Multi-Function Satellite Finder

4.3" Handheld
TFT LED
Multi-Function Monitor /
Satellite Finder (G)
Manual
Introduction:
Thanks for your purchasing Satellite finder. The Satellite finder with world
advanced technology: QPSK demodulator and MPEG-II decoder in full
compliance with the DVB-S standards, aslo can use ABS-S CBS-2 MPEG-4
signal buzzerautomatic and singnal display,with newest integrated circuit and
TFT,TFD liquid crystal display technology production , machines targeting a
high-performance, high-capacity lithium-polymer battery, the Satellite finder is
a collection of satellite television signal and AV signal reception, high
resolution LED display and with DC power supply directly one of the high-tech
electronic products. Built-in Satellite finder management;13V18V/22K/Signal
lock instruction; LNB Short-circuit protection . It is can be carried and used
outdoors. It is the absolutely necessarily for engineers during their installation
of the satellite television reception systems and monitoring equipment system.
To ensure the best use of unit, and long-term normal use, please read this
handbook carefully before using it.
ATTENTION:
■ There are no user-adjustable components, Do not remove the rear panel of
this product, only qualified technical personnel are permitted to perform
maintenance.
■ Do not let child within put anything into the unit, to avoid damage to
machinery.
■ Don’t expose this product to directly sunlight, heat or humid conditions.
■ Keep away from strong light ,ensure image effect and normal long-term
use.
■ Avoid heavy impact or drop on the ground.
■ Do not use chemical solutions to clean , Please use a clean soft cloth to
keep the brightness .
■ Use the power adapter attached .
■ Turn off this unit before you plug LNB cable.
1
CATALOG
I. FEATURE……………………………………………………………………………… 3
1.1 Front panel………………………………………………… .………………………3
1.2 Top/Side panel………………………………………....................…………………4
II Power supply…………………………………………….......................……….......……4
2.1 Built-in battery pack power supply: ………………………...................................…4
2.2 Home power adapter……………………………………...................................……4
2.3 Car power………………………………………………....................………………4
2.4 F fast line………………………………………….............................………………5
2.5 DC12V connections…………………………………........................………………5
2.6 BNC convert RCA…………………………………..........................………………5
III. Basic operation ……………………………………....................……………………… 5
3.1 receive satellite television signals ……………...................…………………….5
3.2 Adjust image station …………………………………………….………..……… 7
IV. For satellite operators …………………………………………………......................… 7
4.1 To catch satellite signals .………………………………………..................………7
4.2 Exact debugging ……………………………………… ....................……… 8
V. Receive audio and video signal ………………………………………......................…..8
VI. Menu Operation ……………………………………………………….......................…8
6.1 Prog list………………………………………………………......................….…8
6.1 A TV list………………………………………………….......................….….9
6.1 B Radio list……………………………………………… ................... ….…. 9
6.1 C Channel edit……………………………………………………...................…..9
6.1 D TV favorite list……………………………………………...................…..11
6.1 E Radio favorite list…………………………………………...................…..11
6.2 Dish setting………………………………………………….………........................12
6.2 A Add satellite …………………………………………………....................…….12
6.2 B Editsatellite ……………………………………………………...................….12
6.2 C Delete satellite ………………………………………………………..................13
6.2 D Auto scan ………………………………………………………......................13
6.2 E Blind search………………………………………………………….....................13
6.2 F TP scan………………………………………………………….....................13
6.3 System ………………………………………………………………….................14
6.3 A Language …………………………………………………………….................14
6.3 B Menu setting………………………………………………………….................. 14
6.3 C Lock control……………………………………………………...................14
6.3 D AV setting………………………………………………………….................14
6.3 E Time&timer…………………………………………………........................…15
6.3 F Rest to factory ………………………………………………….................……. 15
6.4Utility …………………………………………………………….......................….15
6.4 A upgrade………………………………………………………….................15
6.4 B Calendar………………………………………………………….................16
6. 4 C Ga m e … …… … … … … … … … … … … … … … … … … … .. . . . . . . . . . . . . . . . 1 6
VII. The main parameters ……………………………………………………................…16
VIII. Packing list ……………………………………………………………………....…...17
IX.The solution of the small trouble ……………………………....………...............17
2
I. Appearance
1.1 The front panel (as down figure)
1. LCD display:show images and other signals(4.3"LCD Screen).
2. PVC Protect:LCD screen protection
3. Power:the light is red when power is connected.
4. Charge: on charge, indicator lighting,flash will over.
5. LOCK:the light is green when signal is strong(sat).
6. 13V:the light is green when LNB output 13V.
