 1.0, 2.5, 5.0 m
Yes
25-pin D-shell
1769-IF4X0F2 or -IF4FX0F2F (Cur In and Volt Out)
1492-ACAB9D69
0.5, 1.0, 2.5, 5.0 m
Yes
25-pin D-shell
1769-OF8C, 1769-OF8V
1492-ACAB9EA69
0.5, 1.0, 2.5, 5.0 m
Yes
25-pin D-shell
1769-IF8 Single-Ended Voltage
1769-IF8 Single-Ended Current
1492-ACAB9EB69
0.5, 1.0, 2.5, 5.0 m
Yes
25-pin D-shell
1492-ACAB9EC69
0.5, 1.0, 2.5, 5.0 m
Yes
25-pin D-shell
1769-IF8 Differential Voltage
1492-ACAB9ED69
0.5, 1.0, 2.5, 5.0 m
Yes
25-pin D-shell
1769-IF8 Differential Current
1492-ACAB9HA69
0.5, 1.0, 2.5, 5.0 m
Yes
25-pin D-shell
1769-HSC Counter/Encoder
3
4
9 Cables are available in standard lengths of 0.5 m, 1.0 m, 2.5 m, and 5.0 m. To order, insert the code for the desired cable length into the cat. no. (005 = 0.5 m,
010 = 1.0 m, 025 = 2.5 m, and 050 = 5.0 m). Example: Cat. No. 1492-ACAB005AA69 is for a 0.5 m cable that connects a 1492-AIFM4-3 to a 1769-OF2 analog
output in voltage mode.
5
6
7
8
9
10
11
12
13
Visit our website: www.ab.com/catalogs
Preferred availability cat. nos. are printed in bold
12-149
09_1771_Digital.qxd
4/30/2008
10:53 AM
Page 12-150
Bulletin 1492
Programmable Wiring Systems
Product Selection, Continued
Bulletin 1771 PLC-5 IFM and Cable Selection Table
IFMs for Bulletin 1771 Digital 8-Point and 16-Point I/O Modules ‡
!
Description of 20-Pin IFM
1
2
3
4
5
6
7
8
9
10
11
12
Feed-through
1492-IFM20F
1492-RIFM20Fa
— — F — F
F
F
F — — F — 9
9
F
Narrow standard 132V AC/DC Max.
1492-IFM20FN
1492-RIFM20FN
— — F — F
F
F — — — F — 9
9
F — 9
Extra terminals (2 per I/O) 264V AC/DC
Max.
1492-IFM20F-2
1492-RIFM20F-2a
— — F — F
F
F
9
F
3-wire sensor type input devices 132V
AC/DC Max.
1492-IFM20F-3
—
— — F — F
F
F — — — F — — — — — —
Standard with 24V AC/DC LEDs
1492-IFM20D24
Standard 264V AC/DC Max.
LED Indicating
—
F — — F — 9
F
F
9
9
— — — — F
F — — — — F — 9
9 — — 9
Narrow standard with 24V AC/DC LEDs
1492-IFM20D24N
—
— — — — F
F — — — — F — 9
9 — — 9
Standard with 120V AC/DC LEDs
1492-IFM20D120§
—
— — F — — — — — — — — — — — — — —
Narrow standard with 120V AC LEDs
1492-IFM20D120N
—
— — F — — — — — — — — — 9 — — — —
24V AC/DC LEDs and extra terminals for
outputs
1492-IFM20D24-2
—
— — — — — — — — — — — — 9
24V AC/DC LEDs and extra terminals for
inputs
1492-IFM20D24A-2
—
— — — — F
120V AC LEDs and extra terminals for
outputs
1492-IFM20D120-2
—
— — — — — — — — — — — — 9 — — — —
120V AC LEDs and extra terminals for
inputs
1492-IFM20D120A-2
—
— — F — — — — — — — — — — — — — —
3-wire sensor with 24V AC/DC LEDs
9 — — 9
F — — — — F — — — — — —
1492-IFM20D24-3
—
— — — — F
8 Individually isolated with 24/48V AC/DC
LEDs and 4 terminals/output
1492-IFM20DS24-4
—
— — — — — — — — — — — — — — — — —
8 Individually isolated with 120V AC LEDs
and 4 terminals/output
1492-IFM20DS120-4
—
— — — — — — — — — — — — — — — — —
240V AC LEDs and extra terminals for
outputs
1492-IFM20D240-2
—
— — — — — — — — — — — — — — — F —
240V AC LEDs and extra terminals for
inputs
1492-IFM20D240A-2
F — — — — — — — — — — —
—
— — — — — — — F — — — — — — — — —
Fusible
120V AC/DC with extra terminals for
outputs
1492-IFM20F-F-2
1492-RIFM20F-F-2a
— — — — — — — — — — — — F
F — — F
Extra terminals with 24V AC/DC blown fuse
LED indicators
1492-IFM20F-F24-2
1492-RIFM20F-F24-2a
— — — — — — — — — — — — F
F — — F
Extra terminals with 120V AC/DC blown
fuse LED indicators
1492-IFM20F-F120-2
1492-RIFM20F-F120-2a
— — — — — — — — — — — — F — — — —
Extra terminals with 240V AC/DC blown
fuse LED indicators
1492-IFM20F-F240-2
—
— — — — — — — — — — — — — — — F —
Extra terminals with 24V AC/DC blown fuse
LED indicators for inputs
1492-IFM20F-F24A-2
1492-RIFM20F-F24A-2a
Extra terminals with 120V AC/DC blown
fuse LED indicators for inputs
1492-IFM20F-F120A-2
1492-RIFM20F-F120A-2a — — F — — — — — — — — — — — — — —
8 Individually isolated 120V AC/DC with
extra terminals for outputs
1492-IFM20F-FS-2
—
— — — — — — — — — — — — — — — — —
8 Individually isolated with extra terminals
and 24V AC/DC blown fuse LED indicators
1492-IFM20F-FS24-2
—
— — — — — — — — — — — — — — — — —
Two 4-point isolated groups with four
terminals/input and 24V AC/DC blown fuse
LED indicators
1492-IFM20F-FS24A-4
—
— — — T — — — — T
8 Individually isolated with extra
terminals/output and 120V AC/DC blown
fuse LED indicators
1492-IFM20F-FS120-2
—
— — — — — — — — — — — — — — — — —
8 Individually isolated with 4
terminals/output and 120V AC/DC blown
fuse LED indicators
1492-IFM20F-FS120-4
—
— — — — — — — — — — — — — — — — —
1492-IFM20F-FS120A-4
—
T
1492-IFM20F-FS240-4
—
— — — — — — — — — — — — — — — — —
Two 4-point isolated groups with four
terminals/input and 120V AC/DC blown
fuse indicators
8 Individually isolated with 4
terminals/output and 240V AC/DC blown
fuse LED indicators
13
Cat. No. for Wiring
System Module with
Fixed Terminal Block
Cat. No. for Wiring System
I/O Module Cat. No. 1771-…
Module with Removable
Terminal Block Socket
I I
I I I I
I
O O O O O
Assembly (order plugs
I A A I B C G M I I N I A B G M N
separately)
A 2 D B D D D D H N D T D D D D D
— — — — F
T — T — — — — —
T — — — — — — — — — — — — — — —
Note: Footnotes are on page 12-151.
