Panasonic KX-TDA100 KX-TDA200 2-0 Memory Card

KX-TDA0920
www.voicesonic.com
Phone: 877-289-2829
3DQDVRQLF7HOHSKRQH6\VWHPV
SD Memory Card Installation/Upgrade Guide
Table of Contents
Preparation............................................................................................................................... 2
Installing a New Hybrid IP-PBX............................................................................................... 5
Upgrading a Hybrid IP-PBX from a Previous Version of System Software .............................. 7
Restoring a Hybrid IP-PBX to a Previous System Version..................................................... 13
SD Memory Card Installation/Upgrade Guide
1
Section
1
Preparation
Please read the information in this section before installing or
upgrading the SD Memory Card.
1.1
Introduction
This leaflet provides procedures for installing the SD Memory Card for Software Upgrade in a new
Hybrid IP-PBX, and also for upgrading system software from a previous version. These procedures
involve transferring files between the Hybrid IP-PBX, the SD Memory Card, and a PC running KXTDA Maintenance Console.
At any point during a procedure, you can use the SD Card File View and Load option from KX-TDA
Maintenance Console's Utility menu to view the header information of files on the SD Memory Card.
This allows you to confirm that the correct versions of relevant files have been copied to the SD
Memory Card.
The procedures described in this leaflet use the following files, contained on the SD Memory Card:
File
Description
DSYS
User data
PMPR
Hybrid IP-PBX main software
DLNGx (x=0–2)
Extension LCD language data
DIxxx
Initial user data files
DKEYSD
Enhanced feature access file
IMPORTANT
•
•
•
•
2
In order to avoid possible corruption of data on the SD Memory Card, please ensure
that the "SD ACCESS" LED is off before pressing the Reset Button.
The SD Memory Card poses a choking hazard. Keep the SD Memory Card out of reach
of children.
The SD Memory Card must be inserted in the SD Memory Card slot of the Hybrid IPPBX before start up.
Before touching the System Initialize Switch, discharge static electricity by touching
ground or wearing an earthing strap.
SD Memory Card Installation/Upgrade Guide
1.1 Introduction
1.1.1
New Features
The KX-TDA0920 provides the following enhanced features. For details on these features, see the
Feature Guide of the KX-TDA100/KX-TDA200.
Enhanced Features
•
•
Network Direct Station Selection (NDSS)
Enhanced CTI functions
SD Memory Card Installation/Upgrade Guide
3
1.2 Before Installing SD Memory Card for Software Upgrade
1.2
Before Installing SD Memory Card for Software
Upgrade
Back up the DKEYSD file
SD Memory
Card Reader
The DKEYSD file stored on the SD Memory Card contains data necessary to use the new features.
If this file is damaged, or accidentally deleted, these new features will not function. Using an SD
Memory Card Reader, back up all of the files and folders on the SD Memory Card, including the
DKEYSD file, to a PC. The contents of the DKEYSD file are different for every SD Memory Card, so
you must back up each SD Memory Card separately.
4
SD Memory Card Installation/Upgrade Guide
Section
2
Installing a New Hybrid IP-PBX
Before using the SD Memory Card for Software Upgrade, it is
necessary to prepare the correct system data files using a
connected PC.
2.1
Procedure
Before beginning the install procedure, make sure that power is not supplied to the Hybrid IP-PBX,
and Maintenance Console for KX-TDA version 2.0 is installed to the PC.
1. Install the SD Memory Card in the SD Memory Card slot of the PBX.
SD
CARD
SD
CARD
SD
CARD
2. Set the System Initialize Switch to the "SYSTEM INITIALIZE" position.
Reset Button
RESET
SYSTEM
INITIALIZE
NORMAL
System Initialize Switch
3. Turn on the power to the PBX.
4. While the RUN indicator is flashing, return the System Initialize Switch to the "NORMAL"
position.
Initialization may take about 1 min to 3 min. When completed, the RUN indicator will stop flashing
and turn on.
5. Connect to the PBX using KX-TDA Maintenance Console.
Quick Setup will start automatically.
SD Memory Card Installation/Upgrade Guide
5
2.1 Procedure
6. Set the data items as prompted.
Quick Setup will finish.
Backing Up DKEYSD file
If the contents of the SD Memory Card have not been previously backed up to the PC using an SD
Memory Card Reader, it is strongly recommended to back up the DKEYSD file now. To do so, follow
the procedure below.