7. 18V:the light is green when
LNB output 18V.
8. 22K:the light is green when
signal is Conversion by opening
22K.
9. Receiver window:receiver
remote control signal
10.F1:TV/Radio swicth key
11.F2:NTSC/PAL swicth
12.F3: Left/Right channel
/stereo conversion .
13.F4:Alarm:Signal locked
alarm on/off.
14.CH+: to turn up the channel
or move the cursor down.
15.CH-: to turn down the
channel or move the cursor
down.
16.VOL-:to turn down the
volume or move the cursor 1eft.
17.VOL+:to turn up the volume
or move the cursor right.
18.OK:confirm key.
19.INFO:enter to find satellite
status by clicking this key,it
shows signal strong, Signal
quality and other information of satellite signal on the screen.
Again INFO: article shows of singnal shape,with enlarge images
20.MENU:press this key to enter or exit the menu.
21.Exit ;
22.GOTO:directly into the satellite management functions.
23.SCAN:enter automatic search
24.AV/TV:TV/AV function switch
25.0-9:Number key
26. Model
3
1.2, Top/Side panel (as right figure)
1.LNB IN: the satellite signal input
socket.
2.Upgrade: software update socket please
use upgrade line we supply.
3.AV(3.5¤);Audio /Video input/output
4.Lamp:flashlight function
5.Flashlight:lamp switch
6.DC12V output: supply other equipment.
7.Trestle on behind the machine
8.Speaker.
9.Battery cover:Open the battery cover,
you can replace the built-in battery
10.M:Menu:brightness,contrast,color,hu
e, language,volume
11.+:to turn up, move the cursor right.
12.-:to turn down, move the cursor left.
13.DC Input: direct power supply
(DC13.5V) input .
14.power switch:“0”turn off the unit;
“Ⅰ”turn on the unit.
II.Power supply
2.1.Built-in battery pack power
supply: Internal 11.1V 2200mAh
high-performance lithium-polymer
battery. Turn on power switch, the battery
auto supply, the battery can work about
3-4 hours outdoor.on AV input status work about 15 hours. The
battery with intelligent protection circuit to
avoid the damage by over-recharge/over
-discharge or short-circuit. Please recharge the
battery with the attached power adapter, when
the power light is red.(change over about 4-5
hours, The battery charge and discharge to
two or three times to be at their best).
2.2 Home power adapter(as right figure)
Please use power adapter we supply, connect the power DC13.5V
at the side panel to charge.
2.3 Car power (as down figure)
4
Use the Car power supply connect to car cigarette lighter, this
moment the red light said already switch on the power, the output
will head into the machine side plate DC power input socket, this
machine can power supply or charge the in side battery.
2.6 AV line(as up figure)
¤3.5 AV port,converted into (yellow:video;red/white:audio).input
and output track
2.4 F fast line (as up figure)
A head of insert finder meter, a head of insert outdoor LNB,
more facility。
2.5 DC12V connections (as up figure)
External cameras or monitor, need to respond to provide DC12V
start camera or monitor, VIDEO output and input docking VIDEO
to directly from machine, machine start AV display function。
III. Basic operation
If you need to add satellite information onto our satellite finder,
please follow bellowing steps:
st
1 : Press button【MENU】, select “Add satellite”and press [OK],
setup satellite name, Local frequency, DisEqC and 22K according
to your LNB, DisEqC and 22K. Please refer to step “Add satellite”
on manual.
2nd: then enter "TP scan", find the satellite name you setup before
by pressing right/left key, then input TP Frequency, symbol rate
and type of polarization. Please refer
to step "Add channel" on manual.
3rd: Connect LNB well, adjust the
direction of antenna until finder
alarms, press "OK" key to search
programs.
3.1 Receive satellite television
signals:(as right figure)
Satellite TV signal parameters can
be adjusted through the buttons on the front panel .
Start: turn the power in the state “Ⅰ”, the LCD display will show
5
the informations and the TV signals.
When the first time to use the Satellite Finder, it will play the
first channel as the factory default setting.
