The professional data logger for any application.

Powador-proLOG
The professional data logger for
any application.
Powador-proLOG.
General data
•4 versions available
S, M, L, XL
•Comprehensive monitoring
via RS485
• For up to 32 Powador
string inverters
• For up to 10 Powador
central inverters
•Compatibel with all operating
systems
•Data storage with 128 MB
•Storage interval of the average
values adjustable between 5
and 60 minutes
•Energy meter, solar sensors,
current sensors and temperature sensors can be connected
as an option
•Only a browser required for
remote monitoring via
Powador-web
• KACO configures data logger
Electrical data
Powador-proLOG S
Powador-proLOG M / L / XL
Input variables
Power supply
230 V / 50 Hz (85 VAC ... 260 VAC)
Power consumption
approx. 4 W
Analog inputs (configurable)
0 V ... 10 V (max. load: 24 V)
0 mA ... 20 mA (max. load: 40 mA / 3 V )
PT 1000 resistance measurement
Digital inputs
low = 0 VDC ... 7 VDC
high = 9 VDC ... 24 VDC
Output variables
Digital output
optocoupler (max. load: 70 VDC / 50 mA)
Internal battery (internal clock)
lithium cell / model Li2032
Mechanical data
HxWxD
90 x 160 x 73 mm
230 x 225 x 85 mm
Installation
top hat rail
wall installation
Protection class
IP20
IP21
Weight
360 g
1 kg
Ambient temperature
Operation
Storage and transport
0 °C ... +55 °C
-22 °C ... +65 °C
PV system monitoring.
The Powador-proLOG is a data logger that provides extensive options for
local and remote monitoring on the PC.
It records the current, voltages, temperatures, power and yields of every individual inverter. External sensors can also
be connected to it. The stored installation data is transmittet every day in a text
filed to an Email address of your choice.
The data logger also automatically reports by Email, fax or SMS if the installationexits the operating states specified
by the user. The alarm parameters can
be matched exactly to the technical properties of the installation.
Terminal connection diagramm
Local analysis
software
Powador-monitor
Powador
Powador
Powador-proLOG
Powador
RS485
RS485
Ethernet
RS485
Remote system monitoring
(only Powador-proLOG L/XL)
E-Mail
www
Alarm
SMS
Fax
The current measured values can be
viewed at any time via the PC. The free
Powador-monitor software enables the
graphic display of the data. You can
access the data from anywhere in the
world using the password protected
Powador-web Internet portal.
Powador-web
via KACO-Server
GSM or
telephone
network
Configuration / LIVE Values
Alert options
Type
Direct connection:
PC to Powador-proLOG
Alert via
Additional details
Ethernet
PC with network card (Ethernet)
Email
Email data transfer must be enabled via the network
Analog
PC with analog modem
Email / SMS / Fax
-
ISDN
PC with ISDN modem
Email / SMS
Connection to telephone system or directly to S0 interface
(NTBA)
GSM
PC with analog modem
Email / SMS / Fax
GSM data SIM card 9600 baud required (available from KACO)
/no GPRS/UMTS agreement
DSL postbox.
The Powador-proLOG with network connection (Ethernet 10 / 100 Mbit) has
a special DSL functionality – the DSL
postbox. The devices are intended for
operation with the Powador web via a
DSL connection. The Powador web can
transmit details to the Powador-proLOG
via the DSL connection within the internal network (LAN). This function can, for
example, be used to call up missing data.
This allows bidirectional communication
between the Powador web and Powador-proLOG, which is something difficult
to obtain with DSL alone due to the firewall.
In addition, the DSL postbox offers
hourly updating of measuring data in
Powador-web.
Functional overview
Powador-proLOG S
Powador-proLOG M
Powador-proLOG L
Powador-proLOG XL
Models
1. Ethernet / DSL
2. Analog
1. Ethernet / DSL
1. Analog
2. ISDN
1. Ethernet / DSL
2. Analog
3. ISDN
4. GSM
Access to Powador-proLOG
data via
Ethernet
EDI connection
(Modem)
Compact Flash
Ethernet
Compact Flash
Ethernet
EDI connection
(Modem)
Compact Flash
Ethernet
EDI connection
(Modem)
Compact Flash
Integrated modem for
remote monitoring
1. without modem
2. Analog
1. without modem
1. Analog
2. ISDN
1. without modem
2. Analog
3. ISDN
4. GSM
Interface for local evaluation
Ethernet
Ethernet
Ethernet
Ethernet
Interface for connection of inverters and current sensors
RS485
RS485
RS485
RS485
Number of manageable inverters /
central inverters
see output limit
32/10
32/10
32/10
Output limit
max. 50 kWp
unlimited
unlimited
unlimited
Address space inverter
1 ... 32
1 ... 32
1 ... 32
1 ... 32
Number of manageable
Powador-go
100
100
100
100
Address space Powador-go
0 ... 99
0 ... 99
0 ... 99
0 ... 99
Analog inputs for sensors
1
1
1
4
Digital inputs (pulse counter etc.)
1
1
1
4
Alarm or S0 output,
optically discrete
1
1
1
1
Displays on device
4 LED´s, Display 2 x 16
characters
4 LED´s, Display 2 x 16
characters
4 LED´s, Display 2 x 16
characters
4 LED´s, Display 2 x 16
characters
Integrated power supply
230 V / 24 V
x
x
x
x
Storage
Compact Flash 256 MB
Compact Flash 256 MB
Compact Flash 256 MB
Compact Flash 256 MB
Storage period
5-60 minutes
5-60 minutes
5-60 minutes
5-60 minutes
Software required for configuration any internet browser
any internet browser
any internet browser
any internet browser
Software for local evaluation
Powador-monitor
Powador-monitor
Powador-monitor
Powador-monitor
Evaluation via Internet
Powador-web
Powador-web
Powador-web
Powador-web
Accessories.
Powador-link RS485.
The Powador-link RS485 is a radio
module consisting of a transmitter and
receiver that uses the wireless extension
of the RS485 bus at the inverter. Installation monitoring for several inverters
that are located at a distance from each
can be configured with this. The data of
the first part bus is sent from the Powador-RS485 transmitter to the PowadorRS485 receiver by radio. The data of
two part busses are provided with one
data logger.
Highlights
• Wireless transmission via RS485
• 433 MHz band
• For use with the
Inverter
Powador-link
RS485-Transmitter
Powador-proLOG
•Range: up to 1,000 m depending on the topographic
situation
•Outdoor antenna 3 m / 5 m
optional
Powador-proLOG
Accessories.
IO modules.
The IO module is designed to increase the
number of analogue or digital channels
of the Powador-proLOG. Two models of
this expansion module are available:
IO module
•IO module 1 (4 analog inputs,
4 digital inputs, 1 digital output)
•IO module 2 (8 digital inputs,
1 digital output)
Powador-proLOG
Switch/Hub
Internal network (LAN)
PC
Powador-link
RS485-Receiver
Accessories.
Powador-go.
As an accessory for the large PowadorproLOG data logger, the current sensor
has two additional options:
1.It allows more than 32 string inverters or 10 central inverters to be included in the monitoring.
• Suitable for AC and DC
• Up to 100 Powador-go units can be
(specify with order)
connected to a Powador-proLOG
• Galvanically isolated current
• Up to 10 Powador-go units can
measurement
• Simple wiring using standardised
pins (RJ45)
2.It also allows the monitoring of inverters without the RS485 interface
with the Powador-proLOG.
• Signalling using 3 status LEDs
• Flexible number of sensors via bus
communication (RS485)
max. 99
Powador-go
max. 32 inverters
Connection via patch cable
Ferrule resistor
Technical data
Powador-go
Current range
DC version
14 A; 35 A; 70 A
AC version
10 A; 25 A; 50 A
Communication
Interface
RS485
Connector
RJ45
Electrical data
Power supply
12 VDC ... 24 VDC
Mechanical data
HxWxD
35 x 86 x 58 mm
Installation
top hat rail
Alerting
status LED
switch contact with 12 VDC or 24 VDC / 50 mA
be connected together with the
data logger to the power supply of
the Powador-proLOG (24 V / 320 mA)
• The current range must be specified
with the order when using with the
Powador-proLOG
• Simple installation on top hat rail
Accessories.
MTK3 Metering sensor.
