◆
Internal or external drive for USB 2.0
interface with four different slots
and very high transfer rates
◆ Very fast internal drive with standard 3.5" case and high speed
USB 2.0 interface with slots for most popular Flash memory
cards; also available as an external version in a robust plastic
case in grey; other colours on request
◆ Four slots for memory cards:
1.) ATA PC Card or HDD in PC Card format (Type I or II)
2.) CompactFlash Card (Type I or II) or Microdrive
3.) SD & SDHC Card (supports SD/SDHC High-Speed Mode),
MMC & MMC plus
4.) Memory Stick PRO/PRO Duo/PRO-HG/PRO-HG Duo
◆ Each slot appears under Windows as a separate removable
media drive; data can be copied fast and directly between
cards inserted in different slots
◆ By using appropriate PC Card, CF or MS PRO adapters compatible with memory cards such as miniSD/SDHC, microSD/SDHC,
Memory Stick Micro M2 or xD-Cards
◆ USB 2.0 Mass Storage compliant; downwards compatible to
USB 1.1
◆ Windows ME, 2000 with Service Pack 3, XP, Vista and Linux
compatible using drivers contained in operating system;
special drivers are necessary for Windows 98 SE and 2000
without SP3
Storage media which is directly supported by the USB Drive plus S
◆ Power supply via standard connector at internal version,
external version USB bus powered; external power supply
available on request
➾
◆ Optional extensions such as activation of software write protection and unmounting of cards from application software
Technical Specifications
Hardware
– Interface
– Memory card slots
– Temperature
USB 2.0 high speed
1x PC Card (Type I, II); 1x CompactFlash (Typ I + II); 1x SD/SDHC/MMC/
MMCplus; 1x Memory Stick PRO/
PRO Duo/PRO-HG/PRO-GH Duo
– Dimensions
L xWxH: 142 x 101.6 x 25.4 mm;
standard 3.5" drive dimensions;
external version L xWxH: 147 x
108 x 32 mm
Environmental Specifications
– Humidity
0% to 90%, non-condensing
altec ComputerSysteme GmbH
Bayernstr. 10 · 30855 Langenhagen · Germany
Phone +49-5 11-9 83 81-0 · Fax +49-5 11-9 83 81-49
eMail: info@altec-cs.com
Web: www.altec-cs.com
Electrical
– Power consumption
System Performance
– Data Transfer Rate
Software
– Supported OS
ISO 9001:2000 certified
More details
USB Drive plus S
Item no.
USB Drive plus S internal
USB Drive plus S external grey
B25AL153
B25AL153E
0° to +70°C (operating)
–40° to +75°C (non-operating)
depends on memory card type
depends on memory card type and
USB connection (USB 1.1 or 2.0)
No driver required for Windows ME,
2000 SP3, XP,Vista and Linux; with
drivers Win 98 SE and 2000 w/o SP3
Technical data subject to change without prior notice. All brand and product names are trademark of their respective owners.
© 2009 altec ComputerSysteme GmbH. Version >USB_Drive_plus_S_DB_e10< >02/09<
◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆
◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆
USB Drive plus S
More details about the USB Drive plus S
◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆
Connector pin assignment internal
Rear view
Connector pin assignment internal
Top view
Connectors external
Rear view
122
60
Mechanical Dimensions
Bottom View
15.9
54.4
10
10
45
A total of four bottom and four side
mounting holes (marked in orange)
are available for installation.
41.5
86
93.4 101.4
10.5
14
4*
The mounting holes require M3
screws with a maximum depth of
5 mm.
3
M
31
50
101
122
138
Mechanical Dimensions
25.4
13
6
5
21
81
138
Side View
Download PDF