If it isn’t the first time to use the Satellite Finder, it will play the
channel which played the last time before you turn Satellite Finder
off.
Frequently problems: I have turned my Satellite Finder on and
not in stand-by mode, there is no program played but displayed a
small ball or Bad Signal on the screen.
It is means you received that channel no signal, which may cause
by follow reasons:
a. You choose the channel not on the satellite which your antenna
has been chosen, the simple solution is to change channel.
b. If the signal quality is too bad. You can change to other
channel which has good signal quality. If you cannot solve this
problem at last, please contact with the nearby agency or other
professional man.
c. You used the twin-local frequency LNB, you need modified
local frequency setting of the Satellite Finder.
OK KEY:No menu displayed on the
screen. Press “OK” key, the channel
list and small picture will displayed on
the TV screen. This small picture used
for fast search the channels you have
stored in the satellite Finder. It
convenient for browse and choose.
Press ►,channels will page down.◄,
channels will page up.(as right figure)
VOLUME:When picture displayed in full screen, press ◄/►to
adjust volume of the Satellite Finder.
NUMBER:When picture displayed in full screen, press 0-9
number key to choose the channel you want, and then press OK
key, change to that channel faster.
INFO: Press INFO key when picture displayed in full screen, the
information window will appear on the screen to show some
information about current channel.
6
Again INFO: article shows of singnal shape,with enlarge images
TV/AV: Under TV mode, press TV/AV key can switch to AV
input mode.
3.2 Adjust image parameters:(as down figure)
press TV/AV the botton select
AV status With the three buttons on
the side panel to adjust image.
Press“M/+/-” enter the menu
Open satellite finder ,for the last
time on the default shutdown state, if
boot for TV, press the TV/AV
buttons, machine to AV state, need to
external Video camera/DVD and
other Video signals connected to the
machine top Video input (if external to head for BNC through
BNC turn head to put can convert RCA), Audio input can show,
such as external need DC12V power supply voltage DC, can be
directly through the DC turned 12 V DC line connecting the
output to other cameras or equipment.
Brightness: adjust the black-level of images to what you want.
Contrast: adjust the degree of discrepancy of the image.
Color: adjust level and the color tone of thr picture (the picture
reddish or green).
Hue: adjust imbalances in the color images.
Language: choose the following language from menu you want:
Chinese / English. the items need to adjust by “M”, the selected
option in red background, adjust by “+”/ “-”to meet your request,
press “OK” to confirm and exit set.
Volume:adjust audio size of AV
condition.
IV. Adjust satellite signal
4.1 To catch satellite signals(as
right figure)
Press "OK" on the front into the
TV ,press "MENU" into the name
of satellite.Press ◄/► key on the
7
front panel to choose the satellite, then press OK enter into the
relative item .press "INFO" can into catch satellite .as follow
picture, and the screen display satellite parameters and signal
strength ,signal quality etc.press "INFO" large signal quality,can
watch signal quality.
4.2 Exact debugging:
The Satellite Finder not receive digital programs only if you
adjust the antenna up to the value of signal quality not less than
30% and it is steady; following that exact adjust the installation
altitude of tuner to get the best focal distance. Continue to adjust
the azimuth up to the MAX value of signal strong degree and
signal quality.
Adjust the antenna to appear a chirp voice from machine, is that
to search the satellite signal, can press buttons “Alarm” button
can closed early warning signal, and then scrutinize LED data
shows, the most ideal viewing Angle fine-tuning to quality
V. Receive audio and video signal.
Press the button on the front panel “TV/AV”, the LCD
will show blue screen, AV Jack of rear panel can receive
audio and video signal, and
can be used for monitoring
equipment installation and
AV signal of broadcast.
VI.Menu operation
6.1 Prog list
Press the MENU on the front
panel to see (as Right Figure )on
8
the screen.
Press ◄/► key on the front can be
up and down to move the cursor in
every menu .
Press "OK" key into relevant and
operation TV channel.
6.1A. TV list(as up figure)
When you are in the Channel item,
press "OK" key into the channel.you can use ▲/▼ to choose TV
channel, Radio channel and Add channel.
a.Into the channel program:press ▲/▼can up and down
"AtoZ,AtoA,to add password.channel list (as down figure )
b. Into the channel search: you can choose the first letters
to find channel (as up figure)
c.Edit:in the channel list press”3”to change list(as up
figure)Display program information. And you can change
(Fre,Rate,Pol,VPIO,APIO,PPIO)
6.1B. Radio list:(as right figure)
The operations are same as TV
Channel.
