NVMS-7000 Client Software User Manual

NVMS-7000 Client Software
User Manual (V2.0.0)
User Manual of NVMS-7000 v2.0
Contents
Chapter 1 Overview .......................................................................................................................... 3
1.1 Description .......................................................................................................................... 3
1.2 Running Environment.......................................................................................................... 3
1.3 Function Modules ............................................................................................................... 3
1.4 Updates Instruction ............................................................................................................. 6
Chapter 2 Live View........................................................................................................................... 7
2.1 User Registration and Login ................................................................................................ 7
2.2 Adding the Encoding Device................................................................................................ 8
2.2.1 Adding Online Devices ............................................................................................. 8
2.2.2 Adding Devices Manually ....................................................................................... 10
2.2.3 Adding Devices by IP Segment ............................................................................... 10
2.2.4 Adding Devices by IP Server ................................................................................... 11
2.2.5Adding Devices by HiDDNS...................................................................................... 12
2.3 Group Management .......................................................................................................... 13
2.4 Basic Operations in Live View............................................................................................ 15
2.4.1 Starting and Stopping the Live View ...................................................................... 17
2.4.2 Auto-switch in Live View ........................................................................................ 19
2.4.3 PTZ Control in Live View ......................................................................................... 20
2.4.4 Manual Recording and Capture.............................................................................. 22
2.4.5 Instant Playback ..................................................................................................... 25
2.4.6 Other Functions in Live View.................................................................................. 27
Chapter 3 Remote Record Schedule Settings and Playback ............................................................ 28
3.1 Remote Recording ............................................................................................................. 28
3.1.1 Recording on Storage Devices on the DVRs, NVRs, or Network Cameras .............. 28
3.1.2 Recording on Storage Server .................................................................................. 31
3.2 Remote Playback ............................................................................................................... 33
3.2.1 Normal Playback..................................................................................................... 33
3.2.2 Event Playback........................................................................................................ 35
3.2.3 Synchronous Playback ............................................................................................ 36
Chapter 4 Event Management ........................................................................................................ 38
4.1 Configuring Motion Detection Alarm ................................................................................ 38
4.2 Configuring Tampering Alarm ........................................................................................... 41
4.3 Configuring PIR Alarm ....................................................................................................... 42
4.4 Configuring Video Loss Alarm ........................................................................................... 43
4.5 Configuring Alarm Input Linkage ....................................................................................... 44
4.6 Configuring Device Exception Linkage............................................................................... 45
4.7 Viewing Alarm and Event Information .............................................................................. 46
Chapter 5 E-map Management ....................................................................................................... 47
5.1 Adding an E-map ............................................................................................................... 47
5.2 The Hot Spot Function ...................................................................................................... 49
5.2.1 Adding Hot Spots.................................................................................................... 49
5.2.2 Modifying Hot Spots............................................................................................... 50
5.2.3 Previewing Hot Spots ............................................................................................. 51
1
User Manual of NVMS-7000 v2.0
5.3 The Hot Region Function ................................................................................................... 51
5.3.1 Adding Hot Regions ................................................................................................ 51
5.3.2 Modifying Hot Regions ........................................................................................... 52
5.3.3 Previewing Hot Regions.......................................................................................... 53
Chapter 6 Log Management............................................................................................................ 54
Chapter 7 Account Management and System Configuration .......................................................... 56
7.1 Account Management ....................................................................................................... 56
7.2 System Configuration ........................................................................................................ 57
7.2.1 General Settings ..................................................................................................... 58
7.2.2 File Saving Path Settings ......................................................................................... 59
7.2.3 Keyboard and Joystick Shortcuts Settings .............................................................. 60
7.2.4 Alarm Sound Settings ............................................................................................. 60
7.2.5 Email Settings ......................................................................................................... 61
Chapter 8 Forwarding Video Stream through Stream Media Server .............................................. 62
8.1 Adding the Stream Media Server ...................................................................................... 62
8.2 Adding Cameras to Stream Media Server to Forward Video Stream ................................ 63
Chapter 9 Decoding and Displaying Video on Video Wall ............................................................... 64
9.1 Adding the Decoding Device ............................................................................................. 64
9.2 Configuring Video Wall Settings ........................................................................................ 65
9.3 Displaying Video on Video Wall......................................................................................... 66
Troubleshooting .............................................................................................................................. 67
2
User Manual of NVMS-7000 v2.0
Chapter 1 Overview
1.1 Description
NVMS7000 is versatile video management software for the DVRs, NVRs, IP cameras, encoders
decoders, etc. It provides multiple functionalities, including real-time live view, video recording,
remote search and playback, file backup, etc., for the connected devices to meet the needs of
monitoring task. With the flexible distributed structure and easy-to-use operations, the client software
is widely applied to the surveillance projects of medium or small scale.
This user manual describes the function, configuration and operation steps of NVMS7000 software. To
ensure the properness of usage and stability of the software, please refer to the contents below and
read the manual carefully before installation and operation.
1.2 Running Environment
Operating System: Microsoft Windows 7/Windows 2008(32/64-bit operating system), Windows
2003/Windows XP (32-bit operating system)
CPU: Intel Pentium IV 3.0 GHz or above
Memory: 1G or above
Display: 1024*768 or above
Notes:

For high stability and good performance, these above system requirements must be met.

The software does not support 64-bit operating system; the above mentioned 64-bit operating
system refers to the system which supports 32-bit applications as well.
1.3 Function Modules
Control Panel of NVMS7000:
3
User Manual of NVMS-7000 v2.0
Menu Bar:
Open Captured picture
File
System
View
Open Video File
Open Log File
Search and view the video files recorded on local PC.
View the backup log files.
Exit
Exit the NVMS7000client software.
Lock
Lock screen operations. Log in the client again to unlock.
Switch User
Switch the login user.
Import System Config File
Import client configuration file from your computer.
Export System Config File
Export client configuration file to your computer.
1024*768
Display the window at size of 1024*768 pixels.
1280*1024
Display the window at size of 1280*1024 pixels.
1440*900
Display the window at size of 1440*900 pixels.
1680*1050
Display the window at size of 1680*1050 pixels.
Full Screen
Display the window in full screen.
Control Panel
Main View
Remote Playback
E-map
Auxiliary Screen Preview
Enter Control Panel interface.
Open Main View page.
Open Remote Playback page.
Open E-map page.
Open Auxiliary Screen Preview window.
Device Management
Open the Device Management page.
Event Management
Open the Event Management page.
Record Schedule
Tool
Search and view the captured pictures stored on local PC.
Account Management
Log Search
Open the Record Schedule page.
Open the Account Management page.
Open the Log Search page.
System Configuration
Open the System Configuration page.
Broadcast
Select camera to start broadcasting.
4
User Manual of NVMS-7000 v2.0
Device Arming Control
I/O Control
Player
Message Queue
Open Wizard
User Manual (F1)
Help
About
Language
Set the arming status of devices.
Turn on/off the alarm output.
Open the player to play the video files.
Display the information of Email message to be sent.
Open the guide for the client configuration.
Click to open the User Manual; you can also open the User
Manual by pressing F1 on your keyboard.
View the basic information of the client software.
Select the language for the client software and reboot the
software to activate the settings.
The NVMS7000 client software is composed of the following function modules:
The Main View module provides live view of network cameras and video encoders, and
supports some basic operations, such as picture capturing, recording, PTZ control, etc.
The Remote Playback module provides the search, playback, export of record files.
The E-map module provides the displaying and management of E-maps, alarm inputs, hot
regions and hot spots.
The Device Management module provides the adding, modifying and deleting of different
devices and the devices can be imported into groups for management.
The Event Management module provides the settings of arming schedule, alarm linkage
actions and other parameters for different events.
The Record Schedule module provides the schedule settings for recording.
The Account Management module provides the adding, modifying and deleting of user
accounts and different permissions can be assigned for different users.
The Log Search module provides the query of system log files and the log files can be
filtered by different types.
The System Configuration module provides the configuration of general parameters, file
saving paths, alarm sounds and other system settings.
The function modules are easily accessed by clicking the navigation buttons on the control panel or by
selecting the function module from the View or Tool menu.
You can check the information, including current user, network usage, CPU usage, memory usage and
time, in the upper-right corner of the main page.
5
User Manual of NVMS-7000 v2.0
1.4 Updates Instruction
Multiple newly-designed functions are offered in the latest NVMS7000 client software. You can get a
brief view of the updates instruction from the following contents.

Embedded Web Server
With the embedded web server, NVMS7000 client can be accessed via the web browser. And it
provides the functionalities of live view, playback, device management, account management,
system configuration, etc.

User-friendly Wizard for Operation Guide
NVMS7000 client offers a user-friendly wizard and it introduces some basic operations of the
software, such as adding device, importing device to group, configuring record schedule, etc.

Different View Modes
Different view modes are supported in the live view or playback process. You can play the video
in default view mode or in custom view mode. The custom view can be customized as desired.

Camera Linkage for Tampering Alarm/Video Loss Alarm
Enable the alarm triggered pop-up image function. When tampering alarm or video loss alarm
occurs, the image from the linked camera will pop up for notification.

Offline Device Adding
The offline device can also be added to the client with the required information input. When the
device comes online, the software will connect it automatically.

Alarm Input Hot Spot
Not only the cameras, but also the alarm inputs can be added to the E-map as hot spots.The
alarm input hot spots can detect the conditions of the surveillance scenario and give the alarm
information.
6
User Manual of NVMS-7000 v2.0
Chapter 2 Live View
2.1 User Registration and Login
For the first time to useNVMS7000 client software, you need to register a super user for login.
Steps:
1.
Input the super user name and password.
2.
Confirm the password.
3.
Optionally, check the checkbox Enable Auto-log into log in the software automatically.
4.
Click Register. Then, you can log in the software as the super user.
Notes:

A user name cannot contain any of the following characters: /\: *? “<> |

The password cannot be empty and the length of the password should be no less than six
characters.
When opening NVMS7000 after registration, you can log in the client software with the registered
user name and password.
Steps:
1.
Input the user name and password you registered.
2.
Optionally, check the checkbox Enable Auto-login to log in the software automatically.
3.
Click Login.
After running the client software, a wizard will pop up to guide you to add the device and do some
basic settings.
7
User Manual of NVMS-7000 v2.0
2.2 Adding the Encoding Device
Purpose:
After running the NVMS7000, devices including network cameras, video encoders, DVRs, NVRs, should
be added to the client for the remote configuration and management, such as live view, playback,
alarm settings, etc.
Perform the following steps to enter the Encoding Device Adding interface:
1.
Click the
icon on the control panel,
or click Tools->Device Management to open the Device Management page.
2.
Click the Server tab.
3.
Click Encoding Device to enter Encoding Device Adding interface.
You can add the device in the following ways:

By detecting the online devices, see Section 2.2.1Adding Online Devices.

By specifying the device IP address, see Section 2.2.2 Adding Devices Manually.

By specifying an IP segment, see Section 2.2.3Adding Devices by IP Segment.

By IP Server, see Section 2.2.4Adding Devices by IP Server.

By HiDDNS, see Section 2.2.5 Adding Devices by HiDDNS.
2.2.1 Adding Online Devices
Purpose:
The active online devices in the same local subnet with the client software will be displayed on a list.
You can click the Refresh Every 15s button to refresh the information of the online devices.
Steps:
1.
Select the devices to be added from the list.
2.
Click Add to Client to open the device adding dialog box.
3.
Input the required information.
Nickname: Edit a name for the device as you want.
8
User Manual of NVMS-7000 v2.0
Address: Input the device’s IP address. The IP address of the device is obtained automatically in
this adding mode.
Port: Input the device port number. The default value is 8000.
User Name: Input the device user name. By default, the user name is admin.
Password: Input the device password. By default, the password is 12345.
4.
Optionally, you can check the checkbox Export to Group to create a group by the device name. All
the channels of the device will be imported to the corresponding group by default.
5.
Click Add to add the device.
Click Add All, input the user name and password, and you can add all the online devices to the client
software.
Select the device from the list, click Modify Net info, and then you can modify the network
information of the selected device.
Select the device from the list, click Restore Default Password, and then you can restore the default
password of the selected device.
9
User Manual of NVMS-7000 v2.0
2.2.2 Adding Devices Manually
Steps:
1.
Click Add Device to open the device adding dialog box.
2.
Select IP/Domain as the adding mode.
3.
Input the required information.
Nickname: Edit a name for the device as you want.
Address: Input the device’s IP address or domain name.
Port: Input the device port number. The default value is 8000.
User Name: Input the device user name. By default, the user name is admin.
Password: Input the device password. By default, the password is 12345.
4.
Optionally, you can check the checkbox Export to Group to create a group by the device name. All
the channels of the device will be imported to the corresponding group by default.
5.
Click Add to add the device.
2.2.3 Adding Devices by IP Segment
Steps:
1.
Click Add Device to open the device adding dialog box.
2.
Select IP Segment as the adding mode.
3.
Input the required information.
Start IP: Input a start IP address.
End IP: Input an end IP address in the same network segment with the start IP.
Port: Input the device port number. The default value is 8000.
User Name: Input the device user name. By default, the user name is admin.
Password: Input the device password. By default, the password is 12345.
4.
Optionally, you can check the checkbox Export to Group to create a group by the device IP. All the
channels of the device will be imported to the corresponding group by default.
5.
Click Add, and the device of which the IP address is between the start IP and end IP will be added
10
User Manual of NVMS-7000 v2.0
to the device list.
2.2.4 Adding Devices by IP Server
Steps:
1.
Click Add Device to open the device adding dialog box.
2.
Select IP Server as the adding mode.
3.
Input the required information.
Nickname: Edit a name for the device as you want.
Server Address: Input the IP Server address.
Device ID: Input the device ID registered on the IP server.
User Name: Input the device user name. By default, the user name is admin.
Password: Input the device password. By default, the password is 12345.
4.
Optionally, you can check the checkbox Export to Group to create a group by the device name. All
the channels of the device will be imported to the corresponding group by default.
5.
Click Add to add the device.
11
User Manual of NVMS-7000 v2.0
2.2.5Adding Devices by HiDDNS
Steps:
1.
Click Add Device to open the device adding dialog box.
2.
Select HiDDNS as the adding mode.
3.
Input the required information.
Nickname: Edit a name for the device as you want.
Server Address:www.hiddns.com.
Device Domain Name: Input the device domain name registered on HiDDNS server.
User Name: Input the device user name. By default, the user name is admin.
Password: Input the device password. By default, the password is 12345.
4.
Optionally, you can check the checkbox Export to Group to create a group by the device name. All
the channels of the device will be imported to the corresponding group by default.
5.
Click Add to add the device.
Note: NVMS7000 also provides a method to add the offline devices. Check the checkbox Add Offline
Device, input the required information and the device channel count, and then click Add. When the
offline device comes online, the software will connect it automatically.
The devices will be displayed on the device list for management after added successfully. You can
check the resource usage, HDD status, recording status, and other information of the added devices
on the list.
Click Refresh All to refresh the information of all added devices. You can also input the device name in
the filter field for search.
Select device from the list, click Modify/Delete, and then you can modify/delete the information of
the selected device.
Select device from the list, click Remote Config, and then you can do some remote configurations of
the selected device if needed.
12
User Manual of NVMS-7000 v2.0
2.3 Group Management
Purpose:
The devices added can be organized into groups for a convenient management. You can get the live
view, play back the record files, and do some other operations of the device through the group.
Before you start:
Devices need to be added to the client software for group management.
Perform the following steps to enter the Group Management interface:
1.
Open the Device Management page.
2.
Click the Group tab to enter the Group Management interface.
Adding the Group
Steps:
1.
Click Add Group to open the Add Group dialog box.
2.
Input a group name as you want.
3.
Click OK to add the new group to the group list.
You can also check the checkbox Create Group by Device Name to create the new group by the
name of the selected device.
Importing Encoding Device to Group
Steps:
1.
Click Import on Group Management interface, and then click the Encoding Channel tab to open
13
User Manual of NVMS-7000 v2.0
the Import Encoding Channel page.
2.
Select the thumbnails/names of the encoding channels in the thumbnail/list view.
3.
Select a group from the group list.
4.
Click Import to import the selected encoding channels to the group.
You can also click Import All to import all the encoding channels to a selected group.
Notes:


