2016 Hardware Catalog

2016 Hardware Catalog
CACI National and Cyber Solutions
2016 Hardware Catalog
CACI has partnered with the Intelligence Community (IC) and
For more information, contact:
Department of Defense (DoD) for the past 14 years to deliver missioncritical end-to-end SIGINT solutions. Leveraging these solutions,
45200 Business Ct.
developed by BIT Systems, a leading sensor development and signal
Dulles, VA 20166
processing company acquired by CACI in November 2013, CACI has
successfully deployed over 100 systems to more than 29 locations
(o) 703.742.7660
worldwide. Our 450+ TS/SCI cleared engineers, technicians, and
(f) 703.891.9456
analysts are recognized leaders in the SIGINT field, and we offer a
sales@caci.com
wide range of SIGINT processors and software defined radios, high
performance wide-band antenna systems, RF feeds, and numerous
other RF components to meet our customers' needs. CACI maintains
a range of catalog items or we can design and deliver a fully
customized system as required.
Pricing within is standard price per unit not including tax or shipping. All sales require execution of a BIT
Systems licensing agreement prior to delivery. Separate hardware and software maintenance contracts
are also available.
Catalog items are subject to ITAR and may require a State Department license to be exported out of the
USA. Buyer is the Exporter of Record and is responsible for obtaining any required licenses.
A Fortune World’s Most Admired Company
I N F O R M AT I O N D E P L O Y E D . S O L U T I O N S A D V A N C E D . M I S S I O N S A C C O M P L I S H E D .
Visit us online for more information
about our SIGINT Solutions:
www.caci.com/bit-systems
2016 Hardware Catalog
Index
Page Family
8
Processor
System
Description
STC Portable
40 MHz Wide IF, RF Coverage 1 kHz – 26 GHz. STC portable
Spectrum Analysis
10
Processor
RAIDER III
Part Number
Price (Qty. 1)
6A
$39,000
7F
$85,000
28 MHz Wide IF, RF Coverage 1 kHz – 20 GHz, Portable System
17I
$111,000
Dual 30 MHz Wide Input Channels, RF Coverage 30 MHz –
ASY00117-01
$130,000
ASY00061-01
$188,000
Spectrum Analyzer
40 MHz Wide IF, RF Coverage 1 kHz – 18 GHz. Portable, Fully
Functional, Turn-key Radio Frequency (RF) Collection and
Analysis Platform
12
Processor
DART
15
Processor
Razorbill R4D2
6 GHz. Rack Mounted 4U Processor with Rugged Chassis
15
Processor
Razorbill R4D2+ V2
Dual 30 MHz Wide Input Channels, RF Coverage 30 MHz –
6 GHz. Single Software Defined Output Channel.
Rack Mounted 4U Processor with Rugged Chassis
16
Processor
Razorbill R5D0
Rack Mounted 5U Processor with Rugged Chassis
R5D0
$40,000
16
Processor
Razorbill R5D2
Dual 30 MHz Wide Input Channels, RF Coverage 30 MHz –
R5D2
$129,000
ASY00115-01
$190,000
R5D2K
$129,000
R5D4
$190,000
R5D4Q
$185,000
ASY00229-02
$198,000
ASY00145-01
$151,000
ASY00145-02
$194,000
ASY00145-03
$171,000
6 GHz. Rack Mounted 5U Processor with Rugged Chassis
17
Processor
Razorbill R5D2+ V2
Dual 30 MHz Wide Input Channels, RF Coverage 30 MHz –
6 GHz. Single Software Defined Output Channel.
Rack Mounted 5U Processor with Rugged Chassis
17
Processor
Razorbill R5D2K
Dual 30 MHz Wide Input Channels, RF Coverage 30 MHz –
6 GHz. Rack Mounted 5U Processor with Rugged Chassis
18
Processor
Razorbill R5D4
Quad 30 MHz Wide Input Channels, RF Coverage 30 MHz –
6 GHz. Rack Mounted 5U Processor with Rugged Chassis
18
Processor
Razorbill R5D4Q
Quad 30 MHz Wide Input Channels, RF Coverage 30 MHz –
6 GHz. Rack Mounted 5U Processor with Rugged Chassis
19
Processor
Razorbill
Quad 30 MHz Wide Input Channels, RF Coverage
R5D4X10-IF
30 MHz-6 GHz. Rack Mounted 5U Processor with
Integrated IF Switch and Rugged Chassis
22
Processor
Universal
Rack Mounted Receiver Assembly with Eight 6 GHz RF
Receiver Chassis
22
Processor
Universal
Rack Mounted Receiver Assembly with Four 18 GHz RF
Receiver Chassis
22
Processor
Input Channels
Universal
Input Channels
Rack Mounted Receiver Assembly with Four 6 GHZ and
Receiver Chassis
two 18GHZ RF Input Channels
Visit us online for more information about our SIGINT Solutions:
www.caci.com
All trademarks and registered marks are the property of their respective owners.
2016 Hardware Catalog
Index
Page Family
23
Processor
System
Description
Universal
Rack Mounted Simulator Assembly; Simulated Signal Outputs
Simulator
with Frequency Capability 10 MHz – 6 GHz
Part Number
Price (Qty. 1)
ASY00146-01
$25,000
ASY00175-01
$144,000
ASY00176-01
$144,000
ASY00181-01
$168,000
Chassis
25
Processor
Kite K9D2S-AC
Dual 30 MHz Wide Input Channels, RF Coverage 30 MHz –
6 GHz. Integrated RF Switch. Portable Rugged Chassis with
Remote Operating Workstation. 110 – 240 V, AC powered
25
Processor
Kite K9D2S-DC
Dual 30MHz Wide Input Channels, RF Coverage 30 MHz –
6 GHz. Integrated RF Switch. Portable Rugged Chassis with
Remote Operating Workstation. 28 V, DC powered
26
Processor
Ground
Data Ingest, Quick Look & Analysis System; Provides
Processor
Sophisticated Processing Suite of Software for
Non-standardized Signals of Interest
27
Signal
Sentry Node
120V AC/60Hz Outdoor-rated Passive Signal Collection System
ASY00168-01
$165,000
Sentry Node
230V AC/50Hz Outdoor-rated Passive Signal Collection System
ASY00169-01
$165,000
Sentry+ Node
120V AC/60Hz Outdoor-rated Passive Signal Collection System
ASY00170-01
$252,000
ASY00171-01
$252,000
Collection
System
27
Signal
Collection
System
28
Signal
Collection
with Built-in Arbitrary Waveform Generation
System
28
Signal
Sentry+ Node
230V AC/50Hz Outdoor-rated Passive Signal Collection System
Collection
with Built-in Arbitrary Waveform Generation
System
29
Signal
Sentry Amp Box
120V AC/60Hz Outdoor-rated RF Amplification System
ASY00172-01
$108,000
Sentry Amp Box
230V AC/50Hz Outdoor-rated RF Amplification System
ASY00173-01
$108,000
28V DC RF Conditioning Unit Features Multi-band
ASY00174-01
$48,000
MTA-00171
$34,000
ASY00186-01
-02, -03, -04
$85,000
each
Collection
System
29
Signal
Collection
System
30
Signal
Sentry RFCU
Collection
Amplification and Filtering
System
31
Amplifier
MTA-100
2U Rack Mounted Amplifier Assembly RF Coverage
100 MHz – 1 GHz
32
Amplifier
MTA-610
3U Rack Mounted Amplifier System; RF Coverage
20 MHz – 6 GHz (4 Output Port / Keylock Switch Options)
All trademarks and registered marks are the property of their respective owners.
2016 Hardware Catalog
Index
Page Family
Description
System
Part Number
Price (Qty. 1)
33
Simulator
Rattler Simulator
Portable Signal Simulator. Frequency Range 400 MHz – 4.4 GHz ASY00064-01
$21,000
33
Simulator
Rattler Simulator
Portable Signal Simulator. Frequency Range 50 MHz – 2.2 GHz
ASY00066-01
$21,000
34
Simulator
Playback System
Rack Mountable 5U Signal Playback System
ASY00056-01
$56,000
35
Simulator
Enhanced Playback
Rack Mountable 4U Signal Playback System
ASY00056-02
$97,000
1.8-meter Parabolic Reflector with Vertically Polarized
AS1.8R0.8-6.0
$187,000
AS1.2R0.8-6.0
$179,000
System
37
Antenna
High-Gain Antenna
Feed. RF Coverage 800 MHz – 6 GHz. Integrated Dual-Axis
Positioner with Dual Slip Rings and Controller
38
Antenna
High-Gain Antenna
1.2-meter Parabolic Reflector with Vertically Polarized
Feed.
RF Coverage 800 MHz – 6 GHz. Integrated Dual-Axis
Positioner with Dual Slip Rings and Controller
39
Antenna
High-Gain Antenna
with Transmit
1.2-meter Parabolic Primary Reflector with Vertically Polarized
AS1.2R0.8-6.0BR $186,000
Feed. RF Coverage 800 MHz – 6 GHz. Integrated Secondary
Vertically Polarized Log-Periodic Array. RF Coverage 100 MHz
– 1 GHz. Integrated Dual-Axis Positioner with Dual Slip Rings
and Controller
40
Antenna
Offset Feed
Offset Feed Reflector with Vertically Polarized Feed.
Reflector Antenna
RF Coverage 800 MHz – 6 GHz. Integrated Single Axis
AS0.3R0.8-6.0
$97,000
TCA 0.2-0.6
$36,000
TCADP 0.2-0.6
$206,000
ASY00042-01
$48,000
Positioner with Slip Ring and Controller
41
Antenna
UHF Tightly
Coupled Array
Tightly Coupled Array Vertically Polarized UHF Antenna.
Frequency Range 200 MHz – 600 MHz with Integrated
Radome and Single Axis Positioner with Slip Ring
42
Antenna
Dual-Pol TCA
Dual-Polarization Tightly Coupled Array UHF Antenna.
Frequency Range 200 MHz – 600 MHz.
43
RF Component
4x8 RF Switch
Matrix
Non-Blocking RF Matrix Switch. 8 Input Ports, 4 Output
Ports. Frequency Range 50 MHz – 6 GHz
44
RF Component
RFCU-LSC
L/S/C Band RF Conditioning Unit with Integrated Noise Source
ASY00036-01
$21,000
44
RF Component
RFCU-Uv2
UHF RF Conditioning Unit with Integrated Noise Source.
ASY00037-01
$18,000
ASY00052-02
$17,000
4 Input Ports, 4 Output Ports
44
RF Component
RFCU-PCU
RF Conditioning Unit Power Control Unit
Visit us online for more information about our SIGINT Solutions:
www.caci.com
All trademarks and registered marks are the property of their respective owners.
2016 Hardware Catalog
Index
Page Family
System
Description
Part Number
Price (Qty. 1)
45
Prototype
Sparrowhawk
SIGINT Detection for Airborne Platform
ASY00197-01
N/A
46
Prototype
Thrasher
SIGINT Detection for Airborne Platform
ASY00196-01
N/A
47
Prototype
Electronically
Compact Wide-band Antenna System Capable of
ASY00132-01
N/A
Steered Array
120 Degree Beam Steering in the Azimuth Plane
(ESA)
Accessory
SC Antenna Mast
3-meter Aluminum Mast for use with SC Class Antennas
ASY00134-01
$4,200
Accessory
Positioner Tripod
Portable Aluminum Tripod for use with AS Class Antenna
ASY00135-01
$13,000
Dual-Pol TCA
Dual-Axis Positioner with Dual Slip Rings, Controller and
ASY00136-01
$133,000
ASY00137-01
$150,000
ASY00094-01
$540
ASY00138-01
$62,000
ASY00229-03
$105,000
Accessory
2-Axis Positioner
Aluminum Tripod. For use with TCADP Antenna
with Tripod
Accessory
Dual-Pol TCA
Dual-Axis Positioner with Dual Slip Rings, Controller, Riser
2-Axis Positioner
and 8-foot Radome and Base. For use with TCADP Antenna
with Radome
Accessory
Accessory
Antenna RF
RF Input Cable Kit Including 100-foot LMR400 Cable and
Cable Kit
Connection Accessories. Requires One Kit Per Input Channel
R4D2+ RF
Upgrade kit for existing R4D2+ Processors to Provide Software
Modulation
Defined Modulations and Waveforms
Upgrade Kit
Accessory
R5G4 Upgrade Kit
Upgrade Kit for Existing R5G4 Processors to Provide Digital
Receivers and Frequency Range up to 6 GHz
Accessory
Drive Pack
Four (4) SSD Drive Pack Providing up to 4 TB of RAID Storage
All trademarks and registered marks are the property of their respective owners.
FRU-00067
$4,100
2016 Hardware Catalog
STC Portable Spectrum Analysis
The STC combines hardware and software components into a portable Radio Frequency (RF) detection and monitoring system that is
small, lightweight, and easy to use. The software application interface is designed so a user with minimal RF knowledge can operate
it, but also provides all the tools an experienced operator needs to accomplish the mission. The STC is intended to be used by
professionals for RF signals tests and measurements, spectrum management and laboratory applications. It is ideal for use by Wi-Fi
and cellular providers performing signal strength verification, or identifying unlicensed transmissions. Whether performing security
services, or Federal Communications Commission (FCC) compliance testing, the STC’s intuitive software design will meet your current
and long-term mission needs.
Multiple Uses:
• Spectrum Management
• Wi-Fi Detection and Signal Verification
• RF Test and Measurement
• Security Services
• FCC Compliance Testing
• Executive Travel Support: Nowhere is an
executive more vulnerable than when away
from his established security measures.
Part Number: 6A
Basic Unit Price: $39,000
8
Visit us online for more information about our SIGINT Solutions:
www.caci.com/CACI-SystemWare
All trademarks and registered marks are the property of their respective owners.
2016 Hardware Catalog
STC Portable Spectrum Analysis
Hardware
Features
STC Specifications
• STC (1 kHz – 26 GHz)
• Frequency Range: 1 kHz – 26 GHz RF
• Wireless or Ethernet control
• Input: 50 ohms
• 1-2 Hour Battery Life (Battery Dependent)
• Maximum RF Input: +15 dBm
• Portable and Lightweight
• Power Consumption: 65 Watts
• User-Definable Sweep Parameters
• Touch Screen LCD
• Discrete Frequency Scans with Individual Channel Settings
• Dimensions: 13.25" x 14.75" x 5.25"
• Automated and Remote Functions Allow the System to Run
• Weight: 15 lbs
• Unattended Port Switch Capable
• Operating Temperature: 0° to +50° C
• Zoom Displays for Better Analysis and Signal Measurements
• Commercial GPS
• Real-Time Signal Analysis
• Dynamically Adjustable Threshold Sensitivity
Software
• Signals of Interest Displayed via User-Defined Limits
Sweep the RF Spectrum with User-Defined Frequency Parameters
• Signals are Presented in Multiple, Easy to Read Formats
• Maximum Sweep Speed up to 26 GHz/sec
• Display Zooming
• Frequency (Channel) Scan
Multiple Visual Representations of the RF Spectrum
• 2D Display
• Waterfall Display
• Signal of Interest Frequency List
Real-Time Signal Analysis
• Wireless Network Detection and Identification
• Analog Signal Demodulation (AM/FM)
• One-Button or Automatic Audio Recording
• Classification of Common Digital and Analog Signals
• Video Recreation (NTSC/PAL/SECAM)
Post-Collection Data Analysis Tools
Video Raster
• 2D Plot
• Colored Raster
• Consolidated Exceedance List
Compare Sweep
9
All trademarks and registered marks are the property of their respective owners.
2016 Hardware Catalog
RAIDER III
Raider III is a portable, fully functional, turn-key Radio Frequency (RF) collection and analysis platform. Its modular, durable, fan-less,
small form factor design, and low power consumption make it ideal for static or mobile application. Raider III can operate independently
or as part of a multi- sensor system through either direct or remote control. Sweep speeds of 80 GHz/s and new automated tools ensure
threat signals using modern technology are captured for real-time or post-collection analysis.
The Raider III’s unique monitoring software allows any user, regardless of experience level, to effectively and efficiently operate the
system with confidence. It utilizes web-based management for platform independent command and control. Raider III’s enhanced realtime or post-collection analysis capability include new Live Baseline Vetting Tools.
Multiple Uses
• Spectrum Mapping
• Communications Support
• Signal Verification
• High-Energy Searches
• RF Route Recon
• Threat Signal Identification
• Channel Scan
• Wireless Network Detection
• Real-Time Signal Searches
• Indications and Warnings
• SIGINT Database Development
• Frequency Management
Part Number: 7F
Basic Unit Price: $85,000
10
Visit us online for more information about our SIGINT Solutions:
www.caci.com/CACI-SystemWare
All trademarks and registered marks are the property of their respective owners.
2016 Hardware Catalog
RAIDER III
Hardware
• Frequency Range: 1 kHz – 18 GHz
• RF Input: 50 ohms
• Noise Figure: 12 dB typical
• Custom Broadband Microwave Receiver
• Dynamic Range: 110dB at IF
• Tuning Resolution: 1 kHz
• Capture Bandwidth: 40 MHz
• Network BW Consumption: > 250 kbs
Software and Features
Sweep the RF Spectrum with User-Defined Frequency Parameters
• Single or Multiple Sweep Segments over a 1 kHz – 18 GHz
Video Raster
• Maximum Sweep Speed <80 GHz/Sec
• Frequency (Channel) Scan
• Dynamic Re-Tasking of Sweep Parameters to Meet an
Immediate Collection Mission
Multiple Visual Representation of the RF Spectrum
• 2D/Persistence Trace
• Waterfall Display
• Resizable Displays
Real-Time Signal Analysis
Compare Sweep
• Signal of Interest Search
• Classify on the Fly
• IF Record
• Analog Signal Demodulation (AM/FM)
• One-Button or Automatic Audio Recording
• Classification of Common Digital and Analog Signals
• Wireless Network Detection and Identification with GPS Tagging
• Video Recreation
• Wide Band (Short Duration) IF Snapshot Recording
Post-Collection Data Analysis Tools
• Signal of Interest Search
• 2D/Persistence Trace/Waterfall Display
• Signal Template and Fingerprint
• Consolidated Exceedance List Report
Save IF Data for Post-Collection
11
All trademarks and registered marks are the property of their respective owners.
2016 Hardware Catalog
DART
DART is a portable, fully functional Radio Frequency (RF) collection and analysis platform that can operate independently or be networked
as a multi-sensor system. Each DART is built with an on-board tuning module and processing module, embedded PC, and internal GPS.
This design enables the system to sweep extremely fast and provide a wide array of analysis tools that can be used in a real-time or
post-collection mode.
The DART can also be remotely monitored via any broadband connection utilizing CACI-SystemWare unique monitoring software. The
DART’s small form factor and powerful analysis capabilities make it an ideal platform for multiple collection mission profiles. Whether
in a single DART mode or networked together in a mutually supporting role, this system is ideal for static or mobile collection missions.
Multiple Uses
• Spectrum Mapping
• RF Route Recon
• Real-Time Signal Searches
• Threat Signal Identification
• Wireless Network Detection
• Indications and Warnings
• Signal Verification
• Channel Scan
• SIGINT Database Development
• Communications Support
• High-Energy Searches
Part Number: 17I
Basic Unit Price: $111,000
12
Homepage
Classify on the Fly
Wireless Test
Video Recreation
Visit us online for more information about our SIGINT Solutions:
www.caci.com/CACI-SystemWare
All trademarks and registered marks are the property of their respective owners.
2016 Hardware Catalog
DART
Hardware
Features
User Definable Sweep Parameters
• Frequency Range: 1 kHz – 20 GHz
• RF Input: 50 ohms
• Multiple Segmented Sweeps Allow the User to Focus on
• Maximum RF Input: +20 dBm
Specific Ranges of the Spectrum
• Power: 12-16 VDC (89 watts)
• Discrete Frequency Scans (channel scans) with Individual
• Receiver Dimensions 13.25" x 10" x 4.75"
• Receiver Weight: 15 lbs
Channel Settings
• Automated Functions and Extensive Scheduling Options
• Removable Hard Drive
Allow the System to Run Unattended
• Post-Collection Data Analysis and Playback of Recorded
Software
Audio Data
Sweep the RF Spectrum with User-Defined Frequency Parameters
• Single or Multiple Sweep Segments Over a 1 kHz – 20 GHz
Frequency Range • Intermediate Frequency (IF) Recorded Data with External
Raid Array
• Signal of Interest Search
• Maximum Sweep Speed up to 48 GHz/Sec at 8K Resolution • Classify on the Fly
• Frequency (Channel) Scan • Wideband (short duration) IF Snapshot Recording
• Dynamic Re-Tasking of Sweep Parameters to Meet an
• Automated Recording of Audio from Significant Signals
Immediate Collection Mission • Real-Time Signal Analysis
• Schedule Sweeps to Automatically Start Even when the
System is Unattended
• Dynamically Adjustable Baseline Offset and Signal
• Occurrence Settings to Easily Identify Signals of Interest
• Threat Signals are Highlighted when Signal Strength
Multiple Visual Representations of the RF Spectrum
• 2D or 3D Display
Exceeds User-Defined Limits
• Threat Signals are Presented in Multiple, Easy to Read Formats
• Finger-Scrolling & Resizable Displays
• Waterfall Display
• Threat Frequency List
• Gallery of User-Definable Displays
Real-Time Signal Analysis
• Signal of Interest Search
• Classify on the Fly
• IF Record
• Analog Signal Demodulation (AM/FM/AM PLS)
• One-Button or Automatic Audio-Recording
• Classification of Common Digital and Analog Signals
• Wireless Network Detection and Identification
• Video Recreation
Post-Collection Data Analysis Tools
• Signal of Interest Search
• 2D or 3D Plot
• Signal Template and Fingerprint
• Waterfall Display
• Consolidated Exceedance List
Save IF Data for Post-Collection
13
All trademarks and registered marks are the property of their respective owners.
CACI National and Cyber Solutions
Razorbill Rack-Mounted
Processor Family
Razorbill Processors are our top-of-the-line ruggedized, rack-mountable, general-purpose SIGINT collection
platforms. These systems have been developed as a host for X-Midas and other software-defined radio
applications running on the Linux operating system and can be ordered with our latest 3rd generation digital
tuners. Razorbill processors are specifically designed to tolerate harsh physical and thermal conditions and
are available in 4U and 5U configurations. These systems can be configured to incorporate up to 2 dualchannel independent built-in high-performance receivers, each with an instantaneous bandwidth of 30 MHz
and frequency ranges up to 6 GHz. Razorbill systems can be configured with up to 9 TB of self-encrypting
storage using SAS storage drives or be equipped with solid state storage devices. Razorbill 5U systems contain
integrated LTO tape drives, while 4U chassis are configured to connect to external tape drives. Razorbill
processors equipped with output options are compatible with MTA class amplifier systems.
2016 Hardware Catalog
Razorbill Options/Configurations
Razorbill R4D2 System
Razorbill R4D2+ V2 System
Part Number: ASY00117-01
Part Number: ASY00061-01
4U Rack Mounted System with 2 Input Channels
4U Rack Mounted System with 2 Input Channels and
Height: 4U, 7 inches
1 Software-Defined Output Channel
Width: 19 inches
Height: 4U, 7 inches
Depth: 25.75 inches
Width: 19 inches
Weight: 65 lbs
Depth: 25.75 inches
Processor: Dual deca-core Intel Xeon E5-2680-v2 CPUs
Weight: 65 lbs
Receivers: 1x dual-channel
Processor: Dual deca-core Intel Xeon E5-2680-v2 CPUs
Receivers: 1x dual-channel
30 MHz – 6 GHz
30 MHz Max. Bandwidth
30 MHz – 6 GHz
Digital Output
30 MHz Max. Bandwidth
Input Channels: 2
Digital Output
Output Channels: None
Input Channels: 2
Storage: 1x 256 GB SSD (OS)
Output Channels: 1 (software-defined bit stream and waveform)
10x 600 GB SAS Drives (6 TB RAID)
Tape Drive: External LTO-5; Can write LTO-4 tapes
Storage: 1x 256 GB SSD (OS)
10x 600 GB SAS Drives (6 TB RAID)
Memory: 64 GB DDR3, 1600 MHz
Tape Drive: External LTO-5; Can write LTO-4 tapes
Connections: 2x RF Inputs (N/F)
Memory: 64 GB DDR3, 1600 MHz
Connections: 2x RF Inputs (N/F)
1x 1 PPS (SMA/F)
1x 10 MHz Ref (SMA/F)
1x RF Outputs (SMA/F)
1x Spare (SMA/F)
1x 1 PPS (SMA/F)
2x USB 2.0 (Type A)
1x 10 MHz Ref (SMA/F)
2x Gigabit Ethernet (RJ-45)
1x Spare (SMA/F)
1x VGA Output (DE-15)
2x USB 2.0 (Type A)
1x Mouse (USB)
2x Gigabit Ethernet (RJ-45)
1x Keyboard (USB)
1x VGA Output (DE-15)
2x SFF-8088 SAS (1 on Front, 1 on Rear)
1x Mouse (USB)
2x Power (C13)
1x Keyboard (USB)
Line Voltage: 100 – 240 VAC
2x SFF-8088 SAS (1 on Front, 1 on Rear)
Frequency: 47 – 63 Hz
2x Power (C13)
Maximum Continuous Power: 760 Watts
Line Voltage: 100 – 240 VAC
Operating Temperature: 10-deg C to 35-deg C
Frequency: 47 – 63 Hz
(50-deg F to 95-deg F)
Storage Temperature: -40-deg C to 70-deg C
(-40-deg F to 158-deg F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Maximum Continuous Power: 760 Watts
Operating Temperature: 10-deg C to 35-deg C
(50-deg F to 95-deg F)
Storage Temperature: -40-deg C to 70-deg C
(-40-deg F to 158-deg F)
Basic Unit Price: $130,000
Operating Relative Humidity: 8% to 90% (non-condensing)
Basic Unit Price: $188,000
15
All trademarks and registered marks are the property of their respective owners.
2016 Hardware Catalog
Razorbill Options/Configurations
Razorbill R5D0 System
Razorbill R5D2 System
Part Number: R5D0
Part Number: R5D2
5U Rack Mounted Processing System
5U Rack Mounted Processing System with 2 Input Channels
Height: 5U, 8.75 inches
Height: 5U, 8.75 inches
Width: 19 inches
Width: 19 inches
Depth: 21.25 inches
Depth: 21.25 inches
Weight: 70 lbs
Weight: 85 lbs
Processor: Dual deca-core Intel Xeon E5-2680-v2 CPUs
Processor: Dual deca-core Intel Xeon E5-2680-v2 CPUs
Receivers: None
Receivers: 1x dual-channel
Input Channels: N/A
30 MHz – 6 GHz
Output Channels: None
30 MHz Max. Bandwidth
Storage: 1x 256 GB SSD (OS)
Digital Output
8x 600 GB SAS Drives (4.8 TB RAID)
Input Channels: 2
Integrated Tape Drive: Internal LTO-5; Can write LTO-4 tapes
Output Channels: None
Memory: 64 GB DDR3, 1600 MHz
Storage: 1x 256 GB SSD (OS)
Connections: 10x Gigabit Ethernet (RJ-45)
8x 600 GB SAS Drives (4.8 TB RAID)
1x VGA Output (DE-15)
Integrated Tape Drive: Internal LTO-5; Can write LTO-4 tapes
2x USB 2.0 (Type A)
Memory: 64 GB DDR3, 1600 MHz
2x Power (C13)
Connections: 2x RF Inputs (N/F)
Line Voltage: 100 – 240 VAC
1x 1 PPS (SMA/F)
Frequency: 47 – 63 Hz
1x 10 MHz Ref (SMA/F)
Maximum Continuous Power: 760 Watts
1x Spare (SMA/F)
Operating Temperature: 10-deg C to 35-deg C
2x USB 2.0 (Type A)
(50-deg F to 95-deg F)
Storage Temperature: -40-deg C to 70-deg C
(-40-deg F to 158-deg F)
Operating Relative Humidity: 8% to 90% (non-condensing)
2x Gigabit Ethernet (RJ-45)
1x VGA Output (DE-15)
1x Mouse (USB)
1x Keyboard (USB)
2x Power (C13)
Basic Unit Price: $40,000
Line Voltage: 100 – 240 VAC
Frequency: 47 – 63 Hz
Maximum Continuous Power: 760 Watts
Operating Temperature: 10-deg C to 35-deg C
(50-deg F to 95-deg F)
Storage Temperature: -40-deg C to 70-deg C
(-40-deg F to 158-deg F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Basic Unit Price: $129,000
16
Visit us online for more information about our SIGINT Solutions:
www.caci.com
All trademarks and registered marks are the property of their respective owners.
2016 Hardware Catalog
Razorbill Options/Configurations
Razorbill R5D2+ V2 System
Razorbill R5D2K System
Part Number: ASY00115-01
Part Number: R5D2K
5U Rack Mounted Processing System with 2 Input Channels and
5U Rack Mounted Processing System with 2 Input Channels
1 Software-Defined Output Channel
Height: 5U, 8.75 inches
Height: 5U, 8.75 inches
Width: 19 inches
Width: 19 inches
Depth: 21.25 inches
Depth: 21.25 inches
Weight: 85 lbs
Weight: 85 lbs
Processor: Dual deca-core Intel Xeon E5-2680-v2 CPUs
Processor: Dual deca-core Intel Xeon E5-2680-v2 CPUs
Receivers: 1x dual-channel
Receivers: 1x dual-channel
30 MHz – 6 GHz
30 MHz – 6 GHz
30 MHz Max. Bandwidth
30 MHz Max. Bandwidth
Digital Output
Input Channels: 2
Digital Output
Input Channels: 2
Output Channels: None
Output Channels: 1
Storage: 1x 256 GB SSD (OS)
Storage: 1x 256 GB SSD (OS)
16x 600 GB SAS Drives (9.6 TB RAID)
8x 600 GB SAS Drives (4.8 TB RAID)
1x Trayless Hot-swappable SSD Drive Bay
Integrated Tape Drive: Internal LTO-5; Can write LTO-4 tapes
Integrated Tape Drive: None
Memory: 64 GB DDR3, 1600 MHz
Memory: 64 GB DDR3, 1600 MHz
Connections: 2x RF Inputs (N/F)
Connections: 2x RF Inputs (SMA/F)
1x RF Output (SMA/F)
1x 1 PPS (SMA/F)
1x 1 PPS (SMA/F)
1x 10 MHz Ref (SMA/F)
1x 10 MHz Ref (SMA/F)
1x Spare (SMA/F)
1x Spare (SMA/F)
2x USB 2.0 (Type A)
2x USB (Type A)
2x USB 3.0 (Type A)
2x Gigabit Ethernet (RJ-45)
1x USB 3.0 Front Panel (Type A)
1x VGA Output (DE-15)
2x Gigabit Ethernet (RJ-45)
1x Mouse (USB)
1x DVI (DVI-I Dual Link)
1x Keyboard (USB)
1x Mouse (USB)
2x Power (C13)
1x Keyboard (USB)
Line Voltage: 100 – 240 VAC
2x Power (C13)
Frequency: 47 – 63 Hz
2x SFF-8088 SAS (2 on rear)
Maximum Continuous Power: 760 Watts
Line Voltage: 100 – 240 VAC
Operating Temperature: 10-deg C to 35-deg C
Frequency: 47 – 63 Hz
(50-deg F to 95-deg F)
Storage Temperature: -40-deg C to 70-deg C
(-40-deg F to 158-deg F)
Maximum Continuous Power: 760 Watts
Operating Temperature: 10-deg C to 35-deg C
(50-deg F to 95-deg F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Storage Temperature: -40-deg C to 70-deg C
Basic Unit Price: $190,000
Operating Relative Humidity: 8% to 90% (non-condensing)
(-40-deg F to 158-deg F)
Basic Unit Price: $129,000
17
All trademarks and registered marks are the property of their respective owners.
2016 Hardware Catalog
Razorbill Options/Configurations
Razorbill R5D4 System
Razorbill R5D4Q System
Part Number: R5D4
Part Number: R5D4Q
5U Rack Mounted Processing System with 4 Input Channels
5U Rack Mounted Processing System with 4 Input Channels
Height: 5U, 8.75 inches
Height: 5U, 8.75 inches
Width: 19 inches
Width: 19 inches
Depth: 21.25 inches
Depth: 21.25 inches
Weight: 85 lbs
Weight: 85 lbs
Processor: Dual deca-core Intel Xeon E5-2680-v2 CPUs
Processor: Dual deca-core Intel Xeon E5-2680-v2 CPUs
Receivers: 2x dual-channel
Receivers: 2x dual-channel
30 MHz – 6 GHz
30 MHz – 6 GHz
30 MHz Max. Bandwidth
30 MHz Max. Bandwidth
Digital Output
Digital Output
Input Channels: 4
Input Channels: 4
Output Channels: None
Output Channels: None
Storage: 1x 256 GB SSD (OS)
Storage: 1x 256 GB SSD (OS)
16x 600 GB SAS Drives (9.6 TB RAID)
Integrated Tape Drive: Internal LTO-5; Can write LTO-4 tapes
16x 960 GB SSD Drives (15.3 TB RAID)
1x Trayless Hot-swappable SSD Drive Bay
Memory: 64 GB DDR3, 1600 MHz
Integrated Tape Drive: None
Connections: 4x RF Inputs (N/F)
Memory: 64 GB DDR3, 1600 MHz
Connections: 4x RF Inputs (SMA/F)
1x 1 PPS (SMA/F)
1x 10 MHz Ref (SMA/F)
1x 1 PPS (SMA/F)
1x Spare (SMA/F)
1x 10 MHz Ref (SMA/F)
2x Gigabit Ethernet (RJ-45)
2x USB 2.0 (Type A)
1x VGA Output (DE-15)
2x USB 3.0 (Type A)
1x Mouse (USB)
1x USB 3.0 Front Panel (Type A)
1x Keyboard (USB)
2x Gigabit Ethernet (RJ-45)
2x Power (C13)
1x DVI (DVI-I Dual Link)
Line Voltage: 100 – 240 VAC
1x Mouse (USB)
Frequency: 47 – 63 Hz
1x Keyboard (USB)
Maximum Continuous Power: 760 Watts
2x Power (C13)
Operating Temperature: 10-deg C to 35-deg C
(50-deg F to 95-deg F)
Storage Temperature: -40-deg C to 70-deg C
(-40-deg F to 158-deg F)
Operating Relative Humidity: 8% to 90% (non-condensing)
2x SFF-8088 SAS (2 on rear)
Line Voltage: 100 – 240 VAC
Frequency: 47 – 63 Hz
Maximum Continuous Power: 760 Watts
Operating Temperature: 10-deg C to 35-deg C
(50-deg F to 95-deg F)
Basic Unit Price: $190,000
Storage Temperature: -40-deg C to 70-deg C
(-40-deg F to 158-deg F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Basic Unit Price: $185,000
18
Visit us online for more information about our SIGINT Solutions:
www.caci.com
All trademarks and registered marks are the property of their respective owners.
2016 Hardware Catalog
Razorbill Options/Configurations
Razorbill R5D4X10-IF System
Part Number: ASY00229-02
5U Rack Mounted Processing System with 2 Input Channels
(4 digital receiver channels)
Height: 5U, 8.75 inches
Width: 19 inches
Depth: 21.25 inches
Weight: 85 lbs
Processor: Dual dodeca-core Intel Xeon E5-2680-v3 CPUs
Receivers: 2x dual-channel
30 MHz – 6 GHz
30 MHz Max. Bandwidth
Digital Output
Input Channels: 4
Output Channels: None
Storage: 1x 256 GB SSD (OS)
16x 600 GB SAS Drives (9.6 TB RAID)
Integrated Tape Drive: Internal LTO-5; Can write LTO-4 tapes
Memory: 128 GB DDR4, 2133 MHz
Connections: 1x RF Input (SMA/F)
1x IF Input (SMA/F)
1x 1 PPS (SMA/F)
1x 10 MHz Ref (SMA/F)
2x Spare (SMA/F)
2x Gigabit Ethernet (RJ-45)
1x VGA Output (DE-15)
1x Mouse (USB)
1x Keyboard (USB)
2x Aux USB (USB)
2x Power (C13)
Line Voltage: 100 – 240 VAC
Frequency: 47 – 63 Hz
Maximum Continuous Power: 760 Watts
Operating Temperature: 10-deg C to 35-deg C
(50-deg F to 95-deg F)
Storage Temperature: -40-deg C to 70-deg C
(-40-deg F to 158-deg F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Basic Unit Price: $198,000
19
All trademarks and registered marks are the property of their respective owners.
2016 Hardware Catalog
Razorbill Capability Matrix
System
R4D2
R4D2+V2
R5D0
R5D2
Height
Width
Depth
Weight
4U, 7 inches
19 inches
25.75 inches
65 lbs
4U, 7 inches
19 inches
25.75 inches
65 lbs
5U, 8.75 inches
19 inches
21.25 inches
70 lbs
5U, 8.75 inches
19 inches
21.25 inches
80 lbs
Processor
Dual deca-core
Dual deca-core
Intel Xeon E5-2680-v2 CPUs Intel Xeon E5-2680-v2 CPUs
Dual deca-core
Intel Xeon E5-2680-v2 CPUs
Dual deca-core
Intel Xeon E5-2680-v2 CPUs
Receivers
1X dual-channel
30 MHz – 6 GHz
30 MHz Max. Bandwidth
Digital Output
1X dual-channel
30 MHz – 6 GHz
30 MHz Max. Bandwidth
Digital Output
None
1X dual-channel
30 MHz – 6 GHz
30 MHz Max. Bandwidth
Digital Output
Input Channels
Output Channels
2
0
2
1
0
0
2
0
Storage
1X 256 GB SSD (OS)
10X 600 GB SAS Drives
(6 TB RAID)
1X 256 GB SSD (OS)
10X 600 GB SAS Drives
(6 TB RAID)
1X 256 GB SSD (OS)
8X 600 GB SAS Drives
(4.8 TB RAID)
1X 256 GB SSD (OS)
8X 600 GB SAS Drives
(4.8 TB RAID)
Integrated Tape Drive
External LTO-5;
Can write LTO-4 tapes
External LTO-5;
Can write LTO-4 tapes
LTO-5;
Can write LTO-4 tapes
LTO-5;
Can write LTO-4 tapes
Memory
64 GB DDR3, 1600 MHz
64 GB DDR3, 1600 MHz
64 GB DDR3, 1600 MHz
64 GB DDR3, 1600 MHz
Connections
2X RF Inputs (N/F)
1X 1PPS (SMA/F)
1X 10 MHz Ref (SMA/F)
1X Spare (SMA/F)
2X USB 2.0 (Type A)
2X Gigabit Enet (RJ-45)
1X VGA Output (DE-15)
1X Mouse (USB)
1X Keyboard (USB)
2X SFF-8088 SAS
(1 on Front, 1 on Rear)
2X Power (C13)
2X RF Inputs (N/F)
1X RF Output (SMA/F)
1X 1PPS (SMA/F)
1X 10 MHz Ref (SMA/F)
1X Spare (SMA/F)
2X USB 2.0 (Type A)
2X Gigabit Enet (RJ-45)
1X VGA Output (DE-15)
1X Mouse (USB)
1X Keyboard (USB)
2X SFF-8088 SAS
(1 on Front, 1 on Rear)
2X Power (C13)
10X Gigabit Enet (RJ-45)
1X VGA Output (DE-15)
2X USB 2.0 (Type A)
2X Power (C13)
2X RF Inputs (N/F)
1X 1PPS (SMA/F)
1X 10 MHz Ref (SMA/F)
1X Spare (SMA/F)
2X USB 2.0 (Type A)
2X Gigabit Enet (RJ-45)
1X VGA Output (DE-15)
1X Mouse (USB)
1X Keyboard (USB)
2X Power (C13)
Line Voltage
Frequency
Max Continuous Power
100 – 240 VAC
47 – 63 Hz
760 Watts
100 – 240 VAC
47 – 63 Hz
760 Watts
100 – 240 VAC
47 – 63 Hz
760 Watts
100 – 240 VAC
47 – 63 Hz
760 Watts
Operating Temperature
10-deg C to 35-deg C
(50-deg F to 95-deg F)
10-deg C to 35-deg C
(50-deg F to 95-deg F)
10-deg C to 35-deg C
(50-deg F to 95-deg F)
10-deg C to 35-deg C
(50-deg F to 95-deg F)
Storage Temperature
-40-deg C to 70-deg C
(-40-deg F to 158-deg F)
-40-deg C to 70-deg C
(-40-deg F to 158-deg F)
-40-deg C to 70-deg C
(-40-deg F to 158-deg F)
-40-deg C to 70-deg C
(-40-deg F to 158-deg F)
Operating Relative
Humidity
8% to 90%
(non-condensing)
8% to 90%
(non-condensing)
8% to 90%
(non-condensing)
8% to 90%
(non-condensing)
Electrical/Environmental
Requirements
20
Visit us online for more information about our SIGINT Solutions:
www.caci.com
All trademarks and registered marks are the property of their respective owners.
2016 Hardware Catalog
Razorbill Capability Matrix
R5D2+V2
R5D2K
R5D4
R5D4Q
R5D4X10-IF
5U, 8.75 inches
19 inches
21.25 inches
85 lbs
5U, 8.75 inches
19 inches
21.25 inches
85 lbs
5U, 8.75 inches
19 inches
21.25 inches
85 lbs
5U, 8.75 inches
19 inches
21.25 inches
85 lbs
5U, 8.75 inches
19 inches
21.25 inches
85 lbs
Dual deca-core
Dual deca-core
Intel Xeon E5-2680-v2 CPUs Intel Xeon E5-2680-v2 CPUs
Dual deca-core
Dual deca-core
Intel Xeon E5-2680-v2 CPUs Intel Xeon E5-2680-v2 CPUs
Dual dodeca-core
Intel Xeon E5-2680-v3 CPUs
1X dual-channel
30 MHz – 6 GHz
30 MHz Max. Bandwidth
Digital Output
1X dual-channel
30 MHz – 6 GHz
30 MHz Max. Bandwidth
Digital Output
2X dual-channel
30 MHz – 6 GHz
30 MHz Max. Bandwidth
Digital Output
2X dual-channel
30 MHz – 6 GHz
30 MHz Max. Bandwidth
Digital Output
2X dual-channel
30 MHz – 6 GHz
30 MHz Max. Bandwidth
Digital Output
2
1
2
0
4
0
4
0
4
0
1X 256 GB SSD (OS)
8X 600 GB SAS Drives
(4.8 TB RAID)
1X 256 GB SSD (OS)
16X 600 GB SAS Drives
(9.6 TB RAID)
1X Trayless Hot-swappable
SSD Drive Bay
1X 256 GB SSD (OS)
16X 600 GB SAS Drives
(4.8 TB RAID)
1X 256 GB SSD (OS)
16X 960 GB SSD Drives
(15.3 TB RAID)
1X Trayless Hot-swappable
SSD Drive Bay
1x 256 GB SSD (OS)
16x 600 GB SAS Drives
(9.6 TB RAID)
LTO-5;
Can write LTO-4 tapes
None
LTO-5;
Can write LTO-4 tapes
None
LTO-5;
Can write LTO-4 tapes
64 GB DDR3, 1600 MHz
64 GB DDR3, 1600 MHz
64 GB DDR3, 1600 MHz
64 GB DDR3, 1600 MHz
128 GB DDR4, 2133 MHz
2X RF Inputs (N/F)
1X RF Output (SMA/F)
1X 1PPS (SMA/F)
1X 10 MHz Ref (SMA/F)
1X Spare (SMA/F)
2X USB 2.0 (Type A)
2X Gigabit Enet (RJ-45)
1X VGA Output (DE-15)
1X Mouse (USB)
1X Keyboard (USB)
2X Power (C13)
2X RF Inputs (SMA/F)
1X 1PPS (SMA/F)
1X 10 MHz Ref (SMA/F)
1X Spare (SMA/F)
2X USB 2.0 (Type A)
2X USB 3.0 (Type A)
1X USB 3.0 Front Panel (Type A)
2X Gigabit Enet (RJ-45)
1X DVI (DVI-I Dual Link)
1X Mouse (USB)
1X Keyboard (USB)
2X Power (C13)
2X SFF-8088 SAS (2 on Rear)
4X RF Inputs (N/F)
1X 1 PPS (SMA/F)
1X 10 MHz Ref (SMA/F)
1X Spare (SMA/F)
2X Gigabit Enet (RJ-45)
1X VGA Output (DE-15)
1X Mouse (USB)
1X Keyboard (USB)
2X Power (C13)
4X RF Inputs (SMA/F)
1X 1 PPS (SMA/F)
1X 10 MHz Ref (SMA/F)
2X USB 2.0 (Type A)
2X USB 3.0 (Type A)
1X USB 3.0 Front Panel
(Type A)
2X Gigabit Enet (RJ-45)
1X DVI (DVI-I Dual Link)
1X Mouse (USB)
1X Keyboard (USB)
2X Power (C13)
2X SFF-8088 SAS (2 on Rear)
1x RF Input (SMA/F)
1x IF Input (SMA/F)
1x 1 PPS (SMA/F)
1x 10 MHz Ref (SMA/F)
2x Spare (SMA/F)
2x Gigabit Ethernet (RJ-45)
1x VGA Output (DE-15)
1x Mouse (USB)
1x Keyboard (USB)
2x Aux USB (USB)
2x Power (C13)
100 – 240 VAC
47 – 63 Hz
760 Watts
100 – 240 VAC
47 – 63 Hz
760 Watts
100 – 240 VAC
47 – 63 Hz
760 Watts
100 – 240 VAC
47 – 63 Hz
760 Watts
100 – 240 VAC
47 – 63 Hz
760 Watts
10-deg C to 35-deg C
(50-deg F to 95-deg F)
10-deg C to 35-deg C
(50-deg F to 95-deg F)
10-deg C to 35-deg C
(50-deg F to 95-deg F)
10-deg C to 35-deg C
(50-deg F to 95-deg F)
10-deg C to 35-deg C
(50-deg F to 95-deg F)
-40-deg C to 70-deg C
(-40-deg F to 158-deg F)
-40-deg C to 70-deg C
(-40-deg F to 158-deg F)
-40-deg C to 70-deg C
(-40-deg F to 158-deg F)
-40-deg C to 70-deg C
(-40-deg F to 158-deg F)
-40-deg C to 70-deg C
(-40-deg F to 158-deg F)
8% to 90%
(non-condensing)
8% to 90%
(non-condensing)
8% to 90%
(non-condensing)
8% to 90%
(non-condensing)
8% to 90%
(non-condensing)
21
All trademarks and registered marks are the property of their respective owners.
2016 Hardware Catalog
Universal Processors
Universal Receiver Chassis
The Universal Receiver chassis is a rack mounted receiver
assembly. The unit consists of four receivers that can be
configured to meet specific mission requirements.
Part Number: ASY00145-nn (see configuration options below)
Configuration Options:
Part Number
30 MHz – 6 GHz
Input Channels
30 MHz – 18 GHz
Input Channels
ASY00145-018
0
ASY00145-020
4
ASY00145-034
2
Height: 3U, 5.25 inches
Instantaneous RF Bandwidth: 30 MHz / channel
Output Stream: SDDS Packetized Data
Connections: 8x Gigabit Ethernet (RJ-45)
1x 1PPS (SMA/F)
1x 10 MHz Ref (SMA/F)
1x Power (C13)
Input Power: 100 – 265 VAC
Power Frequency: 47 – 440 Hz
Maximum Continuous Power: 150W
Operating Temperature: 10-deg C to 35-deg C
(50-deg F to 95-deg F)
Storage Temperature: -40-deg C to 70-deg C
(-40-deg F to 158-deg F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Basic Unit Price: ASY00145-01: $151,000
ASY00145-02: $194,000
ASY00145-03: $171,000
22
Visit us online for more information about our SIGINT Solutions:
www.caci.com
All trademarks and registered marks are the property of their respective owners.
2016 Hardware Catalog
Universal Processors
Universal Simulator Chassis
The Universal Simulator chassis provides two highly
customizable simulated signal outputs with frequency
capability from 10 MHz – 6 GHz.
Part Number: ASY00146-01
Height: 2U, 3.5 inches
Width: 19 inches
Depth: 20 inches
Weight: 10 lbs
Output Channels: 2
Output Power: up to 15 dBm
Frequency Accuracy: 2.5 ppm
Connections: 2x RF Outputs (SMA/F)
2x 1 PPS (SMA/F)
2x 10 MHz Ref (SMA/F)
2x Gigabit Ethernet (RJ-45)
1x Power (C13)
Line Voltage: 100 – 240 VAC
Frequency: 47 – 63 Hz
Power Requirements: ~15 Watts
Operating Temperature: 0-deg C to 55-deg C
(32-deg F to 131-deg F)
Basic Unit Price: $25,000
23
All trademarks and registered marks are the property of their respective owners.
CACI National and Cyber Solutions
Kite Portable
Processor Family
BIT Systems manufactures a family of high performance wideband SIGINT collection and processing systems.
These systems are in use by a variety of DoD and
Civilian agencies. All BIT Systems hardware solutions are
modular and scalable and can be specifically configured to meet customer requirements.
Kite Processors are portable ruggedized general-purpose SIGINT collection platforms. These systems have
been developed as a host for X-Midas and other software-defined radio applications running on the Linux
operating system. Kite processors incorporate dual-channel coherent digital tuners with a frequency range of
30 MHz – 6 GHz and instantaneous bandwidths of 30 MHz each. Inside the processing unit is an integrated 2x2
non-blocking matrix switch. The processor includes an integrated GPS receiver capable of providing precision
timing and 1 Pulse Per Second (PPS) inputs to the tuners. Kite processors utilize solid state storage devices and
come with 3.8 TB of internal storage.
Kite processors are headless and each system comes with a 15” rugged laptop for controlling the system.
Kite processors can also be controlled via Virtual Network Console connections to any external display. Kite
systems can be ordered to operate on AC or DC power. Each processor comes complete with an external LTO-5
tape drive, basic user documentation, and rugged shipping containers.
* All prices are for specific stock configurations. Quotes for customized configurations are available upon request.
2016 Hardware Catalog
Kite Portable Processor Family
Kite K9D2S – AC Processor
Kite K9D2S – DC Processor
Part Number: ASY00175-01
Part Number: ASY00176-01
Height: 8.5 inches
Height: 8.5 inches
Width: 9.0 inches
Width: 9.0 inches
Depth: 24.2 inches
Depth: 24.2 inches
Weight: 38 lbs
Weight: 38 lbs
Processor: Dual dodeca-core Intel Xeon E5-2680-v3 CPUs
Processor: Dual dodeca-core Intel Xeon E5-2680-v3 CPUs
Receivers: 1x dual-channel
Receivers: 1x dual-channel
30 MHz – 6 GHz
30 MHz – 6 GHz
30 MHz Max. Bandwidth
30 MHz Max. Bandwidth
Digital Output
Digital Output
Input Channels: 2
Input Channels: 2
Output Channels: None
Output Channels: None
Storage: 2x 256 GB SSD (OS)
Storage: 2x 256 GB SSD (OS)
4x 960 GB SSD (3.8 TB RAID)
4x 960 GB SSD (3.8 TB RAID)
Tape Drive: External LTO-5; Can write LTO-4 tapes
Tape Drive: External LTO-5; Can write LTO-4 tapes
Memory: 128 GB DDR4, 2133 MHz
Memory: 128 GB DDR4, 2133 MHz
Connections: 2x RF Inputs (SMA/F)
Connections: 2x RF Inputs (SMA/F)
1x GPS Antenna Connection (TNC/F)
1x GPS Antenna Connection (TNC/F)
2x Spare (SMA/F)
2x Spare (SMA/F)
2x USB (Type A)
2x USB (Type A)
2x Gigabit Ethernet (RJ-45)
2x Gigabit Ethernet (RJ-45)
1x SFF-8088 SAS
1x SFF-8088 SAS
1x VGA Output (DE-15)
1x VGA Output (DE-15)
1x Rugged Ethernet (Glenair 805)
1x Rugged Ethernet (Glenair 805)
1x Power (C13)
1x Power (MILSPEC CIRCULAR)
1x Grounding Lug
1x Grounding Lug
Line Voltage: 100 – 240 VAC
Line Voltage: 28 VDC
Frequency: 47 – 63 Hz
Frequency: N/A
Maximum Continuous Power: 400 Watts
Maximum Continuous Power: 400 Watts
Operating Temperature: 10-deg C to 35-deg C
Operating Temperature: 10-deg C to 35-deg C
(50-deg F to 95-deg F)
Storage Temperature: -40-deg C to 70-deg C
(-40-deg F to 158-deg F)
(50-deg F to 95-deg F)
Storage Temperature: -40-deg C to 70-deg C
(-40-deg F to 158-deg F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Operating Relative Humidity: 8% to 90% (non-condensing)
Basic Unit Price: $144,000
Basic Unit Price: $144,000
25
All trademarks and registered marks are the property of their respective owners.
2016 Hardware Catalog
Ground Processing System
The Ground Processor is a data ingest, quick look and analysis system providing a sophisticated processing suite of software for nonstandardized signals of interest. This system supports offloading data from removable drive packs to a Network Attached Storage (NAS)
in 9U of rack space and is delivered with an 18U rack. It is specifically designed to support airborne systems (KITE Portable Sensor and
Razorbill Processors with drive packs), so that the sensor can reside on the platform. The storage drives are easily removed and data
from them offloaded after a mission or set of missions. The server supports two quad disk drive packs and has a high speed network
connection for fast data offload to a 24TB NAS. The LTO-5 tape drive supports data offloading for shipment or storage. The system comes
complete with a KVM tray, UPS, and Adaptive Security Appliance (ASA) providing all rackmount components needed to facilitate fast data
ingest and analysis (only 2U server pictured).
