7Days Action Cam
Operation Guide
Water Proof
Outdoor Sports
HD1080P Camera
Main Features

1080P HD video recording

Built-in 1.5” TFT display screen, real-time display

Professional waterproof housing: IP68 under water 30 meters

Wide view angle 150 degree

Turn on/off on the waterproof case directly by long press DC button 3 seconds

Mini size and portable to take

Replaceable and rechargeable lithium battery

1/2.5 CMOS sensor, 5.0 Mega Pixels

Auto white balance and automatic exposure

F/3.0 and night shots

Supports 3X Digital zoom

Auto stand-by for power saving

Review, delete, fast forward, reverse and skip

USB2.0

Built-in speaker and microphone

HDMI output, AV-OUT

Supports Micro SD card up to 32G

Low battery alert

Memory capacity alert

LCD power save
Packing Accessories
1. Camera x 1
3. Case Mount x 1
2. Waterproof Case x 1
4. Curved Adhesive Mountx2
5. Bike Mount x 1(optional)
7. A/V Cable x 1
6. HDMI Cable x 1(optional)
8. Screw Connector x1
9. Chest harness mount x 1(optional)
10. Headstrap Mount x 1(optional)
11. Belts x3
12. USB Cable x 1
13. Power Adapter x 1 (optional)
14. Charge Cable x 1
15. Car Charger x 1(optional)
16. Pouch x 1
17. Micro SD Card x 1 (optional)
19. Li-battery x 1
21.Surfboard x 1(optional)
18. Handline x 1
20. Manual x 1
22. Flat Adhesive Mount(optional)
23.Remote Controller x 1 (optional)
24. Rollbar Mount x 1(optional)
Note:The photos may vary from the actual objects
Quick Look
1. Record Button
2. Power on/off switch
3. LED Indicator for Power/Charge (red)
4. LED indicator for Record/photo(Green)
5. DC button
7. MIC
6. USB Socket
8. Battery slot
9. HDMI interface
11. Speaker
13. Down Button
15. Up button
17. Menu Button
10.Right button
12. palyback Button
14. OK Button
16.Left Button
18. TFT Screen
19. Lens
20. Self-timer/Auto REC indicator (red)
21. Micro SD card slot
22. AV OUT socket
23. Built-in Microphone
24. Screw thread interface
Quick Start
This Quick-start Guide introduces the basic operations and functions of HD
1080P Video Camera.
Preparations
1. Install the battery.
2. Charge the battery
Connect the camera to power with adapter. The LED will be flashing red.
When the battery is fully charged, the LED will be red.
TIPS:User can charge the camera with either USB cable or power
Adapter. The Camera can work while recharging with Power Adapter
which connecting With Adapter Cable
3. Insert the memory card.
4. Slide the power switch to ON. The following symbols will
be shown on LCD:
1080P
Record
Battery Capacity Status
Photo
Micro SD Card Capacity Status
Audio
Without Micro SD Card
00:00:00 Recording Time
With Micro SD Card
1080P Video Resolution
Playback
5. Set Date and Time
 Under the preview mode, press M to go to the main Menu.
 Press >.
 Then press the button - to select “date and time”
 Press < ok > to choose the date or time to set, then press OK.
 Press + or - to set the digits of the date and time, press OK again to
confirm the set.

Finally, press - to select the icon [√] or [X] , and press OK to confirm
that date and time to be stamped or not.
6. Set the Parameters
 Power on the camera. Press M, then press < or > to turn left or right,
press + or - to go up and down, press OK to set the menu you select,
then press M again to exit the setting.

REC modes: video mode or audio recording mode
1080P (1920 x 1080) @ 30fps
720P (1280 x 720) @ 60fps
WVGA (848 x 480) @ 60fps
QVGA (320 x 240) @ 30fps


Photo parameter: single shot mode, Triple shot mode, Self shot mode

System parameters:
Photo resolution: optional :3M/5M/8M

Date and Time: please set the time before using. The time will be
stamped at the below right corner of the video file while recording if
choosing [√].



Time display: Choose the time stamp for LCD and photo/video
Beep: turn on [√] / off [X] the sound.
Loop record: when it is in “Loop record” mode, the videos will be
saved separately every 15 minutes.

LCD standby: Press OK button, then press < or > to set LCD
Power Save Time: 0, 2, 5 and 10 minutes later to activate the
function. Press REC or DC button to wake up it.

Auto Standby: Set the video came in auto standby mode in 0, 2, 5
or 10 minutes. When video camera is in the Auto Standby mode,
press the REC or DC button to wake up it.