You can also click the icon
on the Import Encoding Channel page to add a new group.
Up to 64 cameras can be added to one group.
The following buttons are available on the Import Encoding Channel page:
List View
View the encoding channel in list view.
Thumbnail View
View the encoding channel in thumbnail view.
Refresh
Refresh the latest information of added encoding channels.
Import
Create a group by device name and import the device to group.
Collapse/Expand
Collapse/Expand the thumbnails of encoding channels.
Modifying the Group/Channel
Steps:
1.
Select the group/channel from the group list on the Import Encoding Channel page.
2.
3.
Click , or double-click the group/channel name to open Modify Group/Camera dialog box.
Edit the group/channel information, including the group/camera name, the camera type, etc.
4.
Click OK to save the new settings.
You can also double-click the group/channel name on the Group Management interface to open
the Modify Group/Camera dialog box.
14
User Manual of NVMS-7000 v2.0
Removing Channels from the Group
Steps:
1.
Select the channel from the group list on the Import Encoding Channel page.
2.
Click to remove the channel from the group.
You can also select the channel on the Group Management interface, and then click Delete to
remove the channel from the group.
Select the group from the group list on the Import Encoding Channel page, and Click
remove all the channels from the group.
. You can
Deleting the Group
Steps:
1.
Select the group on the Group Management interface
2.
Click Delete Group or click the icon
and the selected group will be deleted.
2.4 Basic Operations in Live View
Purpose:
For the surveillance task, you can view the live video of the added network cameras and video
encoders on the Main View page. And some basic operations are supported, including picture
capturing, manual recording, PTZ control, etc.
Before you start:
A camera group is required to be defined for live view.
Click the
icon on the control panel,
or click View->Main View to open the Main View page.
15
User Manual of NVMS-7000 v2.0
Main View Page
1 View List
2 Camera List
3 PTZ Control Panel
4 Display Window of Live View
5 Live View Toolbar
Camera Status:
The camera is online and works properly.
The camera is in live view.
The camera is in recording status.
The camera is offline.
Live View Toolbar:
On the Main View page, the following toolbar buttons are available:
Set View
Set the screen layout mode and save the new settings for the
current view; save the current view as another new view.
Stop Live View
Stop the live view of all cameras.
Previous
Go for live view of the previous page.
Next
Go for live view of the next page.
Resume/Pause
Auto-switch
Click to resume/pause the auto-switch in live view.
Show /Hide the Menu
Show/Hide the config menu of auto-switch. Click again to hide.
Mute/Audio On
Turn off/on the audio in live view
Full Screen
Display the live view in full screen mode. Press ESC to exit.
Right-click on the display window in live view to open the Live View Management Menu:
16
User Manual of NVMS-7000 v2.0
The following buttons are available on the right-click Live View Management Menu:
Stop Live View
Stop the live view in the display window.
Capture
Capture the picture in the live view process.
Print Captured Picture
Capture the current picture and then print the picture.
Send Email
Capture the current picture and then send an Email notification to
one or more receivers. The captured picture can be attached.
Start/Stop Recording
Start/Stop the manual recording. The record file is stored in the PC.
Open Window PTZ
Enable PTZ control function on the display window. Click again to
Control
disable the function.
Open Digital Zoom
Enable the digital zoom function. Click again to disable the function.
Switch to Instant
Playback
Start/Stop Two-way
Audio
Enable/Disable Audio
Camera Status
Switch to instant playback mode.
Click to start/stop the two-way audio of the camera in live view.
Click to enable/disable the audio in live view.
Display the status of the camera in live view, including the recording
status, signal status, connection number, etc.
Remote Configuration
Open the remote configuration page of the camera in live view.
Synchronization
Sync the camera in live view with the PC running the client software.
Full Screen
Display the live view in full screen mode. Click the icon again to exit.
2.4.1 Starting and Stopping the Live View
Starting Live View for One Camera
Steps:
1.
Open the Main View page.
2.
Optionally, click the
icon in live view toolbar, then click the screen layout button
select the screen layout mode for live view.
3.
Click-and-drag the camera to the display window,
and
17
User Manual of NVMS-7000 v2.0
or double-click the camera name after selecting the display window to start the live view.
Note: You can click-and-drag the video of the camera in live view to another display window if
needed.
Starting Live View for Camera Group
Steps:
1.
Open the Main View page.
2.
Click-and-drag the group to the display window,
or double-click the group name to start the live view.
Note: The display window number is self-adaptive to the camera number of the group.
Starting Live View in Default View Mode
Purpose:
The video of the added cameras can be displayed in different view modes. 4 frequently-used default
view modes are selectable: 1-Screen, 4-Screen, 9-Screen and 16-Screen.
Steps:
1.
Open the Main View page.
2.
Click the icon
3.
Click to select the default view mode and the video of the added cameras will be displayed in a
to expand the default view list.
sequence in the selected view.
Note: Right-click the current default view name on the list and click Save View As., and you can save
the default view as a custom view.
Starting Live View in Custom View Mode
Purpose:
The view mode can also be customized for the video live view.
Steps:
1.
Open the Main View page.
2.
Click the icon
3.
Click New View in the custom view list to create a new view.
4.
Input the view name and click Add. The new view is of 4-Screen mode by default.
5.
Optionally, Click the
icon in live view toolbar, then click the screen layout button
select the screen layout mode for the new view.
6.
Click-and-drag the camera/group to the display window,
to expand the custom view list.
and
or double-click the camera/group name in custom view mode to start the live view.
7.
Click the icon
to save the new view.
Right-click the custom view name on the list, and a menu pops up as follows:
The following buttons are available on the right-click menu:
18
User Manual of NVMS-7000 v2.0
Edit View Name
Edit the name of the custom view.
Delete View
Delete the custom view.
Save View
Save the new settings of the custom view.
Save View As.
Save the current view as another custom view.
Stopping the Live View
Steps:
1.
Select the display window.
2.
Click the icon
display window,
that appears in the upper-right corner when the mouse pointer is over the
or click Stop Live View on the right-click menu to stop the live view of the display window.
You can also click the button
in live view toolbar to stop all the live view.
2.4.2 Auto-switch in Live View
Camera Auto-switch
Purpose:
The video stream of the cameras from the same group will switch automatically in a selected display
window in camera auto-switch.
Steps:
1.
Open the Main View page.
2.
Select a display window for camera auto-switch.
3.
Click the icon
4.
Select a group and click the icon
5.
You can click the icon
in the toolbar and select the switching interval.
/
on the group node.
to pause/resume the camera auto-switch.
Single View Auto-switch
Purpose:
The video of all the cameras on the camera list will switch automatically in a selected default view in
single view auto-switch.
Steps:
1.
Open the Main View page.
2.
Click the icon
3.
Select a default view and click the icon
4.
You can click the icon
in the toolbar and select the switching interval.
/
on the selected view node.
to pause/resume the single view auto-switch.
Multi-view Auto-switch
Purpose:
The custom views will switch automatically in multi-view auto-switch. The custom views need to be
added before proceeding.
Steps:
1.
Open the Main View page.
19
User Manual of NVMS-7000 v2.0
2.
Click the icon
in the toolbar and select the switching interval.
3.
Click the icon
4.
You can click the icon
on the custom view node.
/
to pause/resume the multi-view auto-switch.
2.4.3 PTZ Control in Live View
The software provides PTZ control for cameras with pan/tilt/zoom functionality. You can set the preset,
patrol and pattern for the cameras on the PTZ Control panel. And you can also open window PTZ
control for the operations of PTZ cameras.
Click the icon
to expand the PTZ Control panel.
The following buttons are available on the PTZ Control panel:
Zoom
Focus
Iris
Auxiliary Focus
3D Positioning
Light
Wiper
Lens Initialization
Configuring the Preset
A preset is a predefined image position which contains information of pan, tilt, focus and other
parameters.
Perform the following steps to add a preset:
1.
Click the Preset button to enter the PTZ preset configuration panel.
2.
Click the direction buttons on the PTZ control panel to steer the camera to the desired view.
3.
4.
Select a PTZ preset number from the preset list and click
Input the name of the preset in the pop-up dialog box.
5.
Click OK to save the settings.
.
20
User Manual of NVMS-7000 v2.0
To call a configured preset, double-click the preset, or select the preset and click the icon
To modify a configured preset, select the preset from the list and click the icon
.
To delete a configured preset, select the preset from the list and click the icon
.
.
Configuring the Pattern
A pattern is a memorized, repeating series of pan, tilt, zoom, and preset functions.
Perform the following steps to add a pattern:
1.
Click the Pattern button to enter the PTZ pattern configuration panel.
2.
3.
Click
to start recording of this pattern path.
Use the direction buttons to control the PTZ movement.
4.
Click
to stop and save the pattern recording.
5. Click the icon
to call the pattern. To stop calling the pattern, click .
Note: Only one pattern can be configured, and the newly-defined pattern will overwrite the previous
one.
21
User Manual of NVMS-7000 v2.0
Configuring the Patrol
A patrol is a scanning track specified by a group of user-defined presets, with the scanning speed
between two presets and the dwell time at the preset separately programmable.
Before you start:
Two or more presets for one PTZ camera need to be added.
Perform the following steps to add and call a patrol:
1.
Click the Patrol button to enter the PTZ patrol configuration panel.
2.
Select a track number from the drop-down list.
3.
4.
Click
to add a preset, and set the dwell time and patrol speed for the preset.
Repeat the above operation to add other presets to the patrol.
5.
Optionally, you can click
6. Click the icon
Notes:
or
to edit or delete a preset in the patrol path.
to call the patrol. To stop calling the patrol, click
.

Up to 16 patrols can be configured.

The preset dwell time can be set to 1~255 sec, and the patrol speed can be set to level 1~40.
2.4.4 Manual Recording and Capture
Toolbar in Each Live View Display Window:
In each live view display window, the following toolbar buttons are available:
Capture
Capture the picture in the live view process.
Start/Stop Recording
Start/Stop manual recording. The record file is stored in the PC.
Switch to Instant
Playback
Switch to the instant playback mode.
Manual Recording in Live View
Purpose:
22
User Manual of NVMS-7000 v2.0
Manual Recording function allows you to record the live video on the Main View page manually and
the record files are stored in the local PC.
Steps:
1.
Move the mouse pointer to the display window in live view to show the toolbar.
2.
Click
in the toolbar of the display window or on the right-click Live View Management Menu
to start the manual recording. The icon
3.
turns to
.
Click the icon
to stop the manual recording.
A prompt box with the saving path of the video files you just recorded will pop up if all the
operations succeed.
Notes:

During the manual recording, an indicator
window.

The saving path of video files can be set on the System Configuration interface. For details, see
appears in the upper-right corner of the display
Section 7.2.2 File Saving Path Settings.
Viewing Local Record Files
Steps:
1.
Click File->Open Video File to open the Record Files page.
2.
Select the camera to be searched from the Camera Group list.
3.
4.
Click the icon
to specify the start time and end time for the search.
Click Search. The video files recorded between the start time and end time will be displayed.
Select the video file, and click Delete. You can delete the video file.
Select the video file, and click Email Linkage. You can send an Email notification with the selected
video file attached.
Select the video file, and click Save as. You can save a new copy of the video file.
Note: To send an Email notification, the Email settings need to be configured before proceeding. For
details, see Section 7.2.5 Email Settings.
Double-click the video file and the video file can be played back locally.
23
User Manual of NVMS-7000 v2.0
The following buttons are available on the local playback page:
CIF/4CIF
Display the video in cif/4cif resolution.
Full Screen
Display the local playback page in full screen mode.
Close
Close the local playback page of the record files.
Pause/Play
Pause/Start the playback of the record files.
Stop
Stop the playback of the record files.
Speed
Set the playback speed.
Single Frame
Play back the record files frame by frame.
Digital Zoom
Enable the digital zoom function. Click again to disable.
Enable/Disable Audio
Click to enable/disable the audio in the local playback.
Capture
Capture the picture in the playback process.
Capturing Picture in Live View
Steps:
1.
Move the mouse pointer to the display window in live view to show the toolbar.
2.
Click the icon
in the toolbar of the display window or on the right-click Live View
Management Menu.
A small window of the captured picture will be displayed to notify whether the capturing
operation is done or not.
Note: The saving path of the captured pictures can be set on the System Configuration interface. For
details, see Section 7.2.2 File Saving Path Settings.
Viewing Captured Pictures
The pictures captured in live view are stored in the PC running the software. You can view the
captured pictures if needed.
Steps:
1.
Click File->Open Captured Picture to open the Captured Picture page.
2.
Select the camera to be searched from the Camera Group list.
24
User Manual of NVMS-7000 v2.0
3.
4.
Click the icon
to specify the start time and end time for the search.
Click Search. The pictures captured between the start time and end time will be displayed.
5.
Double-click the captured picture to enlarge it for a better view.
Select the captured picture, and click Print. You can print the selected picture.
Select the captured picture, and click Delete. You can delete the selected picture.
Select the captured picture, and click Email Linkage. You can send an Email notification with the
selected picture attached.
Select the captured picture, and click Save as. You can save a new copy of the selected picture.
2.4.5 Instant Playback
Purpose:
The record files can be played back instantly on the Main View page. Instant playback shows a passage
of the video which was remarkable, or which was unclear on the first sight. Thus, you can get an
immediate review if needed.
Before you start:
The video files need to be recorded on the storage devices, such as the SD/SDHC cards and HDDs on
the DVRs, NVRs, Network Cameras, etc., or on the storage servers.
Steps:
1.
Start the live view and move the mouse pointer to the display window to show the toolbar.
2.
Click the icon
in the toolbar and a list of time periods pops up.
30s, 1 min, 3 min, 5 min, 8 min, and 10 min are selectable.
3.
Select a time period to start the instant playback.
Example: If the current time of the live view is 09:30:00, and you select 3 min, then the instant
playback will start from 09:27:00.
4. Click the icon
Notes:
again to stop the instant playback and go back for the live view.

During the instant playback, an indicator
window.

The live view process will continue after the instant playback completed.
appears in the upper-right corner of the display
25
User Manual of NVMS-7000 v2.0
Right-click on the display window to open the Instant Playback Management Menu:
The following buttons are available on the right-click Instant Playback Management Menu:
Pause/Play
Pause/Start the instant playback in the display window.
Stop
Stop the instant playback and return to the live view mode.
Speed Up/Down
Increase/Decrease the play speed of the instant playback.
Single Frame
Play back the record file frame by frame.
Open Digital Zoom
Enable the digital zoom function. Click again to disable the function.
Capture
Capture the picture in the instant playback process.
Print Captured Picture
Capture the current picture and then print the picture.
Send Email
Capture the current picture and then send an Email notification to
one or more receivers. The captured picture can be attached.
Start/Stop Recording
Start/Stop clipping the record files.
Enable/Disable Audio
Click to turn on/off the audio in instant playback.
Switch to Live View
Switch to live view mode.
Full Screen
Display the instant playback in full screen mode. Click again to exit.
26
User Manual of NVMS-7000 v2.0
2.4.6 Other Functions in Live View
There are some other functions supported in the live view, including digital zoom, two-way audio,
camera status and synchronization.
Auxiliary Screen Preview
The live video can be displayed on different auxiliary screens for the convenient preview of multiple
monitoring scenes. Up to 3 auxiliary screens are supported.
Digital Zoom
Use the left key of mouse to drag a rectangle area in the lower-right/upper-left direction, and then the
rectangle area will zoom in/out.
Two-way Audio
Two-way audio function enables the voice talk of the camera. You can get not only the live video but
also the real-time audio from the camera. This two-way audio can be used for only one camera at one
time.
Camera Status
The camera status, such as recording status, signal status, connection number, etc., can be detected
and displayed for check. The status information refreshes every 10 seconds.
Synchronization
The synchronization function provides a way to synchronize the live video clock with the PC which
runs the client software.
27
User Manual of NVMS-7000 v2.0
Chapter 3 Remote Record Schedule Settings
and Playback
When the video storage devices are the HDDs, Net HDDs, SD/SDHC cards on the local device, or the
remote storage server connected, you can set the record schedule for the cameras for the continuous,
alarm triggered or command triggered recording. And the record files can be searched for the remote
playback.
3.1 Remote Recording
Purpose:
The video files can be recorded on the HDDs, Net HDDs, SD/SDHC cards on the local device, or the
storage server connected.
Click the
icon on the control panel,
or click Tool->Record Schedule to open the Record Schedule page.
3.1.1 Recording on Storage Devices on the DVRs, NVRs, or
Network Cameras
Purpose:
Some local devices, including the DVRs, NVRs, and Network Cameras, provide storage devices such as
the HDDs, Net HDDs and SD/SDHC cards for record files. You can set a record schedule or capture
schedule for the channels of the local devices.
28
User Manual of NVMS-7000 v2.0
Note: The pictures captured through the capture schedule are stored on the local device and can be
searched on the remote configuration page of the device.
Before you start:
The newly installed storage devices need to be formatted. Go to the remote configuration page of the
device, click Storage->General, select the HDD or SD/SDHC card, and click Format to initialize the
selected storage device.
Steps:
1.
Open the Record Schedule page.
2.
Select the camera in the Camera Group list.
3.
Check the checkbox Record Schedule under Local Recording to enable device local recording.
4.
Select the record schedule template from the drop-down list.
All-day Template: for all-day continuous recording.
Weekday Template: for working-hours continuous recording from 8:00 AM to 8:00 PM.
Alarm Template: for motion detection or alarm input triggered recording.
Template 01-08: fixed templates for specific schedules. You can edit the templates if needed.
Custom: can be customized as desired.
If you need to edit or customize the template, see Configuring Record Schedule Template.
5.
Click Advanced Settings to set the recording parameters. For details, see Table 3.1 Advanced
Recording Settings.
6.
Optionally, click Copy to… to copy the record schedule settings to other channels.
7.
Click Save to save the settings.
Table 3.1 Advanced Recording Settings
Parameters
Pre-record
Post-record
Video Expired Time
Redundant Record
Record Audio
Descriptions
Normally used for the event triggered record, when you want to record before
the event happens
After the event finished, the video can also be recorded for a certain time.
The time for keeping the record files in the storage device, once exceeded, the
files will be deleted. The files will be saved permanently if the value is set as 0.
Save the video files not only in the R/W HDD but also in the redundant HDD.
Record the video files with audio or not.
29
User Manual of NVMS-7000 v2.0
Configuring Record Schedule Template
Perform the following steps to configure the record schedule template:
If Template 01-08 is selected from the drop-down list, start from step 1;
If Custom is selected from the drop-down list, start from step 2.
1.
Click Edit to enter the Templates Management interface. Select the template to be set and you
can edit the template name.
2.
Set the time schedule for the selected template.
refer to normal schedule record. The schedule time bar is green yellow.
refers to the schedule record for the alarm input or motion detection event. The
schedule time bar is red.
refers to the schedule record triggered by command. The schedule time bar is
green.
Note: Record triggered by command is only available for the ATM transactions when the ATM DVR
is added to NVMS7000.
3.
When the cursor turns to
, you can edit the schedule time bar.
When the cursor turns to
, you can move the selected time bar you just edited.
When the cursor turns to
, you can lengthen or shorten the selected time bar.
Optionally, you can select the schedule time bar,
and then click the icon
or click the icon
4.
to delete the selected time bar,
to delete all the time bars,
or click the icon
to copy the time bar settings to the other dates.
Click OK to save the settings.
You can click Save as Schedule Template on the Custom Schedule interface, and then the custom
template can be saved as template 01--08.
Note: Up to 8 time periods can be set for each day in the record schedule.
30
User Manual of NVMS-7000 v2.0
3.1.2 Recording on Storage Server
Purpose:
The storage server performs as a NVR installed on the PC. The record files can be stored in the storage
server and you can search the files for remote playback.
Before you start:、
The storage server application software needs to be installed and it is packed in the NVMS7000
software package. When installing the NVMS7000, check the checkbox Storage Server to enable the
installation of storage server.
Adding the Storage Server
Steps:
1.
Click the shortcut icon
on the desktop to run the storage server.
Note: You can also record the video files on the storage server installed on other PC.
2.
Open the Device Management page and click the Server tab.
3.
Click Add New Device Type, select Storage Server and click OK.
4.
Click Storage Server on the list to enter the Storage Server Adding interface.
31
User Manual of NVMS-7000 v2.0
You can add the storage server in the following ways:

By detecting the online devices, see Section 2.2.1 Adding Online Devices.

By specifying the device IP address, see Section 2.2.2 Adding Devices Manually.

By specifying an IP segment, see Section 2.2.3Adding Devices by IP Segment.

