oppertech
Page 1
Listening to music
Wireless Bluetooth Speaker
Wallaby
Start playback on the Bluetooth device, and adjust the volume.
Set the volume at an appropriate level on the connected device,
and adjust the volume with the VOL –/+ buttons on the unit.
To switch to the previous or next song simply press the Previous and
Next button on the speaker. This will switch to the previous/next
song in the playlist of the Bluetooth device. Press the Play/Pause
button on the speaker to start or pause songs.
Making a call/Receiving a call
You can use the Wallaby as a portable speakerphone for incoming
calls when connected wirelessly via Bluetooth. To answer a call, press
the TALK button and talk as you would with your device if it was on
“speakerphone” The built in microphone will pick up your voice just
like a phone. To end a call, press the TALK button again. To refuse a
call, double press the TALK button . You can re-dial the last number
called by double pressing the TALK button
Instruction manual
Quick Start Guide
Speaker overview: top
Play/Pause/Talk/Siri
+
Previous track
-
Next track
Using SIRI
Sube el volumen
Bajar el volumen
NFC
Speaker overview: back
Charging LED
indicator
Line-in audio jack
On/Off switch
Line-out audio jack
When the speaker is connected to an iPhone/iPad via Bluetooth,
press and hold the TALK button for 3 seconds to activate the Siri
function on iPhone/iPad. Then talk to the speaker after hearing the
“Siri ” sound. Please note that iPhone/iPad may not be able to
recognize human speech when the speaker is being used in a noisy
environment. Siri may not work if iPhone/iPad is not connected to
the internet. When the Siri conversation is finished, the speaker will
continue playing audio.
AUX input
ON OFF
Speaker overview: front
IN
OUT
Line out
Micro USB charging port
Audio output of the speaker can be used to connect to an alternate
audio system by plugging the audio cable into the “OUT” jack on the
speaker to the “line in” of the audio playback device of your choice.
Bluetooth LED indicator
Coppertech
Speaker 1
Speaker 2
Charging your speaker
To play audio using the audio cable, plug the cable from the audio
device to the “IN” jack on the back of the speaker.
Battery status on iPhone et iPad
When the speaker is connected to iPhone/iPad via Bluetooth, the
battery status of the speaker can be displayed on the top of the
iPhone/iPad screen, after the Bluetooth symbol. Please note that the
battery status icon can be vertical or horizontal, depending on the
Bluetooth device and its operation system.
To obtain optimum power capacity, the speaker should be charged
using the provided USB cable in your packaging box. To charge the
unit plug the USB cable to the USB port on the back of the speaker.
Charging starts when the unit that is turned off is connected and the Bluetooth compliant............................................Bluetooth 3.0
charging LED indicator lights up in red. Charging is completed in
Dimensions.............................................................5,1 cm x 16,3 cm x 7,1cm
about 4-5 hours and the indicator goes off.
Weight.......................................................................0,450 kg
Technical specifications
Connecting with a Bluetooth device
Speaker driver........................................................stereo, 40MM, 4Ohm
Speaker output......................................................5W*2
Turn on yourspeaker by switching the button on the back of the
Operating Frequency Range............................2.4GHz-2.48GHz
unit to "On", the LED lights should alternate between shining red and
Battery capacity....................................................1800mAh
blue. This signal means that the speaker is in "pairing mode”.
Battery life ..............................................................Up to 10 hours(depending
Perform the pairing procedure on the Bluetooth device to detect this
on the volume and audio content)
speaker. When a list of detected devices appears on the display of the
Battery charging time..........................................4-5 hours
Bluetooth device, select “WS707B”. Once paired successfully, the
Operating temperatures....................................0ºC to 45ºC
Bluetooth LED indicator lights will turn blue and blink twice every
Bluetooth transmission distance....................Up to 10 meters, measured
3 seconds.
in open space. Walls and structures may affect range of device.
Battery Charging voltage..................................5V(1A)
Connecting with a smartphone by Onetouch (NFC)
Working voltage...................................................3.3--5V
If using a device that is NFC (Near Field Communication) enabled,
turn on NFC, then simply touch the speaker on the right side where Frequency Response..........................................100Hz-20KHz
Interface..................................................................Bluetooth, 3.5MM audio
the NFC chip lies to make a connection.
line-in & line-out jack, Micro USB charging port
2014.Coppertech All rights resrved N°4132945 www.coppertech.fr contact@coppertech.fr 231 rue Saint-Honoré 75001 Paris France
oppertech
Important safety information
Please read these instructions and follow these instructions. Heed all warnings.
WARNINGS:
Page 2
Warranty
12 month from the date of purchase.
Covers manufacturing defects.
For waranty service contact: contact@coppertech.fr
• To reduce the risk of fire or electrical shock, do not expose the
product to rain or moisture.
• Do not expose this apparatus to dripping or splashing, and do
not place objects filled with liquids, such as vases, on or near the
apparatus. As with any electronic products, use care not to spill
- Coppertech® Bluetooth Wallaby Speaker
liquids into any part of the system. Liquids can cause a failure
- USB charging cable
and/or a fire hazard.
- 3.5mm audio cable
• Do not place any naked flame sources, such as lighted candles,
on or near the apparatus.
• The apparatus not be exposed to excessive heat such as sunshine,
This product is in compliance with essential requirements
fire or the like.
and other relevant prosions of Directive 1999/5. The complete
• Do not dismantle, open or shred the apparatus.
Declaration of Conformity is available at contact@coppertech.fr
• Do not subject battery pack to mechanical shock.
• In the event of a leaking, do not allow the liquid to come in
contact with the skin or eyes. If contact has been made, wash the
affected area with copious amounts of water and seek medical
advice.
• The battery pack gives its best performance when it is operated at
normal room temperature (20°C +/- 5°C).
• The speaker needs to be charged before use. Always use the correct
charger and refer to the manufacturer’s instructions or equipment
manual for proper charging instructions.
• Keep battery pack out of the reach of children.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
• Only use attachments/accessories specified by the manufacturer.
• Unplug this apparatus during lightning storms or when unused
for long periods of time.
The package includes:
2014.Coppertech All rights resrved N°4132945 www.coppertech.fr contact@coppertech.fr 231 rue Saint-Honoré 75001 Paris France
Download PDF