Keysight SAS (Serial Attached SCSI) and SATA (Serial ATA

Keysight
SAS (Serial Attached SCSI) and
SATA (Serial ATA) Protocol Analyzers
Data Sheet
U3055A/U3056A Pro II 12G SAS analyzer
U3052C/U3057C Pro SAS/SATA analyzer
U3051C SAS/SATA analyzer
U3053C SAS/SATA jammer
02 | Keysight | SAS (Serial Attached SCSI) and SATA (Serial ATA) Protocol Analyzers - Data Sheet
For today’s SAS and SATA developers and integrators, getting to the root of a
problem can be especially difficult when there isn’t an obvious trigger condition.
Troubleshooting is further complicated by increasing storage capacities, data
rates, and protocol complexity. Integrators and developers need faster and deeper analyzers to keep up. Traditionally, those needing to capture large amounts
of traffic have been faced with limited trace buffers, long waits to view the data,
slow searches, and slow saving. SerialTek has overcome the old limitations
with the BusXpert Series of SAS/SATA Analyzers. The BusXpert uses advanced
technologies such as the industry’s first PCI Express x4 uplink to the host (550
MB/s), up to 72 GB of buffer (Pro II), Hardware Accelerated Gigabit Ethernet,
pre-indexed and compressed trace data, multiple analysis processors, and
instant display of the captured data.
The BusXpert also features easy to use triggering, pre/post-filtering, textual
search and sequence search, and many different displays of the captured traffic.
It is available in a variety of configurations to fit specific needs for buffer size,
port-count, protocols, and budget. The BusXpert breaks free of past analyzer
limitations and lets users spend more time on development and debug efforts.
Hardware Innovations
The BusXpert also features a Native PHY, fast data Re-Lock, 2-ns timestamp
resolution, Eye-opener front-end, and tunable RX/TX signaling. The Native PHY,
along with SerialTek's proprietary re-lock implementation, allows the BusXpert
to achieve the industry's fastest PLL lock-time, resulting in extremely accurate
capture during speed negotiation, power management, and SSC transmissions.
A 2-ns timestamp resolution allows for extra detailed timing information. This is
especially useful with SAS wide links and is also helpful in determining if timing
violations occurred during capture. This 2-ns timestamp resolution is three times
more accurate than found in other competing solutions. The tunable RX/TX and
eye-opener front-end allow the BusXpert's signal characteristics to be adjusted
on the fly.
Pre-indexing enables fast displaying of, searching for, and hiding of the captured
bus activity. Trace-processing works with pre-indexing to allow for quicker
display of transactions, decreasing the time needed for searching and allowing
saved traces to perform just as fast as traces stored on the BusXpert. Trace
formatting enables efficient use of the host system’s disk space, allowing
more traces to be saved without the extra data found in other trace formats.
Compression is used to cut down on the space needed for repetitive SAS and
SATA link layer traffic and also to utilize the pipe connection to the host system
more effectively.
BusXpert's hardware was designed to deliver trace data at speeds of up to
550 MB/s, capturing up to 72 GB of bus activity and ensuring the data captured
is represented as accurately as it appears on the bus. To take advantage of the
performance offered by the hardware, BusXpert's software was designed from
the ground up to fully utilize the fast pipes and large buffers. Existing methods
of dealing with the upload and display of trace data were not efficient enough
and led to some key innovations found only in the BusXpert software: Preindexing, trace-processing, trace-formatting, and compression.
The BusXpert PRO is the only SAS analyzer and SATA analyzer to offer hardware accelerated gigabit ethernet and PCI Express x4 for the host interface. This
enables fast uploads of even the largest capture files—it can be configured for
up to 72 GB of data capture.
03 | Keysight | SAS (Serial Attached SCSI) and SATA (Serial ATA) Protocol Analyzers - Data Sheet
Inventive Software
BusXpert has a new and revolutionary Java-based, portable user interface with
multiple docking views and easy-to-use portable API for automation. InstaView and
PreIndexing innovations allow viewing of any size trace and lets designers truly use
the analyzer in under five seconds!
