Push Button Circuit Breaker
Line-R™
Automatic Voltage Regulator
Models LE600I and LE1200I
Thank you for purchasing APC by Schneider Electric’s Line-R Automatic Voltage
Regulator! Fill out and mail the product warranty registration form, or fill out an online
form at www.apc.com.
The Line-R provides a push button circuit breaker on the rear panel of the unit to protect it from
being overloaded. If the circuit breaker “trips”, unplug the last device connected to the unit and
push the circuit breaker fully inward.
Installation
• Placement - Install the Line-R in a protected environment free of excessive dust,
mechanical vibration, inflammable gases and explosive or corrosive atmospheres.
The Line-R automatically corrects brownouts (by boosting low voltage) and overvoltages (by
stepping down high voltage) from the power utility service to levels that are safe for computers,
as well as other sensitive equipment. APC by Schneider Electric’s Line-R provides the highest
degree of protection from line voltage sags and swells, and has been designed for many years of
reliable, maintenance-free service.
Applications
Schneider Electric IT (SEIT) warrants its products to be free from defects in materials and
workmanship for a period of two (2) years from the date of purchase. Its obligation under this
warranty is limited to repairing or replacing, at its sole option, any such defective products. To
obtain service under warranty you must obtain a Return Material Authorization (RMA)
number from SEIT or a SEIT service center. Products must be returned to SEIT or an SEIT
service center with transportation charges prepaid and must be accompanied by a brief
description of the problem encountered and proof of date and place of purchase. This warranty
does not apply to equipment which has been damaged by accident, negligence, or
misapplication or has been altered or modified in any way. This warranty applies to the
original purchaser who must have proper registered the product within 10 days of purchase.
EXCEPT AS PROVIDED HEREIN, SEIT MAKES NO WARRANTIES, EXPRESSED OR
IMPLIED, INCLUDING WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A
PARTICULAR PURPOSE. Some countries do not permit limitation or exclusion of implied
warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the
purchaser.
Do not block the top or side air vents on the unit. Allow 1 inch (2.5 cm) minimum vent
clearance.
NOTICE
Limited Warranty
RISK OF EQUIPMENT DAMAGE
2.5 cm
(1 inch)
The total power consumption of all equipment plugged into the Line-R must not exceed the
ratings listed in the Specifications table below. A total load in excess of the listed ratings will
cause the push button circuit breaker to “trip”.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT SHALL SEIT BE LIABLE FOR
DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE. Specifically, SEIT is not liable for any costs, such as
lost profits or revenue, loss of equipment, loss of use of equipment, loss of software, loss of
data, costs of substitutes, claims by third parties, or otherwise. This warranty gives you
specific legal rights and you may also have other rights which may vary from location to
location.
Failure to follow these instructions can result in equipment damage.
The Line-R is designed for use with voltage sensitive equipment such as a: computer, monitor,
inkjet printer, scanner or fax. It is also designed for use with home electronics (TVs, stereos,
CD players, etc.).
Appliances not suitable for use with the Line-R are items such as refrigerators, freezers, power
tools, air conditioners, dehumidifiers, blenders, or any device that employs an AC motor for
operation. Not for use with life sustaining equipment and any device with a power requirement
exceeding the “Maximum Output Power Capacity” rating listed in the Specifications table.
Features
Lights when input voltage is high.
• Select Input Voltage - The Line-R provides a three-position User Selectable Voltage
Switch for adjusting the input voltage for the region where it is being used (example: Russia
- 220V, Denmark - 230V, United Kingdom - 240V). Slide the switch to select the proper
voltage for your location.
APC by Schneider Electric IT Customer Support Worldwide
For country specific customer support, go to the APC by Schneider Electric Web site, www.apc.com.
• Plug the Line-R into the Wall Outlet - Detach your computer's power cord from the
back of your computer and use it to plug the Line-R into the wall socket. Use one of the two
power cords supplied with the Line-R to reconnect your computer to any of the four outlets
on the back of the Line-R. The Line-R should only be used in buildings having proper
grounding on a branch circuit protected by a fuse or circuit breaker.
• Connect Your Equipment - Plug equipment into the Line-R rear-panel outlets and switch
the equipment ON. The equipment will not be powered until the Line-R is switched ON.
• Switch ON the Line-R - Press the front panel power switch to the on (l) position. This switch
Flashes when input voltage is above rated Input
Voltage Range.
may be used as the master switch for the device and all equipment connected to it.
Input voltage is normal.
Specifications
Lights when input voltage is low.
Characteristics
Maximum Output Power Capacity
Flashes when input voltage is below rated Input
Voltage Range.
The power switch applies and removes power to/
from the Line-R (l = on) / (O = off).
Nominal Output Voltage
Power Switch
Nominal Input Current
Acceptable Voltage Range Tolerance
Model LE600I
Model LE1200I
600 W or 600 VA
1200 W or 1200 VA
220, 230, or 240V (User Selectable)
2.6 A
5.2 A
160 - 270V (Selector Switch set to 220V)
166 - 280V (Selector Switch set to 230V)
Connect the Supplied Power
Cord from any Outlet to Your
Device
AC Outlets (4)
Connect Your
Detachable Device
Power Cord Here and to
an AC Wall Outlet
(connect equipment here)
170 - 290V (Selector Switch set to 240V)
Rated Input Voltage
Nominal Frequency
(see Select Input Voltage)
Number of Outlets
The Line-R provides a front panel power switch (l = on) / (O = off) which functions as the
master power switch for the Line-R and all devices connected to the device.
±10%
Response Time
Efficiency
Power Switch
300 Joules
Output Regulation
Voltage Switch
Circuit Breaker
300V
Surge Energy
User Selectable
Push Button
250Vac
Maximum Acceptable Input Voltage
Operating Temperature
Relative Humidity
Dimensions
Weight
< 2 AC Cycles
>92%
47 - 63 Hz
4
32 - 104°F (0 - 40°C)
0 - 95% Non-condensing
4.6 x 8.4 x 5.5 inches (118 x 214 x 141 mm)
3.1 kg (6.8 lb)
4.2 kg (9.2 lb)
© 2014 APC by Schneider Electric. APC, the APC logo, SurgeArrest and Line-R are owned by Schneider
Electric Industries S.A.S., or their affiliated companies. All other trademarks are property of their respective
owners.
EN 990-1287B
03/2014
Download PDF