1. From KX-TDA Maintenance Console’s Utility menu, select File Transfer PBX (SD Card) to PC.
2. Select DKEYSD from the list of files.
3. Click Transfer.
The Save dialog box will be displayed.
4. Navigate to the folder in which you want to save the file.
5. Enter a file name.
6. Click Save.
A window showing the download process will be displayed.
A message will be displayed when the transfer is complete.
7. Click OK.
The Hybrid IP-PBX can now be programmed for the customer.
6
SD Memory Card Installation/Upgrade Guide
Section
3
Upgrading a Hybrid IP-PBX from a Previous
Version of System Software
To upgrade the system software of the Hybrid IP-PBX from a
previous version while keeping the current user data, it is
necessary to follow the procedure below.
3.1
Procedure
Before beginning the install procedure, make sure that Maintenance Consoles for both KX-TDA
version 1.1 and 2.0 are installed to the PC.
1. Back up the current user data.
1a. Back up the current DSYS system data file from the PBX to the SD Memory Card.
1. Connect to the PBX using KX-TDA Maintenance Console.
The appropriate version of KX-TDA Maintenance Console will be selected
automatically.
2. From the Tool menu, select SD memory backup.
The current DSYS system data file will be copied from the PBX to the SD Memory Card.
1b. Copy the current DSYS from the SD Memory Card to the PC.
1. From the Utility menu, select File Transfer PBX (SD Card) to PC.
SD Memory Card Installation/Upgrade Guide
7
3.1 Procedure
2. Select DSYS from the list of files.
3. Click Transfer.
The Save dialog box will be displayed.
4. Navigate to the folder in which you want to save the file.
5. Enter a file name.
6. Click Save.
A window showing the download process will be displayed.
A message will be displayed when the transfer is complete.
7. Click OK.
8. From the File menu, select eXit.
9. Click OK.
The KX-TDA Maintenance Console software will close. This step is necessary to switch
to the current version of KX-TDA Maintenance Console.
2. Upgrade the current user data.
2a. Convert the current DSYS file for use with the new version.
1. Start KX-TDA Maintenance Console. (Do not connect to the PBX.)
The appropriate version of KX-TDA Maintenance Console will be selected
automatically.
2. From the File menu, select Open.
The Open dialog box will be displayed.
3. Navigate to the folder in which you saved the DSYS file in Step 1.
4. Select the file.
5. Click Open.
A dialog box will appear to confirm that you want to convert the data.
6. Click Yes.
7. Enter a name for the new converted system file.
The DSYS file will be converted for compatibility with the new version of KX-TDA
Maintenance Console, saved, and opened.
8. From the File menu, select Close, to close the currently open system file.
3. Set up the new system version.
3a. Install the new SD Memory Card, KX-TDA0920.
1. Turn off the power to the PBX.
2. Remove the current SD Memory Card from the SD Memory Card slot.
8
SD Memory Card Installation/Upgrade Guide
3.1 Procedure
3. Install the new SD Memory Card.
SD
CARD
SD
CARD
SD
CARD
4. Set the System Initialize Switch to the "SYSTEM INITIALIZE" position.
Reset Button
RESET
SYSTEM
INITIALIZE
NORMAL
System Initialize Switch
5. Turn on the power to the PBX.
6. While the RUN indicator is flashing, return the System Initialize Switch to the
"NORMAL" position.
3b. Run Quick Setup.
1. Connect to the PBX using KX-TDA Maintenance Console.
Quick Setup will restart automatically.
2. Set the data items as prompted.
Quick Setup will finish.
If the contents of the SD Memory Card have not been previously backed up to the PC
using an SD Memory Card Reader, it is strongly recommended to back up the DKEYSD
file now. To do so, follow the procedure below.
a. From the Utility menu, select File Transfer PBX (SD Card) to PC.
b. Select DKEYSD from the list of files.
c. Click Transfer.
The Save dialog box will be displayed.
d. Navigate to the folder in which you want to save the file.
e. Enter a file name.
f. Click Save.
A window showing the download process will be displayed.
A message will be displayed when the transfer is complete.
g. Click OK.
4. Restore the user data.
4a. Transfer the DSYS file that was converted in Step 2 from the PC to the SD Memory Card.