By IP Server, see Section 2.2.4Adding Devices by IP Server.
Formatting the HDDs
The HDDs of the storage server need to be formatted for the record file storage.
Steps:
1.
Select the added storage server from the list and click Remote Config.
2.
Click Storage->General, to enter the HDD Formatting interface.
3.
Select the HDD from the list and click Format. You can check the formatting process from the
process bar and the status of the formatted HDD changes from Raw to Normal Status.
Note: Formatting the HDDs is to pre-allocate the disk space for storage and the original data of the
formatted HDDs will not be deleted.
Configuring Storage Server Record Schedule
Before you start:
The storage server needs to be added to the client software and the HDDs need to be formatted for
the record file storage.
Steps:
1.
Open the Record Schedule page.
2.
Select the camera from the Camera Group list.
3.
Check the checkbox Storage Server to enable recording on storage server.
4.
Select the storage server from the drop-down list.
5.
Select the record schedule template from the drop-down list.
If you need to edit or customize the template, see Configuring Record Schedule Template.
6.
Click Advanced Settings to set the pre-record time, post-record time and video expired time.
7.
Click Save to save the settings.
32
User Manual of NVMS-7000 v2.0
3.2 Remote Playback
Purpose:
The record files stored on the local device or the storage server can be searched by custom view,
camera or triggering event, and then can be played back remotely.
Click the
icon on the control panel,
or click View->Remote Playback to open the Remote Playback page.
Remote Playback Page
1 View List, Camera List and Event List
2 Calendar
3 Search Options
4Search Result List
5 Display Window of Playback
6 Playback Toolbar
7 Timeline
3.2.1 Normal Playback
Purpose:
The record files can be searched by custom view, camera or triggering event for the Normal Playback.
Searching Record Files for Normal Playback
Steps:
1.
Open the Remote Playback page.
33
User Manual of NVMS-7000 v2.0
2.
3.
Click
to expand the View List or Camera List on the left-side.
Select the view or camera to be searched from the list.
4.
Select the day to be searched on the calendar.
You can also click
to show more search options, and then click the icon
start time and end time for the search.
5.
to specify the
Click Search. The record files of the selected view or camera will be displayed on the Search
Result list. You can filter the results through the Filter text field.
Notes:

You can also search the record files by the card number (only applicable to ATM DVR) or by the
file type.

If there are record files for that camera in that day, in the calendar, the icon for that day is

displayed as . Otherwise it is displayed as .
Up to 16 cameras can be searched simultaneously.
Normal Playback
After searching the record files for the normal playback, you can play back the record files in the
following two ways:

Playback by File List
Select the record file from the search result list, and then click the icon
in the toolbar,
or double-click the record file to play the video on the display window of playback.

Playback by Timeline
The timeline indicates the time duration for the record file, and the record files of different types
are color coded. Click on the timeline to play back the video of the specific time.
You can click
or
to scale up or scale down the timeline bar.
You can click
or
to go to the previous or the next time period.
You can use the mouse wheel to zoom in or zoom out on the timeline.
34
User Manual of NVMS-7000 v2.0
Normal Playback Toolbar:
On the Normal Playback page, the following toolbar buttons are available:
Async/Sync Playback
Click to play back the record files synchronously/asynchronously.
Stop Playback
Stop the playback of all cameras.
Pause/Start Playback
Pause/Start the playback of the record files.
Single Frame
Play back the record files frame by frame.
Volume
Click to turn on/off the audio and adjust the audio volume.
Full Screen
Display the video playback in full screen mode. Press ESC to exit.
Note: You can move the slider on the Playback Speed Bar to set the playback speed.
3.2.2 Event Playback
Purpose:
The recordings triggered by motion detection or alarm input can be searched for Event Playback and
this function requires the support of the connected device.
Searching Record Files for Event Playback
Steps:
1.
Open the Remote Playback page.
2.
3.
Click
to expand the Event List on the left-side.
Click Motion Detection or Alarm Input, and select the cameras or alarm input sensors.
4.
Select the day to be searched on the calendar.
You can also click
to show more search options, and then click the icon
start time and end time for the search.
5.
to specify the
Click Search. The recordings from the selected cameras and sensors triggered by motion
detection or alarm input will be displayed on the Search Result list.
35
User Manual of NVMS-7000 v2.0
Event Playback
After searching the recordings triggered by the event, you can play back the record files in the
following two ways:

Playback by File List
Select the record file from the search result list, and then click the icon
in the toolbar,
or double-click the record file to play the video on the display window of playback.

Playback by Timeline
The timeline indicates the time duration for the record file. Click on the timeline to play back the
video of the specific time.
You can click
or
to scale up or scale down the timeline bar.
You can click
or
to go to the previous or the next time period.
You can use the mouse wheel to zoom in or zoom out on the timeline.
Event Playback Toolbar:
On the Remote Playback page, the following toolbar buttons are available:
Stop Playback
Stop the playback of all channels.
Pause/Start Playback
Pause/Start the playback of record files.
Single Frame
Play back the record files frame by frame.
Previous Event
Go to the playback of the previous event.
Next Event
Go to the playback of the next event.
Volume
Click to turn on/off the audio and adjust the audio volume.
Full Screen
Display the video playback in full screen mode. Press ESC to exit.
You can move the slider on the Playback Speed Bar to set the playback speed.
3.2.3 Synchronous Playback
Purpose:
In synchronous playback, the record files can be played back in synchronization.
Note: Record files from up to 16 cameras can be played back simultaneously.
Synchronous Playback for Some Searched Cameras
Steps:
1.
Start the normal playback of the searched cameras.
2.
Click
in the toolbar, and then the record files in normal playback will be played in sync. The
icon
turns to
3.
.
To disable the synchronous playback, click the icon
.
Synchronous Playback for All Searched Cameras
Steps:
1.
Search the record files for the normal playback.
2.
Click
in the toolbar to enable the synchronous playback. The icon
turns to
.
36
User Manual of NVMS-7000 v2.0
3.
Select the record file from the list and click
,
or click on the timeline to start the synchronous playback for all searched cameras.
4.
To disable the synchronous playback, click the icon
.
37
User Manual of NVMS-7000 v2.0
Chapter 4 Event Management
Purpose:
In NVMS7000 client software, rules can be set up for triggers and linkage actions. You can assign
linkage actions to the trigger by setting up a rule. For example, when motion is detected, an audible
warning appears or other linkage actions happen.
Click the
icon on the control panel,
or click Tool->Event Management to open the Event Management page.
You can set different linkage actions for the following triggers:

Motion Detection

Tampering Alarm

PIR Alarm

Video Loss

Alarm Input

Device Exception
4.1 Configuring Motion Detection Alarm
Purpose:
A motion detection alarm is triggered when the client software detects motion within its defined area.
The linkage actions, including alarm output, channel record and client action can be set.
Steps:
1.
Open the Event Management page and click Camera Event tab.
2.
Select the camera to be configured and select Motion Detection as the event type.
3.
Check the checkbox Enable to enable the function of motion detection.
4.
Select the arming schedule template from the drop-down list.
All-day Template: for all-day continuous arming.
Weekday Template: for working-hours continuous arming from 8:00 AM to 8:00 PM.
38
User Manual of NVMS-7000 v2.0
Template 01-09: fixed templates for special schedules. You can edit the templates if needed.
Custom: can be customized as desired.
If you need to edit or customize the template, see Configuring Arming Schedule Template.
5.
Click-and-drag the mouse to draw a defined area for the arming region.
You can click the icon
to set the whole video area as detection area, or click the icon
clear all the detection area.
6.
to
Drag the slider on the sensitivity bar to adjust the motion detection sensitivity. The larger the
value is, the more sensitive the detection is.
7.
Check the checkboxes to activate the linkage actions. For details, see Table 4.1 Linkage Actions for
Motion Detection Alarm.
8.
Optionally, click Copy to… to copy the event parameters to other channels.
9.
Click Save to save the settings.
Table 4.1 Linkage Actions for Motion Detection Alarm
Linkage Actions
Alarm Output
Descriptions
Enable the alarm output function. Select the alarm output port and the
external device connected to the port can be controlled.
Channel Record
Start the recording of the selected cameras when alarm is triggered.
Audible Warning
The client software gives an audible warning when alarm is triggered.
Email Linkage
Send an Email notification of the alarm information to one or more receivers.
Alarm on E-map
Display the alarm information on the E-map.
Alarm Triggered
The Image with alarm information pops up when alarm is triggered.
Pop-up Image
Alarm Triggered
Display the video on the Video Wall when alarm is triggered.
Video Wall Display
Configuring Arming Schedule Template
Perform the following steps to configure the arming schedule template:
If Template 01-09 is selected in the drop-down list, start from step 1;
39
User Manual of NVMS-7000 v2.0
If Custom is selected in the drop-down list, start from step 2.
Steps:
1.
Click Edit to enter the Templates Management interface. Select the template to be set and you
can edit the template name.
2.
3.
Set the time schedule for the selected template.
When the cursor turns to
, you can edit the schedule time bar.
When the cursor turns to
, you can move the selected time bar you just edited.
When the cursor turns to
, you can lengthen or shorten the selected time bar.
Optionally, you can select the schedule time bar,
and then click the icon
or click the icon
4.
to delete the selected time bar,
to delete all the time bars,
or click the icon
to copy the time bar settings to the other dates.
Click OK to save the settings.
You can click Save as Schedule Template on the Custom Schedule interface, and then the custom
template can be saved as template 01--09.
Note: Up to 4 time periods can be set for each day in the arming schedule template.
40
User Manual of NVMS-7000 v2.0
4.2 Configuring Tampering Alarm
Purpose:
A tampering alarm is triggered when the camera is covered and the monitoring area cannot be viewed.
The linkage actions, including alarm output and client action can be set.
Steps:
1.
Open the Event Management page and click the Camera Event tab.
2.
Select the camera to be configured and select Tampering Alarm as the event type.
3.
Check the checkbox Enable to enable the function of tampering alarm.
4.
Select the arming schedule template from the drop-down list.
If you need to edit or customize the template, see Configuring Arming Schedule Template.
5.
Select the triggered camera. The image or video from the triggered camera will pop up or be
displayed on the Video Wall when tampering alarm occurs.
6.
Click-and-drag the mouse to draw a defined area for the arming region.
7.
Drag the slider on the sensitivity bar to adjust the tampering alarm sensitivity.
8.
Check the checkboxes to activate the linkage actions. For details, see Table 4.2 Linkage Actions for
Tampering Alarm.
9.
Optionally, click Copy to…to copy the event parameters to other cameras.
10. Click Save to save the settings.
Table 4.2 Linkage Actions for Tampering Alarm
Linkage Actions
Alarm Output
Audible Warning
Email Linkage
Descriptions
Enable the alarm output function. Select the alarm output port and the
external device connected to the port can be controlled.
The client software gives an audible warning when alarm is triggered.
Send an Email notification of the alarm information to one or more receivers.
Alarm on E-map
Display the alarm information on the E-map.
Alarm Triggered
The Image of the triggered camera pops up when alarm is triggered.
Pop-up Image
41
User Manual of NVMS-7000 v2.0
Alarm Triggered
Video Wall Display
Display the video of the triggered camera on the Video Wall when alarm is
triggered.
4.3 Configuring PIR Alarm
Purpose:
A PIR (Passive Infrared) alarm is triggered when an intruder moves within the detector's field of view.
The heat energy dissipated by a person, or any other warm blooded creature such as dogs, cats, etc.,
can be detected.
Note: The PIR Alarm function requires the support of connected device.
Steps:
1.
Open the Event Management page and click the Camera Event tab.
2.
Select the camera to be configured and select PIR Alarm as the event type.
3.
Check the checkbox Enable to enable the function of PIR alarm.
4.
Input a descriptive name of the alarm.
5.
Check the checkboxes to activate the linkage actions. For details, see Table 4.3 Linkage Actions for
PIR Alarm.
6.
Optionally, click Copy to… to copy the event parameters to other channels.
7.
Click Save to save the settings.
Table 4.3 Linkage Actions for PIR Alarm
Linkage Actions
Alarm Output
Descriptions
Enable the alarm output function. Select the alarm output port and the
external device connected to the port can be controlled.
Channel Record
Start the recording of the selected cameras when alarm is triggered.
Audible Warning
The client software gives an audible warning when alarm is triggered.
Email Linkage
Send an Email notification of the alarm information to one or more receivers.
Alarm on E-map
Display the alarm information on the E-map.
Alarm Triggered
The Image with alarm information pops up when alarm is triggered.
Pop-up Image
Alarm Triggered
Display the video on the Video Wall when alarm is triggered.
Video Wall Display
42
User Manual of NVMS-7000 v2.0
4.4 Configuring Video Loss Alarm
Purpose:
When the client software cannot receive video signal from the front-end devices, the video loss alarm
will be triggered. The linkage actions, including alarm output and client action can be set.
Steps:
1.
Open the Event Management page and click Camera Event tab.
2.
Select the camera to be configured and select Video Loss as the event type.
3.
Check the checkbox Enable to enable the function of video loss alarm.
4.
Select the arming schedule template from the drop-down list.
If you need to edit or customize the template, see Configuring Arming Schedule Template.
5.
Select the triggered camera. The image or video from the triggered camera will pop up or be
displayed on the Video Wall when video loss alarm occurs.
6.
Check the checkboxes to activate the linkage actions. For details, see Table 4.4 Linkage Actions for
Video Loss Alarm.
7.
Optionally, click Copy to…to copy the event parameters to other cameras.
8.
Click Save to save the new settings.
Table 4.4 Linkage Actions for Video Loss Alarm
Linkage Actions
Alarm Output
Audible Warning
Email Linkage
Descriptions
Enable the alarm output function. Select the alarm output port and the
external device connected to the port can be controlled.
The client software gives an audible warning when alarm is triggered.
Send an Email notification of the alarm information to one or more receivers.
Alarm on E-map
Display the alarm information on the E-map.
Alarm Triggered
The Image of the triggered camera pops up when alarm is triggered.
Pop-up Image
Alarm Triggered
Video Wall Display
Display the video of the triggered camera on the Video Wall when alarm is
triggered.
43
User Manual of NVMS-7000 v2.0
4.5 Configuring Alarm Input Linkage
Purpose:
When a device's alarm input port receives a signal from an external alarm device, such as smoke
detector, doorbell, etc., the alarm input linkage actions are triggered for notification.
Before you start:
Add the alarm inputs to the client, click Import on the Group Management interface, click the Alarm
Input tab and import alarm inputs into groups for management.
Steps:
1.
Open the Event Management page and click the Alarm Input tab.
2.
Select the alarm input channel to be configured.
3.
Check the checkbox Enable.
4.
Input a descriptive name of the alarm.
5.
Set the alarm status according to the alarm input device.
6.
Select the arming schedule template from the drop-down list.
If you need to edit or customize the template, see Configuring Arming Schedule Template.
7.
Check the checkboxes to activate the linkage actions. For details, see Table 4.5 Linkage Actions for
Alarm Input.
8.
Optionally, click Copy to…to copy the event parameters to other alarm inputs.
9.
Click Save to save the settings.
Table 4.5 Linkage Actions for Alarm Input
Linkage Actions
Alarm Output
Descriptions
Enable the alarm output function. Select the alarm output port and the
external device connected to the port can be controlled.
Channel Record
Start the recording of the selected cameras when alarm is triggered.
Audible Warning
The client software gives an audible warning when alarm is triggered.
Email Linkage
Send an Email notification of the alarm information to one or more receivers.
44
User Manual of NVMS-7000 v2.0
Alarm on E-map
Display the alarm information on the E-map.
Alarm Triggered
The Image with alarm information pops up when alarm is triggered.
Pop-up Image
Alarm Triggered
Display the video on the Video Wall when alarm is triggered.
Video Wall Display
4.6 Configuring Device Exception Linkage
Steps:
1.
Open the Event Management page and click the Device Exception tab.
2.
Select the device to be configured.
3.
Select the device exception type, including HDD full, HDD exception, illegal login, etc.
4.
Check the checkbox Enable.
5.
Check the checkboxes to activate the linkage actions. For details, see Table 4.6 Linkage Actions for
Device Exception.
6.
Optionally, click Copy to…to copy the event parameters to other devices.
7.
Click Save to save the settings.
Table 4.6 Linkage Actions for Device Exception
Linkage Actions
Alarm Output
Audible Warning
Email Linkage
Descriptions
Enable the alarm output function. Select the alarm output port and the
external device connected to the port can be controlled.
The client software gives an audible warning when alarm is triggered.
Send an Email notification of the alarm information to one or more receivers.
45
User Manual of NVMS-7000 v2.0
4.7 Viewing Alarm and Event Information
The information of recent alarms and events can be displayed. Click the icon
Toolbar to show the Alarms and Events panel.
in Alarms and Events
On the Alarms and Events panel, the following toolbar buttons are available:
Clear Info
Enable/Disable Alarm
Triggered Pop-up Image
Clear the information of alarms and events displayed on the list.
Click to enable/disable image pop-up when alarms occur.
Enable/Disable Audio
Click to enable/disable the audio warning for the alarm.
Auto Hide/Lock
Click to hide automatically/lock the Alarms and Events panel.
Maximize
Maximize the Alarms and Events panel in a new tab page.
Show/Hide
Click to show/hide the Alarms and Events panel.
Viewing Alarms Information
Different alarm types can be displayed on the panel: Motion Detection, Video Exception, Alarm Input
and Device Exception. You can check the checkbox to enable the displaying of that type alarm.
Before you start:
To display the alarms, the event parameters need to be configured.
Steps:
1.
Click the Alarm tab.
2.
Check the checkboxes of different alarm types.
3.
When an alarm occurs, the icon
twinkles to call attention. The alarm information, including
the time, source, details and content will be displayed.
Click
Click
to get a live view of the alarm triggered camera.
to send an Email notification of the alarm to one or more receivers.
Click
to display the video of alarm triggered camera on the Video Wall.
Click under the Note column to input a prompt message for the alarm.
4.
To clear the alarm information, click the icon
Clear.
or right-click on an alarm log and then click
Viewing Events Information
Purpose:
The abnormal events of the client software, such as the live view failure, device disconnection, can
also be displayed.
Steps:
1.
Click the Event tab.
The event information, including the time and detailed description will be displayed.
2.
To clear the event information, click the icon
Clear.
or right-click on the event log and then click
46
User Manual of NVMS-7000 v2.0
Chapter 5 E-map Management
Purpose:
The E-map function gives a visual overview of the locations and distributions of the installed cameras
and alarm input devices. You can get the live view of the cameras on the map, and you will get a
notification message from the map when alarm is triggered.
Click the
icon on the control panel,
or click View->E-map to open the E-map page.
E-map Page
1 Group List
2 Map Display Area
3 E-map Toolbar
5.1 Adding an E-map
Purpose:
An E-map needs to be added as the parent map for the hot spots and hot regions.
Steps:
1.
Open the E-map page.
2.
Select a group for which you want to add a map.
3.
4.
Click the icon
in the Map Display Area to open the map adding dialog box.
Input a descriptive name of the added map as desired.
5.
6.
Click the icon
and select a map file from the local path.
Click OK to save the settings.
Notes:
47
User Manual of NVMS-7000 v2.0

The picture format of the map can only be *.png, *.jpg or *.bmp.

