TP-SW3G
DATA SHEET
PoE / Ethernet Extender
Features
 3 Gigabit Ports, Easy Plug and Play Operation
 Extends the range of PoE and Ethernet an additional
100 meters or more
 Compatible with IEEE802.3af and IEEE802.3at and
IEEE802.3at 4 Pair (60W)
 No Additional Power Supply is Required
 Built-in Surge Protection
 Automatic MDI/MDI-X Crossover
 Automatic Speed and Duplex Sensing
 Low Self Power and High Temperature Operation
 CE and FCC Certification
 Compact Desktop or Wall Mount Design and Compatible with DIN Rail Adapters
Applications
 Add another PoE and Data Port without running more Ethernet Cable
 Extend Ethernet and PoE an additional 100 meters per each TP-SW3G
Description
The TP-SW3G Power Over Ethernet (PoE) 3 Port Gigabit switches offered by Tycon Systems are fully automatic high
speed Ethernet switches with up to 30W of PoE power per port.
The unit accepts Gigabit data and power via PoE into the RJ45 “PoE In” port. The PoE In port is compatible with
IEEE802.3af, IEEE802.3at and IEEE802.3at 4 pair (60W). It can also accept 42-57VDC Passive PoE.
There are two fully compliant 802.3af/at Gigabit “PoE Out” ports. These ports are capable of up to 30W per port and
100m (330ft) distance.
Multiple TP-SW3G can be strung together to provide effective distances up to about 300m depending on loads. No
extra power is required as the units are powered over PoE.
The units are compatible with Category 5 or higher Ethernet cables. The RJ45 connectors are shielded and grounded
to the case. The units have 15kV surge protection on all Ethernet wires and are conformal coated for moisture
protection. They have a wide operating temperature range for outdoor and industrial applications.
TP-SW3G Pinout
RJ-45 PoE In (Data & Power)
RJ-45 PoE Out (Data & Power)
Pin
Symbol
Description
Symbol
Description
1
2
3
4
5
6
7
8
A+ / +Vdc
A- / +Vdc
B+ / -Vdc
C+ / +Vdc
C- / +Vdc
B- / -Vdc
D+ / -Vdc
D- / -Vdc
Data A+ / DC Power(-)
Data A- / DC Power(-)
Data B+ / DC Power(+)
Data C+ / DC power(+)
Data C- / DC power(+)
Data B- / DC Power(+)
Data D+ / DC power(-)
Data D- / DC power(-)
A+ / -Vdc
A- / -Vdc
B+ / +Vdc
C+
CB- / +Vdc
D+
D-/
Data A+ / DC Power(-)
Data A- / DC Power(-)
Data B+ / DC Power(+)
Data C+
Data CData B- / DC Power(+)
Data D+
Data D-
TP-SW3G
Page 2
Specifications
TP-SW3G
Ports
Transmission Speed
Connections
PoE Input Port
PoE Output Ports
PoE Output Power
POE Compatibility
POE Protections
Surge Protection
Self Consumption
LED’s
Switch Technology
Protocol
Flow Control
Data Transmission Rate
Address Table
Operating Temp
Operating Humidity (RH)
Storage Temperature
Dimensions (LxWxH)
Weight
Warranty
1 data/PoE input and 2 data/PoE outputs, automatic crossover and polarity
1000 Mbps (Gigabit) / 100 Mbps /10 Mbps Auto-negotiation
Shielded RJ45, Grounded to case
Vin 44VDC to 57VDC, PoE Pinout: 1,2(V-); 3,6(V+) and/or 7,8(V-); 4,5(V+)
Vout 42VDC to 55VDC, Pin assignment: V-(1,2), V+(3,6)
30W per port Maximum, 60W Total
IEEE802.3af (PoE), IEEE802.3at (PoE+), 802.3at 4 Pairs (60W) High PoE
Over Temperature, Over Current, Short Circuit
IEC61000-4-2 (ESD) ±15kV (air), ±8kV (contact)
IEC61000-4-4 (EFT) 40A (5/50ns)
< 1.5 Watt Typical
Link (Green On), Activity (Green Blinking ), PoE Detect (Yellow On)
Store and Forward
CSMA/CD
IEEE802.3x(full-duplex), Back Pressure(half-duplex)
148800pps ,14880pps
1K MAC, self-learning
-30 to +60°C (-22 to 140°F)
5% - 90% (non condensing)
-40 to +85°C (-40 to +185°F)
119 x 85 x 28mm (4.7 x 3.3 x 1.1”)
280g (9.9oz)
2 Years
Typical Application:
System Ordering:
TP-SW3G
3 Port 802.3af/at Gigabit PoE Switch – PoE / Ethernet Extender
For further information contact:
TP-SW3G Spec Rev 1 19-Sep-16
Tyconsystems.com
Specifications Subject to Change Without Notice
14641 S 800 W Ste A
Bluffdale, UT 84065
PH: 801-432-0003
FAX: 801-618-4220
Download PDF