PT790 Ex Intrinsically safe TETRA handheld radio The PT790 Ex is the first TETRA handheld radio worldwide with the highest level of intrinsic safety "ia". Its robust design and its safety functions substantially increase the industrial safety of users in the oil and gas industry, mining industry or fire departments. www.hytera-mobilfunk.com Radio PT790 Ex TETRA handheld radio (ATEX) For many experts two-way radios represent an indispensable tool in their day-to-day work. For those working in environments containing explosive gases, combustible dust, or in the mining industry, safety is of particular importance. The intrinsically safe handheld radio PT790 Ex offers first-class protection for users who are dependent on reliable TETRA radio in such areas exposed to explosions and fire hazards. As the first TETRA radio with the "ia" approval worldwide, the PT790 Ex meets the highest requirements that can be imposed on an intrinsically safe product. Highlights Maximum safety As the first TETRA handheld radio throughout the world with "ia" approval, the PT790 Ex can be used in areas in which an explosive atmosphere containing a mix of air and combustible gases, vapors or mists are permanently present (Zone 0). Robust & reliable The PT790 Ex offers excellent features even under harsh operating conditions. The device is dust-proof and waterproof in accordance with IP67 degree of protection, withstanding submersion in 1 meter of water for a duration of up to 30 minutes. Furthermore, the PT790 Ex meets the requirements of the US MIL - STD - 810 F / G standard. Functions for industrial safety To offer the maximum possible industrial safety, the PT790 Ex features a man down alarm sensor and an adjustable time alarm (lone worker). The standard equipment GNSS module receives positioning data via GPS, GLONASS and Beidou and can transfer these data for further analysis to the control room or an AVL dispatcher. Immediate and direct TETRA communication PT790 Ex provides rapid access to the TETRA radio network and to its services. It meets the regulations of the ETSI TETRA standard and is therefore compatible with infrastructures and terminals from various manufacturers. Versatile functions Besides voice and data communication, the PT790 Ex offers many additional functions: Encryption, programmable keys, etc. Moreover, the handheld radio includes a connection for expansions and accessories. The features marked with * are available in future versions of the PT790 Ex. Encryption features are optional and have to be configured separately. They are also subject to German and European export regulations. Intelligent antenna design: Separate rotary buttons ensure a simple operation Clearly arranged, multilingual menu Ergonomic and lightweight chassis 20 programmable buttons High-strength LCD protective cover The high-strength LCD protective cover is extremely scratch-resistant and would even withstand being struck by a 1-kg hammer. Innovative battery latch The patented lock of the battery ensures that the battery cannot fall out if the radio should be dropped onto a hard surface. Visible "ia" certification The green frame of the display indicates that this is an "ia"-certified handheld radio. Countersunk screws To minimize the possibility of a discharge at the belt clip, the screws for fastening the belt clip are countersunk. If the radio should ever be dropped, the screws will not touch the ground. Anti-slip design The rear part of the battery and both sides of the chassis are equipped with an anti-slip material to prevent the radio from slipping and falling down and to ensure a solid grip. Innovative silicone encapsulation To protect the internal circuits of the PT790 Ex against liquids, dust and gases, they are encapsulated with silicone. Device group: I: Mining II: Other areas with potentially explosive atmospheres (no mining, chemical industry, oil refinery, etc.) II GAS Explosion protection standard: EU ATEX explosion protection directive and IECEx standard ia Ex 1G Explosive atmosphere G: Gases, vapors, mists Zone classification of potentially explosive areas 1: Very high class (Zone 0 | Zone 20) 2: High class (Zone 1 | Zone 21) 3: Regular class (Zone 2 | Zone 22) (no mining, chemical industry, oil refinery, etc.) Zone 0: constant, long-term, frequent Zone 1: occasional Zone 2: short-term IIC T4 Type of protection: ia: Intrinsic safety (Zone 0/1/2) ib: Intrinsic safety (Zone 1/2) DUST Device group: I: Mining II: Other areas with potentially explosive atmospheres (no mining, chemical industry, oil refinery, etc.) II 1D Gas groups: I: Methane IIA: Propane IIB: Ethylene IIC: Hydrogen Explosion protection standard: EU-ATEX explosion protection directive and IECEx-standard