MTK3 is an optical metering sensor for
scanning energy meters. It has been design‑
ed for connection to Powador-proLOG,
thus making it possible to use the calibrated metering value of the Electricity Board
within the internal Powador-proLOG measuring functions. Sensitivity adjustments
on the disk meter will not be necessary
because MTK3 adapts automatically to the
respective meter type.
Highlights
•Optical scanning of energy
meters
•Automatically adjusts to the
meter type
•For disk meters or pulsed LED
Technical data.
MTK3 Metering sensor.
Electrical data
Operating voltage
5.5 VDC ... 30 VDC
Max. current consumption
5 mA
Function check
via LED
Max. scanning rate
3 U/sec (disc meter) or
5 pulses/sec (LED pulse)
Protection class
IP50
Ambient temperature
-20 °C ... +60 °C
Connecting cable
3m
HxBxT
22.5 x 42.5 x 21.5 mm
24V
+ -
DI1
+ -
Accessories.
Insolation Sensor.
The insolation sensor is used for the
professional monitoring of a photovoltaic
system. Based on the measured
insolation, the anticipated yield of a
photovoltaic system can be calculated
and subsequently compared with the
actual yield.
The short-circuit current of a silicon solar
cell is proportional to the extent of insolation. Our insolation sensors use a
monocrystalline solar cell, which is operated via a low-impedance resistance,
Counting sensor
Zählersensor
MTK3
Powador-proLOG
thus creating a virtual short circuit. The
positive temperature coefficient of the
short-circuit current leads to a minor
measurement error. Therefore, the silicon
sensors incorporate active temperature
compensation, which reduces these
errors by a factor of 20. For this purpose,
a special temperature sensor is laminated
onto the rear side of the solar cell.
All sensors are calibrated against sunlight
using a pyranometer (Kipp & Zonen, type
CM11).
Signal
(grew)
(grau)
PIN
Pin 22
Ground
Masse
(rot)
(red)
PIN
Pin 1
5,5
- 30V
5.5-30 V
(blau)
(blue)
PIN
Pin 33
Accessories.
Module temperature sensor / Temperature converter.
This sensor measures the temperature
of photovoltaic modules. To do this,
the self-adhesive temperature sensor is
attached to the rear of a module. A PT
100 thin film temperature sensor that is
supplied with a 2 m long connection cable (wire: 7 × 0.2) is located in the silicon
rubber plaster.
The signal for the Powador-proLOG is
produced by the temperature converter
PXT 10. The line resistances between
the temperature sensor and converter
are compensated. We also recommend
a 230 V AC supply for the PowadorproLOG to relieve the internal power
supply of the data logger.
Highlights
• Temperature
-50 °C ... +150 °C
• Connection
LIYCY 2 x 2 x 0.5 max. 100 m
• Supply unit
24 V or 230 V
Module temperature sensor
Temperature Converter
60700006 / 230 VAC
60700005 / 24 VDC
Accessories.
External temperature sensor.
The external temperature sensor (type
AGS54 ext. TRV1) measures the ambient
temperature. It specifies the internal heat
dissipation of the modules when compared with a module temperature sensor
that is also available.
Highlights
• Temperature
-50 °C ... +50 °C
• Connection
LIYCY 2 x 2 x 0.5 max. 100 m
• Supply unit
24 V
Evaluation options.
Powador-monitor.
Powador-monitor is an item of PC software for local evaluation of the measured values that are recorded by the
Powador-proLOG data logger. The data
is transmitted to the computer by modem or Ethernet. The data can be imported using a Compact Flash Card. You
can choose different display types.
Archiving is also possible allowing you to
have visual control of the inverter values
over long periods of time.
Powador-proLOG
PC with Powador-monitor
Highlights
•Simple evaluation on a PC
• Live display
•Detailed view of individual
inverters
•Daily, monthly and annual
overview
•Configuration of the PowadorproLOG required
•Compatible with the Windows
operating system
• Free to download
PC/Notebook
mit Powador-monitor
Cross Over Kabel
Evaluation options.
Powador-web.
Powador-web is an Internet portal that
allows for a comprehensive evaluation
and visualisation of photovoltaic installations together with the Powador-proLOG.
Access is possible from anywhere in the
world via the Internet.
