RM1000 CSI Specification

Salient Systems PowerChoice LP Video Server Specification
Salient Systems
10801 N Mopac Expy, Bldg 3, Ste 700
Austin, Texas 78759
512-617-4800
512-617-4801 FAX
www.salientsys.com
July, 2016
Product Guide Specification
Specifier Notes: This product guide specification is written according to the Construction
Specifications Institute (CSI) 3-Part Format, based on MasterFormat 2004 and The Project
Resource Manual—CSI Manual of Practice. The Manufacturer is responsible for technical
accuracy. By removing the references to specific Salient Systems product names or part numbers,
the text may also be used also in performance-based specifications.
The section must be carefully reviewed and edited by the Architect or Engineer to meet the
requirements of the project and local building code. Italicized Words and sentences within
brackets [ ] are choices to include or exclude a particular item or statement. Coordinate this
section with other specification sections and the Drawings.
Section 28 23 23
Video Surveillance Systems Infrastructure
PART 1 – GENERAL
1.1
SUMMARY
A. Section Includes
1. Video surveillance servers.
B. Related Sections
1. Section 28 23 13 – Video Surveillance Control and Management
Systems.
2. Section 28 23 16 – Video Surveillance Monitoring and Supervisory
Interfaces.
3. Section 28 23 19 – Digital Video Recorders and Analog Recording
Devices.
4. Section 28 23 29 – Video Surveillance Remote Devices and
Sensors
Project Name/Project Number
28 23 23 - 1
Video Surveillance Control and
Management Systems
Salient Systems PowerChoice LP Video Server Specification
1.2
REFERENCES
A. Underwriters Laboratories, Inc. (UL) (www.ul.com)
1. UL 50 Enclosures for Electrical Equipment.
2. UL 60950-1 Information Technology Equipment - Safety.
1.3
SUBMITTALS
A. Submit under provisions of Section [01 33 00].
B. Product Data:
1. Manufacturer’s data, user and installation manuals
for all equipment and software programs including
computer equipment and other equipment required
for a complete VMS.
C. Shop Drawings
1. System device locations on architectural floor plans.
2. Full Schematic of system including wiring information for all devices.
D. Closeout Submittals
1. User Manuals
2. Parts list.
3. System device locations on architectural floor plans.
4. Wiring and connection diagrams.
5. Maintenance requirements.
1.4
QUALITY ASSURANCE
A. Manufacturer shall have a minimum of 10 years experience in the
manufacture and design of VMS products.
B. Installer:
1. Minimum of 5 years experience installing VMS products.
2. All installation, configuration, setup, program and related work
shall be performed by technicians thoroughly trained by the
manufacturer in the installation and service of the equipment
provided.
Project Name/Project Number
28 23 23 - 2
Video Surveillance Control and
Management Systems
Salient Systems PowerChoice LP Video Server Specification
1.5
DELIVERY, STORAGE AND HANDLING
A. Comply with requirements of Section [01 60 00].
B. Deliver materials in manufacture’s original, unopened, undamaged
containers with original identification labels.
C. Protect stored materials from environmental and temperature
conditions following the manufacturer’s instructions.
D. Handle and operate products and systems according to
manufacturer’s instructions.
1.6
WARRANTY
A. Provide manufacturer’s warranty covering three (3) years for
replacement and repair of defective equipment.
1.7
MAINTENANCE
A. Make ordering of new equipment for expansions, replacements and
spare parts available.
B. Provide factory direct technical support to the installing firm.
PART 2 – PRODUCTS
2.1 VIDEO SERVER
A. Manufacturer:
The Video Server shall be the PowerChoice LP as
supplied by: Salient Systems Corporation
10801 N Mopac Expy, Bldg 3, Ste 700
Austin, Texas 78759
512-617-4800
512-617-4801 FAX
www.salientsys.com
B. Substitutions:
Under the provisions of Division 1:
1. All proposed substitutions must be approved by the Consultant or
Architect/Engineer professional.
2. Proposed substitutions must provide a line-by-line compliance
document.
Project Name/Project Number
28 23 23 - 3
Video Surveillance Control and
Management Systems
Salient Systems PowerChoice LP Video Server Specification
C. General Server Features:
1. The video server shall be integrated into a workstation-class
computing platform (‘PC’). The PC shall be available in a rackmount chassis and shall fit in an EIA-standard 19” equipment rack
utilizing no more than one unit (1U) of rack space.
2. The server Operating System shall be Microsoft Windows 7
Professional.
3. Server shall have a lockable front bezel.
5. Server shall have front accessible USB ports.
6. Server shall have shock resistant disk drive bays.
D. Server System Components:
1. The server shall meet or exceed the following system component
specifications:
a. Server shall utilize an Intel C222 chipset based
motherboard.
b. Server shall utilize Intel Core i3-4150
c. Server shall have at least 4GB of system memory
d. Server Storage Controller shall be SATA (serial ATA) ports –
JBOD
e. Server hard drives shall be Surveillance Class
f. Server shall provide between 1.0TB and 12.0TB of internal
storage for video event data
g. Server shall have as the network controller Dual Gigabit
(10/100/1000 Mbits/sec) Ethernet Controller.
h. Server shall have USB 2.0 and USB 3.0 High-Speed
serial ports, for the attachment of external storage, digital
I/O and archive devices.
