ML684D Ethernet Access Device
The ML684D Industrial Ethernet Access Device
(EAD) from Actelis® is a small form factor Add-Drop
EAD that enables delivery of symmetrical highspeed Ethernet services over existing copper and
fiber infrastructure. Up to 60 Mbps of symmetrical
Ethernet traffic over copper and 1Gbps over fiber.
Designed for Industrial, utility and traffic applications, The
ML684D takes in two fiber ports or four copper pairs and allows
them to be split into two directions, east and west, thereby
allowing multiple nodes to be connected over copper or fiber in
a linear chain or ring configuration. Each node has full switching
capabilities and can drop and add Ethernet traffic at each
location while transferring the rest of the traffic through. The
ML684D offers extremely small factor and DIN rail mounting for
flexible deployment within utilities, traffic and industrial cabinets.
With its superior performance, extensive functionality, high
robustness and reliability, the ML684D EAD offers rapid service
delivery and allows for complete utilization of the existing network
infrastructure.
Interoperable with any standard Ethernet switch, router or hub
and compliant with Metro Ethernet Forum (MEF) specifications,
ML684D EAD systems seamlessly integrate into carrier Ethernet
networks. Equipped with six 10/100Base-T Ethernet interfaces
and two 100/1000Base-FX Small Form Factor (SFP) port, the
ML684D EAD allows assignment of a service or a customer per
port.
The ML684D is a hardened EAD designed for flexible
deployment in harsh environments. It complies with NEMA 4
extended temperature requirements and K.21/K.45 for extended
protection against overvoltages and over-currents.
Powered by Actelis Networks’ award-winning, patented
EFMplus™ technology, the rate, reach and reliability are
increased significantly using advanced Dynamic Spectrum
Management (DSM) techniques. This technology provides
the best rate/reach performance, most resilient fiber-quality
transmission while ensuring high reliability.
The ML684D EAD provides 802.1q VLAN-aware wirespeed bridging, double tagging (VLAN stacking) for end-user
VLAN transparency, L2 (Ethernet priority), L3 (ToS/DiffServ) classification with four traffic classes, RSTP/STP, Link
Aggregation, band-width monitoring, Multicast/Broadcast
limiting, as well as IGMP bandwidth snooping for video
distribution applications.
The ML684D EAD provides proactive and dynamic tools
for enhanced trouble shooting and monitoring capabilities.
Advanced Carrier-class EFM OAM, including 802.3ah, CFM
(802.1ag) and Y.1731 (ITU),
are incorporated, offering
both physical link as well
as service level end-to-end
advanced troubleshooting
mechanisms.
The MetaASSIST™ View
graphical craft application
and the MetaASSIST EMS
multi-platform Element
Management System
offer in- and out-of-band
management of the
ML684D. Management
protocols include standard
TL1 command line
interface and SNMP using
standard MIBs for seamless
integration with third-party
Network Management
Systems (NMS).
Highlights
Applications
•
•
•
•
•Telemetry
• IP-based Traffic Controllers
• Smart Grid Sensors
• Dynamic Message Signs
• HD Video Cameras & Streaming
• Vehicle Detection
• Smart Parking
• Emergency Response
• Supports & Complements City Wi-Fi Access
•
•
•
•
•
•
•
Support for two High Speed Copper Links
Small form factor, no fan, DIN railing
Environmentally hardened
IEEE 802.3ah Ethernet in the First Mile (EFM)
2Base-TL Solution
CE 1.0
Rapid Service Deployment
Superior Rate, Reach & Reliability
Low Delay and Jitter for Voice and Video Transmission
Carrier-Class OAM
Worldwide Spectral Compliancy
FCC, UL, CE, NEMA 4
High Performance Broadband Over Copper
SUA Telenet GmbH • CH-8201 Schaffhausen • Tel: 052 647 4141 • Fax: 052 647 4140
ML684D
Specifications
Interfaces
Ethernet (Network/User) - 8 port switch
•10/100Base-T: 6 ports,
Connector: RJ45, Auto-MDIX
•100/1000Base-FX: 2 ports
Connector: SFP Based, MSA compliant
High Speed Link (HSL) - Bonded copper pairs
•Protocol: IEEE 802.3ah 2Base-TL
• Line code: ITU-T G.991.2 rev. 2
• Number of copper pairs: 4, Connector: RJ45 x 2
• Number of HSLs: One 1 HSL- up to 4 pairs,
2 HSLs- east/west, 2 pair each
• Bandwidth per HSL: 1 HSL - up to 60 Mbps;
2 HSLs up to 30Mbps
• End-to-end Delay: 2-4 ms (typical)
• Spectral Compliance: ITU-T G.991.2 annex A, B, F,
G, ETSI TS 101 524 annex E, ANSI T1.417, T1.426,
Per-country regulatory compliant spectral modes
• Sealing Current: 48 VDC/1.5mA nominal (sink)
Serial interface*
• RS-232/RS-485 terminal server Connector: RJ45
Management (Out-of-Band)
• 10/100Base-T Connector: RJ45, Auto-MDIX
• Craft: EIA RS-232 (DCE) Connector: RJ45
Alarm Contacts
• Terminal Block, 2 Input, 1 Output
LAN Protocols
• Dynamic Bridging: IEEE 802.1, 8K MAC addresses
• Discovery Mechanisms: LLDP
• VLAN Tagging: IEEE 802.1Q
• Double Tagging: Q-in-Q
• RSTP, STP: IEEE 802.1d
• Link Aggregation: IEEE 802.3ad
• Provider Bridges: IEEE 802.1ad
• IGMP snooping: IGMP V1/V2
•OAM: IEEE 802.3ah clause 57
(EFM OAM), IEEE 802.1ag, ITU Y.1731,
Ethernet loopback with MAC swap
Advanced Service Provisioning and
Traffic Management
Quality of Service
• Classes of Service: 4
•Scheduler: WFQ, SP
•Classification: L2 802.1p/Q priorities,
L3 ToS/Diff Serv
Management
Management Applications
• EMS: MetaASSIST EMS
• Craft GUI: MetaASSIST View
Environmental
Protocols
•SNMP: SNMP V3, V2C, V1
• IP addresses: IPV4 and IPV6
• Command Line Interface: TL1, CLI
• Remote Access: Telnet
• Secure Access (option): SSH v2
• Time Synchronization: SNTP v3
• Web Access: HTTP
• File transfer: FTP, TFTP
• IEEE 802.3ah EFM OAM: Dying Gasp
• User Authentication: RADIUS and/or
local passwords
Front Panel Indicators (LEDs)
•Power
•Status
•Alarm
• MLP per modem/pair
• ACT (Activity) per Ethernet port
• LNK (Link) per Ethernet/HSL port
• Operating Temp. -40° to +74°C
• Storage Temp. -40° to +85°C
• Relative humidity: Up to 95%, non condensing
Regulatory Approval/Certifications
Metro Ethernet Forum
• CE 1.0 - MEF 9, 14
Safety
• UL 60950, CSA C22.2 60950
• EN 60950, IEC 60950
EMC
• FCC Part 15 Class A
• ICES-003 Class A
• ETSI EN 300 386 Class A
• ETSI ETS 300 132-2
• ITU-T K.21, K.45
CE
• EMC and Safety
Environmental
•ETSI ETS 300 019
• NEMA 4 Thermal
Physical
• Dimensions: Height: 5.95” / 151 mm,
Depth: 5.1” / 130 mm, Width: 2.3” / 58 mm
• Weight: 1.76 lbs / 0.8 kg
• Mounting: Din Rails, Wall Mount
• PowerDC: -24/-48 VDC nominal, 9 Watt
AC: 90-264 VAC
* Future Support, Utilizing same port as craft interface
Company and General Information: info@actelis.com
Corporate Headquarters
Actelis Networks, Inc.
47800 Westinghouse Drive
Fremont, CA 94539
t. +1 510-545-1045 or toll-free in U.S. 1-866-ACTELIS
Asia Pacific Sales: apacsales@actelis.com
Central and Latin America Sales: calasales@actelis.com
Europe, Middle East and Africa Sales: emeasales@actelis.com
North America Sales: nasales@actelis.com
Actelis Networks® is the leading global supplier of Carrier Ethernet over Copper broadband solutions for telecom service providers, enterprises and municipalities. Deployed by more than
350 customers worldwide, Actelis is accelerating broadband services to businesses and residential subscribers through award-winning products and technologies. All content included in this
document is the exclusive property of Actelis Networks, Inc., and protected by U.S. and international copyright laws. Specifications are subject to change without notice. Actelis® and Actelis
Networks® are registered trademarks. EFMplus™ and MetaASSIST™ are trademarks of Actelis. Any other trademarks used herein are the property of their respective owners. Copyright ©2014.
All Rights Reserved. Learn more at www.Actelis.com.
0714
SUA Telenet GmbH • CH-8201 Schaffhausen • Tel: 052 647 4141 • Fax: 052 647 4140
Download PDF