Simply advanced
Unbuffered Memory Module
Data Sheet
AXT760UD00-19D
This data sheet describes the features and specification of the AENEON™ XTUNE™ 1GB DDR2 1066 MHz
overclocking memory module family.
XTUNE™ series is the AENEON™ solution for Enthusiastic Gamers striving for highest system performance while
experiencing a fast, stable and reliable system operation.
AENEON™, with the XTUNE™ series, is the first company that supplies High Performance Memory Modules
without overstressing the DRAM components with higher supply voltage. This will be paid back in higher lifetime
and reliability.
AENEON™ XTUNE™ series supports the EPP (Enhanced Performance Profile) standard. EPP provides a
Plug&Play solution and eases the use of overclocking modules significantly since the overclocking features can
be read out by all motherboards1) also supporting EPP. As a result the system parameters are automatically
adjusted to the overclocking parameters supported by the memory module. The most popular motherboards in the
market supporting EPP are NVIDIA SLI 680i platforms.
Description
The 1GB single module can be organized as
■
128M x 64-bit DDR2-1066 based on 16 components 64M x 8-bit DDR2 FBGA components.
The single module is tested to run at 1066 MHz at a latency timing of 5-5-5-15 and 800 MHz at a latency timing of
4-4-4-12 at the standard DDR2 voltage value of 1.8 V.
The Dual Channel Kit is coming with two identical modules tested together in DUAL CHANNEL MODE at
1066MHz at a latency timing of 5-5-5-15 on several platforms based on the NVIDIA 680i and Intel 965 chip set.
Package Variants
The AXT760UD00-19D comes in the following configurations:
Product Type
Density
General
AXT760UD00-19DM97-K(n)-2G
2x1GB (2GB)
Dual Channel Kit, n = regional versions
Features
■
■
■
■
■
■
1)
1GB Memory Modules
Overclocking Speed Grade DDR2-1066MHz CL5 at 1.8 V
Overclocking Speed Grade DDR2-800MHz CL4 at 1.8 V
240-Pin Dual Inline Memory Module (DIMM) with Gold Contact
Highest Quality Heat Spreader for preventing critical operating temperatures
Supports Industry Standard 800 MHz 5-5-5-15 (for non Overclocking operation)
Motherboard and BIOS have to support the EPP feature. In some Motherboard Model, EPP feature, has to be enabled in the BIOS
settings. Refer to the Motherboard documentation for further details. All the other overclocking capable motherboards have to be manually
configured using the parameters shown in the table.
AENEON™ Data Sheet
A Qimonda AG Brand
1
Revision 1.03, 2007-07
Doc. # 03132007-BPEE-VINK
Simply advanced
Unbuffered Memory Module
Data Sheet
Specification
Parameter
Standard
Overclocking
Clock cycle time tCK for CL5
2.5 ns (min.) / 8 ns (max.)
1.87 (min.) / 8 ns (max.)
Activate to read/write delay tRCD
12.5 ns (min.)
9.35 ns (min.)
Row cycle time tRC
57.5 ns (min.)
37.4 ns (min.)
Refresh row cycle time tRFC
105 ns (min.)
105 ns (min.)
Row active time tRAS
45 ns (min.) / 70.000 ns (max.)
28.05 ns (min.) / 70.000 ns (max.)
Single power supply VDD = VDDQ
1.8 V ± 0.1 V
Operating power IDD0
0.7 W (max.)
Module dimensions L x W x H
133.35 mm x 30.0 mm x 4.0 mm (max.)
5.25" x 1.18" x 0.16" (max.)
All Rights Reserved.
Attention please!
The information herein is given to describe certain components and shall not be considered
as a guarantee of characteristics. Terms of delivery and rights to technical change reserved.
We hereby disclaim any and all warranties, including but not limited to warranties of noninfringement, regarding circuits, descriptions and charts stated herein.
1. A failure of the AENEON Products can reasonable be expected to –directly or indirectly–
a. Have a detrimental effect on such Critical Systems in terms of reliability, effectiveness
or safety; or
b. Cause the failure of such Critical Systems; or
2. A failure or malfunction of such Critical Systems can reasonably be expected to
–directly or indirectly–
a. Endanger the health or the life of the user of such Critical Systems or any other
person; or
b. Otherwise cause material damages (including but not limited to damages or serious
injury to life or property, whether tangible or intangible).
Warnings
Under no circumstances may Qimonda AG products of the brand AENEON ("Aeneon
Product(s)") be used in any applications, devices or systems that are safety critical or serve
the purpose of supporting, maintaining, sustaining or protecting human life (such
applications, devices and systems collectively referred to as "Critical Systems"), if
AENEON™ Data Sheet
A Qimonda AG Brand
2
Revision 1.03, 2007-07
Doc. # 03132007-BPEE-VINK