IRtec Rayomatic USB 2.2

IRtec Rayomatic USB 2.2
Rayomatic USB 2.2 non-contact infrared sensors measure temperatures from 45°C
to 2000°C. The 4-20 mA or 0-20 mA output is compatible with almost any indicator,
controller, recorder, data logger etc., without the need for special interfacing or
signal conditioning.
They are especially suited to low-emissivity targets such as steel rollers and other
metal surfaces, even at low temperatures.
Fully configurable by PC, Rayomatic USB 2.2 is supplied with IRConfig software
and USB cable. The emissivity and range can be set with the software or adjusted
by OPC client.
The sensor can be either connected with the 4-20 mA cable, the USB cable or both.

Range from 45°C to 2000°C

2.0 to 2.4 µm


Selectable 2-wire 4-20 mA or
0-20 mA output
Temperature range, emissivity
setting… configurable by PC
via IRConfig software and
USB cable

Emissivity from 0.1 to 1.0

15:1, 25:1, 75:1 and CF optics

OPC server capabilities




Data acquisition, alarms and
scrolling graphical display
IP65 stainless steel housing
Optional air/water
cooled
housing, air purge collar, laser
sighting tool, dual laser
sighting bracket, mounting
brackets…
AOIP SAS
50-52 Avenue Paul Langevin
F-91130 Ris Orangis
Tel: +33 (0)169 028 900 – Fax: +33 (0)169 020 599
Email: export@aoip.com
www.aoip.fr
Edited in October 2014 – Non-contractual document, subject to change without prior notice.
2.2 µm process infrared thermometer
with 4-20 mA output and USB communication
IRtec Rayomatic USB 2.2
Output connection
- 4-20 mA output
- 4-20 mA output and/or USB output
- USB output
Optics
Technical specifications
LT: 45°C – 300°C
PT: 100°C – 400°C
Range
MT: 250 – 1000°C
HT: 450°C – 2000°C
Optics
15:1, 25:1, 75:1, CF
Outputs
Selectable linear 4-20 or 0-20 mA
Configuration
Via PC through USB connection
Accuracy
±1% RDG or 1°C
Repeatability
±0.5% RDG or 0.5°C
Emissivity
Adjustable from 0.1 to 1.0
Response time
240 ms (90%)
Spectral band
2.0 – 2.4 µm
Supply voltage
24 VDC (Max 26 VDC)
Sensor voltage
Min 11 VDC
Loop impedance
900 Ω Max
Construction
Stainless steel
Dimensions
Ø 25 x 106.5 mm
Thread mouting
M20 x 1 mm
Weight with cable
175 g
Cable length
4-20 mA output: 1 m / USB: 1 m
(further lengths in option)
Environmental rating IP65
Working temperature 0 to 70°C
Relative humidity
95% non-condensing
IRtec Rayomatic USB 2.2
Accessoires
Code de commande
USB-AA-BB-2.2-CC-D/MAN
Delivered in standard with IRConfig software, USB cable, output
cable, instruction manual in English
FBL Fixed mounting bracket
ABL Adjustable mounting bracket
LSTL Laser sighting tool
Table AA
15
25
75
CF
Optics – Distance to target
Optics 15:1, 100 mm @ 1500 mm (LT & PT only)
Optics 25:1, 60 mm @ 1500 mm (MT & HT only)
Optics 75:1, 20 mm @ 1500 mm (MT & HT only)
Close focus lens, 7.55 mm @ 500 mm (MT & HT only)
Table BB
LT
PT
MT
HT
Temperature range
45°C – 300°C (optics 15:1 only)
100°C – 400°C (optics 15:1 only)
250 – 1000°C
450°C – 2000°C
Table CC
NO
WJ
Accessories
None
Air / Water cooled jacket and air purge collar
Table D
0
1
Calibration certificate
None
Factory traceable calibration certificate with data
DLSBFL Dual laser sighting bracket, fixed
DLSBAL Dual laser sighting bracket, adjustable
DLSBCE Extended cable - 1 m
APSL Air purge collar
Extended cable, up to 29 m extension
PU2.2CE For 4-20 mA output - 1 m
WJ Air / Water cooled jacket + air purge collar
Download PDF