Visit our website: www.ab.com/catalogs
12-150
F — — — — F — — — — — —
Preferred availability cat. nos. are printed in bold
09_1771_Digital.qxd
4/30/2008
10:53 AM
Page 12-151
Bulletin 1492
Programmable Wiring Systems
Product Selection, Continued
Description of 20-Pin IFM
Cat. No. for Wiring
System Module with
Fixed Terminal Block
Relay
Cat. No. for Wiring System
I/O Module Cat. No. 1771-…
Module with Removable
Terminal Block Socket
I I
I I I I
I
O O O O O
Assembly (order plugs
I A A I B C G M I I N I A B G M N
separately)
A 2 D B D D D D H N D T D D D D D
Master (LED Indicating) ♣³
20-pin master with eight 24V DC relays
1492-XIM2024-8R
—
20-pin master with eight 120V AC relays
1492-XIM20120-8R
—
— — — — — — — — — — — — — 9 — — —
— — — — — — — — — — — — 9 — — — —
20-pin master with sixteen 120V AC relays
1492-XIM20120-16R
—
— — — — — — — — — — — — 9 — — — —
20-pin master with sixteen 120V AC relays
with fusing
1492-XIM20120-16RF
—
— — — — — — — — — — — — 9 — — — —
20-pin master with sixteen 24V DC relays
1492-XIM2024-16R
—
— — — — — — — — — — — — — 9 — — —
20-pin master with sixteen 24V DC relays
with fusing
1492-XIM2024-16RF
—
— — — — — — — — — — — — — 9 — — —
!
1
2
Relay Expander (LED Indicating) ♣³
Expander with eight 24V DC relays
1492-XIM24-8R
—
— — — — — — — — — — — — — 7 — — —
Expander with eight 120V AC relays
1492-XIM120-8R
—
— — — — — — — — — — — — 7 — — — —
8-channel expander with 24V DC blown
fuse indicators
1492-XIMF-F24-2
—
— — — — — — — — — — — — — 7 — — —
8-channel expander with 120V AC blown
fuse indicators
1492-XIMF-F120-2
—
— — — — — — — — — — — — 7 — — — —
3
Fusible Expander
4
Feed-through Expander
Expander with eight feed-through channels
132V AC/DC max
1492-XIMF-2
—
— — — — — — — — — — — — 7 7 — — —
5
9 Either F or FF.
7 One expander is connected to a master to provide a total of 16 outputs. An extender cable is included with each expander to connect it to the master.
‡ Cables are available in standard length of 0.5, 1.0, and 5.0 m. To order, insert the code for the desired cable length into the catalog number 005 = 0.5 m (010 =
1.0 m, 025 = 2.5 m, and 050 = 5.0 m), and insert the letter in the box. Example: Catalog Number 1402-CABLE050A is for a 5.0 m cable, and the letter A.
§ This IFM is not recommended for use with PLC I/O modules that have an off-state leakage current exceeding 0.5 mA. Use a 1492-IFM20D120N or 1492IFM20D120A-2 for inputs. Use 1492-IFM20D120-2 for outputs.
6
³ The LED indicates the PLC output status.
a Compatible RTB plug 1492-RTB20N (screw style terminal) or 1492-RTB20P. Order plugs separately. 2 plugs per cat. no.
 Compatible RTB plug 1492-RTB10N (screw style terminal) or 1492-RTB10P. Order plugs separately. 2 plugs per cat. no.
7
8
9
10
11
12
13
Visit our website: www.ab.com/catalogs
Preferred availability cat. nos. are printed in bold
12-151
09_1771_Digital.qxd
4/30/2008
10:54 AM
Page 12-152
Bulletin 1492
Programmable Wiring Systems
Product Selection, Continued
IFMs for Bulletin 1771 Digital 16-Point Isolated and 32-Point I/O Modules ‡
I/O Module Cat. No. 1771-…
!
1
Description of 40-Pin IFM
Cat. No. for Wiring
System Module with
Fixed Terminal Block
Cat. No. for Wiring System
Module with Removable
Terminal Block Socket
Assembly (order plugs
separately)
I I
O
I I D Q I O O D O
A B 1 1 V A B 1 D
N N 6 6 N N N 6 D
O
Q O
1 V
6 N
O
W
1
6
O
O W
W N
N A
s
c
I
M
1
6
§
s
c
O
M
1
6
§
Feed-through
1492-IFM40F
1492-RIFM40F
J
J M M K
L
L M M M L
R
L
L — M
Extra terminals (2 per I/O) 132V AC/DC
Max.
1492-IFM40F-2
1492-RIFM40F-2
J
J — — K
L
L — — — L
R
L
L — —
3-wire sensor type input devices 60V
AC/DC Max.
1492-IFM40F-3
—
— J — — K — — — — — —
—
— — — —
Standard with 24V AC/DC LEDs
1492-IFM40D24
1492-RIFM40D24
— J — — K — L — — — L
—
L
L — —
24V AC/DC LEDs and extra terminals for
outputs
1492-IFM40D24-2
—
— — — — — — L — — — L
—
L
L — —
24V AC/DC LEDs and extra terminals for
inputs
1492-IFM40D24A-2
1492-RIFM40D24A-2
— J — — K — — — — — —
—
— — — —
120V AC LEDs and extra terminals for
outputs
1492-IFM40D120-2
—
— — — — — L — — — — —
—
L
120V AC LEDs and extra terminals for
inputs
1492-IFM40D120A-2
—
J — — — — — — — — — —
—
— — — —
Standard 132V AC/DC Max.
2
LED Indicating
3
4
1492-IFM40D24-3
—
— J — — K — — — — — —
—
— — — —
16 individually isolated with 24/48V AC/DC
LEDs and four terminals/output
1492-IFM40DS24-4
—
— — — — — — — — — M —
—
— — — —
16 individually isolated with 24V AC/DC
LEDs and four terminals/input
1492-IFM40DS24A-4
—
— — — M — — — — — — —
—
— — — —
16 individually isolated with 120V AC LEDs
and four terminals/output
1492-IFM40DS120-4
—
— — — — — — — M M — —
—
— — — M
16 individually isolated with 120V AC LEDs
and four terminals/input
1492-IFM40DS120A-4
—
— — M — — — — — — — —
—
— — — —
16 individually isolated with 240V AC LEDs
and four terminals/input
1492-IFM40DS240A-4
—
— — — — — — — — — — —
—
— — M —
1492-IFM40F-F-2
—
— — — — — L
L — — — L
—
L
L — —
1492-IFM40F-F24-2
1492-RIFM40F-F24-2
— — — — — — L — — — L
—
L
L — —
1492-IFM40F-F120-2
—
— — — — — L — — — — —
—
L
L — —
3-wire sensor with 24V AC/DC LEDs
5
6
7
Fusible
120V AC/DC with extra terminals for 32point outputs
Extra terminals with 24V AC/DC blown fuse
indicators for 32-point outputs
8
9
10
11
12
13
L — —
Extra terminals with 120V AC/DC blown
fuse indicators for outputs
16 individually isolated with extra terminals
for 120V AC/DC outputs
1492-IFM40F-FS-2
—
R71
— — — — — — — M M M —
— — — M
♣
16 individually isolated with extra terminals
and 24V AC/DC blown fuse indicators
1492-IFM40F-FS24-2
—
— — — — — — — — — M —
16 individually isolated with 24V AC/DC
blown fuse indicators and four
terminals/output
1492-IFM40F-FS24-4
—
— — — — — — — — — M —
—
— — — —
16 individually isolated 240V AC/DC with
four terminals/output
1492-IFM40F-FS-4
—
— — — — — — — — — M —
—
— — — —
16 individually isolated with extra terminals
and 120V AC/DC blown fuse LED
indicators
1492-IFM40F-FS120-2
1492-RIFM40F-FS120-2
— — — — — — — M M — —
16 individually isolated with 120V AC/DC
blown fuse indicators and four
terminals/output
1492-IFM40F-FS120-4
1492-RIFM40F-FS120-4™
— — — — — — — M M — —
—
— — — M
16 individually isolated with 240V AC/DC
blown fuse indicators and four
terminals/output
1492-IFM40F-FS240-4
—
— — — — — — — — — — —
—
— — — M
16 individually isolated with 24V AC/DC
blown fuse indicators and four
terminals/input
1492-IFM40F-FS24A-4
—
— — — M — — — — — — —
—
— — — —
16 individually isolated with 120V AC/DC
with four terminals/input
1492-IFM40F-FSA-4
—
— — M M — — — — — — —
—
— — — —
16 individually isolated with 120V AC/DC
blown fuse indicators and four
terminals/input
1492-IFM40F-FS120A-4
1492-RIFM40F-FS120A-4™ — — M — — — — — — — —
—
— — — —
Note: Footnotes are on page 12-153.
Visit our website: www.ab.com/catalogs
12-152
Preferred availability cat. nos. are printed in bold
R71
— — — —
♣
R71
— — — M
♣
09_1771_Digital.qxd
4/30/2008
10:54 AM
Page 12-153
Bulletin 1492
Programmable Wiring Systems
Product Selection, Continued
I/O Module Cat. No. 1771-…
Cat. No. for Wiring
System Module with
Removable Terminal
I I
O
O
Block Socket
I I D Q I O O D O Q O
Assembly (order
A B 1 1 V A B 1 D 1 V
plugs separately)
N N 6 6 N N N 6 D 6 N
Cat. No. for Wiring
System Module with
Fixed Terminal Block
Description of 40-Pin IFM
O
O
W O W
1 W N
6 N A
s
c
I
M
1
6
§
s
c
O
M
1
6
§
Fusible
16 Individually isolated with 240V AC/DC blown fuse indicators
and four terminals/input
1492-IFM40F-FS240A-4
—
— — — — — — — — — — — — — — — —
!
1
Relay Master (LED Indicating) ³a
40-pin master with eight 24V DC relays
1492-XIM4024-8R
— — — — — — L — — — — — — — — —
40-pin master with sixteen 24V DC relays
1492-XIM4024-16R
1492-RXIM4024-16R♠ — — — — — — L — — — — — — — — —
40-pin master with sixteen 24V DC relays with fusing
1492-XIM4024-16RF
—
— — — — — — L — — — — — — — — —
2
Relay Expander (LED Indicating) ³a
Expander with eight 24V DC relays
Expander with eight 120V AC relays
1492-XIM24-8R
1492-RXIM24-8R11
— — — — — — 9 — — — — — — — — —
1492-XIM120-8R
—
— — — — — — — — — — — — — — — —
8-channel expander with 24V DC blown fuse indicators
1492-XIMF-F24-2
—
— — — — — — 9 — — — — — — — — —
8-channel expander with 120V AC blown fuse indicators
1492-XIMF-F120-2
—
— — — — — — — — — — — — — — — —
Expander with sixteen 24V DC relays with fusing
1492-XIM24-16RF
—
— — — — — — 7 — — — — — — — — —
—
— — — — — — 9 — — — — — — — — —
Fusible Expander
Feed-through Expander
Expander with 8 feed-through channels 132V AC/DC max
1492-XIMF-2
3
4
9 Two or three expanders are connected to a master to provide a total of 32 outputs max (depends on PLX module). And extender cable is included with each expander to
connect it to the master.
7 One 1492-XIM24-16RF is to be used with one 1492-XIM4024-16R and 1492-XIM4024-16RF master (32 pt. only).
‡ Cables are available in standard length of 0.5, 1.0, and 5.0 m. To order, insert the code for the desired cable length into the catalog number 005 = 0.5 m (010 =
1.0 m, 025 = 2.5 m, and 050 = 5.0 m), and insert the letter in the box. Example: Catalog Number 1402-CABLE050A is for a 5.0 m cable, and the letter A.
§ For information concerning this I/O module, contact Spectrum Controls (phone: 425.641.9473 or www.spectrumcontrols.com).
♣ Cable Catalog Number 1492-CAB‡ has the N.O. contacts only connected.
a The LED indicates the PLC output status.
 Compatible RTB plug; 1492-RTB20N (screw style terminal) or 1492-RTB20P. ORDER PLUGS SEPARATELY. 2 plugs per cat. no.
™ Compatible RTB plug; 1492-RTB17N (screw style terminal) or 1492-RTB17P. ORDER PLUGS SEPARATELY. 2 plugs per cat. no.
♠ Compatible RTB plug; 1492-RTB14N (screw style terminal) or 1492-RTB14P. ORDER PLUGS SEPARATELY. 2 plugs per cat. no.
11
5
6
Compatible RTB plug; 1492-RTB12N (screw style terminal) or 1492-RTB12P. ORDER PLUGS SEPARATELY. 2 plugs per cat. no.
