LevelOne 11a Wireless Antenna Splitter Datasheet

FreeCon_WAS-4002

one world_one brand_one level_

11a Wireless Antenna Splitter

LevelOne’s WAS-4002 is a two-port antenna splitter that enables you to operate one radio with two antennas in the 5.8 GHz frequency band.

With the state of the art micropstrip technology using Wilkinson circuit topology, this device provides the perfect solution to split two antennas and point them in two different directions and still maintain proper gain and impedance. This splitter is suitable for omni-directional or directional antennas or a combination thereof.

The WAS-4002 is optimized for maximum performance. There is only

0.7 dB insertion loss over theoretical 3dB loss found in 2-port splitter.

No power supply is required for operation of this device.

WAS-4002

Related Products

WAN-4220

11a 22dBi Oudoor Grid Antenna

WAN-4230

11a 23dBi Oudoor Patch Antenna

Key Features

Waterproof enclosure

Works equally well for both transmit and receive signals

Covers the entire 5.8 GHz band

Only 0.7 dB insertion loss over theoretical

3dB loss found in 2 port splitter

Standard N-female connectors

Supports up to 2 Watt transmitter power

Passes DC through it to enable dual amplifiers

Extremely reliable strip line matching

Suitable for Omni of directional antennas or a combination thereof

Provides isolation between the output ports

Product Diagram

Technical Specification

Standard

IEEE 802.11a

Frequency Range

5.8GHz

Impedance

50 Ohm

Insertion loss (dB)

> .7 dB

VSWR

<1.5: 1

Connector Type

N-female

Power Input

25 Watt (max.)

Temperature

Operating:-20ﾟ~+50ﾟC

Dimensions (mm)

82(L) x 22(W) x 20(H)

Weight

35g

Ordering Information

WAS-4002: 11a Wireless Antenna Splitter

WAS-4002 operates one radio with 2 antennas

For more information, please contact your LevelOne representative, or visit www.level1.com

All technical specifications are subject to change without notice.

All mentioned brand names are registered trademarks and property of their owners