Ex Explosive atmosphere D: Dust Zone classification of potentially explosive areas 1: Very high class (Zone 0 | Zone 20) 2: High class (Zone 1 | Zone 21) 3: Normal class (Zone 2 | Zone 22) (no mining, chemical industry, oil refinery, etc.) Zone 0: constant, long-term, frequent Zone 1: occasional Zone 2: short-term ia Gas groups: I: Methane IIA: Propane IIB: Ethylene IIC: Hydrogen IIIC Type of protection: ia: Intrinsic safety (Zone 0/1/2) ib: Intrinsic safety (Zone 1/2) T120 °C Temperature class Temperature classes T1: 450 °C T2: 300 °C T3: 200 °C T4: 135 °C T5: 100 °C T6: 85 °C Dust and water protection class IP6X MINING Device group: I: Mining II: Other areas with potentially explosive atmospheres (no mining, chemical industry, oil refinery, etc.) I M1 Explosion protection standard: EU-ATEX explosion protection directive and IECEx-standard ia Ex Category of device group I: M1: Very high level of safety. Products remain safe even if two independent faults occur. Continued operation must be ensured. M2: High level of safety. Products are intended to be de-energized in the event of an explosive atmosphere. Safety on the highest level Whether on an oil drilling platform, in mining or other potentially high-explosive environments, safe and reliable communication always comes first. With the world's first "ia"-certified TETRA handheld radio, Hytera offers its customers a device that meets this extremely safe requirement profile. "ia" The operating resources employed in the potentially explosive area contain only intrinsically safe circuits. A circuit is considered intrinsically safe if no spark and no thermal effect that occur under defined testing conditions, can cause the ignition of a specific explosive atmosphere. Type of protection: ia: Intrinsic safety (Zone 0/1/2) ib: Intrinsic safety (Zone 1/2) Device groups The device groups are divided into two different areas (I and II). Group I is designated for devices that are being used in mining operations. Group II applies to all areas that could be subject to a potentially explosive atmosphere. Both device groups are again divided into individual categories that define the scope of protection and application area of the devices. Zone classification The zone classification of potentially explosive areas is divided into Zone 0, 1, 2 for gases and 20, 21, 22 for dust. In this context, the zones differ by how often and how long dangerous explosive materials occur. Distinctions are made between: "constant, over long periods of time or frequent" (0|20), "occasional" (1|21) and "none or short-term" (2|22). Functions The PT790 Ex handheld radio was developed in compliance with the open TETRA standard of the European Telecommunications Standards Institute (ETSI). Additional call services Operating mode Security services Trunked radio mode (TMO): Communication via the TETRA radio network (semi-duplex and duplex mode) Direct mode (DMO): Direct communication between the radios (semi-duplex) Callout Gateway call (DMO) / repeater call (DMO) Authentication (by system and mutual) Air interface encryption (TEA1, TEA2 *, TEA3, TEA4) End-to-end encryption (E2EE) by software (AES128 / AES256), by SIM card, encryption of voice and SDS Access control with PIN / PUK code Voice services Group calls TETRA security class 1, 2, 3: non-encrypted, static encryption (SCK), dynamic encryption (CCK/DCK) Group call with defined priority (incl. pre-emptive priority) Key distribution via air interface (OTAR) Dynamic Group Number Assignment (DGNA) Static encryption in the DMO mode (SCK) Broadcast call (group, TMO) Attachment/ deactivation via air interface (Enable / Disable) Talking party indication (TPI) Ambience Listening Late Entry Open group call Group scan with priorities Security functions for the user Emergency button Lone worker function /man-down alarm Individual call Tilt alarm Individual call half-duplex and individual call duplex (TMO) Silent alarm Individual call with defined priority (also pre-emptive priority) Call barring Calling Line Identification Presentation (CLIP) Programmable key lock (individual keys can be excluded from the lock) Configuration protection / configuration password Emergency call TX Inhibit (TXI) Emergency call to selected or pre-defined group Emergency call as individual call and as call to a telephone network (PSTN/PABX) Emergency call microphone & cyclic change of permission to talk during the emergency call Silent alarm (TMO) Data / message services Short data service (SDS) – types 1, 2, 3, 4 and TL Concatenated SDS (Long SDS) and Flash SDS Status message/ text message Notification of new messages during a call Packet data service (packet data, single-slot, multi-slot) Calls to telephone