Bulletin 1771 PLC-5 IFMs and Cables, Continued
These pre-wired cables have a wiring arm on one end to connect to the front of a Bulletin 1771 digital I/O module and a connector on the
other end to plug into a 20- or 40-terminal IFM/XIM. You must first select the IFM/XIM from one of the preceding selection tables.
7
Pre-Wired Cables for Bulletin 1771 Digital I/O Modules
Cable Cat. No.
Standard Cable Lengths
Build-to-Order Available
No. of Conductors
Mating 1771 I/O Modules Cat. No.
1492-CABLE9F
0.5, 1.0, 2.5, 5.0 m
Yes
20
1771-IAD, -IBD, -ICD, -IGD, -IND, -OAD, -OBD, -OGD, -OMD, -OND, -IMD
1492-CABLE9FF
0.5, 1.0, 2.5, 5.0 m
Yes
20
1771-OAD, -OBD, -OND
1492-CABLE9J
0.5, 1.0, 2.5, 5.0 m
Yes
40
1771-IAN, -IBN
8
1492-CABLE9K
0.5, 1.0, 2.5, 5.0 m
Yes
40
1771-IVN
1492-CABLE9L
0.5, 1.0, 2.5, 5.0 m
Yes
40
1771-OAN, -OBN, -OVN, -OWN, -OWNA
1492-CABLE9M
0.5, 1.0, 2.5, 5.0 m
Yes
40
1771-ID16, -IQ16, -OD16, -ODD, -OQ16, -SCIM16, -SCOM16
1492-CABLE9R
0.5, 1.0, 2.5, 5.0 m
Yes
40
1771-OW16
1492-CAB9R717
0.5, 1.0, 2.5, 5.0 m
Yes
40
1771-OW16
1492-CABLE9T
0.5, 1.0, 2.5, 5.0 m
Yes
20
1771-IA, -IA2, -IB, -IH, -IN, -IT
9
9 Cables are available in standard lengths of 0.5 m, 1.0 m, 2.5 m, and 5.0 m. To order, insert the code for the desired cable length into the cat. no. (005 = 0.5 m, 010 = 1.0 m,
025 = 2.5 m, and 050 = 5.0 m). Example: Cat. No. 1492-CABLE005M is for a 0.5 m cable that could be used to connect a Cat. No. 1492-IFM40F IFM to a Cat. No. 1771ODD I/O module.
7 Cable Cat. No. 1492-CAB9R71 has only the N.O. contacts connected.
The I/O module-ready cables have a wiring arm on one end to plug onto the front of a Bulletin 1771 I/O module and 20 or 40 individually colored
#18 AWG conductors on the other end. These cables provide the convenience of pre-wired connections at the I/O module end, while still allowing
the flexibility to fieldwire to standard terminal blocks of your choice.
I/O Module-Ready Cables for 1771 Digital I/O Modules
Description
Standard Cable
Lengths
Build-to-Order
Available
No. of Conductors
Mating I/O Module Cat. No.
1492-CABLE‡WA
1.0, 2.5, 5.0 m
Yes
12
1771-IA, -IA2, -IB, -IC, -IH, -IM, -IN, -IT, -IV, -OA, -OB, -OC, -OM, -ON, -OP
1492-CABLE‡WD
1.0, 2.5, 5.0 m
Yes
12
1771-ID, -ID01, -OD, -ODZ, -OR, -OW, -OYL, -OZL
1492-CABLE‡WH
1.0, 2.5, 5.0 m
Yes
20
1771-IAD, -IBD, -ICD, -IGD, -IMD, -IND, -OAD, -OBD, -OGD, -OMD, -OND
1492-CABLE‡WHF§
1.0, 2.5, 5.0 m
Yes
20
1771-IBD, -OAD, -OBD, -OMD, -OND
1492-CABLE‡WN
1.0, 2.5, 5.0 m
Yes
40
1771-IAN, -IBN, -ID16, -IQ16, -IVN, -OAN, -OBN, -OD16, -ODD, -OQ16, -OVN, OW16, -OWN, -OWNA
‡ Cables are available in standard lengths of 1.0 m, 2.5 m, and 5.0 m. To order, insert the code for the desired cable length into the cat. no. (010 = 1.0 m, 025 = 2.5 m, and
050 = 5.0 m). Example: Cat. No. 1492-CABLE050WN is for a 5.0 m cable with a pre-wired Cat. No. 1771-WN wiring arm on one end.
§ Includes an optional 3A fuse in the Wiring Arm for 1771 PLC mating I/O Modules.
Visit our website: www.ab.com/catalogs
Preferred availability cat. nos. are printed in bold
12-153
10
11
12
13
10_1771_Analog_PF_IMF_BTO.qxd
4/30/2008
10:55 AM
Page 12-154
Bulletin 1492
Programmable Wiring Systems
Product Selection, Continued
Bulletin 1771 PLC-5 AIFMs and Cables
IFMs for Bulletin 1771 Analog I/O Modules
!
9
OFE3
OFE2
OFE1
IL
IR
IFF (Single-Ended)
Description of AIFM
IFF (Differential)
1
IFE (Single-Ended)
Cat. No. for
Wiring System
Module with
Fixed Terminal
Block
IFE (Differential)
I/O Module Cat. No. 1771-…
Cat. No. for
Wiring System
Module with
Removable
Terminal Block
Socket Assembly
(order plugs
separately)
Feed-through
2
4-channel input, output or 2-in/2-out combination with 3 terminals/channel
6-channel isolated with 3…4 terminals/channel
1492-AIFM4-3
1492-RAIFM4-3‡ — — — — — — G G G
1492-AIFM6S-3
1492-RAIFM6S-3§ — — — — — J — — —
1492-AIFM8-3
1492-RAIFM8-3♣
1492-AIFM6TC-3
—
— — — — — — — — —
4-channel with 24V blown fuse indicators, test points, 5 terminals/input7
1492-AIFM4I-F-5
—
— — — — — — — — —
2-channel output, 2-channel input with 24V blown fuse indicators, test points, 5
terminals/input, 3 terminals/output7
1492-AIFM4C-F-5
—
— — — — — — — — —
8-channel with 24V DC blown fuse indicators, 5 terminals/channel
1492-AIFM8-F-5
—
E E — — — — — — —
16-channel input with 24V DC blown fuse indicators, 3 terminals/channel
1492-AIFM16-F-3
—
— — F
F — — — — —
16-channel input with 24V DC blown fuse inidcators, 5 terminals/channel
1492-AIFM16-F-5
—
— — F
F — — — — —
1492-AIFMQS
—
— — — — — — — — —
8-channel differential 16-channel single-ended with 3 terminals/channel
E E
F
F
H — — — —
Thermocouple
6-channel with 3 terminals/channel7
3
4
Fusible
4-input/4-output channel with 8 fuses and 24V blown fuse indicators
5
6
9 Cables are available in standard length of 0.5, 1.0, and 5.0 m. To order, insert the code for the desired cable length into the catalog number 005 = 0.5 m (010 =
1.0 m, 025 = 2.5 m, and 050 = 5.0 m), and insert the letter in the box. Example: Catalog Number 1402-ACABLE025A46 is for a 2.5 m cable, and the letter A.