Outstanding features that make SAS/SATA analysis a snap include
– M
ultiple capture recording:
Allows the analyzer to re-arm itself after a trigger condition has been met and start
a new recording for up to 256 consecutive segments.
– A
TAPI support:
Software fully decodes ATAPI commands.
– L ive counters and monitors:
Allow the user to independently count user-specified events, such as frame errors,
and take a trace simultaneously.
– InstaSearch technology:
Uses the latest in MicroBlaze microprocessor technology to search through large
trace buffers in seconds.
– S
trong compression:
Allows the user to maximize buffer space by compressing primitives even when an
ALIGN or IDLE are between each occurrence.
– T riggering improvements:
Users can now specify more than one trigger action in each "Wait for" state.
– A
dditional command decoding:
Deeper decodes of popular commands such as Identify Device and Inquiry.
– O
verlapped command display:
In response to customer enhancement requests, users can now monitor the number of commands and responses while a single command is outstanding.
– L ive performance monitoring:
Measure IOPS per second, Read/Write/Total MB/s per each link for comparison.
04 | Keysight | SAS (Serial Attached SCSI) and SATA (Serial ATA) Protocol Analyzers - Data Sheet
Inventive Software (continued)
Triggering
BusXpert's triggering interface allows for quick definition of events with frame
layouts matching the SAS2 and SATA specifications. Simple and complex
triggers can be built with ease. BusXpert's triggering includes:
– Up to 8 sequencers
– Up to 16 states per sequencer
– Up to 32 counters and timers
– Multi-level branching
– User-defined events
– External trigger in/out
Also featured is the ability to copy and paste frames and primitives from an
open trace, saving additional time on defining events. Any of the events created
can be saved to the User Events folder for future use.
Pre-filtering
Filtering out specific primitives, frames, data, and addresses is easy. Simply
specify which patterns to filter out during a capture to maximize buffer space,
resulting in more meaningful data.
Line status
The Status menu shows a visual representation of what is currently occurring
on the bus and also a status of the capture.
The MUX/Spd/OOB/Link/Frame/10b Err/Cmd/ and Err Sts LEDs match the
activity on the front of the BusXpert. Status lights such as Frame, Cmd, Link,
and OOB are useful in determining what is happening on the bus at any given
time, while the error lights, such as 10b Err and Err Sts, let the user know that
signal errors and command errors are occurring.
05 | Keysight | SAS (Serial Attached SCSI) and SATA (Serial ATA) Protocol Analyzers - Data Sheet
Inventive Software (continued)
Protocol view
Shows the precise timing relationship of each DWORD in the trace. This is
useful for tracking the handshaking between products under test.
Frame details
Shows each frame in the format used by the SAS or SATA specification. This is
useful for checking frame contents and correlating against expected values.
Transaction view
Shows each command in the order it was initiated. Commands may be expanded
to show the frames associated with them or collapsed so that only a summary
of the command is shown.
Data view
Shows the payload of a selected SAS or SATA Data Frame in several
different formats.
Spreadsheet view
Provides extensive decoding of the frames, primitives, and Out-of-Band (OOB)
events and sorts them to show the order in which they occurred. The displayed
columns are chosen from an extensive list of fields and events.
06 | Keysight | SAS (Serial Attached SCSI) and SATA (Serial ATA) Protocol Analyzers - Data Sheet
Inventive Software (continued)
Searching for data
Easily search for specific frames, primitives, addresses or other events with the
Quick Search and Advanced Search functions. Quick Search is a text search
that fills in the rest of the search term as the user starts typing. Advanced
Search provides a way to search for sequences of events, either within a frame,
or across multiple frames or events. It is identical to the Trigger Sequencer in
appearance.
The ‘Protocol view,’ ‘Transaction View,’ and ‘Spreadsheet view’ show different
levels of the same data and can be synchronized by double-clicking in any of
the views. All of the views can be easily configured to display anywhere in
the workspace. Hide, dock, pin, and resize to the desired configuration and
the software will retain the last known settings. Each view can be exported to
CSV and XML formats, and the Frame ‘Details’ view will also export to HTML.