networks (PSTN / PABX) (TMO) PSTN / PABX individual call, full-duplex PSTN / PABX individual call, half-duplex DTMF Calling Line Identification Presentation (CLIP) Java™ platform MIDP 2.0, WAP Functions of the user interface 20 programmable keys for direct access to the individual Functions (shortcut keys) Integrated BT Wireless BT connection to different audio and PTT devices 4-ways navigation key Automatic search and detection of compatible BT devices Separate rotary switches for call groups and audio volume PEI interface Call log: Missed/answered calls, dialed numbers Clock synchronization via GPS / SAT, radio network or local time Flexible dialing (e.g. direct dialing, redialing, dialing lists etc.) Energy saving mode Special microphone Automatic cell re-selection without call interruption (handover) upper microphone for half-duplex calls Programming several selectable network identifications (TMO, DMO) lower microphone for duplex calls Programming several selectable PSTN / PABX gateways Adjustable screen brightness & screensaver Customizable alarm tones Many international languages are already available, installation of Radio User Assignment (RUA) several selectable languages on radio Over The Air Interface (OTAP) Positioning according to ETSI LIP or NMEA protocol Completely integrated GPS/GLONASS/Beidou receiver Completely programmable position updating Display of direction and position of the other call parties Transmission of the position data on emergency call Standard accessories Antenna (GPS integrated) Lithium-ion battery Power adapter (country-specific) Charging station Optional accessories (excerpt) Various ATEX audio accessories 6-unit power supply (for charging stations) PS7002 6-unit charging station MCA10 Leather case Belt clip Hand strap Technical Data Radio characteristics General data Frequency ranges 380 – 430 MHz / 806 – 870 MHz Channel spacing 25 kHz Dimensions (H × W × D) 141 × 55 × 39 mm Transmitting power 1W Weight approx. 515 g (with 1800 mAh battery and antenna) RF power control ± 2 dB Receiver class ETSI EN 392-2 / 396-2 class A Static receiver sensitivity -112 dBm (typical -116 dBm) Dynamic receiver sensitivity -103 dBm (typical -105 dBm) Operating voltage 7.4 V Battery (lithium-ion) 1800 mAh (standard battery) Battery service life (5-5-90 duty cycle) Approx. 14 hours (standard battery) Maximum audio power output > 1,2 W GNSS (GPS / GLONASS / Beidou) Receiving sensitivity ≤ -144 dBm User interface Signal tracking sensitivity ≤ -157 dBm LCD color display 1.8 inch, 160 × 128 pixel, 65,536 colors Precision ≤ 10 m Call groups – TMO 3000 Time to first position recognition (TTFF) cold start < 50 seconds Call groups – DMO 2000 1000 entries Time to first position recognition (TTFF) warm start < 1 second Phone book Group lists – TMO (use for scanning, scan lists) 200 (200 groups per list) Group lists – DMO 50 (200 groups per list) Number of short messages (SDS) (inbox, sent, drafts) 400 / 50 / 50 Number of status messages 200 All technical information was determined at the factory and in accordance with the corresponding standards. Subject to change on the basis of continuous development. The illustrations below are solely for reference. The products themselves may deviate from these representations. Environmental conditions Operating temperature range (in non-hazardous environment) - 30 °C to + 60 °C Operating temperature range (in hazardous environment) - 20 °C to + 55 °C Storage temperature range - 40 °C to + 85 °C Relative humidity ETS 300 019 (95 %) Protection against dust and moisture IEC60529, IP67 Shock and vibration resistance MIL-STD-810 F / G Explosion protection Gas: II 1G Ex ia IIC T4 Dust: II 1D Ex ia IIIC T120 °C IP6x Mine: I M1 Ex ia Your Hytera partner: Further information can be found at: www.hytera-mobilfunk.com Contact us if you are interested in purchasing, sales or application partnerships: firstname.lastname@example.org SGS Certificate DE11/81829313 Hytera Mobilfunk GmbH Encryption features are optional and have to be configured separately; they are also subject to German and European export regulations. Address: Fritz-Hahne-Straße 7, 31848 Bad Münder, Germany Tel.: + 49 (0)5042 / 998-0 Fax: + 49 (0)5042 / 998-105 E-mail: email@example.com | www.hytera-mobilfunk.com are registered trademarks of Hytera Co. Ltd. ACCESSNET® and all derivatives are protected trademarks of Hytera Mobilfunk GmbH. © 2016 Hytera Mobilfunk GmbH. All rights reserved. Ref. No.: 90PT790Ex_Fly_ENG_v02 Hytera Mobilfunk GmbH reserves the right to modify the product design and the specifications. In case of a printing error, Hytera Mobilfunk GmbH does not accept any liability. All specifications are subject to change without notice.