2. The server shall provide the following optional components:
a. Using analog frame grabber technology, the DVMS shall be
capable of supporting between zero (0) and thirty two (32)
NTSC or PAL video sources, in increments of four (4) video
sources.
b. Using digital video capture technology, the DVMS shall be
capable of supporting IP-based video sources, in increments
of one (1) video source.
c. The DVMS server shall support the following “Compression
Formats” for analog video sources (NTSC or PAL):
1. MJPEG
2. MPEG4
3. H.264
Project Name/Project Number
28 23 23 - 4
Video Surveillance Control and
Management Systems
Salient Systems PowerChoice LP Video Server Specification
d. The video frame grabber expansion board shall utilize a
separate video decoder for each video source, allowing for
fully independent control of the following for each source:
1. Brightness;
2. Contrast;
3. Hue;
4. Saturation;
5. Chroma.
e. The server shall optionally provide support for between
sixteen (16) and sixty-four (64) digital input and output
points for wired integration with access control, building
automation equipment, sensors, monitors, or other
application requirements that may be determined at a later
time. The server shall support any combination of the
following digital input and output devices that are physically
connected to the server via the PC’s USB bus:
1. 16in + 16 out – 16 optically isolated digital inputs
and 16 reed-relay outputs.
3. The server shall support capture of video from cameras:
a. Server shall support any analog camera, NTSC or PAL,
directly connected to optional analog frame grabber
expansion board.
b. Server shall support IP cameras from leading camera
manufacturers, with these video feeds connected through
the server network controller without the need for encoders
or other devices:
1. ACTi
2. American Dynamics
3. Appro
4. Arecont Vision
5. Axis
6. Basler
7. Bosch
8. Canon
9. IQinVision
10. Lumenera
11. Panasonic
12. Pelco
13. Samsung
14. SmarterCam
Project Name/Project Number
28 23 23 - 5
Video Surveillance Control and
Management Systems
Salient Systems PowerChoice LP Video Server Specification
15. Sony
16. Toshiba
c. Server shall support control of PTZ camera (analog or IP)
from leading camera manufacturers:
1. ACTi
2. American Dynamics ASCII
3. Axis
4. Bosch
5. Canon VCC-4
6. Kalatel
7. Panasonic: conventional and new (analog)
8. Panasonic IP
9. Pelco: ASCII, D, P (analog)
10. Pelco IP
11. Philips BiPhase
12. RVision
13. SAE
14. Samsung
15. Sensormatic
16. Sony EVI –D30/D31
17. Sony P5 IP
18. Sony Visca IP
19. Toshiba IK-WB IP
20. Toshiba IK-WB21A IP
21. Ultrak
22. VCL
23. Vicon
E. Chassis Features:
1. The From Factor shall be 1U.
2. The dimensions shall be 1.66” x 17.09” x 15.52”
3. Back ports shall be 2x USB 3.0.
F. Electrical:
1. Input Voltage:
AC 100-240V 50-60Hz.
2. Power Supply:
250W AC-DC,
G. Environmental:
1. Temperature Range:
a. Operating: 50 to 95 degrees F (10 to 35 degrees C)
b. Storage: -40 to 140 degrees F (-40 to 65 C)
2. Relative Humidity Range:
a. Operating 10 – 80% (non condensing at ambient)
b. Non-operating 5-95% (non-condensing at ambient)
Project Name/Project Number
28 23 23 - 6
Video Surveillance Control and
Management Systems
Salient Systems PowerChoice LP Video Server Specification
PART 3 – EXECUTION
3.1 EXAMINATION
A. Examine area to receive devices and notify any adverse conditions
affecting installation or subsequent operation.
B. Do not begin installation until unacceptable conditions are corrected.
3.2 PREPARATION
A. Protect devices from damage during construction.
3.3 INSTALLATION
A. Install devices in accordance with manufacturer’s instruction at locations
indicated on the floor drawing plans.
B. Perform installation with qualified service personnel.
C. Install devices in accordance with the National Electrical Code or
applicable local codes.
C. Ensure selected location is secure and offers protection from accidental
damage.
3.4 FIELD QUALITY CONTROL
A. Test snugness of mounting screws of all installed equipment.
B. Test proper operation of all VMS devices.
C. Determine and report all problems to the manufacturer’s customer
service department.
3.5 ADJUSTING
A. Make proper adjustment to video system devices for correct operation in
accordance with manufacturer’s instructions.
3.6 DEMONSTRATION
A. Demonstrate at final inspection that the VMS is functioning properly.
END OF SECTION
Project Name/Project Number
28 23 23 - 7
Video Surveillance Control and
Management Systems
Download PDF