All command decodes are XML-based and can easily be edited or created for
unique or vendor-specific commands.
The intuitive interface used for Triggering is also used with the Searching and
Filtering functions allow for simplicity and ease of use. Any created and saved
events are available to use in each of the interfaces.
BusXpert’s software is up-to-date with the latest specifications for SAS2 and
SATA Revision 3.0. It is also constantly updated with new features driven by
market demands and customer requests.
07 | Keysight | SAS (Serial Attached SCSI) and SATA (Serial ATA) Protocol Analyzers - Data Sheet
Statistical Analysis: Get an Overall View of the Types of Traffic Captured
– N
avigate into areas of interest
– Look for max/min performance areas
There are several reports that are generated by the statistics view and many
of them can be used to find interesting areas in the trace. For example, with
the graphic above, click on the 'Max Response Time' number in blue to jump
to that command in the trace, and then set a bookmark to identify it for future
use. Click on the arrow button next to the result for a drop-down of the 15 max/
min values. Then click on the values within that drop-down to be taken to that
location in the trace.
Statistics categories
SAS/SATA
SATA only
Link utilization
Link utilization
SAS primitives
SATA primitives
Primitives
SATA PM
PM
Connections (Type/Channel)
Connections (Link/Type)
SSP frames
STP frames
Frames
SMP frames
SCSI commands
SCSI IO
SCSI queue depth
SCSI tasks
ATA commands
ATA commands
ATA IO
ATA IO
NCQ queue depth
NCQ queue depth
ATAPI commands
ATAPI commands
ATAPI IO
ATAPI IO
OOB
OOB
Speed negotiation
Speed negotiation
Errors
Errors
08 | Keysight | SAS (Serial Attached SCSI) and SATA (Serial ATA) Protocol Analyzers - Data Sheet
U3055A/U3056A – BusXpert Pro II 12 Gb SAS/6 Gb SATA Analyzer
The SerialTek BusXpert Pro II is our flagship SAS and SATA analyzer. It features
the HD Mini-SAS connectors for 4-port connections, the industry's largest
buffer up to 72 GB and is small enough to easily transport around the lab or in
the field. Multiple units can be cascaded together for recording multiple ports
simultaneously and viewed in the same GUI.
Key features:
–
–
–
–
–
–
–
–
E nhanced gigabit ethernet > 70 MB/s
500 picosecond timestamp resolution
Eye-opener front end
Tunable RX/TX signaling
Cascadeable up to 4 BusXpert Pro platforms
Supports 1.5/3.0/6.0/12.0 (SAS Only) Gbps
Deep triggering and filtering
Trace buffer up to 72 GB
Hardware specifications:
–
–
–
easures 10" x 14" x 3.5"
M
Weighs 10 lbs
Status LEDs per port pair for
– Auto speed detection
– OOB present
– Link up/down
– Frames present
– 10b error detection
– Commands present
– Command errors
In addition to the features above, the BusXpert Pro II
also supports:
–
–
–
–
–
E xternal trigger in/out
Manual trigger button
(3) 7 Segment display for unit # and IP address
12 Gb SAS analyzer with support for 6 Gb/3 Gb SATA/STP
Windows and Linux compatibility for both the GUI and API
09 | Keysight | SAS (Serial Attached SCSI) and SATA (Serial ATA) Protocol Analyzers - Data Sheet
U3052C/U3057A – BusXpert PRO Series SAS/SATA Analyzer
The SerialTek BusXpert Pro is the workhorse for 4 port analysis of SAS and
SATA. It features the optional Mini-SAS connectors for 4-port connections, the
industry's largest buffer up to 36 GB and is small enough to easily transport
around the lab or in the field. Multiple units can be cascaded together for
recording multiple ports simultaneously and viewed in the same GUI.
Key features:
–
–
–
–
–
–
–
–
–
–
–
–
CI express > 550 MB/s
P
Enhanced gigabit ethernet > 70 MB/s
Native PHY
Fast data re-lock
2 ns timestamp resolution
Eye-opener front end
Tunable RX/TX signaling
Cascadeable up to 4 BusXpert Pro platforms
Available with either mini-SAS or SATA 7-pin connectors
Supports 1.5/3.0/6.0 Gbps
Deep trigger and filter
Trace buffer up to 36 GB
Hardware specifications:
–
–
–
easures 8.5" x 14" x 3.5"
M
Weighs 10 lbs
Status LEDs per port pair for
– Auto-MUX detection
– Auto speed detection
– OOB present
– Link up/down
– Frames present
– 10b error detection
– Commands present
– Command errors
In addition to the features above, the BusXpert Pro also supports:
–
–
–
–
–
E xternal trigger in/out
Manual trigger button
SATA-only option for SATA analyzer
SAS analyzer with support for SATA/STP
Windows and Linux compatibility for both the GUI and API
10 | Keysight | SAS (Serial Attached SCSI) and SATA (Serial ATA) Protocol Analyzers - Data Sheet
U3051C – BusXpert Micro Series SAS/SATA Analyzer
The BusXpert Micro Series SAS and SATA analyzer has a very portable
form-factor, making it a preferred choice for those developers needing a compact platform with minimal noise and size. Its small dimensions also make it
easy to take along in the field and to move it from bench to bench in the lab.
The analyzer comes with several status LEDs for a quick visual reference of
what is occurring on the bus. It also supports trigger in/out for those needing to
trigger a scope or logic analyzer. The BusXpert Micro Series is our most capable
SAS/SATA analyzer for complete SAS and SATA protocol analysis. It features
the industry's largest buffer, offering options from 2 GB up to 9 GB. It also has
the industry's most in-depth triggering, with up to three simultaneous sequencers. Each sequencer can contain up to 16 states with timers, counters, and the
ability to jump anywhere within the sequence. The BusXpert GUI also makes it
easier for developers to create triggers and understand what is happening on
the bus, and it displays the data in a meaningful format.
Key features:
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
CI express > 550 MB/s
P
Enhanced gigabit ethernet > 70 MB/s
Native PHY
Fast data re-lock
2 ns timestamp resolution
Eye-opener front end
Tunable RX/TX signaling
Cascade-able up to 2 BusXpert Micro Systems
SATA 7-pin connectors
1-port or 2-port (full duplex links)
5 V/12 V controllable external power connector
License for SAS/SATA or SATA-only
Software configurable for 3.0/6.0 Gbps
Deep trigger and filter
Trace buffer up to 9 GB
11 | Keysight | SAS (Serial Attached SCSI) and SATA (Serial ATA) Protocol Analyzers - Data Sheet
U3051C – BusXpert Micro Series SAS/SATA Analyzer (continued)
Hardware specifications:
–
–
–
easures 6” x 9” x 1.75”
M
Weighs less than 3 lbs
Status LEDs per port pair for
– Auto speed detection
– OOB present
– Link Up/Down
– Frames present
– 10b error detection
– Commands present
– Command errors
In addition, the BusXpert Micro also supports:
–
–
–
–
–
E xternal trigger in/out
Manual trigger button
SATA-only option for SATA analyzer
SAS analyzer with support for SATA/STP
Cascade with BusXpert Micro and MicroLite USB analyzer for simultaneous
record and display of SAS/SATA and USB traffic
– Windows and Linux compatibility for both the GUI and API
12 | Keysight | SAS (Serial Attached SCSI) and SATA (Serial ATA) Protocol Analyzers - Data Sheet
U3053C – BusMod Error Injector + BusGen BIST Generator
Validating design robustness with reliable tools
For today’s SAS and SATA developers and integrators, verifying design robustness and error recovery can be a challenging task, especially when it is difficult
to duplicate test cases and customer issues. Troubleshooting is further complicated by ever-climbing storage capacities, network architectures, data rates, and
protocol complexity. The BusMod Error Injector gives designers the ability to
insert a variety of errors into a live data stream to test real-time error handling,
system recovery, and duplication of issues seen in the field. Used in conjunction
with the BusXpert SAS/SATA analyzers, users can easily verify correct and
incorrect responses to issues caused by the error injector. BusMod’s error injection provides the ability to create random and defined line errors such as CRC
or 8b10b encoding errors, modify or replace frames, frame data and primitives.
BusMod also has the capability of generating the SATA Built-In-Self-Test (BIST)
frame for testing physical compliance of both hosts and devices. Used with
the Frame Error Rate Counter (FERC) capability of the BusXpert analyzers, the
BusMod Micro and Pro systems become versatile SATA compliance test tools.
Creating test scripts is easy using the SerialTek GUI. The interface is very similar
to the BusXpert software to maintain ease and simplicity of use. Below are
some examples of the U3052C GUI and capabilities.
13 | Keysight | SAS (Serial Attached SCSI) and SATA (Serial ATA) Protocol Analyzers - Data Sheet
U3053C – BusMod Error Injector + BusGen BIST Generator (continued)
For SATA physical layer compliance testing, users can instead send out the BIST
frame and specify the different types of BIST commands, patterns, and so on.
14 | Keysight | SAS (Serial Attached SCSI) and SATA (Serial ATA) Protocol Analyzers - Data Sheet
U3053C – BusMod Error Injector + BusGen BIST Generator (continued)
The diagram below shows how a combination of the right tools could be a very
powerful test setup for SAS and SATA physical compliance testing:
Keysight 90000 Series
Keysight J-BERT
Frame error counter
BIST generator
Device
undertest
In the diagram above, the BusGen sends a SATA BIST frame to put the device
under test into a special loop-back test mode. The J-BERT is then used to send
compliance patterns with varying levels of jitter. The device sends the pattern
back, and the BusXpert, using its Frame Error Counter capability, counts if there
are any CRC errors in the frames from the device. The scope is used to verify the
eye pattern of the device under test.
15 | Keysight | SAS (Serial Attached SCSI) and SATA (Serial ATA) Protocol Analyzers - Data Sheet
System Requirements
To get the best performance out of your BusXpert Analyzer, we recommend the
following systems:
Minimum configuration:
1.5 GHz Celeron or AMD equivalent processor, 1 GB of memory, Gigabit Ethernet
and/or USB, Graphics capable of supporting 1024 x 768.
Recommended Configuration:
2.8 GHz or greater processor, 3 GB or greater of 1.3 GHz FSB memory, PCIe™
x4 or ExpressCard slot, Graphics capable of supporting 1920 x 1200 or greater
BusXpert software is compatible with Windows XP and Windows Vista and
Windows 7; 32 and 64-bit platforms. BusXpert requires 100 MB for installation.
Additional disk space is recommended for storing traces.
The following information applies to all SAS/SATA analyzers:
Model
Description
Analyzer control
Analyzer operation is controlled from PC based software
operating through Ethernet connection or PCIe.
Operating system
Microsoft Windows 32 or 64 bit OS.
Trigger in
SMA connector to the FPGA sequencer logic though the
buffer powered by 3.3 V with 1 K pull-down resistor.
Trigger out
SMA connector with LVCMOS25 driver, 6 ma drive strength,
external trigger modes are: Pulse high, Pulse low, and
Toggle.
Environment and safety
This instrument is intended for indoor use in an installation
category II, pollution degree 2 environment.
Temperature
Operating: 20 to 30 °C
Non-operating: –40 to +70 °C
Humidity
(non-condensing)
Operating: 50% to 80% at 30 °C
Safety
Safety IEC 61010-1:2001 / EN 61010-1:2001
Canada: CAN/CSA C22.2. No 61010-1-04
USA: ANSI/UL 61010-1:2004
Non-operating: 90% for 12 hours at 65 °C
Pollution degree: 2
Environmental rating: Standard
16 | Keysight | SAS (Serial Attached SCSI) and SATA (Serial ATA) Protocol Analyzers - Data Sheet
Ordering Information
Physical specifications
SerialTek Model
Series
Cable
type
Pro II
U3056A
Pro II
U3055A
Pro
Series
Pro
Series
Micro
Series
Micro
Series
jammer
U3057C
HD
4
MiniSAS
HD
4
MiniSAS
MiniSAS 4
U3052C
MiniSAS 4
U3051C
SATA
(x2)
SATA
(x2)
U3053C
Port Protocol
count support
1, 2
1, 2
Protocol
speeds
SAS/SATA 1.5/3/6/12
Gbps
SAS/SATA 1.5/3/6/12
Gbps
SAS/SATA 1.5 /3/6
Gbps
SAS/SATA 1.5 /3/6
Gbps
SAS/SATA 1.5 /3/6
SATA only Gbps
SAS/SATA 1.5 /3/6
SATA only Gbps
Buffer
options
Trigger
72 GB
8 seq/
16 state
6, 18, 36 GB 8 seq/
16 state
36 GB
8 seq/
16 state
4, 9, 18 GB 8 seq/
16 state
2, 4, 9 GB
4 seq/
16 state
NA
1 seq/
16 state
PC control interface
USB 3.0
GbE
Y
Y
Y
Y
N
Y
N
Y
N
Y
N
Y
Power
100 to 240
PCIe
VAC
50 to 60 Hz
x4 200 W
internal
x4 200 W
internal
x4 150 W
internal
x4 150 W
internal
x4 90 W
external
x4 90 W
external
Size
Weight
10"x14"x3.5"
12 lbs
10"x14"x3.5"
12 lbs
8.5"x14"x3.5" 10 lbs
8.5"x14"x3.5" 10 lbs
6"x9"x1.75"
3 lbs
6"x9"x1.75"
3 lbs
U3051C Micro – 2 Port 6 Gbps SAS/SATA Protocol Analyzer
U3051C
When ordering the U3051C, you must also order one of the available 6
configuration options.
U3051C-001
3 G, SATA, 1 port,
2 GB memory
Enables SATA I and SATA II (1.5 Gbps and
3.0 Gbps) operation, enables a 2 GB capture buffer
for one port only. This ”Lite” configuration support
a single trigger sequence of a single state and a
single buffer segment.
U3051C-002
6 G, SATA, 1 port,
2 GB memory
Enables SATA I, II, III (1.5 Gbps, 3.0 Gbps, and
6 Gbps) operation, enables a 2 GB capture buffer
for one port only. Full support for multi-state
triggering, with multiple sequences and buffer
segments.
U3051C-003
6 G, SATA, 1 port,
4 GB memory
Enables SATA I, II, III (1.5 Gbps, 3.0 Gbps, and
6 Gbps) operation, enables a 4 GB capture buffer
for one port only. Full support for multi-state
triggering, with multiple sequences and buffer
segments.
U3051C-004
6 G, SATA, 2 port,
4 GB memory
Enables SATA I, II, III (1.5 Gbps, 3.0 Gbps, and
6 Gbps) operation, enables a 4 GB capture
buffer for two ports. Full support for multi-state
triggering, with multiple sequences and buffer
segments.
U3051C-005
6 G, SAS & SATA,
2 port, 4 GB
memory
Enables SAS and SATA I, II, III (1.5 Gbps, 3.0 Gbps,
and 6 Gbps) operation, enables a 4 GB capture
buffer for two ports. Full support for multi-state
triggering, with multiple sequences and buffer
segments.
U3051C-006
6 G, SAS & SATA,
2 port, 9 GB
memory
Enables SAS and SATA I, II, III (1.5 Gbps, 3.0 Gbps,
and 6 Gbps) operation, enables a 9 GB capture
buffer for two ports. Full support for multi-state
triggering, with multiple sequences and buffer
segments.
17 | Keysight | SAS (Serial Attached SCSI) and SATA (Serial ATA) Protocol Analyzers - Data Sheet
U3052C and U3057C PRO – 4 Port 6 Gbps SAS/SATA Protocol Analyzer
U3052C
When ordering the U3052C, you must also order one of the available
two configuration options.
U3052C-001
Pro analyzer,
4 port, 6 Gbps
link speed, SAS
and SATA, 9 GB
capture memory
Enables SAS and SATA I, II, III (1.5 Gbps, 3.0 Gbps,
and 6 Gbps) operation, enables a 9 GB capture
buffer for four ports. Full support for multi-state
triggering, with multiple sequences and buffer
segments.
U3052C-002
Pro analyzer,
4 port, 6 Gbps
link speed, SAS
and SATA, 18 GB
capture memory
Enables SAS and SATA I, II, III (1.5 Gbps, 3.0 Gbps,
and 6 Gbps) operation, enables a 18 GB capture
buffer for four ports. Full support for multi-state
triggering, with multiple sequences and buffer
segments.
U3057C
When ordering the U3057C, there are no available options.
Pro analyzer,
4 port, 6 Gbps
link speed, SAS
and SATA, 36 GB
capture memory
Enables SAS and SATA I, II, III (1.5 Gbps, 3.0 Gbps,
and 6 Gbps) operation, enables a 36 GB capture
buffer for four ports. Full support for multi-state
triggering, with multiple sequences and buffer
segments.
18 | Keysight | SAS (Serial Attached SCSI) and SATA (Serial ATA) Protocol Analyzers - Data Sheet
U3055A and U3056A PRO II – 4 Port 12 Gbps SAS/SATA Protocol Analyzer
U3055A
When ordering the U3055A, you must also order one of the available
three configuration options.
U3055A-001
Pro II analyzer, 4 port,
12 Gbps link speed, SAS,
9 GB capture memory
Enables SAS at 12 Gbps and SAS and SATA
I, II, III (1.5 Gbps, 3.0 Gbps, and 6 Gbps)
operation, enables a 9 GB capture buffer
for four ports. Full support for multi-state
triggering, with multiple sequences and
buffer segments.
U3055A-002
Pro II analyzer, 4 port,
12 Gbps link speed, SAS,
18 GB capture memory
Enables SAS at 12 Gbps and SAS and SATA
I, II, III (1.5 Gbps, 3.0 Gbps, and 6 Gbps)
operation, enables a 18 GB capture buffer
for four ports. Full support for multi-state
triggering, with multiple sequences and
buffer segments.
U3055A-003
Pro II analyzer, 4 port,
12 Gbps link speed, SAS,
36 GB capture memory
Enables SAS at 12 Gbps and SAS and SATA
I, II, III (1.5 Gbps, 3.0 Gbps, and 6 Gbps)
operation, enables a 36 GB capture buffer
for four ports. Full support for multi-state
triggering, with multiple sequences and
buffer segments.
U3056A
When ordering the U3056A, there are no available options.
Pro analyzer, 4 port,
6 Gbps link speed, SAS
and SATA, 72 GB capture
memory
Pro II analyzer, 4 port
12 Gbps link speed, SAS,
72 GB capture buffer
Enables SAS at 12 Gbps and SAS and SATA
I, II, III (1.5 Gbps, 3.0 Gbps, and 6 Gbps)
operation, enables a 72 GB capture buffer
for four ports. Full support for multi-state
triggering, with multiple sequences and
buffer segments.
19 | Keysight | SAS (Serial Attached SCSI) and SATA (Serial ATA) Protocol Analyzers - Data Sheet
U3053C – 2 Port 6 Gbps SAS/SATA and
SATA Error Insertion (Jammer) and BIST
U3053C
When ordering the U3053C, you must also order one of the available
three configuration options.
U3053C-001
BIST generator, 1 port,
6 Gbps, SATA only
Enables SATA I, II, III (1.5 Gbps, 3.0 Gbps,
and 6 Gbps), SATA BIST operation on one
port only.
U3053C-002
Micro BusMod error
injector, 1 port and BIST
generator, 1 port, 6 Gbps
link speed, SATA only
Enables SATA I, II, III (1.5 Gbps, 3.0 Gbps,
and 6 Gbps) SATA BIST operation on one
port and error injection on one port.
