CM6800 Matrix Switcher/Controller

C1522 CM6800 2-06.fm Page 494 Tuesday, January 16, 2007 7:22 AM
PRODUCT SPECIFICATION
control site
CM6800 Matrix Switcher/Controller
MICROPROCESSOR-BASED, CROSS-POINT VIDEO SWITCHER, 32 X 6
Product Features
• 32 Video Inputs, 6 Video Outputs
• Inputs Allow for Viewing and Control of Cameras, Domes, PTZs,
Multiplexers, and Other Devices
• Includes Multiple Language Menus and On-Screen Text
• Video Inputs Individually Selectable for Terminating or Looping with
Switches on Rear Panel
• Supports Coaxitron® and RS-422 Camera Control
• Password-Protected Menu Programming
• Windows®-Based Manager Software
• System Partitioning Prevents Unauthorized Viewing and Control
• Integrated Color Bar Generator
• Wide Selection of Peripheral Components, Including Keyboards,
Alarm Boxes, and Relay Boxes
The CM6800 Matrix switcher/controller is a very affordable single
box solution for medium-sized matrix switch applications. This fully
integrated package offers a highly versatile, cross-point matrix
switcher. The CM6800 provides switching and control from any one
of up to 10 keyboards. The system can also be used to control other
devices, such as Genex® multiplexers.
• Macro Programming and Event Timers Automate System Operation
• Multiple Built-in ASCII Communication Ports
• Remote Viewing and Control Over TCP/IP Networks Using PelcoNet ™
Macros may also activate preset positions and auxiliaries on
suitably equipped (PTZ or dome) receivers; and activate external
relays to turn on lights, lock doors, or control other auxiliary
functions (additional equipment may be required).
The CM6800 provides easy-to-use, password-protected, on-screen
programming menus. Eight different languages are supported.
Built-in video loss detection alerts operators or technicians of
camera failure. Logical camera numbering provides the ability to
assign any camera number to the physical input. An integral color
bar generator allows the user to adjust monitor settings.
The CM6800 is designed to be remotely operated from desktop
keyboards or external computer systems. Programming the system
is easy using on-screen menus and a system keyboard or the
Windows®-based system management software. The manager
software allows for remote programming and external storage of all
user setups.
With the CM6800 the system manager can select from a wide
variety of alarm handling and display options. An alarm can trigger a
macro, preset, or pattern, and alarmed cameras can be displayed on
one or several monitors. There are also choices for the order in
which alarms are displayed, alarm priorities, automatic or manual
acknowledgement, and activation of auxiliaries.
The user-enabled character display shows time and date, operation
mode, camera number, and a 20-character title for quick, easy
identification of the on-screen video.
Multiple ports are provided for PTZ control and keyboards. A single
data line, using Pelco’s M protocol, can accommodate various types
of equipment, such as keyboards and external alarm interface units.
RS-232 ports allow for communication with a PC. Peripheral
components allow for expansion of alarms, relay contacts, and
keyboards.
The CM6800 supports powerful system macros (32) and programmable sequences (16), which allow activation of commonly occurring events based on time/calendar or alarms. Macros provide quick
call-up of multiple cameras to multiple monitors.
C1522 / REVISED 1-07
International Standards
Organization Registered Firm;
ISO 9001 Quality System
C1522 CM6800 2-06.fm Page 495 Tuesday, January 16, 2007 7:22 AM
TECHNICAL SPECIFICATIONS
MATRIX SWITCHER
The CM6800 matrix switcher/controller provides switching and control for up to thirty-two video
inputs and six monitor outputs from any one of up to ten keyboards, PCs and other devices.
The CM6800 can be controlled from a local or remote keyboard, or from an external computer.
Additionally, it can be used with Genex multiplexers to display multiple camera views on a
monitor. The CM6800 features menu-driven, password-protected programming either directly from
the switcher or with the CM6800-MGR software package installed on a personal computer.
Programming menus and onscreen text are provided in eight languages – English, French, German,
Italian, Polish, Portuguese, Russian, and Spanish. Multiple ports are provided for PTZ control,
keyboards, and peripheral components.
MODELS
CM6800-32X6
CM6800-32X6-X
GENERAL
Memory Protection
Keyboards
Total Capacity
Keyboard Power
Receiver/Dome Control
Alarm Inputs
Additional Outputs
Switcher/controller, 32 video inputs, 6 video
outputs, NTSC
Switcher/controller, 32 video inputs, 6 video
outputs, PAL
Communication Ports
Lithium battery provides five years of data
protection.
System Macros
Programmable Sequences
Ambient Operating
Temperature
Humidity
Ten: eight KBD100/200A/300A Series
keyboards and two KBD960 Series keyboards
CM6800-32X6 can provide power for one
KBD100/200A/300A Series keyboard.
Additional keyboards require a remote power
supply.
Coaxitron® and RS-422
Eight individually programmable for N.O. or
N.C. on rear panel (plus an additional 128, via
ALM2064, Alarm Interface Units, providing a
total of 136 possible)
Control Outputs on Rear Panel
Relay (SPDT)
One, rated at 0.5 amp at 125 VAC, 1 amp at
30 VDC, 60 milliohms contact resistance
Open Collector (TTL)
One; 15 VDC maximum, 25 mA maximum
CAMERA 32
CAMERA 1
KBD300A
ELECTRICAL
Power Source
Power Consumption
Two REL2064, Relay Interface Units, may be
connected to expand relay outputs to a
maximum of 128
Six total: five data ports, one PTZ control port,
flexible configuration options; 1 data port
powered for keyboards
32
16
20° to 120°F (-7° to 49°C)
10% to 90%, non-condensing
120 VAC or 230 VAC, 50/60 Hz, auto-ranging
25 W
SWITCHER CHARACTERISTICS
Video Inputs
Thirty-two, BNC, terminating or looping
(individually selectable per camera) 0.5 to
2 Vp-p composite video, video loss detection
Video Outputs
Six outputs, BNC
Switching Type
Cross-point video matrix. NTSC and PAL
compatible
Switching Method
Vertical interval switching
Switching Time
Less than 16 milliseconds (typical)
ALARM 1
ALARM 8
KBD300A
SPECTRA
CM6800-32X6
PTZ
CONTROL
PC
GENEX MULTIPLEXER
CM9505 UPS
KBD960
REL2064 (ADDITIONAL RELAYS)
MONITOR 1
MONITOR 6
ALM2064 (ADDITIONAL RELAYS)
SAMPLE CM6800-32X6 SYSTEM
C1522 CM6800 2-06.fm Page 496 Tuesday, January 16, 2007 7:22 AM
TECHNICAL SPECIFICATIONS
VIDEO
Bandwidth
Frequency Response
Signal-to-Noise Ratio
Adjacent Channel Crosstalk
Differential Gain
Differential Phase
Line Tilt
Field Tilt
Gain
DC Output
Video Cable Distances
15 MHz
Flat to 8 MHz, ±1 dB to 13 MHz
-44.26 dB (peak-to-peak vs. RMS noise)
-56.47 dB at 3.58 MHz
0.11%
0.06 degrees
0.20%
0.56%
Unity (±1 dB)
Zero volts
Minimum cable requirements:
• 75 ohms impedance
• All-copper center conductor
• All-copper braided shield with 95% braid
coverage
Cable Type
RG59/U
RG6/U
RJ11/U
Maximum Distance
750 ft (228 m)
1,000 ft (304 m)
1,500 ft (457 m)
CHARACTER GENERATION
Character Type
White with black outline, adjustable
brightness
Camera Identification
Two lines, twenty character title, plus camera
number, monitor number, date (4 formats) and
time (24-hour or AM/PM formats); each item
user-selectable
Programmable
On-screen, menu driven
Character Set
128 ASCII characters
MECHANICAL
Dimensions (switcher only)
Mounting (switcher only)
Weight (switcher only)
Unit
Shipping
12.25" D x 17.40" W x 5.25" H
(31.12 x 44.20 x 13.34 cm)
Factory configured for EIA rack mount (3 RU);
rack ears can be removed for versatile wall
mount or freestanding applications
11.6 lb (5.22 kg)
18 lb (8.1 kg)
CM6800-32X6 REAR PANEL
Video Inputs, 1-32, terminating or looping (individually selectable per camera)
Video Outputs (monitor), 1-6
010101
RJ-45 Data Ports, COM 2-5 (used to connect keyboards, Genex, and other peripheral devices, such as alarm interface units)
COM 1 Data Port (DB-9 connection; used to connect a PC or ASCII device)
Alarm Inputs, 1-8 (N.C. or N.O.; in addition, up to four ALM2064 units can be connected using a data port)
PTZ Control Port, PTZ-A (RS-422 output can control video sources using D or P protocol; up to four CM9760-CDU-T units can be connected for additional
receiver capacity)
Auxiliary Control Output (one relay output, one open collector output; in addition, up to two REL2064 units can be connected using a data port)
C1522 CM6800 2-06.fm Page 497 Tuesday, January 16, 2007 7:22 AM
SYSTEM COMPONENTS
MODELS
OPTIONAL ACCESSORIES
Matrix Switcher
CM6800-32X6
CM9760-CDU-T
CM6800-32X6-X
Switcher/controller, 32 video inputs, 6 video
outputs, NTSC, 120/230 VAC, 50/60 Hz
Switcher/controller, 32 video inputs, 6 video
outputs, PAL, 120/230 VAC, 50/60 Hz
KBDKIT
Keyboards
KBD960
Full-function desktop variable-speed
keyboard, white finish; 100-240 VAC,
50/60 Hz.