Part Number: ASY00181-01
Height: 9U, 15.75 inches
Width: 19 inches
Depth: 29 inches
Weight: 434 lbs
Processor: 2x Intel Xeon E5-2680-v3 CPUs
Storage: 1x 256 GB SSD (OS)
8x 1 TB SSD (2x 4 TB Removable Drive Packs)
24TB of Network Attached Storage (24x 1.2TB Hard Drives)
1x LTO-5 Tape drive
Memory: 128 GB DDR4, 2133 MHz
Outgoing Connections: ASA Network Connections
Battery Backup: 3KVA UPS
Line Voltage: 160 - 294 VAC (Power to the UPS)
Frequency: 47-70 Hz (Power to the UPS)
Operating Temperature: 10-deg C to 35-deg C
(50-deg F to 95-deg F)
Storage Temperature: -40-deg C to 70-deg C
(-40-deg F to 158-deg F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Basic Unit Price: $168,000
26
Visit us online for more information about our SIGINT Solutions:
www.caci.com
All trademarks and registered marks are the property of their respective owners.
2016 Hardware Catalog
Sentry Options/Configurations
The Sentry Node is an outdoor-rated passive signal collection system. The system features 4 dual-channel independent high-performance
receivers, each with an instantaneous bandwidth of 30 MHz and frequency ranges up to 6 GHz. With an integrated 2.4 GHz Wi-Fi
detection capability and 2.4 GHz receive and transmit Wi-Fi capability, the Sentry node is well equipped for a wide variety of mission
sets. An integrated processor allows for software-defined digital signal processing at the node.
Sentry Node (Passive Detection)
Part Number: ASY00168-01, ASY00169-01
Height: 23.6 inches
Width: 34.1 inches
Depth: 14.5 inches
Weight: 105 lbs
Processor: Intel Xeon E5-2699-v3 CPU
Receivers: 2x Dual Channel
30 MHz – 6 GHz
30 MHz Max. Bandwidth per channel
Digital Output
Wideband RF Input Ports: 1
Wi-Fi RF Input Ports: 1
Output Channels: None
Storage: 1x 250 GB SSD
4x 1 TB SSD
Memory: 128 GB DDR4
2133 MHz
Connections: 1x RF Input (N/F)
1x Wi-Fi Input (N/F)
1x GPS Antenna Connection (N/F)
1x Ruggedized AC Power Input (MILSPEC)
1x RFCU I/O Connection (MILSPEC)
1x AMP I/O Connection (MILSPEC)
2x Ruggedized Ethernet (Rugged RJ-45)
2x Ruggedized Ethernet w/POE (Rugged RJ-45)
Configuration Options:
Part Number
Input Voltage
Input Power Frequency
Maximum Continuous Power
Power Type
ASY00168-01
120VAC60 Hz700 WattsSingle Phase
ASY00169-01
230VAC50 Hz700 WattsSingle Phase
Operating Temperature: -20-deg C to 45-deg C (-4-deg F to 113-deg F)
Storage Temperature: -40-deg C to 70-deg C (-40-deg F to 158-deg F)
Basic Unit Price: ASY00168-01: $165,000
ASY00169-02: $165,000
27
All trademarks and registered marks are the property of their respective owners.
2016 Hardware Catalog
Sentry Options/Configurations
The Sentry+ Node is an outdoor-rated passive signal collection system with built-in arbitrary waveform generation. The system features
4 dual-channel independent high-performance receivers, each with an instantaneous bandwidth of 30 MHz and frequency ranges up to
6 GHz. Wideband arbitrary waveforms can be created in two separate bands to allow for multi-band simultaneous RF output. With an
integrated 2.4 GHz Wi-Fi detection capability and 2.4 GHz receive and transmit Wi-Fi capability, the Sentry+ Node is well equipped for a
wide variety of mission sets. An integrated processor allows for software-defined digital signal processing at the node for both receive
and transmit capability.
Sentry+ Node (Passive Detection PLUS Active Mitigation)
Part Number: ASY00170-01, ASY00171-01
Height: 23.6 inches
Width: 34.1 inches
Depth: 14.5 inches
Weight: 110 lbs
Processor: Intel Xeon E5-2699-v3 CPU
Receivers: 2x Dual Channel
30 MHz – 6 GHz
30 MHz Max. Bandwidth per channel
Digital Output
Wideband RF Input Ports: 1
Wi-Fi RF Input Ports: 1
Output Channels: 2
Storage: 1x 250 GB SSD
4x 1 TB SSD
Memory: 128 GB DDR4, 2133 MHz
Connections: 1x RF Input (N/F)
1x RF Output (N/F)
1x Wi-Fi Input (N/F)
1x GPS Antenna Connection (N/F)
1x Ruggedized AC Power Input (MILSPEC)
1x RFCU I/O Connection (MILSPEC)
1x AMP I/O Connection (MILSPEC)
2x Ruggedized Ethernet (Rugged RJ-45)
2x Ruggedized Ethernet w/POE (Rugged RJ-45)
Configuration Options:
Part Number
Input Voltage
Input Power Frequency
Maximum Continuous Power
Power Type
ASY00170-01
120VAC60 Hz1000 WattsSingle Phase
ASY00171-01
230VAC50 Hz1000 WattsSingle Phase
Operating Temperature: -20-deg C to 45-deg C (-4-deg F to 113-deg F)
Storage Temperature: -40-deg C to 70-deg C (-40-deg F to 158-deg F)
Basic Unit Price: ASY00170-01: $252,000
ASY00171-01: $252,000
28
Visit us online for more information about our SIGINT Solutions:
www.caci.com
All trademarks and registered marks are the property of their respective owners.
2016 Hardware Catalog
Sentry Options/Configurations
The Sentry Amplifier is a powerful outdoor-rated RF amplification system. For systems that require high-power RF amplification, the
Sentry Amplifier provides more than 50W RF output across a wide frequency range and is designed to work in conjunction with the
Sentry+ Node. The Sentry Amplifier can be operated remotely via integrated communication interfaces. RF power output monitoring
is integral to the design and can be remotely queried.
Sentry Amplifier
Part Number: ASY00172-01, ASY00173-01
Height: 23.6 inches
Width: 34.1 inches
Depth: 14.5 inches
Weight: 110 lbs
Frequency coverage: 20 MHz – 6 GHz
Output power CW: 20 – 600 MHz: 80 Watts
800 MHz – 2.6 GHz: 100 Watts
2.8 – 6 GHz: 50 Watts
RF Inputs: 1
High Power RF Outputs: 3
Output Channels: 2
Remote control & monitoring: RS-485 or Ethernet TCP/IP
Connections: 1x RF Input (N/F)
3x RF Output (N/F)
1x Ruggedized AC Power Input (MILSPEC)
1x Controller I/O Connection (MILSPEC)
1x Auxiliary I/O Connection (MILSPEC)
1x Ruggedized Ethernet (Rugged RJ-45)
Configuration Options:
Part Number
Input Voltage
Input Power Frequency
Maximum Continuous Power
Power Type
ASY00172-01
120VAC60 Hz1200 WattsSingle Phase
ASY00173-01
230VAC50 Hz1200 WattsSingle Phase
Operating Temperature: -20-deg C to 45-deg C (-4-deg F to 113-deg F)
Storage Temperature: -40-deg C to 70-deg C (-40-deg F to 158-deg F)
Basic Unit Price: ASY00172-01: $108,000
ASY00173-01: $108,000
29
All trademarks and registered marks are the property of their respective owners.
2016 Hardware Catalog
Sentry Options/Configurations
The Sentry RF Conditioning Unit (RFCU) is specifically designed to maximize RF sensitivity in a variety of mission environments. The unit
features multi-band amplification and filtering to maximize overall system performance when used in conjunction with Sentry or Sentry+
Nodes. Out-of-band RF interference is also minimized by the RFCU to ensure proper system performance.
The Sentry RFCU
Part Number: ASY00174-01
Height: 6.5 inches
Width: 13 inches
Depth: 15.5 inches
Weight: 24 lbs
Frequency Bands: 50 MHz – 1 GHz
1 GHz – 6 GHz
Number of RF Inputs: 2 (N/F)
Number of RF Outputs: 1 (N/F)
Enclosure: NEMA 4 type
Connections:
RF: N-Type
Power & Control: MIL Circular
28VDC
RS-485/2-wire
Basic Unit Price: $48,000
30
Visit us online for more information about our SIGINT Solutions:
www.caci.com
All trademarks and registered marks are the property of their respective owners.
2016 Hardware Catalog
MTA-100
The MTA-100 is a powerful rack-mounted RF amplification system. For systems requiring high-power RF output capability, the MTA-100
provides 100 Watts of output power over a wide frequency range. This system is designed to work in conjunction with our output-enabled
Razorbill processor family. The amplifier covers a wide frequency range of 20 MHz – 1 GHz. Remote control is achieved through an
integrated Ethernet TCP/IP controller.
Part Number: MTA-00171
Height: 2U / 3.5 inches
Depth: 20 inches
Frequency Range: 20 MHz – 1 GHz
Output Power CW: 100 Watts
Input Ports: 1 (SMA/F)
Output Ports: 1 (N/F)
Remote Control: Ethernet TCP/IP (RJ-45)
Input Power: 100 – 240 VAC
Frequency: 47 – 63 Hz
Maximum Continuous Power: 550 Watts
Basic Unit Price: $34,000
31
All trademarks and registered marks are the property of their respective owners.
2016 Hardware Catalog
MTA-610
The MTA-610 is a powerful rack-mounted wideband RF amplification system. For systems requiring high-power RF output capability, the
MTA-610 provides 50W to 100W over a wide frequency range. This system is designed to work in conjunction with our output-enabled
Razorbill processor family. The amplifier covers a wide frequency range of 20 MHz – 6 GHz. Remote control is achieved through an
integrated Ethernet TCP/IP controller. RF Power output monitoring is integrated in the design and can be remotely queried.
Part Number: ASY00186-01
Height: 3U / 5.25 inches
Depth: 20 inches
Frequency Range: 20 MHz – 6 GHz
Output Power CW: 20 – 600 MHz: 80 Watts
800 MHz – 2.6 GHz: 100 Watts
2.8 – 6 GHz: 50 Watts
Input Ports: 1 (N/F)
Output Ports and Security Keylock Switch Options:
ASY00186-01: 1 (Single-band switched output)
ASY00186-02: 1 (Single-band switched output with physical key switch control)
ASY00186-03: 3 (Three separate antenna outputs / one per RF band)
ASY00186-04: 3 (Three separate antenna outputs / one per RF band with physical key switch control)
Remote control and monitoring: RS-485 or Ethernet TCP/IP
Input Power: 100 – 265 VAC
Power Frequency: 47 – 440 Hz
Maximum Continuous Power: 1000 Watts
Operating Temperature: 10-deg C to 35-deg C (50-deg F to 95-deg F)
Storage Temperature: -40-deg C to 70-deg C (-40-deg F to 158-deg F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Basic Unit Price (all models): $85,000
32
Visit us online for more information about our SIGINT Solutions:
www.caci.com
All trademarks and registered marks are the property of their respective owners.
