2 0 1 1
PRODUCT GUIDE
F E B R U A R Y
• SMART BIAS-T
P/N : IT-127X006
DESCRIPTIONS
A bias “T” is used to insert DC power into an
AC signal to power remote antenna amplifiers
or other devices. It is usually positioned at the
receiving end of the coaxial cable to pass DC
power from an external source to the coaxial
cable running to powered device.
device This Bias
Bias-T
T is
used to DC feeding of devices such as the
Tower Mounted Amplifier (TMA) Remote
Electrical Tilt (RET) systems. Furthermore, the
Bias-T has an AISG 2.0 modem integrated that
converts the 2.176 MHz on/off shift keying
signal (OOSK) to RS485 communication.
• AISG 2.0
2 0 Protocol Compliant
• Wide Band Usage
• Lighting Protected
SPECIFICATIONS
Frequency Range
CHARACTERICSTICS
698 – 2690 MHz
Return Loss Port 1 & 2
-20 dB Max.
Insertion Loss Port 1 & 2
0.2 dB Max.
Nominal Impedance Port 1 & 2
Resistance RS485A & RS485B
Capacitance RS485A & RS485B
Time delay
IM3, 2x 20W
Power Consumption
DC Current
50 Ohms
1 KOhms Min.
1 nF Min.
30 ns Max.
-110 dBm Max.
2 W Max.
1 Amp. Max.
Head Office & Factory - Location : Incheon-City, Korea Tel : +82-32-816-1456 E-mail : sales@innertron.com
Copyright ⓒ 2010. Innertron, Inc. All rights Reserved
2 0 1 0
PRODUCT GUIDE
M A R C H
• DUAL DIRECTIONAL COUPLER
P/N : IT-126K001
DESCRIPTIONS
A coupler couples part of the transmission
power in a transmission line by a known
amount out through another port, often by
using
g two transmission lines set close enough
g
together such that energy passing through one
is coupled to the other.
• Low Intermodulation
• Low Insertion Loss
• 870 – 2170MHz
• GSM-R, GSM, DCS, TDMA, PCS, UMTS
CHARACTERICSTICS
SPECIFICATIONS
Frequency Range(J1- J2)
Insertion Loss
Return Loss
Frequency Range(J1–J3)
Coupling Value
Directivity
Frequency Range(J2–J4)
Coupling Value
Directivity
Passive IM
(2-Ton@43dBm/tone)
Ingress Protection
870 ~ 2170MHz
0.1dB Max.
20dB Min.
J1 – J2(Thru)
J1 - J3(870 ~ 960MHz)
S21 : Coupling
J1 - J3(870 ~ 960MHz)
S21 : Isolation
J2 – J4(1710 ~ 2170MHz)
S21 : Coupling
J2 – J4(1710 ~ 2170MHz)
S21 : Isolation
Passive IM
870 ~ 960MHz
30.0 ± 0.4dB
20dB Min.
1710 ~ 2170MHz
30.0 ± 0.5dB
20dB Min.
-163dBc Min.
IP 67
Head Office & Factory - Location : Incheon-City, Korea Tel : +82-32-816-1456 E-mail : sales@innertron.com
Copyright ⓒ 2010. Innertron, Inc. All rights Reserved
2 0 1 0
PRODUCT GUIDE
• HYBRID COMBINER
P/N
DESCRIPTIONS
Hybrid Combiner is a 3dB high power
hybrid with an integral high performance
low PIM termination. The PIM specification
is 155dBc with two (2)+43dBm inputs.
Hybrid combiner can be used to combine
any
two
signals
in
the
band
without
interaction of the signals. This
unit is
intended for indoor or outdoor environment
applications.
The
frequency
range
can
cover PCS & AWS with rated p
power of 50W
at each of two inputs.
CHARACTERICSTICS
SPECIFICATIONS
Frequency Range
Return Loss
1710~2200MHz
18dB Min.
Hybrid Imbalance
0.5dB Max.
Insertion Loss
3.5dB Max.
PIMD (2x43dBm)
155dBc Min.
Input Power
50W
Ingress Protection
IP65
Temperature
p
Range
g
Connectors
M A R C H
-40 ~ +60℃
7/16 DIN Female
Head Office & Factory - Location : Incheon-City, Korea Tel : +82-32-816-1456 E-mail : sales@innertron.com
Copyright ⓒ 2010. Innertron, Inc. All rights Reserved
: IT-125L001
2 0 1 0
PRODUCT GUIDE
A P R I L
• TOWER MOUNTED AMPLIFIER
TMA 900 (25M)
P/N : IT-112C-002
DESCRIPTIONS
TMA is Dual duplex to allow on TMA one
transmission cable for both Tx and Rx. LNA
(Low Noise Amplifier) in the Rx path is Balanced
type. It contains alarm circuit to check LNA’
p
cable loss from antenna
status. To compensate
to BTS, TMA exhibits low NF (Noise Figure) and
high IP3 (3rd Order Intercept Point).
 LOW INSERTION LOSS
 LOW NOISE & HIGH IP3
 INCLUDE LIGHTNING PROTECTION (ALL Port)
 INDOOR OR OUTDOOR APPLICATIONS
BLOCK DIAGRAM
SPECIFICATIONS
Frequency Band
Bandwidth
TX Insertion Loss
Tx Return Loss
RX Gain
RX Gain Ripple
By-pass mode
Rx Return Loss
Rx 890~915 MHz
Tx 935~960 MHz
25 MHz
0.4dB, typical.
18 dB, Min.
12± 1.0dB
± 0.5dB (0.3)
-2.3dB (1.8)
18 dB, Min.(Normal)
15 dB, Min(By-pass)
Noise Figure
1.7dB (1.5) typ.(2.0dB @Temp.)
(90% of BW in the center)
OIP3
P1dB
PIMD @2-tone * 20W
Input Power (Avg. / peak)
DC Supply
Alarm
IP rating
Lightning protection
Connectors
Size
Weight
Operating Temperature
+23dBm min.(1tone=0dBm)
+12dBm min.
160dBc
200W / 2kW
+12Vdc / 120mA typ.
Alarm1 220 mA, ±25mA
Alarm2 320 mA, ±25mA
IP67
5 kA, 8/20 μs pulse
7/16 Din (Female)
(
)
407.5 (313.5) X 225 X 117.5 (94.5)
(Including Bracket)
Approximate 7.5kg
-40℃∼+60℃
Head Office & Factory - Location : Incheon-City, Korea Tel : +82-32-816-1456 E-mail : sales@innertron.com
Copyright ⓒ 2010. Innertron, Inc. All rights Reserved
2 0 1 0
PRODUCT GUIDE
M A Y
• EGSM/DCS DUAL BAND REPEATER
P/N : IT-109J-002
DESCRIPTIONS
The Innertron EGSM/DCS Dual Band Repeater
is idea for indoor coverage extension applied to
GSM900/DCS1800
cellular
communication
systems. It can boost signal up to 65dB and
drive RF output power up to 10dBm. It is a very
effective and cost effective solution for indoor
coverage application.
• Power Overload Protection
• Optimized Gain and Maximized Performance
• Exceptional Coverage – Low NF
• Applicable to CDMA PCS GSM DCS
• High Reliability
• Design to Increase Signal Strength
OUTLINE DRAWING
SPECIFICATIONS
EGSM900
p
Uplink
Frequency
Gain
Noise Figure
Max. Output
Power
Max. Input
Power
G i Fl
Gain
Flatness
Return Loss
ALC Level
880915MHz
DCS1800
Downlink
Uplink
p
Downlink
92517101805960MHz 1785MHz 1880MHz
65dB
Top
8dB Max
+10dBm
-35dBm (Auto Shutdown @ Overpower)
TBD
10dB (min.)
+11dBm
ALC
Level Range
20dB
Power Delay
5 Sec
Supply DC
3.5V
Power
Consumption
TBD
I/O Connecter
SMA(F)
Input
Impedance
50 Ohm
Bottom
Head Office & Factory - Location : Incheon-City, Korea Tel : +82-32-816-1456 E-mail : sales@innertron.com
Copyright ⓒ 2010. Innertron, Inc. All rights Reserved
2 0 1 0
PRODUCT GUIDE
J U L Y
• CIB DUPLEXER
P/N : IT-127X001
DESCRIPTIONS
CIB Duplexer
• Low Insertion Loss
• Small Size, Low Spurious
• Wide
Wid Operating
O
ti
T
Temperature
t
R
Range
• Customization available
• High reliability
• Very good PIMD
• Indoor & Outdoor Application
• Fully RoHS Compliant
SPECIFICATIONS
Frequency Band (800MHz)
CHARACTERICSTICS
810~960MHz
F
Frequency
B
Band
d (2GH
(2GHz))
1920 2170MH
1920~2170MHz
Insertion Loss (800MHz)
0.1dB Max.
Insertion Loss (2GHz)
0.15dB Max.
VSWR (800MHz / 2GHz)
Rejection(800MHz)
Rejection(2GHz)
Impedance(800MHz /2GHz)
PIMD (800MHz)
Impedance(800MHz /2GHz)
Connector Type
1.2 Max.
60dB Min@1920~2130MHz
65dB Min@815~925MHz
50 Ohms
-103dB Min
50 Ohms
RF Port 7/16 Female
MTBT
10 Million Hours
Safety
EN 60 950
Environmental
Ingress Protection
ETS 300 019
IP67
Head Office & Factory - Location : Incheon-City, Korea Tel : +82-32-816-1456 E-mail : sales@innertron.com
Copyright ⓒ 2010. Innertron, Inc. All rights Reserved
2 0 1 0
PRODUCT GUIDE
N O V E M B E R
• CROSS COMBINER (DIPLEXER)
P/N : IT-125N001
DESCRIPTIONS
Innertron Combiner is a two input
Diplexer which allows combination and
separation of the signals in each wireless
band. The inputs are well isolated and
have minimal insertion loss over their
respective frequency bands to minimize
band inter-reaction. The Combiner is
designed using passive, proprietary
techniques which minimize cost and size.
• Low Insertion loss & Low IMD
• High Power Solution
• Customization Available
CHARACTERICSTICS
SPECIFICATIONS
Low Band
Parameter
Specification
Low Band
High Band
Frequency
1710
- 2170 MHz
2300
- 2690 MHz
Insertion Loss
0.2 dB Max.
0.2 dB Max.
20dB Min.(Common Port.)
R t
Return
L
Loss
Isolation
20dB Min.
(Low Port.)
20dB Min.
(High Port.)
High Band
Low Band
50 dB Min.
Passive IM
-117 dBm Max.
(2-Tone@43dBm/tone)
RF
Connectors
DIN 7/16 Female, Long Barrel
Head Office & Factory - Location : Incheon-City, Korea Tel : +82-32-816-1456 E-mail : sales@innertron.com
Copyright ⓒ 2010. Innertron, Inc. All rights Reserved
2 0 1 0
PRODUCT GUIDE
N O V E M B E R
• CROSS COMBINER (TRIPLEXER)
P/N : IT-125K001
DESCRIPTIONS
Innertron Combiner is a three input
Triplexer which allows combination and
separation of the signals in each wireless
band. The inputs are well isolated and have
minimal insertion loss over their respective
frequency bands to minimize band interreaction. The Combiner is designed using
passive, proprietary techniques which
minimize cost and size.
CHARACTERICSTICS
Low Band
• Low Insertion loss & Low IMD
• High Power Solution
• Customization Available
SPECIFICATIONS
Parameter
Frequency
Specification
Low Band
Mid Band
High Band
1710 1880 MHz
1920 2170 MHz
2300 –
2690 MHz
0.3 dB Max.
0.2 dB Max.
Insertion Loss 0.3 dB Max.
Mid Band
20dB Min.(Common Port.)
etu Loss
oss
Return
20dB Min.
(Low Port.)
20dB Min.
(Low Port.)
20dB Min.
(High Port.)
300w/3kW
300w/3kW
200W/2kW
Isolation
50 dB Min.
50 dB Min.
50 dB Min.
Passive IM
-117 dBm Max. (2-Tone@43dBm/tone)
Power
(Avg./Peak)
RF Connector
High Band
DIN 7/16 Female, Long Barrel
Head Office & Factory - Location : Incheon-City, Korea Tel : +82-32-816-1456 E-mail : sales@innertron.com
Copyright ⓒ 2010. Innertron, Inc. All rights Reserved
2 0 1 0
PRODUCT GUIDE
N O V E M B E R
• HIGH PASS FILTER
P/N : IT-114A001
DESCRIPTIONS
Innertron High Pass Filter covers the
frequency range from 2400MHz to
8000MHz. It includes outstanding
performance and low insertion loss
by using special design techniques.
CHARACTERICSTICS
-25℃
• Low Insertion Loss
• Customization Available
SPECIFICATIONS
Parameter
Band Pass
Insertion Loss
Return Loss
Attenuation
Passive IMD
Specification
+65℃
65℃
2400~8000 MHz
1.5dB Max.
14.0 dB Min.
30 dB Min.
+25℃
136~512MHz
-105dBm
Head Office & Factory - Location : Incheon-City, Korea Tel : +82-32-816-1456 E-mail : sales@innertron.com
Copyright ⓒ 2010. Innertron, Inc. All rights Reserved
2 0 1 0
PRODUCT GUIDE
N O V E M B E R
• 6WAY DIVIDER
P/N : IT-124N004
DESCRIPTIONS
Innertron 6-way dividers cover the
frequency range from 700MHz to
2700MHz.
It includes outstanding amplitude and
low insertion loss,
loss and power handling
capability of up to 5 Watts at the
common port by using special design
techniques.
• Customization Available
• Minimal Insertion Loss
• High Isolation
• Power Rating of 5 Watts
CHARACTERICSTICS
SPECIFICATIONS
Insertion Loss,
Loss Return Loss
Parameter
Frequency
Specification
700~2700MHz
Insertion Loss
9.0dB Max.
Amplitude
Balance
0.8dB Max.
VSWR(All Port)
1.4 : 1 Max.
Isolation
Isolation
20dB Min.
Input Power
5W(Avg.)
Head Office & Factory - Location : Incheon-City, Korea Tel : +82-32-816-1456 E-mail : sales@innertron.com
Copyright ⓒ 2010. Innertron, Inc. All rights Reserved
2 0 1 0
PRODUCT GUIDE
N O V E M B E R
• DUAL BAND DIPLEXER
P/N : IT-103K007
DESCRIPTIONS
Innertron Combiner is a two input Diplexer
which allows combination and separation of
the signals in each wireless band. The inputs
are well isolated and have minimal insertion
loss over their respective frequency bands to
minimize band inter-reaction. The Combiner
is designed using passive, proprietary
techniques which minimize cost and size.
• Low Insertion loss & Low IMD
• High Power Solution
• Customization Available
CHARACTERICSTICS
SPECIFICATIONS
BPF Band
Low Band 824 MHz ~ 2170 MHz
0.25 dB, max. @ 800MHz
Insertion Loss
0.25 dB, max. @ 900MHz
Insertion Loss,
Loss Return Loss
0.5 dB, max. @ 1800MHz
0.5 dB, max. @ 2100MHz
Return Loss
Isolation
Avg. Input Power
18 dB, min.
45dB, min. (Port2-1)
150W @ Port 1
High Band (2400 MHz ~ 2500 MHz)
Insertion Loss
0.5 dB, max.
Return Loss
20 dB, min.
Isolation
PIMD
Avg. Input Power
Connector
45dB, min. (Port 2-1)
Isolation
-150 dBc for two 20W carriers
150 W @ Port 2
N-J
Operating Temp.
-10℃ ~ +60℃
Relative Humidity
0 ~ 95%
Protection
BRF Band
IP67
Head Office & Factory - Location : Incheon-City, Korea Tel : +82-32-816-1456 E-mail : sales@innertron.com
Copyright ⓒ 2010. Innertron, Inc. All rights Reserved
2 0 1 1
PRODUCT GUIDE
J A N U A R Y
• Combiner Box POI-0804
DESCRIPTIONS
Innertron Combiner Box has been designed
for in-building system. Providing all outputs
are utilized, the total loss for separate path
is less than 1 dB by using of 4x4 Low Band
& 4x4 High Band Hybrid Combiner and 4
Diplexers.
• 8 Inputs to 4 Combined Outputs
• Secured PIM, and Low Loss
• Customization Available
CHARACTERICSTICS
1. LOW IN1
2. LOW IN2
3. LOW IN 3
4. LOW IN 4
SPECIFICATIONS
Parameter
Specification
Inputs L1 to L4
698-960 MHz, Low Band
Inputs H1 to H4
Input Isolation, dB
Between Bands
1710-2700 MHz, High Band
Within Low Band : 24 typ., 22dB min.
Within High Band : 22 typ., 20 dB min.
>55 dB
Input Return Loss
>19dB (>21 dB typical)
Coupling (In-Out)
(In Out)
6 5 ± 0.8
6.5
0 8 dB (all paths)
Power per input
<60W avg., 3 kW peak
Total power in
Impedance
Environment
PIM (Intermod)
Finish
Weight
Insertion Loss,
Loss Return Loss
<200 W average
50 Ω nominal
-15℃ to +65℃, Indoor
5. High IN1
6. High IN2
Isolation
7. High IN3
<-142 dBc (+43dBm x2)
Housing: RoHS coated aluminum
Connectors: Triplate, N
22Ibs (10 kg) nominal
Head Office & Factory - Location : Incheon-City, Korea Tel : +82-32-816-1456 E-mail : sales@innertron.com
Copyright ⓒ 2010. Innertron, Inc. All rights Reserved
8. High IN4
Download PDF

advertising