Access is password protected. The data
displayed depends on the configuration of the data logger. Options cover
the energy production over various time
periods and for differentpartial installations including a target/actual compari-
son of the values of individual inverters
such as current, voltage, power at the
input and output, module temperature
and solar irradiation. Furthermore, alarm
conditions and the type of messages
can be configured and organised. Data
tables can be generated over a longer
time period using the report function.
Powador-web diagrams can be included on your own website for a one-off
charge.
Highlights
• Low annual fee
•Compatible with all
operating systems
•Graphic presentation and display
of all measured monitoring
•High-end solution for compre‑
hensive remote monitoring
• Automatic data transmission
• Comprehensive alarm parameters
•Alarm sent by Email, Fax or SMS
•Summary of all Powador-proLOG
installations in an installation park
•KACO configures data logger
using the registration form
Differences
in the evaluation options.
Powador-monitor
Powador-web
•Simple analysis
•8“ display
•Analysis on PC with Microsoft windows software (local)
• Internal memory
• Powador-proLOG needs to be configured by oneself
•Card reader for external memory cards
•Data must be individually loaded from the data logger
•Adjustable frame
via EDI or network connection
•Missing data needs to be added
•Visualizazion only, alerting via Powador-proLOG
•Update function
• Free of charge
Evaluation options.
Powador-display WEB.
•8“ display
•Internal memory
•Card reader for external
memory cards
•Adjustable frame
•Audio: MP3, WMA
•Video: WMV
Using the Powador-display WEB, data
from an installation that is monitored via
the Powador-web can be conveniently
visualized without a PC. The data is transmitted to the digital picture frame via a
WLAN router. The images are compiled
via the Powador-web. The integration of
your own images is possible.
•Audio: MP3, WMA
•Video: WMV
Accessories.
Large display Powador-view.
The large display Powador-view is universally adaptable to all KACO photovoltaic
inverters. It can be directly controlled via
the SO interface of the Powador inverter
or via the SO interface of the PowadorproLOG. The display processes the electricity meter pulses and produces all the
data from the same:
No additional adapter or data logger is
needed. If the system does not have a
Powador-proLOG, or deploys several inverters, you can obtain a suitable electricity meter from us. In the event that you
are already operating an electric power
counter with pulse output, or are scheduled to install the same, we can usually
adapt the display.
Current output,
daily output,
total yield,
CO2-reduction (optional).
Individual design
There are two standard designs to choose
from, which can be modified with text
and logos in a project-oriented way to fit
your needs. Photo templates can also be
processed. The four-color printed front
Großanzeige
(UV system) is protected under perspex
and laminated for weatherproofing.
Data security
The data from your total readings is regularly stored in non-volatile media. It is consequently safe in the event of a power cut
or system reset. The meter recording the
daily output automatically resets itself to
the zero point over night.
Setting options
The total energy data can be initialized
to a starting value by pressing a button,
whereupon the actual process of adding
up the kWh begins.
Stromzähler
(z.B. Typ IPR-3-EMU)
–
+
So-Impulse
Netzleitung
Datenleitung
Klemmdose
Installation: JY-(St)-Y 2 x 0,6 mm2
Entfernung: max. 200 m
L N PE
Technical data
PV3-LC
Casing
PV3-LED (rot)
PV3-LED (blau)
extruded profile, black with covered horizontal strips; protection class IP65
HxWxD
640 x 520 x 55 mm
720 x 620 x 55 mm
Weight
720 x 620 x 55 mm
6 kg
Operating voltage
230 V, 50 Hz
Power consumption
approx. 1.5 W
approx. 11 W
approx. 11 W
Display
7 segment LCD, reflective,
figure height 40 mm
7 segment LED,
figure height 57 mm,
red, extra bright
7 segment LED,
figure height 57 mm,
blue, extra bright
Connection
electricity meter with potential-free pulse output (SO interface)
for direct connection to inverter or Powador-proLOG
Data security
EEPROM for total kWh value
Installation
Wall installation
Overview.
Powador-proLOG and Accessories.