Difference only is radio program in
the list, and on the right side of the
preview window does not have a
video images appear;and always
show the boot screen.
6.1C: channel edit (as down figure)
9
Enter into the menu of Channel.
Move cursor on the “Add Channel” by
press ▲/▼ ,and then press OK to
confirm. You can add channels under
this menu.
a.press"OK" into your channel
(as down figure)
Press▲/▼key move the cursor
Press◄/►key chose"Movies,Music,Cartoon,News,Sport,Adult”;
Press"OK"key can play like mark,return press "OK"cancel the
mark.
Press "MENU" to exit.
b.Move item (as down figure)
Press ▲/▼ key move the cursor
Press"OK" key play move mark,press"0" to move,and display
new interface to enter a new channel,move ▲/▼ confirmed
Press "MENU" is exit.
c.delete channel menu (as down figure)
Press ▲/▼ key move the cursor,choose your delete channel
Press "OK" key delete mark,return "OK" cancel
10
Press ◄/► page turning
Press "MENU" is exit.
Press "0" can delete all channel list
d.Item password (initial password0000) (as down figure)
Press ▲/▼ key move the cursor,chose your
item to password
Press "OK" key play the mark,return "OK"choosw to cancel
Press ◄/► page turning
Press "MENU" is chose channel,press
"MENU" is exit.
6.1D: TV favorite list(as right figure)
Into menu,as picture you can choose
your item
Press▲/▼move the cursor,the right
windows can preview favorite item.
6.1E: Radio favorite list(as right
figure)
Into menu.as picture you can choose
your favorite radio item.
Press ▲/▼ move the cursor,the right
windows can preview the open interface.
11
6.2 Dish setting:
Press ◄/► to select Satellite menu under the main menu, You
can choose Add Satellite, Edit Satellite, Delete Satellite, Auto
Scan ,Blind Scan,Tp Scan by press ▲/▼(as down figure)
6.2A. Add satellite (as up figure)
Move cursor on Add Satellite and OK. Operated following the
indications under this menu, for example, when the cursor on the
satellite, press “OK” or key “1” to enter into the create satellite’s
name statue, press ▲/▼, ◄/► move cursor to choose the number
and letters for the satellite name, then OK to confirm. Press
“menu” to save exit. It is the same for set the other parameters to
save and exit after finish setting.
6.2B. Edit satellite(as down figure)
Press▲/▼ to move cursor after enter into this menu. When the
cursor on the Edit satellite, press ◄/►to choose the satellite you
want to edit. Move the cursor on the “Positioner”, press ◄/► to
choose DiSEqC 1.2 and OK enter into DiSEqC 1.2 setting,
according to the indications to edit DiSEqC 1.2 displayed.
The other operations are same Add Satellite.
12
F
6.2C. Delete satellite (as right figure)
Enter into this menu, choose the satellites
you want to delete and press OK, the
satellites which you choose will be
marked with “×”, press OK again can
cancel the chosen. Press Menu to exit.
6.2D. Auto scan (as down figure)
Move cursor on Auto scan and OK to
confirm, Use ◄/► to select the satellite
you want to search, then select mode of
the channels you want (All, Free TV, All
TV). You can edit the parameters of the satellite which you
selected also. When you finished the editing, press OK to start
satellite auto scanning.
6.2E: Blind search (as down figure)
Choose Blind Search and OK to confirm, you can choose, add
or delete one blind of any satellite and modified the parameters,
then press OK to search channels on this TP.
6.2F:TP scan(as up figure)
Under this menu, you can search the satellite which
pre-installed in the Satellite Finder. There are also have three
13
search modes(All TV, Free and All) displayed.
6.3. System setting:(as right figure)
Use ◄/► select System under the main
menu, press ▲/▼ to choose Language, TV
System, Auto Shut Down, OSD Setting,
Default value Parent Lock .displayed.
6.3A.Language(as down figure)
Here the language means that you can
choose the language for menu display on the screen. Under the
System menu, press ▲/▼to move on Language and OK enter into
menu language. Using ◄/► chooses the language you need, OK
to confirm. Press Menu will back to System menu, the menu
interface will display the language which you currently chosen.