2016 Hardware Catalog
RATTLER Simulator
The RATTLER is a compact, portable signal emulator
designed to be utilized to test and train operators on the
usage of signal collection systems. The system is designed
to output a surrogate waveform of high visibility Signals Of
Interest (SOI) to aid in the training of operators. Additionally,
the system can be utilized as a pre-deployment system
check to provide to the appropriate maintenance channels.
Two frequency range options are available for SOI output
(50 MHz – 4.4 GHz or 400 MHz – 2.2 GHz).
The RATTLER is a single tabletop chassis system consisting
of a serialized transmission board, a touchscreen interface,
and a proprietary software suite. The chassis includes a
processor, a programmable software-defined radio, and a
Graphical User Interface (GUI) that is accessed through the
supplied touchscreen. The RATTLER software suite consists
of RATTLER signal emulation software running on the Red
Hat Enterprise Linux (RHEL) operating system.
Part Number: ASY00064-01 and ASY00066-01
Height: 6.5 inches
Width: 7 inches
Depth: 13 inches
Weight: 10 lbs
RF Connections: 2x SMA/F
Remote Command/Control: 1x Gigabit Ethernet (RJ-45)
External Display: HDMI
USB 2.0 Ports: 4
Power: 100 – 240 VAC @ 47 – 63 Hz
Maximum Continuous Power: 150 Watts
ASY00064-01
Frequency Range: 400 MHz – 4.4 GHz
Basic Unit Price: $21,000
ASY00066-01
Frequency Range: 50 MHz – 2.2 GHz
Basic Unit Price: $21,000
33
All trademarks and registered marks are the property of their respective owners.
2016 Hardware Catalog
Playback System PBSA
The Playback System Assembly (PBSA) is a rack-mountable signal replay platform designed to be utilized to test and train operators on
the usage of signal collection systems. The PBSA is designed to output previously recorded signals with the ability to remix them to user
controlled radio frequencies.
The PBSA is comprised of three major components occupying 5U of rack space: a 2U server with a Digital-To-Analog (DAC) card to
synthesize signals, a 1U tape drive chassis for large volume data transfer and a 2U signal generator that generates a carrier signal to mix
with the playback signal from the server’s DAC up to RF. The PBSA software suite runs on the Red Hat Enterprise Linux (RHEL) operating
system and consists of signal generator configuration, channel selection, and data offload functionality.
Part Number: ASY00056-01
Height: 5U, 8.75 inches
Width: 19 inches
Depth: 29 inches
Weight: 85 lbs
Processor: Dual hex-core Intel Xeon E5-2630-v2 CPUs
Input Channels: 0
Output Frequency: CH1: 10 MHz – 2 GHz;
CH2: 750 MHz – 6 GHz
Output Channels: 2
Storage: 1x 256 GB SSD (OS)
8x 600 GB SAS Drives (RAID)
Tape Drive: External LTO-5 (Rack Mounted, included); Can write LTO-4 tapes
Memory: 16 GB DDR3, 1600 MHz
Connections: 2x RF Outputs (N/F)
4x USB 2.0 (Type A)
2x Gigabit Ethernet (RJ-45)
1x VGA Output (DE-15)
4x Power (C13)
Line Voltage: 100 – 240 VAC
Frequency: 47 – 63 Hz
Maximum Continuous Power: 750 Watts
Operating Temperature: 10-deg C to 35-deg C
(50-deg F to 95-deg F)
Storage Temperature: -40-deg C to 70-deg C
(-40-deg F to 158-deg F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Basic Unit Price: $56,000
34
Visit us online for more information about our SIGINT Solutions:
www.caci.com
All trademarks and registered marks are the property of their respective owners.
2016 Hardware Catalog
Enhanced Playback System EPBSA
The Enhanced Playback System Assembly (EPBSA) is a rack-mountable signal capture and playback server designed to provide wideband
record and playback to support operator training on the use of signal collection systems. The EPBSA is designed to output previously
recorded signals with the ability to remix them to user controlled radio frequencies. The EPBSA is a single server solution occupying 4U
of rack space. The server has removable drive packs to allow for quick access of large signals. To support long duration recordings or
playback, the server has external SAS connections to support a large JBOD. The EPBSA software suite runs on the Red Hat Enterprise Linux
(RHEL) operating system and consists of signal generator configuration, channel selection, and data offload functionality.
Part Number: ASY00056-02
Height: 4U, 7 inches
Width: 19 inches
Depth: 29 inches
Weight: 85 lbs
Processor: Dual Dodeca-core Intel Xeon E5-2680-v3 CPUs
Input Channels: 4
Input Frequency: 10 MHz – 6 GHz
Input Bandwidth: 2x @ 160 MHz BW or 4x at 50 MHz BW
Output Channels: 2 (Each channel has 2x connections)
Output Frequency: 10 MHz – 6 GHz
Output Bandwidth: 2x @ up to 160 MHz BW
Storage: 1x 256 GB SSD (OS)
2x Quad Drive Packs (Not populated w/ disks)
Tape Drive: External LTO-6
Memory: 128 GB DDR4, 2133 MHz
Connections: 2x RF Outputs (N/F)
4x USB 2.0 (Type A)
4x SAS (SAS External)
2x Gigabit Ethernet (RJ-45)
1x DVI Output (DVI)
2x Power (C13)
Line Voltage: 100 – 240 VAC
Frequency: 47 – 63 Hz
Maximum Continuous Power: 800 Watts
Operating Temperature: 10-deg C to 35-deg C
(50-deg F to 95-deg F)
Storage Temperature: -40-deg C to 70-deg C
(-40-deg F to 158-deg F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Basic Unit Price: $97,000
35
All trademarks and registered marks are the property of their respective owners.
CACI National and Cyber Solutions
Antennas
RF Front End Family
BIT Systems designs and manufactures a wide variety of high performance antenna systems
and antenna feeds. These systems are in use by a variety of DoD and Civilian agencies. All BIT
Systems hardware solutions are modular and scalable and can be specifically configured to
meet
customer requirements.
2016 Hardware Catalog
High-Gain Antenna
AS1.8R0.8-6.0 is an ultra wideband antenna system consisting of a 1.8 meter reflector mounted on a high-performance 2-axis positioner.
This system is optimized for reception of linearly polarized signals in the frequency range of 800 MHz – 6 GHz. The RF path is internally
routed through a low-loss rotary joint, enabling the positioner to support continuous azimuth motion. This system includes antenna,
positioner and tripod. RF conditioning components, low noise amplifiers, and other accessories are also available. An integrated Ku-band
down converter option is available at an additional cost.
This system is not rated for outdoor use in the current configuration.
Part Number: AS1.8R0.8-6.0
Reflector Diameter: 1.8 meter
Frequency Range: 800 MHz – 6 GHz
Feed Polarization:Vertical
RF Connections: N-type female connector
Aperture Gain: 17.5 – 34.5 dBi (0.8 – 6 GHz)
Positioner Remote Control: RS-422
Angular Travel: Continuous in azimuth, -5° to 90° in elevation
Max Positioner Angular Velocity: 30° per second
Pointing Accuracy: 0.1°
Basic Unit Price: $187,000
37
All trademarks and registered marks are the property of their respective owners.
2016 Hardware Catalog
High-Gain Antenna
AS1.2R0.8-6.0 is an extremely wideband antenna system consisting of a 1.2 meter reflector mounted on a high-performance 2-axis
positioner. This system is optimized for reception of linearly polarized signals in the frequency range of 800 MHz – 6 GHz. The RF path
is internally routed through a low-loss rotary joint, enabling the positioner to support continuous azimuth motion. This system includes
antenna, positioner and tripod. RF conditioning components, low noise amplifiers, and other accessories are also available.
Part Number: AS1.2R0.8-6.0
Reflector Diameter: 1.2 meter
Reflector Frequency Range: 800 MHz – 6 GHz
Feed Polarization: Vertical
RF Connections: N-type female connector
Aperture Gain: 18.1 – 28.1 dBi (0.8 - 6 GHz)
Positioner Remote Control: RS-422
Angular Travel: Continuous in azimuth, -5° to 90° in elevation
Max Positioner Angular Velocity: 30° per second
Pointing Accuracy: 0.1°
Basic Unit Price: $179,000
38
Visit us online for more information about our SIGINT Solutions:
www.caci.com
All trademarks and registered marks are the property of their respective owners.
2016 Hardware Catalog
High-Gain Antenna with Transmit
AS1.2R0.8-6.0BR is a dual-band antenna system consisting of a 1.2 meter segmented reflector and a side mounted Log-Periodic Array (LPA)
both mounted on a high-performance 2-axis positioner. The main reflector is designed to receive linearly polarized signals in the frequency
range of 800 MHz – 6 GHz. The side mounted LPA can serve as a secondary reception antenna or transmit antenna for signals with
frequency ranges from 290 MHz – 2.0 GHz. For transmission applications the antenna can handle output powers up to 1000 Watts.
The RF path for both antennas is internally routed through a low-loss rotary joint, enabling the positioner to support continuous azimuth
motion. This system includes antenna, positioner and tripod. RF conditioning components, low noise amplifiers, and other accessories are
also available.
Part Number: AS1.2R0.8-6.0BR
Reflector Diameter: 1.2 meter
Reflector Frequency Range: 800 MHz – 6 GHz
Main Feed Polarization: Vertical
Main Aperture Gain: 18 – 28.1 dBi (0.8 – 6 GHz)
Secondary LPA Frequency Range: 290 MHz – 2.0 GHz
Secondary LPA Polarization: Vertical
RF Connections: 2x N-type female connectors
Positioner Remote Control: RS-422
Angular Travel: Continuous in azimuth,
-5° to 90° in elevation
Max Positioner Angular Velocity 30° per second
Pointing Accuracy: 0.1°
Basic Unit Price: $186,000
39
All trademarks and registered marks are the property of their respective owners.
2016 Hardware Catalog
Azimuth-Only / Offset Feed Reflector (OFR)
The Offset Feed Reflector (OFR) is capable of collecting signals from 800 MHz – 6 GHz with outstanding gain performance. The antenna
features a high-performance azimuth positioner for fast, precise and accurate target tracking. The RF path is internally routed through
a low-loss rotary joint, enabling the positioner to support continuous azimuth motion. It features a compact parabolic reflector and is
designed to be operated inside a radome. This system includes antenna, positioner and tripod.