SD Memory Card Installation/Upgrade Guide
9
3.1 Procedure
1. From the Utility menu, select File Transfer PC to PBX (SD Card).
The Open dialog box will be displayed.
2. Select the converted DSYS file that was saved in Step 2.
The file will be uploaded to the SD Memory Card as the backup DSYS file
(DSYS_SUB), and a message displayed when the transfer is complete.
3. Click OK.
4b. Set the transferred DSYS file to be the active DSYS file.
1. From the Utility menu, point to System Reset and then click Reset by the Command.
2. Select Skip to continue without backing up current data to the SD Memory Card.
3. Select Use Replace File for DSYS and Keep Present File for PMPR.
4. Click OK.
A confirmation screen will be displayed.
5. Click OK.
10
SD Memory Card Installation/Upgrade Guide
3.1 Procedure
Another confirmation screen will be displayed.
6. Click OK.
The DSYS and backup DSYS files will be swapped, and the PBX reset.
The upgrade process is complete.
SD Memory Card Installation/Upgrade Guide
11
3.2 Data Reset After Upgrade
3.2
Data Reset After Upgrade
Data that is stored in the SRAM of the Hybrid IP-PBX (not on the SD Memory Card) is cleared during
the upgrade process.
The data items listed below are all cleared by upgrade.
•
Incoming Call Log
•
Outgoing Call Log (including Last Number Redial)
•
Message Waiting
•
SMDR
•
ICD Group monitor log for supervisor
•
PBX date and time
•
Timed Reminder
•
LPR Timed Update time
•
Daily test start time
•
PT handset/headset volume
•
PT SP-PHONE volume
•
PT ring volume
•
PT display contrast
•
ICD Group login status
(All extensions are set to Login by default.)
•
ICD Group Ready/Not Ready status
(All extensions are set to Ready by default.)
•
Live Call Screening (LCS) On/Off
•
Hands-free Answerback status
•
Absent Message status of extensions
(Absent Message data itself is not cleared.)
•
FWD/DND status
(FWD destinations are not cleared.)
•
Extension Lock/Remote Extension Lock
•
Extension PIN Lock/Extension PIN Lock counter
•
Verified Code PIN Lock/Verified Code PIN Lock counter
•
Password Lock counter for Remote System Programming
•
PBX Error Log
12
SD Memory Card Installation/Upgrade Guide
Section
4
Restoring a Hybrid IP-PBX to a Previous System
Version
The following procedure allows you to undo an upgrade and
return to the previous version of system software and data.
Use this procedure if the upgrade process did not complete
successfully.
4.1
Procedure
1. Turn off the power to the PBX.
2. Remove the new SD Memory Card that is currently installed in the PBX.
3. Set the lock switch of the previous SD Memory Card for read-only access.
LOCK
LOCK
4. Install the previous SD Memory Card in the SD Memory Card slot of the PBX.
5. Set the System Initialize Switch to the "SYSTEM INITIALIZE" position.
Reset Button
RESET
SYSTEM
INITIALIZE
NORMAL
System Initialize Switch
6. Turn on the power to the PBX.
SD Memory Card Installation/Upgrade Guide
13
4.1 Procedure
7. While the RUN indicator is flashing, turn the System Initialize Switch to the "NORMAL" position.
Initialization may take about 1 min to 3 min. When completed, the RUN indicator will stop flashing
and turn on.
8. Turn off the power to the PBX again.
9. Remove the SD Memory Card from the PBX, and set the lock switch for read/write access.
LOCK
LOCK
10. Turn on the power to the PBX.
The previous version's DSYS file will be copied from the SD Memory Card to the PBX.
The Hybrid IP-PBX has been restored to the previous version.
Please note that the data listed in "3.2 Data Reset After Upgrade" will not be restored by this
procedure.
14
SD Memory Card Installation/Upgrade Guide
4.1 Procedure
SD Memory Card Installation/Upgrade Guide
15
3DQDVRQLF7HOHSKRQH6\VWHPV
See More
Panasonic Manuals
www.voicesonic.com
Phone: 877-289-2829
Copyright:
This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced for internal
use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic
Communications Co., Ltd.
© 2005 Panasonic Communications Co., Ltd. All Rights Reserved.
PSQW2248ZA KK0105ET0