6.3 B.Menu setting(as up figure)
In the menu edit press"OK"into press▲/▼key move the cursor
Press◄/►key can change set,the color have four style;
Transparency has four leves;Brightness warm color and cool color
can use digital key into ;Press "MENU" is exit
6.3C Lock control(as up figure)
In lock edit press "OK" into edit;Ento your old password (0000)
can use menu lock and item lock switch, change the password .
Press▲/▼key to move cursor;press◄/►key to change the
set;press "MENU" is exit
6.3D AV setting(as down figure)
Into the video edit press "OK",press "◄/►"key move,have
automatic,PAL/NTSC three style.press "OK/MENU"confirmed
14
choose exit.press "EXIT"not change exit.
6.3E Time& timer(as up figure)
press "OK" into time set.you can chose GMF AND DST
switch,aslo can ento your close time .as a hour :060.press"MENU"
is exit."OK" confirmed store exit. Can set standard time and
daylight saving time .
6.3F Reset to factory (as up figure)
Into the factory default press "OK" to interface .
Chose confirmed ,please input the (0000) password. Chose
"cancel" cancel operation.
6.4 Utility(as down figure)
in the menu press◄/►into tool set.can choose software
upgraded,calendar,Russian square,Pushed box
6.4A: Software upgrade: (as down figure)
in the software upgrade press "OK" into upgrade,you can see the
interface
Press◄/►key change upgrade style, style have "all,code,user
data,the boot screen " four style upgrade.
Move cursor press "Ok" key start upgrade.
Press "MENU" key is exit.
15
6.4B: Calendar(as up figure)
6.4 C/D/E/G:Game(Snake/Tetris/Gobang/Sokoban)(as up figure)
VII. The main parameters
Video decode
ISO/IEC
13818-ZMP @ML
NTSC/PAL
A/V output/input Audio RCA channel
Input
impedance
75 Ω (F type)
Input frequency 950~2150MHZ
Input signal
level
-65~-25dBm
LNB switch
22KHz
Display screen
LNB power
DiSEqC
TFT LED 4.3"
(480*272)
391680 pixels
13/18V,max400mA
1.0 or1.2 edition
EB/O Threshold
Demodulation
chip
QPSK(SCPC
and
MCPC compatible)
Symbol rate
System
processor
32bit
processor(200MHz)
SDRAM
FLASH
8Mbyte
Video
Satellite
Signal/Video
DVB-S
Satellite Signal
Test
Sampling rate
32,44.1 and 48KHz
Battery
11.1V2200mAh
output voltage 12 V
Size
212*123*48mm
16Mbyte
MPEG-2 Main
Level
ABS-S/CBS-2/
DVB-S2 Signal
Display&Alarm
Image
analysis
720*576,720*480
Audio decode
ISO/IEC
13818-3Layerl & 2
Input voltage
DC13.5V 1.5A
Weight
16
4.5dB
2-45MbaudsMCP
C, SCPC
Compatible
540g(with battery)
VIII. Packing list
■ Satellite finder
■ DC13.5V, 1500mA power adapter
■ RF direct head (on machine)
■ Bag
■ AV line(¤3.5)
■ Car power
■ F fast line
■ DC12V connections line
■ Use of a manual
■ Remote
IX. The solution of the small trouble
Problems
Reasons
No
picture 1. Check power adapter 13.5V
and
sound Output or connection
after
the 2.battery is lack of power
power is on
Antenna installation error
“No satellite Not connected with LNB input
signal”
displayed,
Launch station is closed
When
you
changed
Over strong of interference
channel
Polarized error
1 piece
1 piece
1 piece
1 piece
1 piece
1 piece
1 piece
1 piece
1 piece
1 piece(optional)
Solution
1. Check power input
2. Take charge of battery.
Readjusting antenna
Connect LNB well
Confirm signal exist and try
again
Try again after a while
Reselect LNB polarized in the
polarized control
Reconnection refer to
System connection
Set the TV to video station
The cable connection with TV
No picture in is error
the TV Screen
TV was not be set in video
Compounding Be used to using single audio
something satellite and the
with
noise on
other audio is used to using in Select left audio output
and radio
radio
17
Download PDF