Only one map can be added to a group.
The map added is displayed in the Map Display Area. Use the mouse wheel to zoom in or zoom out on
the map. You can click-and-drag the yellow window in the lower-right corner or use the direction
buttons and zoom bar to adjust the map area for view.
Click the button Edit Map or Map Preview in the E-map toolbar to enter the map editing mode or
map preview mode.
E-map Toolbar in Map Editing Mode:
E-map Toolbar in Map Preview Mode:
On the E-map page, the following toolbar buttons are available:
Modify Map
Modify the map information, including the map name and file path.
Delete Map
Delete the current map.
Add Camera
Add a camera as the hot spot on the map.
Add Alarm Input
Add an alarm input sensor as the hot spot on the map.
Add Hot Region
Add a map as the hot region on the current map.
Modify
Modify the information of the selected hot spot or hot region.
48
User Manual of NVMS-7000 v2.0
Delete
Delete the selected hot spot or hot region.
Clear Alarm Info
Clear the alarm information displayed on the map.
Back to Parent Map
Go back to the parent map.
5.2 The Hot Spot Function
Purpose:
The cameras and alarm inputs can be added on the map and are called the hot spots. The hot spots
show the locations of the cameras and alarm inputs, and you can also get the live view and alarm
information of the surveillance scenarios through the hot spots.
5.2.1 Adding Hot Spots
Adding Cameras as Hot Spots
Steps:
1.
Click the Edit Map button in the E-map toolbar to enter the map editing mode.
2.
3.
Click the icon
in the toolbar to open the Add Hot Spot dialog box.
Check the checkboxes to select the cameras to be added.
4.
Optionally, you can edit hot spot name, select the name color and select the hot spot icon.
5.
Click OK to save the settings. The camera icons are added on the map as hot spots and the icons
of added cameras changes from
to
in the group list. You can click-and-drag the camera
icons to move the hot spots to the desired locations.
You can also click-and-drag the camera icons from the group list to the map directly to add the
hot spots.
Adding Alarm Inputs as Hot Spots
Steps:
1.
Click the Edit Map button in the E-map toolbar to enter the map editing mode.
2.
Click the icon
in the toolbar to open the Add Hot Spot dialog box.
49
User Manual of NVMS-7000 v2.0
3.
Check the checkboxes to select the alarm inputs to be added.
4.
Optionally, you can edit hot spot name, select the name color and select the hot spot icon.
5.
Click OK to save the settings. The alarm input icons are added on the map as hot spots and the
icons of added alarm inputs changes from
to
in the group list. You can click-and-drag
the alarm input icons to move the hot spots to the desired locations.
You can also click-and-drag the alarm input icons from the alarm input list to the map directly to
add the hot spot.
5.2.2 Modifying Hot Spots
Purpose:
You can modify the information of the added hot spots on the map, including the name, the color, the
icon, etc.
Steps:
1.
Click the Edit Map button in the E-map toolbar to enter the map editing mode.
2.
Select the hot spot icon on the map and then click
in the toolbar,
or double-click the hot spot icon on the map to open the Modify Hot Spot dialog box.
3.
You can edit the hot spot name in the text field and select the color, the icon and the linked
camera or alarm input.
4.
Click OK to save the new settings.
To delete the hot spot, select the hot spot icon and click
in the toolbar.
50
User Manual of NVMS-7000 v2.0
5.2.3 Previewing Hot Spots
Steps:
1.
Click the Map Preview button in the E-map toolbar to enter the map preview mode.
2.
Double-click the camera hot spots, and you can get the live view of the cameras.
3.
If there is any alarm triggered, an icon
will appear and twinkle near the hot spot. Click the
alarm icon, and then you can check the alarm information, including alarm type and triggering
time.
Note: To display the alarm information on the map, the Alarm on E-map functionality needs to be set
as the alarm linkage action.
5.3 The Hot Region Function
Purpose:
The hot region function links a map to another map. When you add a map to another map as a hot
region, an icon of the link to the added map is shown on the main map. The added map is called child
map while the map to which you add the hot region is the parent map.
Note: A map can only be added as the hot region for one time.
5.3.1 Adding Hot Regions
Before you start:
Add another map to the group.
Steps:
1.
Click the Edit Map button in the E-map toolbar to enter the map editing mode.
2.
Select an added map as the parent map.
51
User Manual of NVMS-7000 v2.0
3.
4.
Click the icon
in the toolbar to open the Add Hot Region dialog box.
Check the checkbox to select the child map to be linked.
5.
Optionally, you can edit the hot region name, and select the hot region color and icon.
6.
Click OK to save the settings. The child map icons are added on the parent map as the hot regions.
You can click-and-drag the child map icons to move the hot regions to the desired locations.
5.3.2 Modifying Hot Regions
Purpose:
You can modify the information of the hot regions on the parent map, including the name, the color,
the icon, etc.
Steps:
1.
Click the Edit Map button in the E-map toolbar to enter the map editing mode.
2.
Select the hot region icon on the parent map and then click
in the toolbar,
or double-click the hot region icon to open the Modify Hot Region dialog box.
3.
You can edit the hot region name in the text field and select the color, the icon and the linked
child map.
4.
Click OK to save the new settings.
To delete the hot region, select the hot region icon and click
in the toolbar.
52
User Manual of NVMS-7000 v2.0
5.3.3 Previewing Hot Regions
Steps:
1.
Click the Map Preview button in the E-map toolbar to enter the map preview mode.
2.
Click the hot region icon to go to the linked child map.
3.
The hot spots can also be added on the hot regions.
4.
You can click the icon
You can also click the icon
in the toolbar to go back to the parent map.
in the toolbar to clear the alarm information.
53
User Manual of NVMS-7000 v2.0
Chapter 6 Log Management
Purpose:
The log files of the client software are stored on the local PC and can be searched for checking. 2 types
of log files are provided: client logs and server logs. The client logs refer to the log files of the client
and are stored on the local PC; the server logs refer to the log files of the connected devices and are
stored on the local device.
Click the
icon on the control panel to open the Log Search page.
Searching Log Files
Steps:
1.
Open the Log Search page.
2.
Select the log type. If Server Logs is selected, then click to specify the device for search.
3.
4.
Click the icon
to specify the start time and end time.
Click Search. The log files between the start time and end time will be displayed on the list.
You can check the operation time, description and other information of the logs.
Note: Up to 36000 items of logs can be displayed. Please narrow the time range or filter the log type
for search if there are too many log files.
54
User Manual of NVMS-7000 v2.0
Filtering Log Files
Purpose:
After searched out successfully, the log files can be filtered by the keyword or condition, and thus you
can find the logs as you want.
Steps:
1.
Click Log Filter or the icon
on the Log Search page to expand the Log Filter panel.
2.
Select Filter by Keyword, and then input keyword for filtering in the text field; or
select Filter by Condition, and then specify log information in the drop-down list.
3.
Optionally, you can click More… to filter the log files more accurately.
4.
Click Filter to start filtering. You can click Clear Filter the clear the filtering.
Backing up Log Files
Purpose:
The log files, including the client logs and server logs, can be exported for backup.
Steps:
1.
Select the log file from the list after searching out the log files.
2.
Click Backup Log to open the Backup Log dialog box.
3.
4.
Click the icon
and select a local saving path.
Click Backup to export the selected log file for backup.
You can click FileOpen Log File to check the information of the backup log files on local PC.
55
User Manual of NVMS-7000 v2.0
Chapter 7 Account Management and System
Configuration
7.1 Account Management
Purpose:
Multiple user accounts can be added to the client software, and you are allowed to assign different
permissions for different users if needed.
Click the
icon on the control panel,
or click Tool->Account Management to open the Account Management page.
Note: The user account you registered to log in the software is set as the super administrator.
Adding the User
Steps:
1.
Open the Account Management page.
2.
Click Add User to open the Add User dialog box.
3.
Select the user type from the drop-down list. 2 types of user accounts are selectable:
Administrator: The administrator account has all permissions by default, and can modify the
passwords and permissions of all operators and its own account.
Operator: The operator account as no permission by default and you can assign the permissions
manually. An operator can only modify the password of its own account.
4.
Input the user name, password and confirm password as desired.
5.
Check the checkboxes to assign the permissions for the created user.
6.
Optionally, you can click Default Permission to restore the default permissions of this user.
7.
Click Save to save the settings.
Notes:

A user name cannot contain any of the following characters: /\: *? “<> |. And the length of the
56
User Manual of NVMS-7000 v2.0
password cannot be less than 6 characters.

