Bee-Bot® Docking Station

Warranty & Support
This product is provided with a one year warranty for problems found during normal
usage. Mistreating the Bee-Bot Docking Station or opening the unit will invalidate this
warranty.
All out of warranty repairs will be subject to a replacement fee.
Technical Support
Please visit www.tts-group.co.uk for the latest product information.
Email feedback@tts-group.co.uk for technical support.
TTS Group Ltd.
Park Lane Business Park
Kirkby-in-Ashfield
Nottinghamshire,
NG17 9GU, UK.
Freephone: 0800 318686 Freefax: 0800 137525
TTS is proud to be part of
Bee-Bot®
TTS Product Code:
EL00145
Docking Station
WARNING: Do not dispose of this product in
household waste. Hand it over to a collection point
for recycling electronic appliances.
WARNING! Not suitable for children under 36 months
due to small parts – choking hazard. Made in China,
on behalf of the TTS Group Ltd.
Nxxxxx
N448
plc
7.5V
Bee-Bot®
Docking Station
Easy to carry, wall mountable
USER GUIDE
The Bee-Bot Docking Station is not only easy to carry and move around, but is also an
excellent storage device – it’s even wall mountable (fixtures not included). The Docking
Station houses up to 6 rechargeable Bee-Bots and the Bee-Bots are easily recharged by
plugging the Docking Station into a mains power supply.
Important Information
Please read all instructions carefully before using.
Please retain the packaging and these instructions for future reference.
n Do not allow your Bee-Bot Docking Station to come into contact with water or
other liquids.
Contents
2
Important Information
2
Know Your Bee-Bot Docking Station
3
Recharging Your Bee-Bot
3
Troubleshooting
5
Power Supply Specification
5
Warranty & Support
6
Bee-Bot® Docking Station
Know Your Bee-Bot Docking Station
Power Indicator
Carry handle
DC Input Socket
USB Connector
Recharging Your
Bee-Bots
The Bee-Bots are recharged by inserting
them into the Docking Station and
plugging the Docking Station into the
mains, using the mains power adapter
included. Up to 6 Bee-Bots may be
charged at the same time in the Docking
Station.
3
International Charger
The Bee-Bot Docking Station is supplied
with a multi-region adaptor. The adaptor is
supplied with the UK plug fitted but you can
change this easily to suit any country. Press
the release button and slide the UK plug out
and replace with the required plug module.
Slide the plug module in until it “clicks” in
place securely.
The safety isolating transformer to be used
with the Docking Station should be regularly
examined for potential hazards such as
damage to the cable, cord, plug, enclosure or
other parts. In the event of any damage, the
Docking Station must not be used until the
damage has been properly repaired.
n The Docking Station is not intended for children under 3 years old.
n The transformer is not a toy.
n The Docking Station must only be used with the recommended transformer.
4
Bee-Bot® Docking Station
Power Supply Specification
The Bee-Bot Docking Station is designed to work reliably and predictably in normal
conditions. However, it is possible that problems may occur. Please check the following
before contacting technical support:
Feature
Specification
Input Voltage
100 – 240V a.c.
Frequency
50 – 60 Hz
Standby power
0.3W (Max)
Output Voltage
5.5V d.c. ± 5%
Output Current
3000mA (Max)
Output power
7.5W
Troubleshooting
Problem
Solution
Power LED does not light
Check that the mains adaptor is connected and
the mains outlet is switched on.
I cannot fit the Bee-Bot into the
Docking
Make sure that the Bee-Bot is facing
outwards. Make sure that the Bee-Bot is the
rechargeable version
The Bee-Bots do not charge
Ensure that the power LED is on and that all
Bee-Bots are switched off whilst charging.
5
Download PDF