Powador-proLOG
Powador-proLOG
XL Serie
L Serie
70300017
Powador-proLOG XL GSM
70300019
Powador-proLOG L analog
70300016
Powador-proLOG XL analog
70300021
Powador-proLOG L ISDN
70300018
Powador-proLOG XL ISDN
M Serie
70300037
Powador-proLOG XL Ethernet / DSL
70300021
Powador-proLOG M Ethernet/ DSL
Internet portal (access data)
70300039
Powador-proLOG S Ethernet / DSL
61100005
70300040
Powador-proLOG S analog
Optional for Powador-web Standard
Powador-web Standard
Accessories Powador-proLOG
61100012
Powador-web Info
Powador-go current sensors
61100013
Powador-web Park (setup + contingency)
60500037
Powador-go Measuring range AC: 10A
61100014
Powador-web Park (extension)
60500038
Powador-go Measuring range AC: 25A
60500039
Powador-go Measuring range AC: 50A
61100002
Powador-web Portal
60500040
Powador-go Measuring range DC: 14A
61200001
Powador-web Portal
60500041
Powador-go Measuring range DC: 35A
60500042
Powador-go Measuring range DC: 70A
Extension modules
70300034
I0 Module - 1 (4 x Al / 4 x DI / 1 x DO)
70300033
I0 Module - 2 (8 x Dl / 1 x DO)
RS485 wireless connection
62300001
Powador-link RS485
62300002
Exterior antenna with 3 m cable
62300003
Exterior antenna with 5 m cable
GSM
70300008
GSM data card, D1 contract, 24 months
70300023
GSM data card, D2 contract, 24 months
70300035
GSM antenna extension 10 m
License after expiration of 5 years
61100011
Powador-web extension
Local analysis at pc
70300024
Powador-monitor
Energy meters with pulsed output
Top-rail mounting (IPR)
60400001
IPR-1 single-phase AC meter
60400008
IPR-2 Single-phase AC meter
60400007
IPR-3 EMU three-phase current meter
Wall mounting/metering station (NZR)
60400002
NZR-1 single-phase AC meter
60400004
NZR-3 three-phase current meter
Accessories
70300025
MTK metering sensor
70300036
Holder for metering sensor
Sensors Powador-proLOG
60400009
Pulse adder
Solar sensors
Large display (individual design)
Miscellaneous
60700008
RS485 Repeater
60600001
Solar sensor Si-12TC incl. 5 m cable
Display
60600002
Solar sensor Si-12TC-T incl. module temperature
sensor and 5 m cable
60300001
KACO large display PV3-LC
60300002
KACO large display PV3-LED (red)
60600008
Solar sensor Si-12TC incl. 30 m cable
60300013
KACO large display PV3-LED (blue)
60600009
Solar sensor Si-12TC-T incl. Module temperature
sensor and 30 m cable
Showcase
60600003
Pyranometer Kipp & Zonen CM11 (0…5 mV)
60600004
Pyranometer Kipp & Zonen CMP3 (0…15 mV)
Temperature sensors
60700002
PT 100 self-adhesive sensor
60700003
PT 100 Thies compact
60700001
PT 1000 Ambient temperature sensor
(AGS54 ext TRV1)
69900000
69900001
60300008
KACO showcase with LCD displays
60300009
KACO showcase with LEDs (red)
60300014
KACO showcase with LEDs (blue)
Optional LCD (Display + showcase)
60300004
Additional display “Earnings in €“
60300006
Additional display “CO2“
Optional LED (Display + showcase)
60300015
Additional display “ Earnings in €“ (red)
Thies compact wind speed
60300016
Additional display “CO2“ (red)
Thies compact wind direction
60300017
Additional display “ Earnings in €“ (blue)
60300018
Additional display “CO2“ (blue)
Wind sensors
Signal converters
60700007
Universal signal converter
60700005
Converter for PT 100 (24 V DC supply)
60700006
Converter for PT 100 (230 V AC supply)
Accessories Sensors
60700004
Radiation protection for PT 100 Thies compact
60600005
Terminal box
EN 31000838-01-090612
Serie S
Graphical evaluation Powador-proLOG
Your retailer
Gottfried-Leibniz-Straße 1 · 74172 Neckarsulm · Germany · Phone +49 7132 3818-0 · Fax +49 7132 3818-703 · info@kaco-newenergy.de · www.kaco-newenergy.de
The text and figures reflect the current technical state at the time of printing. Subject to technical changes. Errors and omissions excepted.
Powador-proLOG
Download PDF