MANUAL
Pickup Microphone
VM-101Q
Features:
•
•
•
•
•
•
Easily add audio surveillance to existing CCTV installations.
Sensitivity rating of -62 dB ±3 dB for capturing audio.
Line-level output suitable for use with most recording devices.
Low current consumption: 10 mA @ 12 VDC.
Includes 18” (45 cm) length power and audio cable.
Mounting clip included for easier installation.
Specifications:
Sensitivity
Operating voltage
Audio output
Impedance
Frequency range
Dimensions
Weight
Power Consumption
Operating temperature
-62 dB ±3 dB
12 VDC (power supply not included)
Max. 2 Vpp
50~1000 Ω @ 1.0 KHz
20 Hz ~ 16 KHz
2” x ½” (50 x 14 mm)
1.1 oz. (31 g)
10 mA @ 12 VDC
14°~113° F (-10°~45° C)
NOTE: Products with a model number that ends with “Q” or have a round green “Q” sticker represent RoHS compliant products.
ENFORCER Pickup Microphone
Installation:
Note: Some State Laws prohibit types of audio surveillance. Before installation, check local
laws regarding the deployment and operation of audio surveillance equipment.
1. Determine the best location to mount and install the pickup microphone. Please be sure to
mount the camera at least 15’ (5m) away from the monitor to prevent any audio reverberation.
2. Use the included mounting clip to position and install the microphone.
3. Connect the RCA jack to the audio line, and connect the DC jack to the power supply.
4. It is recommended to listen to a sample of the audio to ensure the sound quality is sufficient
for the application.
Sample Application:
EV-122C-FVB3Q
Low-Profile UFO
Color Camera
EVT-PB1Q
CCTV Balun
Up to 2,000’ (610 m)
over Cat5e/6
EVT-PB1Q
CCTV Balun
DVR
VM-101Q
Pickup
Microphone
MAE-P115-01Q Up to 1,000’ (300 m) MAE-P115-01Q
Analog Audio
Analog Audio
over Cat5e/6
Balun
Balun
Use an optional power splitter to power the microphone from a nearby power source
WARRANTY This SECO-LARM product is warranted against defects in material and workmanship while used in normal
service for a period of one (1) year from the date of sale to the original consumer customer. SECO-LARM’s obligation is
limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM.
This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect,
repair, or alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines
that such equipment is not operating properly as a result of causes other than defects in material and workmanship.
The sole obligation of SECO-LARM, and the purchaser’s exclusive remedy, shall be limited to replacement or repair only,
at SECO-LARM’s option. In no event shall SECO-LARM be liable for any special, collateral, incidental, or consequential
personal or property damages of any kind to the purchaser or anyone else.
NOTICE: The information and specifications printed in this manual are current at the time of publication. However, the
SECO-LARM policy is one of continual development and improvement. For this reason, SECO-LARM reserves the right
to change specifications without notice. SECO-LARM is also not responsible for misprints or typographical errors.
Copyright © 2009 SECO-LARM U.S.A., Inc. All rights reserved. This material may not be reproduced or copied, in
whole or in part, without the written permission of SECO-LARM.
SECO-LARM
®
U.S.A., Inc.
16842 Millikan Avenue, Irvine, CA 92606
Tel: 800-662-0800 / 949-261-2999 Fax: 949-261-7326
2
Website: www.seco-larm.com
E-mail: sales@seco-larm.com
PITSW4
MiVM-101Q_0907.docx
SECO-LARM U.S.A., Inc.
Download PDF