nal
o
i
t
n
on
nveg Opti
o
C n
P25runki
w/T
P25 Conventional & Trunking Features
P25 Conventional and Trunking
The IC-F9511 series offers both analog conventional and P25
digital conventional operation with a P25 trunking option You can
assign individual channels to analog conventional, P25 conventional or P25 trunking, all within one radio using digital/analog
mixed mode operation.
Interoperability
The IC-F9511 series conforms to the standard specifications for
TIA/EIA TSB-102, CAAB, Digital C4FM Transceiver Performance
Recommendations and provides interoperability with other brand
P25 equipment for public safety applications. The IC-9511 series
is also P25 CAP compliant.
Individual ID and talkgroup ID
The IC-F9511 series has a 100 individual ID and 250 talkgroup
ID memories. Use the display to visually select the person or
group you’re going to call.
Detachable controller (front panel)
With the optional remote control kit, RMK-2
and separation cable, the front panel controller of the radio can be detached from
the main unit. It allows flexible installation
in limited vehicle space. Separation cable
length is selectable from 1.9m (6.2ft), 3m
(9.8ft), 5m (16.4ft) and 8m (26.2ft).
Dot matrix, multi-function LCD
With a high contrast dot matrix display,
upper and lower case characters can be
easily distinguished. The display shows 12
characters by 2 lines. LCD backlight is
standard.
Internal clock setting example
IP54 dust-protection and splash
resistance (Controller only)
The rugged front controller panel is resistant to shock and vibration. When used with
the optional separation kit, RMK-2, the
controller head has dust-protection and
splash resistance, equivalent to IP54.
Vote Scan
The conventional voting mode scan detects the signal strength level of repeater
stations and automatically selects the
strongest station, useful for roaming between 2 or more repeater sites. Once you
program the voting mode to a memory
zone, you can easily start voting mode operation by changing the zone setting.
Optional AES/DES encryption
AES and DES encryption keeps conversations secure with the
optional AES/DES or DES encryption unit. An optional FIPS AES
board is certified to FIPS 140-2.
OTAR (Over-the-Air-Rekeying)
The IC-F9511 series supports P25 OTAR and trunked OTAR for
changing encryption keys over the air.
Enhanced vocoder ready
Uses the DVSI's AMB+2™ vocoder.
ATG (Announcement talkback group)
Call a large group of groups on a trunking network. Dispatcher
can hear replies when radios respond to an announcement
group call.
ESN programming
Save ESN's in a cloning file to only allow approved radios on
trunking systems.
512 memory channels, 128 zones
Up to 512 memory channels can be divided into 128 memory zones, allowing
you flexible channel and communication
group management.
ACC connector for connecting external
devices. It has reserved pins for programming to input operating channels, turn on/
off functions and output received audio or
honk a horn, etc. In addition, an ignition
sensing line allows you to control the radio
Tactical group function
The tactical group function allows you to
copy memory channels to the tactical zone
and temporarily regroup memory channels. Using the optional zone copy cable,
memory channels in the tactical zone can
be transferred from a master radio to other
radios.
Abundant scanning functions
The dual priority scan monitors two primary channels alternately, while scanning
other channels. The mode dependent
scan function automatically changes the
scan list according to the operating channel setting. The talk back function with
timer beep, TX channel and cancel channel settings allow you to preset the transmission channel when you push the PTT
button during a scanning operation or
cancel the scanning.
22W amp for Public address
(PA) and RX speaker functions
The IC-F9511 series has a built-in 22W
BTL audio amplifier. When an external loud
speaker is connected to the radio, you can
speak through the radio’s microphone. The
RX speaker function allows you to relay the
received audio over the loud speaker.
Programmable accessory connector
The IC-F9511 series has a D-SUB 25-pin
power from the engine ignition switch.
Radio stun/kill and Power-on
password function
The radio stun/kill function* disables a lost
or stolen radio over the air, eliminating security threats from undesired listeners. The
power-on password prevents unauthorized
people from turning on the radio.
* P25 digital mode only.
Other features
• Dual Head option with IA-DH1095
• FM wide/narrow channel spacing*1
• Built-in audio compander*1
• Built-in inversion type voice scrambler*1
• Self-ground microphone, HM-148G
• Talk around function
• CTCSS and DTCS encoder and decoder*1
• DTMF autodial*1
• Microphone hanger action (On hook scan
and off hook monitor)
• 2-Tone encoder and decoder*1 and MDC
1200 compatible*1
VHF & UHF P25 CONVENTIONAL & TRUNKED TRANSCEIVERS
SPECIFICATIONS
IC-F9511T/S
IC-F9511T/S
IC-F9521T/S
RECEIVER
SensitivityAnalog
GENERAL
Frequency coverage
400–470MHz
450–512MHz
Max. 512 Ch/ 128 zones
16K0F3E*, 11K0F3E, 8K10F1E, 8K10F1D
12.5/25, 15/30kHz*
2.5/3.125kHz
13.6V DC
136–174MHz
Number of channels
Type of emission
Channel spacing
PLL channel step
Power supply requirement
Current drain (approx.)
Tx 50W
Rx Max. audio/Standby
Antenna impedance
Operating temperature range
Dimensions (W×H×D)
(Projections not included)
Weight (approx.)