7 Cannot be used with SLC I/O.
‡ Compatible RTB plug 1492-RTB8N (screw style terminal) or 1492-RTB8P. Order plugs separately. 2 plugs per cat. no.
§ Compatible RTB plug 1492-RTB12N (screw style terminal) or 1492-RTB12P. Order plugs separately. 2 plugs per cat. no.
♣ Compatible RTB plug 1492-RTB16N (screw style terminal) or 1492-RTB16P. Order plugs separately. 2 plugs per cat. no.
These pre-wired cables have a wiring arm on one end to connect to the front of a Bulletin 1771 analog I/O module and a connector on the
other end to plug into a 20- or 40-terminal IFM. You must first select the IFM from the preceding selection table.
7
8
Cable Cat. No.
Standard Cable Lengths
Build-to-Order Available
AIFM Connector
1492-ACABLE9E
0.5, 1.0, 2.5, 5.0 m
Yes
25-pin D-shell
Mating 1771 I/O Modules
1771-IFE, -IFF Differential
1492-ACABLE9F
0.5, 1.0, 2.5, 5.0 m
Yes
25-pin D-shell
1771-IFE, -IFF Single-Ended
1492-ACABLE9G
0.5, 1.0, 2.5, 5.0 m
Yes
15-pin D-shell
1771-OFE1, -OFE2, -OFE3
1492-ACABLE9H
0.5, 1.0, 2.5, 5.0 m
Yes
25-pin D-shell
1771-IL
1492-ACABLE9J
0.5, 1.0, 2.5, 5.0 m
Yes
25-pin D-shell
1771-IR
9 Cables are available in standard lengths of 0.5, 1.0, 2.5, and 5.0 m. To order, insert the code for the desired cable length into the cat. no. (005 = 0.5 m, 010 =
1.0 m, 025 = 2.5 m, and 050 = 5.0 m). Example: Cat. No. 1492-ACABLE005E is for a 0.5 m cable that could be used to connect a Cat. No. 1492-AIFM8-3 IFM
to a Cat. No. 1771-IFE I/O module. Build-to-order lengths are also available.
9
PowerFlex 700H and 700S Drive IFM and Cable Selection Table
PowerFlex 700H and 700S Drive Digital Control I/O
10
11
Description of 20-Pin IFM
Cat. No. for
Wiring System
Module with
Fixed Terminal
Block
Cat. No. for
Wiring System
Module with
Removable
Terminal Block
Socket Assembly
(order plugs
seperately)
700H Drive I/O Module
20C-D01 & 20C-DA1-A
Feed-through
1492-RIFM20F9
700S Drive I/O Module
20C-D01 & 20CDA1-B
TB2
A7S
A7H
B7H
Narrow standard 132V AC/DC Max.
1492-IFM20FN
1492-RIFM20FN7
A7H
B7H
A7S
Extra terminals (2 per I/O) 264V AC/DC Max.
1492-IFM20F-2
1492-RIFM20F-29
A7H
B7H
A7S
Standard 264V AC/DC Max.
1492-IFM20F
12
7 Compatible RTB plug; Cat. Nos. 1492-RTB10N (screw style terminal) or 1492-RTB10P. ORDER PLUGS SEPARATELY. 2 plugs per cat. no.
13
Visit our website: www.ab.com/catalogs
12-154
Preferred availability cat. nos. are printed in bold
10_1771_Analog_PF_IMF_BTO.qxd
4/30/2008
10:55 AM
Page 12-155
Bulletin 1492
Programmable Wiring Systems
Product Selection, Continued
Pre-Wired Cables for PowerFlex 700H and 700S Drive Digital I/O
Cable Cat. No.
Standard Cable Lengths
Build-to-Order Available
No. of Conductors
Mating 1762 Controller I/O Cat.
No.
1492-CAB9A7H
0.5, 1.0, 2.5, 5.0 m
Yes
20
20C-DA1-A & 20C-D01
1492-CAB9B7H
0.5, 1.0, 2.5, 5.0 m
Yes
20
20C-DA1-B & 20C-D01
1492-CAB9A7S
0.5, 1.0, 2.5, 5.0 m
Yes
20
Terminal TB2
9 Pre-wired cables are available in standard lengths of 0.5, 1.0, 2.5, and 5.0 m. To order, insert the code for the desired cable length into the cat. no. (005 =
0.5 m, 010 = 1.0 m, 025 = 2.5 m, and 050 = 5.0 m). Example: Cat. No. 1492-CAB005A7H is for a 0.5 m cable that could be used to connect a catalog number
1492-IFM20F IFM to a PowerFlex 700H drive 20C-D01 and 20C-DA1-A module.
!
1
PowerFlex 700H and 700S Drive Analog and Specialty Control I/O
Description of Analog IFM
Cat. No. for
Wiring System
Module with
Fixed Terminal
Block
Cat. No. for
700H Drive I/O Module
Wiring System
Module with
Removable
Terminal Block
Socket Assembly
(order plugs
20C-DA1-A or 20Cseperately)
DA1-B
700S Drive I/O Module
2
TB1 (Pins 1…12)
TB1 (Pins 13…24)
3
Feed-through
6-channel isolated with 3…4
terminals/channel
2-channel counter input/4 outputs
2-channel fused counter input/4 fused
outputs
1492-AIFM6S-3
1492-RAIFM6S-39
Z7H
Z7S
—
1492-AIFMCE4
—
—
—
X7S
1492-AIFMCE4-F
—
—
—
X7S
4
9 Compatible RTB plug; 1492-RTB12N (screw style terminals) or 1492-RTB12P (push-in style terminals, available May 2008). ORDER PLUGS SEPARATELY. 2
plugs per cat. no.
5
Pre-Wired Cables for PowerFlex 700H and 700S Drive Analog I/O
Cable Cat. No.
Standard Cable Lengths
Mating 1762 Controller I/O Cat.
No.
Build-to-Order Available
No. of Conductors
1492-ACAB9Z7H 0.5, 1.0, 2.5, 5.0 m
Yes
25-Pin D-Shell
20C-DA1-A or 20C-DA1-B I/O
Board
1492-ACAB9Z7S 0.5, 1.0, 2.5, 5.0 m
Yes
25-Pin D-Shell
TB1
1492-ACAB9X7S 0.5, 1.0, 2.5, 5.0 m
Yes
25-Pin D-Shell
TB1
9 Pre-wired cables are available in standard lengths of 0.5, 1.0, 2.5, and 5.0 m. To order, insert the code for the desired cable length into the cat. no. (005 =
0.5 m, 010 = 1.0 m, 025 = 2.5 m, and 050 = 5.0 m). Example: Cat. No. 1492-ACAB005Z7S is for a 0.5 m cable that could be used to connect a Cat. No. 1492AIFM6S-3 analog IFM to a PowerFlex 700S drive analog terminal I/O.
IFM-Ready I/O Cables
IFM-ready cables have a cable connector on one end to attach to the IFM and either 20 or 40 individually colored conductors on the other
end (CABLE9P and CABLE9Q, respectively). These cables allow the IFM to be used in specialty applications that require a custom
connection.
Cable Cat. No.
Standard Cable
Lengths
Insulation
Rating
No. Conductors
Conductor
Size
Nominal Outer
Diameter
Current/
Conductor
Compatible IFM
Cat. Nos.
1492-CABLE7P 1.0, 2.5, 5.0 m
300V, 80°C
20
22 AWG
9 mm (0.36 in.)
2A
1492-IFM20…,
1492-XIM20…
1492-CABLE7Q 1.0, 2.5, 5.0 m
300V, 80°C
40
22 AWG
11.7 mm (0.46 in.)
2A
1492-IFM40…,
1492-XIM40…
7 IFM-ready cables are available in lengths of 1.0, 2.5, and 5.0 m. To order, insert the desired cable length into the cat. no. (010 = 1.0 m, 025 = 2.5 m, and 050 =
5.0 m). Example: Cat. No. 1492-CABLE025P is for a 2.5 m, 20 conductor IFM-ready cable. Also refer to Build-to-Order Length Cables below.
6
7
8
9
10
Build-to-Order Length Cable Selection
Cable Lengths
Increment Size
Cable Length Codes
Example Cat. No.
0.1…2.0 m
0.1 m
001…020
1492-CABLE015A (1.5 m cable)
2.0…10.0 m
0.5 m
020…100
1492-CABLE075P (7.5 m cable)
10.0…99.0 m
1.0 m
100…990
1492-CABLE150RTBB (15.0 m cable)
All Bulletin 1492 cables are available in build-to-order lengths. Consult your local Rockwell Automation sales office or Allen-Bradley distributor
for availability.
11
12
13
Visit our website: www.ab.com/catalogs
Preferred availability cat. nos. are printed in bold
12-155
14_Specifications.qxd
4/30/2008
10:56 AM
Page 12-156
Bulletin 1492
Programmable Wiring Systems
Specifications
Digital IFM Specifications
!
Digital IFM Cat. No.
Voltage
Range
Dimensions
(W x H x D) [in.]9
Indicator Circuit
Current (Nominal) [mA]
Label Card Cat. No.7
1492-IFM20F, -RIFM20F
0…264V AC/DC
4.33 x 3.27 x 2.78‡
—
46006-190-01, 46006-233-01
1492-IFM20FN, -RIFM20FN
0…132V AC/DC
2.36 x 3.27 x 2.78‡
—
46006-197-01, -237-01, -220-01
1492-IFM20F-2, -RIFM20F-2
0…264V AC/DC
4.33 x 3.27 x 2.78‡
—
46006-192-01, -235-01, -221-01
1492-IFM20F-3
0…132V AC/DC
4.33 x 3.27 x 2.78
—
46006-210-01
1492-IFM20D24
10…30V AC/DC
4.33 x 3.27 x 2.78
2
46006-190-01, 46006-233-01
1
2
3
4
5
6
7
8
9
10
11
12
13
1492-IFM20D24N
10…30V AC/DC
2.36 x 3.27 x 2.78
2
46006-197-01, -237-01, -220-01
1492-IFM20D24-2
10…30V AC/DC
4.33 x 3.27 x 2.78
2
46006-192-01, -235-01, -221-01
1492-IFM20D24A-2
10…30V AC/DC
4.33 x 3.27 x 2.78
2
46006-211-01
1492-IFM20DS24-4
10…60V AC/DC
4.33 x 3.27 x 2.78
1.6
46006-209-01
1492-IFM20D24-3
10…30V AC/DC
4.33 x 3.27 x 2.78
2
46006-193-01, 46006-236-01
1492-IFM20D120
85…132V AC/DC
4.33 x 3.27 x 2.78
2.5
46006-190-01, 46006-233-01
1492-IFM20D120N
85…132V AC
2.36 x 3.27 x 2.78
2.5
46006-197-01, -237-01, -220-01
1492-IFM20D120-2
85…132V AC
4.33 x 3.27 x 2.78
2.5
46006-192-01, -235-01
1492-IFM20D120A-2
85…132V AC
4.33 x 3.27 x 2.78
2.5
46006-211-01
1492-IFM20DS120-4
85…132V AC
4.33 x 3.27 x 2.78
2.6
46006-209-01
1492-IFM20D240-2
204…264V AC
4.33 x 3.27 x 2.78
2.5
46006-192-01, -235-01
1492-IFM20D240A-2
204…264V AC
4.33 x 3.27 x 2.78
2.5
46006-211-01
1492-IFM20F-F-2, -RIFM20F-F-2
0…132V AC/DC
4.33 x 3.27 x 2.78‡
—
46006-192-01, -235-01, -221-01
46006-192-01, -235-01, -221-01
1492-IFM20F-F24-2, -RIFM20F-F24-2
10…30V AC/DC
4.33 x 3.27 x 2.78‡
2
1492-IFM20F-F24A-2, -RIFM20F-F24A-2
10…30V AC/DC
4.33 x 3.27 x 2.78‡
2.4
46006-212-01
1492-IFM20F-F120-2, -RIFM20F-F120-2
85…132V AC
4.33 x 3.27 x 2.78‡
2.5
