Multimedia Distribution and Switching Solutions for

©2016 Silora R&D. All rights reserved. Specifications subject to change. V1.0
Multimedia Distribution
and Switching Solutions
for Healthcare
Contact us to learn more at
info@silrd.com
or visit our website at
www.silrd.com
Technology is taking healthcare and medical devices to a new era, combining ease of use, cost
efficiency and safety with the highest patient care levels. Cutting edge equipment is expanding
the capabilities a hospital or clinic has to offer its staff and its patients.
Silora R&D multimedia distribution and switching solutions enable healthcare institutions to
display diverse information exactly when and where it is needed. Whether it be an operating
“theatre” or cross-room monitoring, staff training or any medically required transmission of video,
audio and various multimedia.
Medical Grade Signal Isolators
Silora R&D provides a proprietary set of galvanic isolators that include signal extenders and splitters,
and which are compliant with patient electrical safety regulations. With our SRD MED series of
products, video signals can be easily distributed covering significant distances through campus's
infrastructure delivering high quality of sound and vision with zero latency.
In the complex setting of a hospital there are many barriers to overcome: cross-platform media
transmission, splitting signals across different protocol displays, construction barriers, distance and
much more. SRD MED products can divert AV from multiple sources and are interoperable with a
wide variety of protocols and cable types. The platform helps you integrate new technologies with
legacy equipment.
iGETH11 – LAN to LAN Isolator
iUSB12 – USB2.0 Isolator, 2 Port Hub
Technical Specifications
Silora R&D solutions enable distribution of information from varied sources to various screens.
Whether a healthcare institution or a medical device provider, by combining our galvanic
isolators and medical grade matrixes, you can create the multimedia distributing and switching
solution you require at the right budget.
Our products provide our customers with choices. With our cutting edge and versatile solutions,
we, together with our customers, are making these choices come through.
iDVI11 – DVI to DVI
Isolator
iDVI12 – Isolated DVI
Splitter over DVI cables
iDVIex11 - Isolated DVI
extender
iVGA12 - Isolated VGA
Splitter over DVI cables
Technical Specifications
Description
iDVI11
iDVI12
iDVIex11
iVGA12
DVI to DVI isolator
Isolated DVI splitter over
DVI Cables
Isolated DVI extender over
CAT6 Cable
Isolated VGA Splitter over DVI
cables
4KV between VGA output and
main’s lines
2.5KV between interfaces/AC line
input and main’s earth
Galvanic isolation
5KV
5KV
5KV
Resolutions
Up-to 1920x1200 (WUXGA)
Up-to 1920x1200 (WUXGA)
Up-to 1920x1200 (WUXGA) Up-to 1024x768 (XGA)
Signal Swing
150 - 800 mv p-p
150 - 800 mv p-p
150 - 800 mv p-p
VGA standard (0.7 Volts p-p)
EDID
EDID & HPD pass through
EDID & HPD pass through
EDID & HPD pass through
Local EDID (optional)
Max Pixel Clock
165MHz
165MHz
165MHz
165MHz
VGA – HD15, female
Input Connectors
DVI, female
DVI, female
Tx: DVI, female
Rx: RJ-45, female
Isolated USB2.0, 2 port hub
Output Connectors
DVI, female
2 DVI, female
Tx: RJ-45, female
Rx: DVI, female
2 DVI-I female (adaptors required)
5KV
5KV (data & power)
Output Drive
6ft /1.8 meters
6ft /1.8 meters
200ft / 60 meters
100ft / 30 meters
Signal Swing
± 2.5 Volts
0 – 3.6 Volts p-p
Max data rate
1 Gbps
USB 2.0 full-speed up-to 12Mbps
Power Supply
100 - 240 VAC, (± 10%)
RJ-45
1 Upstream Type B
5V DC, 2 Amp, medical
grade, via locking
connector
100 VAC-240 VAC (+/- 10%),
~0.05A-0.1A
Input Connectors
5V DC, 2 Amp, medical
grade, via locking
connector
Output Connectors
RJ-45
2 Downstream Type A
Input video signal
DVI over TMDS
DVI over TMDS
DVI over TMDS
0.7 Volts p-p (VGA standard)
Output Drive
328ft/ 100meters
6ft /1.8 meters
Input Sync Signal
H/V sync
encoded in TMDS
H/V sync encoded in
TMDS
H/V sync
encoded in TMDS
Horizontal & Vertical (VGA
standard)
Power Supply
No external supply is required
5V DC,
1 Amp max,
500mA max supply current per channel
Operation Temp
0°c to 45°c
0°c to 45°c
0°c to 45°c
0°c to 45°c
Storage
-10°c to 70°c
Humidity: 5-95% RH noncondensing
-10°c to 70°c
Humidity: 5-95% RH noncondensing
-10°c to 70°c
Humidity: 5-95% RH noncondensing
-10°c to 70°c
Humidity: 5-95% RH noncondensing
Compliance
IEC60601-1
IEC60601-1-2
3rd Edition
RoHS, WEEE
IEC60601-1
RoHS, WEEE
IEC60601-1
IEC60601-1-2
3rd Edition
RoHS, WEEE
IEC60601-1
RoHS, WEEE
Additional features
Grounding terminal
Grounding terminal
DDC signal – 5 Volts p-p
-3dB Video amplifier bandwidth
> 18 MHz
Dimensions
5.7”x1.2”x3.3”
(145.7x 29.5x 84.8mm)
8.4”x1.6”x6.8”
(213.5x 42x172.9mm)
5.7”x1.2”x3.3”
(145.7x 29.5x84.8mm)
8.4"x1.6"x6.8"
(213.5x42x172.9mm)
Shipping weight
1.8lbs. (0.8 kg)
3lbs. (1.34 kg)
2.9lbs. (1.3 kg)
5.9lbs. (2.66 Kg)
iGETH11
iUSB12
Description
LAN to LAN isolator
Galvanic isolation
Operation Temp
0°c to 45°c
0°c to 45°c
Input Sync Signal
H/V sync
encoded in TMDS
500mA max supply current per channel
Storage conditions
-10°c to 70°c
Humidity:
5-95% RH non-condensing
-10°c to 70°c
Humidity:
5-95% RH non-condensing
Compliance
IEC60601-1
RoHS, WEEE
IEEE802.3
IEC60601-1
RoHS, WEEE
Dimensions
2.6"x1.1"x2.6" (66x27x66mm)
2.6"x1.1"x2.6" (66x27x66mm)
Shipping weight
0.44lbs (200 gr)
0.44lbs (200 gr)
Download PDF