Technical specifications of VHF Repeater Unit

Technical Specifications for VHF Repeater unit
Operating Voltage - 12 V DC
Frequency - All permitted marine channels having two frequencies as well as non marine channels.
Transmitter Out put power - minimum 45 W
Receiver Audio out put: 3 - 4.5W (Fist mike with speaker facility)
Capability Expansion – be expanded through the addittion of special options:
Community Repeater Capability – lets multiple groups share the same radio channel.
Telephone Interconnect – lets radio users access a local landline tele-phone network,
further expanding the communications reach.
Smar Trunk IITM Trunking – provides faster access to channels, security, privacy, and
telephone access.
Metal Housing with Temperature Controlled Fan Assembly
Mounting Bracket
Interconnection Cables
Service Manual
Power Supply with Switchable Primary Voltage
Programmable Dip Switch
Hang Time 0, 1.5 or 3 seconds
Audio Path Capability
Bi-Directional or Uni-Directional Operation
Front Panel “Repeater Enable Control”
Variable level Repeat Audio Path
Compatible with RapidCall Signalling
2 PRO Series Mobile Radios
Duplexer
Note: The cost shall include charges for erection, installation and programming.
Technical Specifications for VHF Base Station
Operating Voltage - 12 V DC
Squelch control
Frequency - All permitted marine channels as well as non - marine channels
Transmitter Out put power - 25 W (High) and 1W (Low) selectable
Receiver Audio out put: 3 - 4.5W (Fist mike with speaker facility)
Note: The cost shall include charges for erection, installation and programming.
Download PDF