APAS-114
DJ System With Bluetooth® Wireless Technology
QUICK START GUIDE
1
2
PARTS LIST
In the box you will find:
1 x DJ System
1 x Wireless Microphone
1 x Power Cable
CONNECTIONS
Control Panel
1
2
3
4
5
6
7
8
9
10
11
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
12
13
14
15
16
17
18
19
5 Band Equaliser: Adjust the music playback to your preference.
Repeat Button: Press to repeat the current track, press again to repeat all.
USB/SD Indicator Light: Indicates USB/SD card mode.
SD Card Slot: Insert SD card.
USB Port: Insert USB device.
Bluetooth Indicator Light: Indicates Bluetooth mode.
Pause/Play Button: Press to play music track, press again to pause track.
Next track Button: Press to play the next track.
Source Button: Select mode from AUX (default), USB/SD or Bluetooth mode.
Previous Track: Press to play the previous track.
Guitar Input Socket: Insert the guitar connector.
Guitar Volume Control: Adjust the guitar volume.
Microphone Echo Control: Adjust the microphone echo.
Microphone Volume Control: Adjust the microphone volume.
Karaoke Mode Button: While the speaker system is playing music:
Press the button (down) for the karaoke function, with music.
Release the button (up) for microphone (voice only), without music.
Microphone Input Socket: Connect a wired microphone.
Power Indicator: Indicates that the power is on.
Master Volume Control: Adjust the volume.
Battery Charging Indicator Light: Indicates that the battery is charging.
Read the full instruction manual before use. This Quick Start Guide only gives basic usage instructions.
APAS-114
DJ System With Bluetooth® Wireless Technology
QUICK START GUIDE
3
Back Panel
1 3.5mm Signal Input Socket: Connect a
computer, TV, portable music device.
2 RCA Input:
Connect a TV, DVD, audio playback
equipment.
3 RCA Output:
Connect additional speakers, if required.
4 DC Input / Battery Charge / AC Input
Switch: Switch the power source.
5 AC Power Switch:
Switch AC power ON/OFF.
6 DC Power Supply Input:
Connect to DC power supply source.
7 AC Power Input:
Connect the power cable.
1
2
3
6
4
7
5
APAS-114
DJ System
with Bluetooth® Wireless Technology
Power Input: 230V AC 50/60Hz 50W
Mic frequency: 202.75MHz
AUS 1300 886 649
www.tempo.org
4
Made in China
1 W2
YEAR WARRANTY
10/2015 PLU: 47396 BARCODE: 2621 0292
POWER SOURCE
This system can be powered three different ways:
(a) By connection to the mains power supply with the supplied power cord.
(b) Via the rechargeable 12V 4.5Ah built- in battery.
(c) Via an external DC power supply (not included).
AC Mode (mains power supply)
• Connect the power cable to the AC power input, then insert the plug into an appropriate wall outlet.
• Set the AC POWER SWITCH to ON.
• Set the POWER SOURCE to AC mode. The system is now in operating mode and will be powered by ~230V/50-60Hz.
DC Mode
• If the equipment is connected to the mains power supply, disconnect the power cable.
• Set the AC POWER SWITCH to OFF.
• Set the POWER SOURCE to DC INPUT.
• External DC power supply
To power the unit via an external DC power supply, connect the external power supply's positive pole to the red terminal
and the negative pole to the black terminal. The system will now be powered by the external DC power supply.
NOTE: The external DC power supply must be DC 12V-15V with a minimum output power of 50W.
• Internal 12V 4.5Ah battery power supply
If no external power supply is connected, the system will automatically be powered by the buit-in 12V 4.5Ah battery
when the power source is set to DC INPUT.
AC Power Switch
• Set to ON to use the equipment in AC mode, or to charge the in-built battery.
• Set to OFF to use the equipment in DC mode.
• To switch the system off, set the POWER SOURCE to AC mode and the AC POWER SWITCH to OFF.
www.tempo.org
AUS
1300 886 649
Model: APAS-114 Product Code: 47396 10/2015
Download PDF