Up to 50 user accounts can be added for the client software.
Managing the User
Purpose:
After created successfully, the user account is added to the user list on the Account Management page.
You can edit or delete the information of the user accounts.
To edit the information of the user, select the user from the list, and click Edit User.
To delete the information of the user, select the user from the list, and click Delete User.
7.2 System Configuration
Purpose:
The general parameters, file saving paths, keyboard and joystick shortcuts, alarm sounds and Email
settings can be configured.
Click the
icon on the control panel,
or click Tool->System Configuration to open the System Configuration page.
57
User Manual of NVMS-7000 v2.0
Note: You can click Default Value to restore the defaults of all the system configurations.
7.2.1 General Settings
Purpose:
The frequently-used parameters, including the log expired time, view scale, etc., can be set.
Steps:
1.
Open the System Configuration page.
2.
Click the General tab to enter the General Settings interface.
3.
Configure the general parameters. For details, see Table 7.1 General Parameters.
4.
Click Save to save the settings.
Table 7.1General Parameters
Parameters
Descriptions
Log Expired Time
The time for keeping the log files, once exceeded, the files will be deleted.
View Scale
The view scale of the video in live view or playback. It can be set as Full
58
User Manual of NVMS-7000 v2.0
Screen, 4:3, 16:9 or Original Resolution.
Network Performance
Play Performance
Enable Screen Toolbar
The current network conditions. It can be set as Normal, Better or Best.
The play performance of the live video. It can be set as Shortest Delay, Real
Time, Balanced or Fluency.
Show the toolbar on each display window in live view or playback.
Display
Enable Auto-login
Prioritize the Playback
of Record Files on
Log in the client software automatically.
Play back the video files recorded on the storage server preferentially.
Otherwise, play back the video files recorded on the local device.
Storage Server
Resume Live View
Resume the latest live view status after you log in the client again.
Status
Auto-change Stream
Type
Auto Time Adjustment
Change the stream type automatically in live view according to the size of
the display window.
Adjust the time automatically at a specified time point.
7.2.2 File Saving Path Settings
Purpose:
The video files from manual recording, the captured pictures and the system configuration files are
stored on the local PC. The saving paths of these files can be set.
Steps:
1.
Open the System Configuration page.
2.
Click the File tab to enter the File Saving Path Settings interface.
3.
4.
Click the icon
and select a local path for the files.
Click Save to save the settings.
59
User Manual of NVMS-7000 v2.0
7.2.3 Keyboard and Joystick Shortcuts Settings
Purpose:
keyboard can be connected to the client and be used to control the PTZ cameras. You can set the
shortcuts of PC keyboard and USB joystick to get quick and convenient access to the commonly used
actions.
Steps:
1.
Select the COM port from the drop-down list if keyboard is connected.
2.
Select a certain function from the list.
3.
Double-click the item field under the PC Keyboard or USB Joystick column.
4.
Select the compound keys operation or USB joystick operation from the drop-down list.
5.
Click Save to save the settings.
7.2.4 Alarm Sound Settings
Purpose:
When the alarm, such as motion detection alarm, video exception alarm, etc., is triggered, the client
can be set to give an audible warning and the sound of the audible warning can be configured.
Steps:
1.
Open the System Configuration page.
2.
Click the Alarm Sound tab to enter the Alarm Sound Settings interface.
3.
Click the icon
4.
5.
Optionally, you can click the icon
Click Save to save the settings.
and select the audio files from the local path for different alarms.
for a testing of the audio file.
Note: The format of the audio file can only be *wav.
60
User Manual of NVMS-7000 v2.0
7.2.5 Email Settings
Purpose:
An Email notification can be sent when a system alarm occurs. To send the Email to some specified
receivers, the settings of the Email need to be configured before proceeding.
Steps:
1.
Open the System Configuration page.
2.
Click the Email tab to enter the Email Settings interface.
3.
Input the required information.
SMTP Server: Input the SMTP Server address.
Port: Input the communication port of Email service. The port is 25 by default.
User Name: Input the user name of the sender Email address.
Password: Input the password of the sender Email address.
Sender Address: Input the Email address of the sender.
Receiver 1—3: Input the Email address of the receiver. Up to 3 receivers can be set.
4.
Optionally, you can check the checkbox Enable SSL to increase the security of email sending.
5.
Optionally, you can click Send Test Email to send an email to the receiver for test.
6.
Click Save to save the settings.
61
User Manual of NVMS-7000 v2.0
Chapter 8 Forwarding Video Stream through
Stream Media Server
Purpose:
There is always a limit of the device remote access number. When there are many users wanting to get
remote access to the device to get the live view, you can add the stream media server and get the
video data stream from the stream media server, thus to lower the load of the device.
8.1 Adding the Stream Media Server
Before you start:
The stream media server application software needs to be installed and it is packed in the NVMS7000
software package. When installing the NVMS7000, check the checkbox Stream Media Server to
enable the installation of stream media server.
Steps:
1.
Click the shortcut icon
on the desktop to run the stream media server.
Note: You can also forward the video through the stream media server installed on other PC.
2.
Open the Device Management page and click the Server tab.
3.
Click Add New Device Type, select Stream Media Server and click OK.
4.
Click Stream Media Server on the list and then click Add Device.
You can add the stream media server in the following two ways:

Adding Stream Media Server Manually
Perform the following steps to add the stream media server manually:
1)
Select IP Address as the adding mode.
2)
Input the nickname and IP address of the stream media server. The default port value is
554.
3)

Click Add to add the stream media server to the client software.
Adding Stream Media Server by IP Segment
Perform the following steps to add the stream media server by IP segment:
1)
Select IP Segment as the adding mode.
2)
Input the start IP and end IP. The default port value is 554.
3)
Click Add to add the stream media server to the client software.
62
User Manual of NVMS-7000 v2.0
Notes: For one client, up to 16stream media servers can be added.
8.2 Adding Cameras to Stream Media Server to Forward
Video Stream
Purpose:
To get the video stream of a camera via stream media server, you need to connect the camera to the
stream media server.
Steps:
1.
Select the stream media server from the list.
2.
Click Configure to enter the Stream Media Server Settings interface.
3.
Select the cameras of which the video stream is to be forwarded via the stream media server.
4.
Click OK to save the new settings.
5.
Go the Main View page and start the live view of the cameras again. You can check the channel
number of the video stream forwarded through or sent from the stream media server.
Note: For one stream media server,up to 64 channels of video stream can be forwarded through it and
up to200 channels of video stream can be sent to clients from it.
63
User Manual of NVMS-7000 v2.0
Chapter 9 Decoding and Displaying Video on
Video Wall
The Video Wall module is only available when the decoding device is added to the client. It provides
the video decoding functionality, and the decoded video stream can be displayed on the Video Wall
for an attention-grabbing performance.
Click the
icon on the control panel,
or click View->Video Wall to open the Video Wall page.
9.1 Adding the Decoding Device
Purpose:
To display the video on the Video Wall, the decoding device needs to be added to the client.
Steps:
1.
Open the Device Management page and click the Server tab.
2.
Click Add New Device Type, select Decoding Device and click OK.
3.
Click Decoding Device on the list to enter Decoding Device Adding interface.
64
User Manual of NVMS-7000 v2.0
You can add the decoding device in the following ways:

By detecting the online devices, see Section 2.2.1 Adding Online Devices.

By specifying the device IP address, see Section 2.2.2 Adding Devices Manually.

By specifying an IP segment, see Section 2.2.3Adding Devices by IP Segment.

By IP Server, see Section 2.2.4Adding Devices by IP Server.
9.2 Configuring Video Wall Settings
Purpose:
After the decoding device is added successfully, the parameters of Video Wall need to configured for
video display.
Steps:
1.
Open the Video Wall page.
2.
Click Enter Video Wall Config to enter the Video Wall Configuration interface.
3.
There is a 3*3 video wall on the screen by default. You can add a new video wall if needed.
Perform the following steps to add a new video wall:
1) Click the icon
in the toolbar to open the Add Video Wall dialog box.
2) Input the nickname, the number of rows and columns of the video wall.
3) Click Add.
To modify the video wall, select the video wall, and click the icon
4.
in the toolbar.
To delete the video wall, select the video wall, and click the icon
in the toolbar.
Click-and-drag the decoding channel on the left-side list to the display window of video wall, to
65
User Manual of NVMS-7000 v2.0
connect them one-to-one correspondence. You can click
display window to release the connection.
in the upper-right corner of the
Notes:

Up to 4 video walls can be added to the client software.

The total number of the display windows on the video wall should be no more than 100.

The ranges of the row number and column number are both between 1 and 20.
9.3 Displaying Video on Video Wall
Purpose:
After the settings of the video wall are configured, the video stream from the cameras can be decoded
and displayed on the Video Wall.
Steps:
1.
Click Back to Operation Page to go back to the Video Wall Operation interface.
2.
Select the screen layout mode for the display window.
3.
Click-and-drag the camera from the left-side list to the display window on the video wall.
The video stream from the camera will be decoded and displayed on the Video Wall. Click the
icon
and you can get a preview of the video in the lower-right corner of the screen.
66
User Manual of NVMS-7000 v2.0
Troubleshooting
Live View
Problem:

Failed to get the live view of a certain device.
Possible Reasons:

Unstable network or the network performance is not good enough.

The device is offline.

Too many accesses to the remote device cause the load of the device too high.

The current user has no permission for live view.

The version of the client software is below the needed version.
Solutions:

Check network status and disable other not in use process on your PC.

Check the device network status.

Restart the device or disable other remote access to the device.

Log in with the admin user and try again.

Download the client software of the latest version.
Recording
Problem:

Local recording and remote recording are confused.
Solutions:

The local recording in this manual refers to the recording which stores the record files on the
HDDs, SD/SDHC cards of the local device.

The remote recording refers to the recording action commanded by the client on the remote
device side.
Playback
Problem:

Failed to download the record files or the downloading speed is too slow.
Possible Reasons:

Unstable network or the network performance is not good enough.

The NIC type is not compatible.

Too many accesses to the remote device

The current user has no permission for playback.

The version of the client software is below the needed version.
Solutions:

Check network status and disable other not in use process on your PC.

Directly connect the PC running the client to device to check the compatibility of the NIC card.

Restart the device or disable other remote access to the device.

Log in with the admin user and try again.

Download the client software of the latest version.
67
Download PDF