Part Number: AS0.3R0.8-6.0
Reflector Diameter: 1.0 meter
Frequency Range:800 MHz – 6 GHz
Feed Polarization:Vertical
RF Connections: N-type female connector
Aperture Gain: 10.5 – 29.5 dBi (0.8 – 6 GHz)
Positioner Remote Control: RS-422
Angular Travel: Continuous/Azimuth only
Max Positioner Angular Velocity: 30° per second
Pointing Accuracy: 0.1°
Basic Unit Price: $97,000
40
Visit us online for more information about our SIGINT Solutions:
www.caci.com
All trademarks and registered marks are the property of their respective owners.
2016 Hardware Catalog
UHF Tightly-Coupled Array (TCA)
The UHF TCA is a compact wideband directional antenna system.
The system is optimized for the reception of linearly polarized
signals in the frequency range of 200 MHz – 600 MHz. The
antenna array is 24” x 48” and maintains a system gain of 24 dB.
The RF path is internally routed through a low-loss rotary joint
enabling the positioner to support continuous azimuth motion.
The antenna has integrated low-noise amplifiers at each element
to maximize sensitivity.
Part Number: TCA 0.2-0.6
Aperture Size: 24” W x 48” H
Frequency Range: 200 MHz – 600 MHz
Antenna Polarization: Vertical
RF Connections: N-type female connector
System Gain: 24 dB
Positioner Remote Control: RS-485, 4-wire
Angular Travel: Continuous / Azimuth Only
Max Positioner Angular Velocity: 10° per second
Pointing Accuracy: 1.0°
Basic Unit Price: $36,000
41
All trademarks and registered marks are the property of their respective owners.
2016 Hardware Catalog
Dual-Polarization UHF Tightly-Coupled Array (TCA)
The Dual-Polarization UHF TCA (DPTCA) is a compact wideband directional antenna system. The system is capable of receiving both linear
and circular polarized signals in the frequency range of 200 MHz – 600 MHz. The antenna array is 48” x 48.” The DPTCA outputs vertically
and horizontally polarized signals for processing at the receiver system. The RF path is internally routed through a low-loss rotary joint
enabling the positioner to support continuous azimuth motion. The antenna has integrated low-noise amplifiers at each element to
maximize sensitivity. This configuration includes antenna, positioner, riser and tripod.
This system is not rated for outdoor use in the current configuration.
Part Number: TCADP 0.2-0.6
Aperture Size: 48”H x 48”W
Frequency Range: 200 MHz – 600 MHz
Antenna Polarization: Separate Vertical and Horizontal Outputs
RF Connections: 2x N-type female connector
System Gain: 28.5 – 31.1 dB
Positioner Remote Control: RS-422
Angular Travel: Continuous in azimuth, -5° to 90° in elevation
Maximum Positioner Angular Velocity: 30° per second
Pointing Accuracy: 0.1°
Basic Unit Price: $206,000
42
Visit us online for more information about our SIGINT Solutions:
www.caci.com
All trademarks and registered marks are the property of their respective owners.
2016 Hardware Catalog
4X8 RF Switch Matrix
The 4x8 RF Switch Matrix is our latest generation non-blocking RF switch matrix designed to work with BIT Systems' RF conditioning units.
The switch supports up to 8 input ports and 4 output ports. Each output port can be connected to any one of the input ports. The switch
is designed to work in conjunction with BITS’ second generation RFCUs to provide low-noise amplification and gain between the antenna
and the processor, as well as advanced Built-In-Test and remote calibration capabilities. The switch can support signals up to 6 GHz and is
mountable in any standard 19” rack and occupies 2U of height. The switch matrix is remote controlled through an RS-485, 2-wire.
Part Number: ASY00042-01
Input Ports: 8 (N/F)
Output Ports: 4 (SMA/F)
Switch Remote Control: 50 MHz – 6 GHz
Frequency Band: 50 MHz – 6 GHz
Isolation: 50 dB minimum
Insertion Loss: 0 dB
Height: 2U, 3.5 inches
Depth: 21 inches
Power: 100 – 240 VAC @ 47 – 63 Hz
Maximum Continuous Power: 50 Watts
Control: RS-485, 2-wire
Basic Unit Price: $48,000
43
All trademarks and registered marks are the property of their respective owners.
2016 Hardware Catalog
Second Generation RF Conditioning Unit and RFCU Power Control Unit
BIT Systems' latest RF Conditioning Units (RFCU) employ advanced rugged designs aimed at optimizing antenna performance across wide
frequency ranges. These systems are optimized for installation at locations where remote diagnostic capabilities are required. Our RFCUs
are designed for use in conjunction with BITS' RF switch matrix and are designed to eliminate line loss due to long cable runs between
the antenna and processor for signals up to 6 GHz. They incorporate embedded test capability to remotely monitor system performance.
Tailored with hardware filters to perform specific RF environment shaping, they optimize the collected RF bandwidth. BITS' RFCUs are
designed to work with our 4x8 RF Switch Matrix and require a BITS RFCU-PCU power control unit.
RFCU-LSC
Part Number: ASY00036-01
Frequency Band: 800 MHz – 1.81 GHz
2 GHz – 3.6 GHz
3.9 GHz – 6 GHz
Number of RF Inputs: 1 (N/F)
Number of RF Outputs: 1 (N/F)
Enclosure: NEMA 4 type
Connectors:
RF: N-type
Power and Control: MIL Circular; 28 VDC; RS-485, 2-wire
Basic Unit Price: $21,000
RFCU-Uv2
Part Number: ASY00037-01
Frequency Band: 200 – 500 MHz
Number of RF Inputs: 4 (N/F)
Number of RF Outputs: 1 (N/F)
Enclosure: NEMA 4 type
Connectors:
RF: N-type
Power and Control: MIL Circular; 28 VDC; RS-485, 2-wire
Basic Unit Price: $18,000
RFCU-PCU
Part Number: ASY00052-02
Number of 220 VAC Power Inputs: 1 (MIL Circular)
Number of RS-485 Control Inputs: 1 (MIL Circular)
Number of 220 VAC Power Outputs: 2 (MIL Circular)
Number of 28 VDC / RS-485 Power / Control Outputs: 3 (MIL Circular)
Enclosure: NEMA 4 type
Connectors: 7 (MIL Circular)
Basic Unit Price: $17,000
44
Visit us online for more information about our SIGINT Solutions:
www.caci.com
All trademarks and registered marks are the property of their respective owners.
2016 Hardware Catalog
Prototypes
The Sparrowhawk System provides SIGINT detection capabilities to an airborne platform. This system has been developed as a host for
X-Midas and other software-defined radio applications running on the Linux operating system. This prototype is equipped with a single
channel 30 MHz – 6 GHz digital tuner with an instantaneous bandwidth of 30 MHz. Additionally, it is equipped with a high quality signal
transmitter that can generate a software defined waveform up to 50 MHz bandwidth. The processor includes an integrated GPS receiver
capable of providing precision timing and 1 Pulse Per Second inputs to the tuner and transmit unit. The Sparrowhawk system is headless
and relies on either Ethernet or serial communications for remote control and data/intercept offload. The power system is specifically
designed for 28V DC nominal power.
Part Number: ASY00197-01
Height: 5 inches
Width: 10 inches
Depth: 18.5 inches
Weight: 17 lbs
Processor: Intel Core i7-4790S Haswell Quad-Core 3.2 GHz
Receivers: 1x Single-channel
30 MHz – 6 GHz
30 MHz Max. Bandwidth
Digital Output
Input Channels: 1
Output Channels: 1
Output Bandwidth: 50 MHz
Output Frequency: 30 MHz – 6 GHz
Storage: 1x 256 GB Industrial SSD (OS) w/Hardware Read-Only
Memory: 16 GB DDR3, 1600 MHz
Connections: 1x RF Input (SMA/F)
1x RF Output (SMA/F)
1x GPS Antenna Connection (SMA/F)
4x USB (Type A)
2x Gigabit Ethernet (RJ-45)
1x HDMI Output
1x RS232/485
1x Power
Line Voltage: 24 – 36VDC
Maximum Power Consumption: 225Watts
Operating Temperature: -17-deg C to 29-deg C
(0-deg F to 85-deg F)
Storage Temperature: -40-deg C to 70-deg C
(-40-deg F to 158-deg F)
Operating Relative Humidity: 8% to 90% (non-condensing)
45
All trademarks and registered marks are the property of their respective owners.
2016 Hardware Catalog
Prototypes
The Thrasher System provides SIGINT detection capabilities to an airborne platform. This system has been developed as a host for
X-Midas and other software-defined radio applications running on the Linux operating system. This prototype is equipped with a single
channel 70 MHz – 6 GHz digital transceiver with transmit and receive bandwidths of 25 MHz. The processor includes an integrated
GPS receiver capable of providing precision timing and 1 Pulse Per Second inputs to the tuner and transmit unit. The Thrasher system
is headless and relies on either Ethernet or serial communications for remote control and data/intercept offload. The power system is
specifically designed for 28 VDC nominal power.
Part Number: ASY00196-01
Height: 3.85 inches
Width: 7 inches
Depth: 11 inches
Weight: 5.5 lbs
Processor: Intel Core i7-4790S Haswell Quad-Core 3.2GHz
Receivers: 1x Single-channel
70 MHz – 6 GHz
25 Hz Max. Bandwidth
Digital Output
Input Channels: 1
Output Channels: 1
Output Bandwidth: 25 MHz
Output Frequency: 70 MHz – 6 GHz
Storage: 1x 256 GB Industrial SSD (OS) w/Hardware Read-Only
Memory: 16 GB DDR3, 1600 MHz
Connections: 1x RF Input (SMA/F)
1x RF Output (SMA/F)
1x GPS Antenna Connection (SMA/F)
1x Gigabit Ethernet (RJ-45)
1x RS232/485
1x Power
Line Voltage: 24 – 36 VDC
Maximum Power Consumption: 120Watts
Operating Temperature: -17-deg C to 24-deg C
(0-deg F to 75-deg F)
Storage Temperature: -40-deg C to 70-deg C
(-40-deg F to 158-deg F)
Operating Relative Humidity: 8% to 90% (non-condensing)
46
Visit us online for more information about our SIGINT Solutions:
www.caci.com
All trademarks and registered marks are the property of their respective owners.
2016 Hardware Catalog
Prototypes
The Electronically Steered Array (ESA) is a compact wide-band antenna system capable of 120 degree beam steering in the azimuth
plane. The system is optimized for reception of linearly polarized signals in the frequency range of 800 MHz – 3 GHz. The ESA utilizes
solid state technology for operation in harsh environments. The antenna system is designed to operate in limited SWaP environments
and
measures 26" W x 9" H x 5" D.
Part Number: ASY00132-01
Aperture Size: 24” W x 8” H
Frequency Range: 3.0 MHz to 3 GHz
Feed Polarization: Vertical
RF Connections: SMA Female
System Gain: 24 dB @ 2200 MHz (Broadside Steering Angle)
Positioner Remote Control: Ethernet TCP/IP, RS-485 or RS-232
Beam Steering Control: 120° Azimuth; Fixed Elevation
Beam Steering Speed: < 10ms
Weight: 22 lbs
47
All trademarks and registered marks are the property of their respective owners.
Download PDF