ST-9314
1 de 2
http://www.atmltd.com/instrument/st9314a_b_c.htm
MODEL NO.:ST-9314
POCKET SIZE(WATERPROOF) THERMOMETER
FUNCTIONS:
A ON/OFF, H/T, °F/°C, HIGH ALARM, LOW ALARM
B ON/OFF, °F/°C, MAX/MIN (°F/°C) MEMORY RECALLING,
HIGH ALARM, LOW ALARM
C ON/OFF, H/T, MAX/MIN MEMORY RECALLING, HIGH
ALARM, LOW ALARM
FEATURES:
RUBBERIZED ADJUSTABLE HANGER
RATED WATERPROOF TO IP67 STANDARDS
EASY-TO-READ JUMBO DISPLAY
AUDITABLE ALARM SETTING
SPECIFICATIONS:
MEASUREMENT RANGE:
-50°C ~ +150°C OR -58°F ~+302°F
-50°C ~ +200°C OR -58°F ~+392°F
-50°C ~ +300°C OR -58°F ~+572°F
RESOLUTION:
0.1° FOR -19.9° ~ +199.9°, OTHERWISE 1°
ACCURACY:
±1°C IN THE RANGE OF -30°C ~ +150°C
±1.8°F IN THE RANGE OF -22°F ~ +302°F
±1°C IN THE RANGE OF 151°C ~ +250°C, OTHERWISE MORE THAN ± 2°C
±1.8°F IN THE RANGE OF 303.8°F ~+482°F, OTHERWISE MORE THAN ± 4°F
AMBIENT TEMPERATURE FOR PLASTIC CASE:
-10°C ~ +50°C OR +14°F ~+122°F
BATTERY :
1 X 1.5V "A76" SIZE (LR44,G13) OR EQUIVALENT
INSTALLATION:
UNPACK THE THERMOMETER WITH CARE.
OPEN THE BATTERY DOOR. THEN INSTALL ONE "A76" SIZE (LR44, G13) OR
EQUIVALENT BATTERY INTO THE BATTERY COMPARTMENT AND CLOSE THE BATTERY
DOOR.
REMOVE PLASTIC PROBE SLEEVE. THE THERMOMETER IS NOW READY FOR USE.
REPLACE NEW BATTERY WHEN THE LOW BATTERY INDICATOR APPEARS ON THE
SCREEN.
OPERATIONS:
"ON/OFF" --- FOR POWER SWITCHING
"°F/°C" --- TO SELECT DESIRED TEMPERATURE UNIT.
"HOLD/TEST" --- PRESS TO RETAIN READING FOR RECORDING.
"MAX / MIN" --- PRESS ONCE TO RECALL MINIMUM TEMPERATURE TESTED. PRESS
AGAIN FOR MAXIMUM TEMPERATURE TESTED. TESTING MODE WILL RESTORE AFTER
3 SECONDS
24/04/2015 7:31
ST-9314
2 de 2
http://www.atmltd.com/instrument/st9314a_b_c.htm
PRECAUTIONS:
THE PROBE TIP SHOULD BE IMMERSED AT LEAST 10MM. INTO THE TESTED
SUBSTANCE TO OBTAIN THE BEST RESULTS.
REMOVE THE BATTERY FROM THE BATTERY COMPARTMENT IF THE
THERMOMETER WILL NOT BE USED FOR LONG DURATION OF TIME OR DURING
STORAGE.
THE THERMOMETER CANNOT BE USED OR PUT INSIDE ANY OVEN OR
MICROWAVE.
24/04/2015 7:31
Download PDF