46006-192-01, -235-01, -221-01
1492-IFM20F-F120A-2, -RIFM20F-F120A-2
85…132V AC/DC
4.33 x 3.27 x 2.78‡
1.2
46006-212-01
1492-IFM20F-F240-2
204…264V AC
4.72 x 3.27 x 2.78
1.2
46006-192-01, -235-01
1492-IFM20F-FS-2
0…132V AC/DC
2.36 x 3.27 x 2.78
—
46006-204-01
1492-IFM20F-FS24-2
10…30V AC/DC
2.36 x 3.27 x 2.78
2
46006-204-01
1492-IFM20F-FS24A-4
10…30V AC/DC
3.15 x 3.27 x 2.78
2.4
46006-215-01
1492-IFM20F-FS120-2
85…132V AC/DC
2.36 x 3.27 x 2.78
2.5
46006-204-01
1492-IFM20F-FS120-4
85…132V AC/DC
4.33 x 3.27 x 2.78
1.2
46006-214-01
1492-IFM20F-FS120A-4
85…132V AC/DC
3.15 x 3.27 x 2.78
2.2
46006-215-01
1492-IFM20F-FS240-4
204…264V AC
4.33 x 3.27 x 2.78
1.2
46006-214-01
1492-IFM40F, -RIFM40F
0…132V AC/DC
4.33 x 3.27 x 2.78‡
—
46006-191-01, 46006-234-01
1492-IFM40F-2
0…132V AC/DC
8.27 x 3.27 x 2.78
—
46006-224-01, -225-01, -239-01, -240-01
1492-RIFM40F-2
0…132V AC/DC
9.05 x 3.27 x 2.78
—
46006-224-01, -225-01, -239-01, -240-01
1492-IFM40F-3
0…60V AC/DC
8.27 x 3.27 x 2.78
—
46006-193-01, 46006-236-01
1492-IFM40D24, -RIFM40D24
10…30V AC/DC
4.33 x 3.27 x 2.78‡
2
46006-191-01, 46006-234-01
1492-IFM40D24-2
10…30V AC/DC
8.27 x 3.27 x 2.78
2
46006-194-01, -195-01
1492-IFM40D24A-2
10…30V AC/DC
8.27 x 3.27 x 2.78
2
46006-224-01, -225-01, -239-01, -240-01
1492-RIFM40D24A-2
10…30V AC/DC
9.05 x 3.27 x 2.78
2
46006-224-01, -225-01, -239-01, -240-01
1492-IFM40DS24-4
10…60V AC/DC
6.69 x 3.27 x 2.78
4.1
46006-208-01
1492-IFM40DS24A-4
10…30V AC/DC
6.69 x 3.27 x 2.78
4.1
46006-208-01
1492-IFM40D24-3
10…30V AC/DC
8.27 x 3.27 x 2.78
2
46006-193-01, 46006-236-01
1492-IFM40D120-2
85…132V AC
8.27 x 3.27 x 2.78
2.5
46006-194-01, -195-01
1492-IFM40D120A-2
85…132V AC
8.27 x 3.27 x 2.78
2.5
46006-194-01, -195-01
1492-IFM40DS120-4
85…132V AC
6.69 x 3.27 x 2.78
2.6
46006-208-01
1492-IFM40DS120A-4
85…132V AC
6.69 x 3.27 x 2.78
2.6
46006-208-01
1492-IFM40DS240A-4
204…264V AC
6.69 x 3.27 x 2.78
2.6
46006-208-01
1492-IFM40F-F-2
0…132V AC/DC
8.27 x 3.27 x 2.78
—
46006-194-01, -195-01
1492-IFM40F-F24-2
10…30V AC/DC
8.27 x 3.27 x 2.78
2
46006-224-01, -225-01, -239-01, -240-01
1492-RIFM40F-F24-2
10…30V AC/DC
8.66 x 3.27 x 2.78
2
46006-224-01, -225-01, -239-01, -240-01
1492-IFM40F-F24D-2
10…30V AC/DC
4.72 x 3.27 x 2.78
<0.05
46006-201-01
1492-IFM40F-F24AD-4
10…30V AC/DC
7.09 x 3.27 x 2.78
<0.05
46006-206-01
1492-IFM40F-F120-2
85…132V AC
8.27 x 3.27 x 2.78
2.5
46006-194-001, -195-01
1492-IFM40F-FS-2
0…132V AC/DC
4.72 x 3.27 x 2.78
—
46006-201-01
1492-IFM40F-FS-4
0…264V AC/DC
7.09 x 3.27 x 2.78
—
46006-207-01
1492-IFM40F-FS24-2
10…30V AC/DC
4.72 x 3.27 x 2.78
2
46006-201-01
1492-IFM40F-FS24-4
10…30V AC/DC
7.09 x 3.27 x 2.78
2.4
46006-207-01
1492-IFM40F-FS120-2, -RIFM40F-FS120-2
85…132V AC/DC
4.72 x 3.27 x 2.78‡
2.5
46006-201-01
1492-IFM40F-FS120-4
85…132V AC/DC
7.09 x 3.27 x 2.78
1.4
46006-206-01
Note: Footnotes are on page 12-157.
Visit our website: www.ab.com/catalogs
12-156
Preferred availability cat. nos. are printed in bold
14_Specifications.qxd
4/30/2008
10:56 AM
Page 12-157
Bulletin 1492
Programmable Wiring Systems
Specifications, Continued
Digital IFM Cat. No.
Voltage
Range
Dimensions
(W x H x D) [in.]9
Indicator Circuit
Current (Nominal) [mA]
Label Card Cat. No.7
1492-RIFM40F-FS120-4
85…132V AC/DC
7.87 x 3.27 x 2.78
1.4
46006-226-01
1492-IFM40F-FS240-4
204…264V AC/DC
7.09 x 3.27 x 2.78
2.4
46006-207-01
1492-IFM40F-FS24A-4
10…30V AC/DC
7.09 x 3.27 x 2.78
3.1
46006-226-01
1492-IFM40F-FS120A-4
85…132V AC/DC
7.09 x 3.27 x 2.78
1.4
46006-226-01
1492-RIFM40F-FS120A-4
85…132V AC/DC
7.87 x 3.27 x 2.78
1.4
46006-226-01
1492-IFM40F-FSA-4
85…132V AC/DC
7.09 x 3.27 x 2.78
—
46006-226-01
1492-IFM40F-FS240A-4
85…132V AC/DC
7.09 x 3.27 x 2.78
1.4
46006-226-01
!
1
9 To convert to millimeters, multiply inches by 25.4
7 Ships with each module. For spare part, precede the aprt number with the letter "W."
‡ Add 0.39 in. to the width dimension for Bulletin 1492-Rxxx modules.
2
Analog IFM Specifications
Analog IFM Cat. No.
Voltage
Range
Max. Current
(Per Circuit) [A]
Max. Current
(Per Module) [A]
Dimensions
(W x H x D) [in.]
