Indoor Mesh Router with Predictive Routing Protocol | ABB Wireless

TropOS 3320/3310
Indoor Mesh Router
−− Multi-Antenna System: 1-TX x 3-RX
−− Three 3 dBi omnidirectional antennas
−− Support for 802.11n MRC
−− IEEE 802.11a radio
−− Modulation: 802.11a/n - OFDM (64-QAM, 16-QAM,
QPSK, BPSK)
−−TX power (dBm EIRP)
setable in 1dB increments
Band (MHz)
FCC
ETSI
5725-5850
15-30
11-26
−− RX Sensitivity:
-94 dBm @ 6 Mbps
-76 dBm @ 54 Mbps
−− Media Access Protocol: CSMA/CA with ACK
−− 3 dBi omnidirectional antenna
Interfaces
−− Full 802.11b/g, 802.11a, 802.11n client compatibility
−− IEEE 802.3u autosensing 10/100BASE-T Ethernet ports
−− IPv4; IPv6-ready
−− BGP
−− 802.1q VLAN support (ESSID and IP based tagging)
−− Support for static and dynamic addressing for wireless and
wired clients
−− Session-persistent mobility across subnets
−− IP multicast forwarding, IGMPv3; IGMP Proxy
−− Automatic rate, power, channel and band control
−− Reliable broadcast
The TropOS 3320 indoor mesh router provides a turnkey
solution for extending TropOS outdoor mesh networks into
indoor environments. Ideal for extending municipal, utility,
enterprise, industrial, or military outdoor mesh networks into
indoor offices or other facilities, the unit features a next-generation high-sensitivity radio design for superior stability and
throughput.
Wireless
−− IEEE 802.11b/g/n radio
−− Modulation: 802.11g/n - OFDM (64-QAM, 16-QAM, QPSK,
BPSK); 802.11b - DSSS (DBPSK, DQPSK, CCK)
−− Media Access Protocol: CSMA/CA with ACK
−−TX power (dBm EIRP)
setable in 1dB increments
Band (MHz)
FCC
2400 - 2473
18-33
NA
2400 - 2483
NA
3-18
−− RX Sensitivity:
-97 dBm @ 1 Mbps
-96 dBm @ 6 Mbps
-84 dBm @ 54 Mbps
ETSI
Quality of Service
−− 802.11e WMM
−− 802.1p/q with 4 queues per VLAN and ESSID
−− 802.1p and DSCP
Management
−− Local and remote management tools via HTTPS
−− Identity-based authentication (4 levels)
−− Configuration save and restore
−− Over the air software upgrades with rollback
−− SNMP (standard MIBs)
−− Wireless, network and client monitoring and statistics
−− Wireless rescue
−− Dual image
−− Auto recovery
Safety Approvals
−− EN 60950
−− IEC 950
−− UL 60950-1
−− CSA 22.2 No. 60950-1
−− UL 1449/IEC 60664-1
−− CE
Environmental Specifications
−− Operating temperature range: -40°C to 55°C
−− Storage temperature range: -40°C to 85°C
−− Weather rating: IP11
−− Shock & vibration: ETSI 300-19-2-4 spec T41.E class 4M3
−− Transportation: ISTA 2A
Warranty
−− One (1) year on parts and labor; return to point of purchase
−− Software and hardware maintenance plans available
Protection
−− Antenna protection Integrated
−− Electrical Protection:
−− EN61000-4-4 Level 2 Electrical Fast Transient Burst Immunity
−− EN61000-4-3 Level 2 EMC Field Immunity
−− EN61000-4-2 Level 2 (contact), Level 3 (air) ESD immunity
Power
−− Power input: PoE (11-55 VDC); 100-277 VAC with external
accessory
−− Power consumption: 10 W typical
−− Power-on and network status LEDs
Physical
−− Dimensions (w/o antennas): 8.5” (21.6 cm) wide x 7” (17.8 cm)
deep x 3” (7.6 cm); with antennas 14” (35.6 cm)
−− Weight: 2.2 lbs (1 kg) max
Wireless Approvals
−− FCC CFR 47 Part 15, Class B Subpart C
−− Industry Canada RSS 210
−− EN 301 489-17
−− EN 300 328
−− EN 301 893
For more information please contact:
ABB Wireless
3055 Orchard Drive
San Jose, CA 95134
Phone: 408-331-6800
E-Mail: wireless.sales.nam.abb.com
www.abb.com/unwired
1KHA - 001 286 - SEN - 1007- 07.2016 © Copyright 2016 ABB. All rights reserved.
Security
−− IPsec VPNs with tunnels to wired client interfaces using AES
−− Authentication: WPA, WPA2, 802.11i, RADIUS, 802.1x
(includes EAP-TLS, EAP-TTLS, EAP-SIM, PEAP)
−− Encryption: open, WEP, TKIP, AES-CCM
−− AES encryption of mesh and control traffic
−− Technical controls to achieve NERC CIP v5 compliance
−− Multiple BSSIDs & ESSIDs (ESSID suppression)
−− Integrated firewall
−−Packet filtering based on TCP/UDP port, protocol, SA, DA
−−Peer-to-peer blocking
−−Client access control lists
−− Evil twin detection and reporting
−− Denial of service (DoS) attack detection and reporting
Download PDF

advertising