IMAGETEAM™ 4710ESD
Hand Held or Fixed Mount 2D Image Readers
for ESD-Sensitive and Clean Room Applications
The HHP IMAGETEAM™ (IT) 4710ESD 2D Image
Readers are high performance readers of high
density linear (1D), stacked (PDF417), and matrix
(2D) codes, that have been designed specifically for
the stringent requirements found in clean room
assembly of sensitive electronic components. With a
clean room rating of 100, ESD-resistant labeling, low
particulation and contamination plastics, and ESDresistant cables, the IT4710ESD readers are the
most suitable hand held 2D image reader for ESDsensitive and clean room environments today.
Together with our IT3800ESD Hand Held Linear
Imager, HHP offers the most complete line of ESDresistant readers.
Features
Supports All Popular 2D Symbologies - IT4710ESD supports
all popular matrix and stacked linear symbologies:
MaxiCode, Data Matrix, QR, and PDF417. Additional
symbologies will be added as emerging codes are approved
by AIM.
Clean Room Ready - Cleaned and triple-bagged for class
100 environments.
ESD Labels - Labels are located either behind the optically
coated, grounded, conductive reader window inside the
cable well, or are manufactured from conductive material and
attached with conductive adhesive.
Low Particulation and Contamination - The housing material
is slough-resistant and provides excellent electrostatic and
grounding with low particulation. All labels on the outside of
the reader are located far from the front of the reader.
ESD-Resistant Cables - Stainless steel, grounded cables,
which eliminate one more source of electrostatic build up,
are available for both true RS-232 and wedge interfaces.
Omni-Directional Scanning - The video technology basis for
the IT4710ESD means it can offer omni-directional scanning,
even on linear codes, greatly simplifying operator training
and increasing productivity.
Auto-discriminates Between Supported Symbologies and
Fonts - Reads all major linear, stacked linear, and matrix bar
codes, as well as machine readable fonts used in Optical
Character Recognition (OCR).
2D Print Quality Assessment (PQA) - An easy and
inexpensive approach to providing test results useful for 2D
bar code symbol process control, and improvement of the
overall 2D data acquisition system.
Internal components of the IT4710ESD 2D Image
Reader are isolated from the conductive path formed
by the case, output connector shield, and special
shielded cable with drain wire. The 2D Image Reader
is rated for discharges up to 15kV without damage.
All materials are tested using the methods described
in ASTM D257, Standard Test Methods for Conductance of Insulating Materials. The surface resistivity
is rated at less than 10E5 ohms/square. Triboelectric
residual charge measured with a no-contact electrostatic field meter is less than 5 volts on any surface.
The IT4710ESD 2D Image Reader provides omnidirectional and auto-discrimination decoding for
symbologies, such as Data Matrix, PDF417, QR,
Aztec, Code 39, Code 128, Interleaved 2 of 5,
Codabar, UPC, and EAN, as well as RSS-14,
composite codes, postal codes, and MaxiCode.
Additional symbologies will be added as required.
Two focal point models are available: the IT4710E-HD
(2 inch (5.1 cm) focal point) which is ideal for reading
matrix (2D) symbols that have cell sizes less than 10
mil (.010 in.), and the IT4710E-HD10 (3 inch (7.6 cm)
focal point) for reading matrix (2D) symbols with cell
sizes greater than 10 mil (.010 in.). Both are excellent readers of high density linear (1D) symbols.
To learn how the IT4710ESD can work for you,
contact us at any of the locations listed on the back
or visit us at www.hhp.com.
Upgrade your image.
IMAGETEAM™ 4710ESD Specifications
Performance
4710E-HD Focal Point:
2 inches (5.1 cm) from nose
4710E-HD10 Focal Point:
3 inches (7.6 cm) from nose
HD Working Range:
(typical)
Near
Far
6 pt OCR
20 cpi
2 in. (5.1 cm)
3.5 in. (8.9 cm)
HD10 Working Range:
(typical)
10 mil QR
(.025 cm)
10 mil Data Matrix
(.025 cm)
5 mil Linear
(.013 cm)
2.0 in. (5.1 cm)
4.0 in. (10.2 cm)
2.2 in. (5.6 cm)
3.8 in. (9.6 cm)
2.75 in. (7.0 cm)
3.75 in. (9.5 cm)
Near
Far
Rotational Sensitivity:
6.6 mil QR
(.017 cm)
1.7 in. (4.3 cm)
2.45 in. (6.2 cm)
6.6 mil Data Matrix
(.017 cm)
1.7 in. (4.3 cm)
2.45 in. (6.2 cm)
4 mil Linear
(.01 cm)
1.6 in. (4.6 cm)
2.7 in. (6.9 cm)
360o
Viewing Angle:
+45o
Ambient Light:
Total darkness to 100,000 lux (full sunlight)
Aiming:
660nm LEDs provide bright aiming line
Symbologies
2 Dimensional:
MaxiCode, PDF417, MicroPDF417, Aztec, Aztec Mesa, Data Matrix, QR Code, Code 49, UCC Composite, Snowflake*, Vericode*,
Dataglyphs*
Linear:
Code 39, Code 128, Codabar, UPC, EAN, I 2 of 5, RSS-14, BC 412*, Code 93, Codablock
* available to licensed users only
Postal:
Postnet (US), BPO4 State, Canadian 4 State, Japanese Post, KIX (Dutch Post),Planet Code
OCR Fonts:
OCR-A, OCR-B
Interfaces:
RS232, Wedge, and HHLC (Code 128 Emulation)
Programable
Options:
Baud, Parity, Data Formatting, Code Options
Mechanical/Electrical
Dimensions
Length:
Height
Width:
Weight w/o cord:
4.85 in. (12.3 cm)
1.85 in. (4.7 cm)
2.50 in. (6.35 cm)
6.5 oz. (182 g) or less
Power Requirements:
4 to 9 volts
Current Draw:
Low Power Mode - average @ 5 VDC-40mA
Medium Power Mode - average @ 5 VDC-125mA
High Power Mode - average @ 5 VDC-175mA
Standby Current:
< 200µA @ 5V
Environmental
Temperature
Operating:
Storage:
-0oC to 50oC
-40oC to +70oC
Humidity:
95% RH, non condensing at 50oC
Shock:
10 drops 5 ft. to concrete @ room temperature
ESD:
Functional after 15KV discharge
Surface Resistivity:
Less than 10E5 ohms/square inch as measured by ASTM D257,
Standard Test Methods for Conductance of Insulating Materials
Triboelectric Residual
Charge:
Less than 5 volts as measured by non-contact Electrostatic Field Meter
Agency:
FCC Class A, CE
Complies with EMC 89/336/EEC
and LVD 73/23/EEC
W orldw ide O ffices
O ffices Serving N orth Am erica
Skaneateles Falls, NY
Tel: +1 315 685 8945
or, in North Am erica: +1 800 782 4263
sales@ hhp.com
Charlotte, NC
Tel: +1 704 998 3998
or, in North Am erica: +1 800 782 4263
sales@ hhp.com
O ffices Serving Europe,
M iddle East, and Africa
Europe
Tel: +31 (0) 40 29 01 600
euro_sales@ hhp.com
United Kingdom
Tel: +44 (0) 1 925 240055
euro_sales@ hhp.com
Ireland
Tel: +353 (0) 502 44007
euro_sales@ hhp.com
France
Tel: +33 (0) 1 461 04111
euro_sales@ hhp.com
G erm any
Tel: +49 (0) 7 477 151377
euro_sales@ hhp.com
Spain
Tel: +34 93 228 76 68
euro_sales@ hhp.com
O ffices Serving Asia and the
Pacific R im
Hong Kong
Tel: +852 2511 3050/2511 3132
asia_sales@ hhp.com
Japan
Tel: +813 52127392
asia_sales@ hhp.com
W eb Site Address www.hhp.com
Hand Held Products, Inc. d/b/a HHP (“HHP”)  1999-2002. All rights reserved. Printed in the U.S.A.
Due to HHP’s continuing product im provem ent program s, specifications and features herein are subject to change without notice.
4710ESD/SS Rev B
10/02
O ffices Serving Latin Am erica
Naples, Florida
Tel: +1 239 263 7600
la-sales@ hhp.com
São Paulo
Tel: +55 11 5016 3454
la-sales@ hhp.com
Rio De Janiero
Tel: +55 21 2494 7060
la-sales@ hhp.com
Download PDF