Indicator Circuit
Current (Nominal)
[mA]
Label Card Cat. No.7
1492-AIFM4-3, -RAIFM4-3
0…10V DC
2
12
2.36 x 3.27 x 2.74‡
—
46006-205-01
1492-AIFM4C-F-5
10…30V DC
2
12
3.15 x 3.27 x 2.74
2
46006-203-01
1492-AIFM4I-F-5
10…30V DC
2
12
3.15 x 3.27 x 2.74
2
46006-203-01
1492-AIFM6S-3, -RAIFM6S-3
0…132V AC/DC
2
12
3.15 x 3.27 x 2.74‡
—
46006-202-01
1492-AIFM6TC-3
0…132V AC/DC
2
12
3.15 x 3.27 x 2.74
—
46006-202-01
1492-AIFMCE4
5…32V AC/DC
2
8
5.12 x 3.27 x 2.74
—
46006-232-01
46006-232-01
1492-AIFMCE4-F
5…32V AC/DC
2
8
5.12 x 3.27 x 2.74
1 mA @ 5V DC
6 mA @ 24V DC
1492-AIFM8-3, -RAIFM8-3
0…132V AC/DC
2
12
4.33 x 3.27 x 2.74‡
—
46006-200-01, 46006-238-01
1492-AIFM8-F-5
10…30V DC
2
12
4.72 x 3.27 x 2.74
2
46006-196-01
1492-AIFM16-F-3
10…30V DC
2
12
4.72 x 3.27 x 2.74
2
46006-213-01
1492-AIFM16-F-5
10…30V DC
2
12
8.27 x 3.27 x 2.74
2
46006-198-01
1492-AIFMQS
10…30V DC
3
12
4.72 x 3.27 x 2.74
2
46006-199-01
1492-AIFMPI
0…30V DC
2
12
4.72 x 3.27 x 2.74
2
46006-243-01
3
4
5
6
7 Ships with each module. For spare part, precede the part number with the letter "W."
‡ Add 0.39 in. to the width dimension for Bulletin 1492-Rxxx modules.
7
Relay Master/Expandable Interface Module Specifications
Relay Master/Expandable XIM
Cat. No.
Voltage
Range
Max. Current (Per
Circuit/Per Relay
Pair) [A]
Max. Current (Per
Module) [A]
Dimensions
(W xH x D) [in.]
Indicator Circuit
Current (Nominal)
[mA]
Label Card
Cat. No.7
1492-XIM4024-16R, -RXIM4024-16R
20…26V DC
10/12
48
9.06 x 3.27 x 2.78
2
46006-222-01
1492-XIM4024-8R
20…26V DC
10/12
48
6.30 x 3.27 x 2.78
2
46006-216-01
1492-XIM2024-8R
20…26V AC
10/12
48
6.30 x 3.27 x 2.78
2
46006-216-01
1492-XIM20120-8R
96…132V AC
10/12
48
6.30 x 3.27 x 2.78
2
46006-216-01
1492-XIM24-8R, RXIM24-8R
20…26V AC
10/12
48
6.30 x 3.27 x 2.78
2
46006-217-01
1492-XIM120-8R
96…132V AC
10/12
48
6.30 x 3.27 x 2.78
2
46006-217-01
1492-XIM2024-16R
20…26V DC
10/12
96
10.65 x 3.27 x 2.78
2
46006-223-01
1492-XIM2024-16RF
20…26V DC
10/12
96
10.65 x 3.27 x 2.78
2
46006-223-01
1492-XIM20120-16R
96…132V AC
10/12
96
10.65 x 3.27 x 2.78
2
46006-223-01
1492-XIM20120-16RF
96…132V DC
10/12
96
10.65 x 3.27 x 2.78
2
46006-223-01
1492-XIM4024-16RF
20…26V AC
10/12
96
11.5 x 3.27 x 2.78
2
46006-223-01
1492-XIMF-2
0…132V AC/DC
2/NA
4
3.15 x 3.27 x 2.19
—
46006-218-01
1492-XIMF-F24-2
10…30V DC
2/NA
4
3.15 x 3.27 x 2.19
2
46006-218-01
1492-XIMF-F120-2
85…132V AC
2/NA
4
3.15 x 3.27 x 2.19
2
46006-218-01
1492-XIM24-16RF
20…26V AC
10/12
96
11.5 x 3.27 x 2.78
2
46006-219-01
8
9
10
11
7 Ships with each module. For spare part, precede the aprt number with the letter "W."
12
13
Visit our website: www.ab.com/catalogs
Preferred availability cat. nos. are printed in bold
12-157
14_Specifications.qxd
4/30/2008
10:56 AM
Page 12-158
Bulletin 1492
Programmable Wiring Systems
Specifications, Continued
General Wiring System Specifications
Catalog Number 1492-...
!
cULus Listed: Hazardous Locations: Class I Div 2 (all except modules with
relays); Groups A, B, D, and D.
Temperature Code: T3C @ 60 °C.
Ordinary UL File No. E10314, Guide No. NRAG/NRAG7
Agency Certifications:
Modules and Cables
cULus Listed Locations; Module with relays; UL File No. E11372,
Guide No. NRAQ/NRAQ7
1
2
3
Factory Mutual (FM): Hazardous Locations; Class I Div 2 (all except modules
with relays): Groups A, B, C, and D. Temperature Rating: T3C @ 60 °C.
FM File J.I.3000590
CE Certifications
Compliant for all applicable directives
Maximum Peak Transient Voltage
600V ‡
Maximum Current (per circuit)
2 A (except relays)§
Maximum Current (per module)
12 A (except relays)³§
Wire Range (Rated Cross Section) 9
#22...12 AWG (0.2...4 mm2)
Wire Strip Length
0.32 in. (8 mm)
Recommended Terminal Block Screw Tightening Torque
3.5...4.5 lb•in (0.36....0.50 N•m)
4
5
Agency Certification Modules
Operating Temperature Range
0...+60 °C
Storage Temperature Cables
-20...+80 °C
Storage Tmerpature Modules
-40...+85 °C
Operating Humidity
5…95% non-condensing
Pollution Degree
27
Max. AWG
#22
#20
#18
#16
#14
#12
Max. No. of Wires per
Terminal 9
3
3
3
2
1
1
³ Cat. Nos. 1492-IFM40F-F24AD-4 and 1492-IFM40F-F24D-2 are rated at 8 A.
6
9 Maximum number of the same gauge stranded copper conductors allowed per wire funnel.
7 Pollution Degree 2 is an environment where normally only non-conductive pollution occurs, except for occasional temporary conductivity caused by
condensation shall be expected.
‡ For transients >600V, use UL Recognized suppression device rated at 2.5 kV withstand.
§ For relay contact ratings, refer to Publication 1492-TD008x or Industrial Controls catalog Interposing/Isolation Relays, Bul. Nos. 700-HK36Z24 (24V) or 700HD36A1 (120V), pages 9-40.
7
8
9
10
11
12
13
Visit our website: www.ab.com/catalogs
12-158
Preferred availability cat. nos. are printed in bold
Download PDF