SP-35
TRANSMITTER
Output power (at 13.6V DC)
Max. frequency deviation
Digital
Frequency stability
Spurious emissions
FM Hum and noise
Audio harmonic distortion
Ext. microphone impedance
0.25µV typ. (at 12dB SINAD)
0.25µV typ. (at 5% BER)
79*2/53dB typ. (Wide/
Digital
Adjacent channelAnalog*1
selectivity Digital
Spurious response
Intermodulation
Hum and noiseAnalog
11.0A
14.0A
1000mA/350mA
1000mA/350mA
50Ω (SO-239)
–30°C to +60°C; –22˚F to +140˚F
Digital
Audio output power
External audio (D-sub)
Ext. speaker connector
175×45×170mm; 6.89 ×1.77 ×6.69 in
IC-F9521T/S
81/53dB typ. (Wide/Narrow)
63dB typ.
Narrow)
63dB typ.
70dB*3 min.
85dB min.
78dB typ.
55/51dB typ. (Wide/Narrow) 50/45dB typ. (Wide/Narrow)
52dB typ.
52dB typ.
4W typ. (at 10% distortion, 4Ω load)
22W typ. (at 10% distortion, 4Ω load)
2-conductor 3.5 (d) mm (1⁄8″)/4Ω
*1 TIA/EIA603B *2 81dB typ. (406.1–420MHz), *3 85dB typ. (406.1–420MHz)
Measurements made in accordance with TIA-102 (Digital), TIA-603B (Wide/narrow). All stated specifications are subject to change without notice or obligation.
1.5kg; 3.3lb
320g; 11.3oz
* 25kHz bandwidth is no longer available for FCC Part 90 licensees for USA versions. Ask your dealer if you need
25kHz bandwidth.
50W, 25W, 5W (Hi, L2, L1)
±5.0kHz/±2.5kHz (Wide/Narrow)
Max. pattern ±2.85kHz, Minimum pattern ±0.95kHz
±1.0ppm
70dB min.
48/45dB typ. (Wide/Narrow) 48/43dB typ. (Wide/Narrow)
1% typ. (40% deviation)
600Ω (8-pin modular)
Applicable U.S. Military Specifications
Standard
Low Pressure
High Temperature
Low Temperature
Temperature Shock
Solar Radiation
Humidity
Settling Dust
Vibration
Shock
Also meets equivalent MIL-STD-810-C, -D and -E.
Supplied Accessories
* For IC-F9511T/F9521T only.
• Hand microphone, HM-148G • DC power cable
• Mounting bracket kit
• Microphone hanger
• External speaker, SP-35* • Key assign stickers
Ingress Protection Standard
Dust & Water
Method
500.4
501.4
502.4
503.4
505.4
507.4
510.4
514.5
516.5
MIL 810 F
Procedure
I, II
I, II
I, II
I
I
–
I
I
I, IV
IP54* (Dust-protection and water resistant)
* IP54 tests were performed on the controller and RMK-2 only.
OPTIONS
Some options may not be available in some countries. Please ask your dealer for details.
SEPARATION CABLES
SEPARATION KIT
RMK-2
Use with one of the following
separation cables.
DESKTOP MICROPHONE
OPC-609
1.9m; 6.2ft
OPC-607
3m; 9.8ft
OPC-726
5m; 16.4ft
EXTERNAL SPEAKERS
SP-30
20W rated input
SM-26
HAND MICROPHONES
OPC-608
8m; 26.2ft
HM-152
HM-152T
DTMF microphone
ZONE COPY CABLES
INTERNAL UNITS
SP-35: 2m cable
SP-35L: 6m cable
UT-125
AES/DES
ENCRYPTION
UNIT
HM-148T
Heavy duty microphone
with DTMF keypad
HM-148G
Heavy duty
microphone
UT-125 FIPS
AES/DES
ENCRYPTION
UNIT (FIPS version)
UT-128
DES
ENCRYPTION
UNIT
OPC-1532
Mobile to mobile cable
OPC-1871
Mobile to handheld
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in the United States, the United Kingdom, Germany, France, Spain, Russia, Japan and/or other countries.
AMBE+2 is a trademark and property of Digital Voice Systems Inc. TM: A Certification Mark of NIST, which does not imply product endorsement by NIST, the U.S. or Canadian Governments.
All other trademarks are the properties of their respective holders.
1-1-32, Kami-minami, Hirano-Ku, Osaka 547-0003, Japan Phone: +81 (06) 6793 5302
Fax: +81 (06) 6793 0013
www.icom.co.jp/world
12421 Willows Road NE,
Kirkland, WA 98034, U.S.A.
Phone: +1 (425) 454-8155
Fax:
+1 (425) 454-1509
E-mail: sales@icomamerica.com
URL: http://www.icomamerica.com
Communication Equipment
Auf der Krautweide 24
65812 Bad Soden am Taunus, Germany
Phone: +49 (6196) 76685-0
Fax:
+49 (6196) 76685-50
E-mail: info@icomeurope.com
URL: http://www.icomeurope.com
Zac de la Plaine,
1 Rue Brindejonc des Moulinais, BP 45804,
31505 Toulouse Cedex 5, France
Phone: +33 (5) 61 36 03 03
Fax:
+33 (5) 61 36 03 00
E-mail: icom@icom-france.com
URL: http://www.icom-france.com
6F No. 68, Sec. 1 Cheng-Teh Road,
Taipei, Taiwan, R.O.C.
Phone: +886 (02) 2559 1899
Fax:
+886 (02) 2559 1874
E-mail: sales@asia-icom.com
URL: http://www.asia-icom.com
Glenwood Centre #150-6165
Highway 17A, Delta, B.C.,
V4K 5B8, Canada
Phone: +1 (604) 952-4266
Fax:
+1 (604) 952-0090
E-mail: info@icomcanada.com
URL: http://www.icomcanada.com
Ctra. Rubi, No. 88 "Edificio Can Castanyer"
Bajos A 08174, Sant Cugat del Valles,
Barcelona, