Maximum response speed 3m/s Maximum resolution 50nm and

Maximum response speed 3m/s
Maximum resolution 50nm and
±5µm accuracy
Incremental type
Separate type
simple architecture
IP65 protection against
dust and water
Space-saving small head
W33×D16×H8[mm](Actual size)
Magnescale Co., Ltd.
Easy to check signal
with LED display
製品仕様・型名
Specifications
Model name
PQ10 head
SQ10 scale
MQ10 interpolator
□ □ □ □ A (Scale)
PQ11 head with interpolator
Reference point position Distance from left end (mm)
20 ˜ 3,800mm
Effective length
Effective length (cm)
±5μm (when effective length is less than 1m)
±10μm (when effective length is from 1m to 3m)
±15μm (when effective length is more than 3m)
Accuracy
(at 20℃)
Resolution
PQ10-
☆ A (Head)
0.05/0.1/0.5/1μm/0.048828μm (Only Yaskawa Electric Serial interface)
Serial interface
3m/s
Minimum phase difference(ns)
50
150
100
200
0.6
0.2
0.3
0.2
1.2
0.4
0.6
0.3
3.0
2.5
3.0
1.9
3.0
3.0
3.0
3.0
[m/s]
Maximum
response
speed
A/B phase output
0.05
0.1
0.5
1.0
Resolution
(μm)
Operating temperature
0 to 50℃
Vibration resistance
196m/s 2 (50Hz ˜ 2000Hz)
Impact resistance
980m/s 2 (11ms)
IP60
Power supply voltage range
-
DC5V±5%
Maximum
consumption current
-
1.3W
8g (excludes cable)
Cable length by a 10cm unit (07, 17, 27, 37)
M Q 1 0 - △ □ A ◆ ○ (Interpolator)
Type Reference point output format
A A phase 1 period
B When both A phase and B phase are at a high level
Minimum phase difference See Table 1
Communication protocol See Table 2
IP65/IP60
IP67
(Effective length:mm×0.22)+8g
A: IP60, B: IP65
Resolution A:0.05, B:0.1, C:0.5, D:1μm
L:0.048828μm (Only Yaskawa Electric)
Protective design grade
Mass
Model : S Q 1 0 - A
name
PQ11-
△ □ ☆ ◆ ○
(head with interpolator)
Reference point output format(Only A/B phase)
Minimum phase difference See Table 1
120g (excludes cable)
A: IP60, B: IP65
Various serial interface or A/B phase output
Output signal
○ LED display
Resolution A:0.05, B:0.1, C:0.5, D:1μm
L:0.048828μm (Only Yaskawa Electric)
○ A/B phase output Reference point output format
Communication protocol See Table 2
A phase
Cable length by a 10cm unit (10, 20, 30, 40)
B phase
Items
ORIGIN
ALARM
color
Lighting conditions
Red
When an alarm occurs
Green
Appropriate level
Orange When passing reference point
HIGH
Yellow
LOW
Orange
FINE
Table 1: Minimum phase difference (ns)
Model name
A
B
C
D
(A)
A phase 1 period
Excessive level
Shortage level
(B)
When both
A phase and
B phase are
at a high level
Table 2 : Communication protocol
B
D
F
G
H
P
M
Phase difference
50
100
150
200
Mitsubishi Electric/2-wire
Mitsubishi Electric/4-wire
Yaskawa Electric/Without hall sensor
Yaskawa Electric/With hall sensor
Panasonic
A/B phase output
Magnescale protocol
Dimensions
SQ10 series
(Scale unit)
PQ11 series
(Head with interpolator)
A
Cable length
12
Φ11
21
1.2
1
0.145
(Double-sided
tape thickness)
Effective length mark
(20)
Effective length
38.6
46
55
Origin mark
20
Full length= Effective length + 40
97
115
1.5
35
33
(43)
Center mark
MQ10-GLA
(Yaskawa Electric/With hall sensor )
300
Cable length
19
19
2xΦ4.5 hole
97
115
10
3.2
300
Cable length
Hall sensor input connector
1.2
1.2
9
9
1.5
12
φ11
10
38.6
46
55
12
Φ11
300
Cable length
Φ4.7
MQ10 series
(Interpolator unit)
1.2
3.2
9
Cable length
28
(Φ14.7)
2.5
8
2.5
16
11
2-M3 depth 5
10
Connecto : HR10A-10P-12P
(Φ4.7)
PQ10 series
(Head unit)
19
2xΦ4.5 hole
Φ4.7
Effective length mark
A section
detail
10
To use this product safely, please read the instruction manual carefully and thoroughly prior to usage. •Magnescale reserves the right to change products and specifications without prior notice.
Magnescale Co., Ltd.
Headquarters
: 45 Suzukawa, Isehara-shi, Kanagawa 259-1146, Japan TEL.+81 (0)463 92 1011 FAX.+81 (0)463 92 1012
Magnescale Americas Inc.
: 5740 Warland Drive, Cypress, CA 90630, USA
Service & Parts
: 45 Suzukawa, Isehara-shi, Kanagawa 259-1146, Japan TEL.+81 (0)463 92 2132 FAX.+81 (0)463 92 3090
International Sales Department : 45 Suzukawa, Isehara-shi, Kanagawa 259-1146, Japan TEL.+81 (0)463 92 7971 FAX.+81 (0)463 92 7978
Magnescale Europe GmbH
: Antoniusstrasse 14, 73249 Wernau, Germany
http://www.magnescale.com
TEL.+1 (562)594 5060 FAX.+1 (562)594 5061
TEL.+49(0)7153 934 291 FAX.+49(0)7153 934 299
The contents of this literature are as of Mar. 2016
Download PDF

advertising