U3053C-003
Micro BusMod error
injector, 2 port and BIST
generator, 1 port, 6 Gbps
link speed, SATA only
Enables SATA I, II, III (1.5 Gbps, 3.0 Gbps,
and 6 Gbps) SATA BIST operation on one
port and error injection on two ports.
U3053C-004
Micro BusMod error
injector, 2 port and BIST
generator, 1 port, 6 Gbps
link speed, SAS and SATA
Enables SAS and SATA I, II, III
(1.5 Gbps, 3.0 Gbps, and 6 Gbps) SATA
BIST operation on one port and error
injection on two ports.
Optional Accessories When Preferred Connection Is PCIe
U3052C-OC-ACCS
Accessories
U4601A
PCIe XpressCard adapter for laptop connections
U4602A
PCIe x4 card (slot adapter) for desktop connections
U4603A
PCIe x4 cable, 2 meters long
U4604A
PCIe x4 cable, 3 meters long
20 | Keysight | SAS (Serial Attached SCSI) and SATA (Serial ATA) Protocol Analyzers - Data Sheet
myKeysight
www.keysight.com/find/mykeysight
A personalized view into the information most relevant to you.
www.axiestandard.org
AdvancedTCA® Extensions for Instrumentation and Test (AXIe) is an
open standard that extends the AdvancedTCA for general purpose and
semiconductor test. Keysight is a founding member of the AXIe consortium.
ATCA®, AdvancedTCA®, and the ATCA logo are registered US trademarks of
the PCI Industrial Computer Manufacturers Group.
www.lxistandard.org
LAN eXtensions for Instruments puts the power of Ethernet and the Web
inside your test systems. Keysight is a founding member of the
LXI consortium.
www.pxisa.org
PCI eXtensions for Instrumentation (PXI) modular instrumentation delivers a
rugged, PC-based high-performance measurement and automation system.
Three-Year Warranty
www.keysight.com/find/ThreeYearWarranty
Keysight’s commitment to superior product quality and lower total cost
of ownership. The only test and measurement company with three-year
warranty standard on all instruments, worldwide.
Keysight Assurance Plans
www.keysight.com/find/AssurancePlans
Up to five years of protection and no budgetary surprises to ensure
your instruments are operating to specification so you can rely on
accurate measurements.
www.keysight.com/quality
Keysight Technologies, Inc.
DEKRA Certified ISO 9001:2008
Quality Management System
Keysight Channel Partners
www.keysight.com/find/channelpartners
Get the best of both worlds: Keysight’s measurement expertise and product
breadth, combined with channel partner convenience.
PCI-SIG®, PCIe® and the PCI Express® are US registered
trademarks and/or service marks of PCI-SIG.
For more information on Keysight
Technologies’ products, applications or
services, please contact your local Keysight
office. The complete list is available at:
www.keysight.com/find/contactus
Americas
Canada
Brazil
Mexico
United States
(877) 894 4414
55 11 3351 7010
001 800 254 2440
(800) 829 4444
Asia Pacific
Australia
China
Hong Kong
India
Japan
Korea
Malaysia
Singapore
Taiwan
Other AP Countries
1 800 629 485
800 810 0189
800 938 693
1 800 112 929
0120 (421) 345
080 769 0800
1 800 888 848
1 800 375 8100
0800 047 866
(65) 6375 8100
Europe & Middle East
Austria
Belgium
Finland
France
Germany
Ireland
Israel
Italy
Luxembourg
Netherlands
Russia
Spain
Sweden
Switzerland
United Kingdom
0800 001122
0800 58580
0800 523252
0805 980333
0800 6270999
1800 832700
1 809 343051
800 599100
+32 800 58580
0800 0233200
8800 5009286
0800 000154
0200 882255
0800 805353
Opt. 1 (DE)
Opt. 2 (FR)
Opt. 3 (IT)
0800 0260637
For other unlisted countries:
www.keysight.com/find/contactus
(BP-07-10-14)
This information is subject to change without notice.
© Keysight Technologies, 2013 - 2014
Published in USA, August 3, 2014
5991-1494EN
www.keysight.com
Download PDF