Language: English,French,German and more

TV standard: NTSC、PAL. Choose TV OUT format, if changing the
format, it needs to re-plug the AV extension cable to make the
change efficient.

Frequency: 50Hz, 60Hz; select it according to the local
frequencies to avoid the flicker caused by the mismatched
frequency.

Format: Press OK button, then press < or > to choose [√] or [X].
It will delete all files, including protected files.

Default: this operation will resume to the default setting
Note:

When the camera is on, long press DC button on waterproof case for 3
seconds, the camera will turn off(standby). Long press DC button on
waterproof case for 3 seconds, the camera will turn on (wake up) again.

Under Loop Record mode, the video files will be saved separately
automatically every 15 minutes. Otherwise, the video files will be saved
separately automatically every 30 minutes.

If using the digital zoom function while recording, the video file will be
bigger. It will be saved separately less than 15 or 30 minutes.
Video Recording
The Compression Technique —H.264 ensures high quality videos.
1. Make sure the memory card is high speed, then slide the power switch
to ON. The LED will lights red. The video will be shown on the LCD.
2. Under the preview mode, press the button REC, the video camera
begins recording, the recording time will appear on the screen, the
recording LED indicator flicks green slowly and the Self-timer/Auto REC
indicator flicks red slowly.
When the video camera is recording, press the button + or - to zoom in
or out (only under 720P mode). Press REC again to stop the recording.
Note:

Mirror: at preview mode, Press OK button, then press <
or > to activate
the Mirror function.
Photo Taking
Set the image resolution:
press the button M, then press the button > to select the icon PHOTO, click
the icon Resolution, and then press OK to set the image resolution.
Image resolution: 2048×1536 (3M); 2560×1920 (5M); 3200×2400 (8M)
1. Self shot:
Press the button M, then press the button > to select the icon PHOTO,
choose Self shot. Press the button OK to set the time interval: 0 sec /
5sec /10sec. In that time, press the button DC, the camera will take
pictures according to the time interval you have set.
2.
Time lapse:
Press the button M, then press the button > to select icon PHOTO,
choose Time lapse Mode, press the button OK to set the time interval: 0
sec/2 sec /3 sec /5 sec /10 sec/20 sec /30 sec /60 sec, then press the
button M to exit from the setting. Then if you press the button DC, the
camera will take pictures according to the time interval you have set.
Press the button DC again will cancel or stop photo taking.
3.
Single shot:
When the video camera is power on, press the DC button, the camera
will take one picture, the indicator light will flick one time.
4.
Triple shot:
Press the button M, then press the button > to select the icon PHOTO,
choose Triple shot Mode. Then if you press the button DC, the camera
will take three pictures consecutively.
Audio Recording
1. Press the button M, then press OK, press the button < or > to select
REC, press OK to confirm it, and then press the button M to exit.
2. Press the button REC, the green indicator light flicks slowly, the recording
time will be displayed on the screen.
Display videos photos
Under the preview mode, press the playback button to go to the interface of
playback.
● Video files: select the menu Video File, press OK to preview the recorded
video files or audio files, press the button - to go to the thumbnail preview
of files. When viewing the video files or audio files, press the button M,
you can delete or protect the files: <Delete> <delete all> <protect>
The functions of the buttons when the camera is playing video files:
1.
+:increase volume
2.
-:reduce volume
3.
4.
<:Fast Backward ( X2 or X4)
5.
Playback:pause/play
6.
OK:start/stop
>:Fast Forward ( X2 or X4)
● Audio files: press the button < or >, select the audio file you want to play,
press the button OK to start/stop playing the file. In this situation, press
the button + or - to increase or reduce the volume, press the button
PLAYBACK to pause or stop playing the file.
●
Photo files: press the button < or >, select the photo files you want to
display.
The functions of the buttons when the camera is displaying photo files:
1. +: zoom in
2. -: zoom out, thumbnail
3. < : select left pictures; in “ZOOM IN” mode, it can move up the
pictures .
4. > : select right pictures; in “ZOOM IN” mode, it can move down the
pictures.
5. Playback:exit
6,Press M button to delete the photos.
<Delete One>:Press OK button twice, then choose YES or NO.
<Delete All>: If you choose YES, all of the unprotected photos
/videos will be deleted.
<Protect>: If the files are protected, the LOCK icon will be shown
on the files. You can choose the function once again
to unprotect it. The protected files cannot be deleted
but can be formatted.
<AutoPlay>:The files will be played every 5 seconds.
<DPOF>: The icon DPOF will be shown on the files if you chose this
function.
DPOF: Digital Prints groups Format
7. OK:at “ZOOM IN” mode, press the button OK, press the buttons UP,
DOWN, LEFT and RIGHT to move the pictures vertically and
horizontally.
Play videos or display photos on TV
You can enjoy HD videos on the ordinary TV or HD TV.
1. Connect TV Out: under the preview mode, connecting AV cable, the
pictures/video will display on the TV’s screen.
2. Connect HDMI OUT: under the preview mode connecting HDMI cable,
the pictures/video will display on the screen of HD TV.
View the videos and photos on the computer
A simple but interesting step, enjoy it!
1.
Connecting the camera and computer with USB cable, you can
upload the videos or photos to the computer, editing them and
sharing them with your family and friends.
Tips:
☆ Make sure the video camera is power off before you plug the USB
cable.
☆ When the power is OFF, inserting a USB can recharge the video
camera.
☆ When the power is ON, connecting the camera to the computer, you
can copy the content in the memory card.
Specification
sensor
5.0 Mega CMOS SENSOR(2592×1944)
Lens Angle
150 degrees
Photo Resolution
3M(2048×1536)/5M(2560×1920)/8M(3200×2400)
Video Resolution
1080P(1920×1080)720P(1280×720) WVGA(848×480)QVGA(320×240)
frame Rate
1080P/30fps 720P/60fps WVGA/60fps QVGA/30fps
video Format
MOV(H.264 compression)
Photo Format
JPEG
Storage medium
Micro SD/MMC card(up to 32GB SDHC,high speed)
Storage capacity
(2GB micro SD card)
Photos:: 3M(1900) 5M(1160) 8M(770)
Video: H.264 1080p: about 40 minutes ; H.264 720p: about 60 minutes ;
WVGA: about 135 minutes
digital zoom
3x digital zoom(under 720p)
AV OUT
support NTSC/PAL analog video output & HDMI output, support analog audio
output
PC Port
USB2.0(USB’S FUCNTIONS)
Microphone
Built-in MIC、Speaker
power dissipation
400mA@3.7V(MAX)
lithium battery
1000mAh
Recording time
2.5 hours(one battery)
operation System
Windows XP SP2/Vista or Above/Mac OS
CPU
≥Pentium 4 1.5GHZ
RAM
≥1GB
RTC
support
storage temperature
-20℃–50℃
working temperature
-10℃—50℃
working humidity
15~85%RH
Trouble Shooting
Trouble
Reason
LCD
and
LED
Check the POWER
does
not
light
Switch
when power on
Check the battery
Solution
Make sure the Power Switch was slide to ON position.
1.Make sure the battery is installed correctly.
2 . Make sure the battery is full recharged before using.
To charge it with the power adapter.
LED light red,
Check the micro SD
1.If the micro SD card is damaged, the camera system
LCD does not
card
will not work.
display when
2 . Format the micro SD card
power on
computer. Then reinstall the micro SD card
with Card Reader on
to the
camera. If still not work, change it to high speed micro SD
card please.
Cannot record or
Check the micro SD
take photos
card
video or photo is
Format micro SD card in the camera
System Error
Restart the camera
Hand Shake or the
1 . When the light is not enough, the system will adjust
light is not enough
not clear
the light automatically. You should hold the camera for
longer time.
2 . Hold the camera firmly while recording for taking
photos. You are suggested to use Tripod.
Lens is dirty
Clean the lens with special paper.
The video or photo
You are suggested to set the video at HD 1080P mode
mode is not set
and 8M for photos.
properly
Buttons
response
no
System Error
Take out the battery, then reinstall to power on the camera
Remote Controller Simple Guide
Basic Operation:

“DC button” for camera

“Record” for video

“Stop” for stop.And the red indicator shows the work status. (Note: For
changing mode from Video to Camera, “Stop” button must be pressed
firstly.)

Press any key to wake up the camera in the standby mode.

Remote Distance: Max. 5 meters in all direction(in open area)

Waterproof Level: IP67, 1m under water
Accessory:
Belt:
When the cam does not response to the remote controller, how to
do?

1,When the camera is off, press the camera's "recording" button, at the
same time turn on the camera.

2,After the camera is on(hearing beep),release the "recording" button.

3,Make the camera and remote controller face to face.

4,Then press both the controller's "recording" and "stop" buttons for 3
seconds.

5,Press "DC" or "Record" button on the remote controller, the camera will
work.
Download PDF