KBR960
Full-function 19-inch EIA rack mount keyboard
(4 RUs); black finish; 100-240 VAC, 50/60 Hz.
A suffix of -US, -UK, -AU, or -EU, designating a region-specific power cord, is
added to the above model numbers when ordering. For example, a KBD960-US
is a desktop keyboard with a power cord for use in the United States.
KBD300A*
Desktop system keyboard with full switching
and programming capabilities, plus joystick
control of PTZ functions.
KBD200A*
Desktop keyboard, multi-speed PTZ
KBD100*
Desktop keyboard, no PTZ
* 25-foot cable supplied. If distance between switcher and keyboard exceeds
25 feet or if using more keyboards than the switcher can power, use
KBDKIT/KBDKIT-X (CM6800-32X6 can provide power for one KBD100/
200A/300A Series keyboard). KBDKIT/KBDKIT-X required when wiring more
than one keyboard to a single keyboard port.
Interface Units
ALM2064
REL2064
Alarm interface unit; provides alarm
monitoring capabilities for up to 64 alarm
inputs. 100-240 VAC, 50/60 Hz, auto-ranging.
(1 RU)
Relay interface unit; provides 64 relays for
operating peripheral equipment. 100-240 VAC,
50/60 Hz, auto-ranging. (1 RU)
Note: Cannot be controlled from KBD100.
Pelco Worldwide Headquarters:
3500 Pelco Way, Clovis, California 93612-5699 USA
USA & Canada Tel: (800) 289-9100 • FAX (800) 289-9150
International Tel: (559) 292-1981 • FAX (559) 348-1120
www.pelco.com
KBDKIT-X
PV140
PelcoNet™
VMX300 Series
Code distribution unit; 16-channel RS-422
transmit only (2 data wires and ground)
distributor. Primarily used for configuring up to
16 pan/tilt/zoom receivers in a “star”
configuration.
Remote keyboard wiring kit; includes two
RJ-45 wall blocks and one 120 VAC to 12 VAC
transformer. Use when distance between
switcher and keyboard exceeds 25 feet or if
using more keyboards than the switcher can
power (CM6800-32X6 can provide power for
one KBD100/200A/300A Series keyboard).
Required when wiring more than one
keyboard to a single keyboard port.
Same as KBDKIT except includes 230 VAC to
12 VAC transformer
Converter kit, RS-232/RS-422, with 12 VDC
power supply
Transmission system for PTZ functions,
camera control, and remote site viewing
Video management system; graphical map/
icon-based user interface for mouse-driven
operator control from external PC
CERTIFICATIONS/RATINGS
•
•
•
•
CE, Class B (CM6800-32X6-X, KBD960/KBR960 Series)
UL Listed (CM6800-32X6)
UL Listed to Canadian safety standards (CM6800-32X6)
FCC, Class B (CM6800-32X6)
Pelco, the Pelco logo, Spectra, Genex, and Coaxitron are registered trademarks of Pelco.
Windows is a registered trademark of Microsoft Corporation.
PelcoNet is a trademark of Pelco.
Specifications subject to change without notice.
©Copyright 2007, Pelco. All rights reserved.
Download PDF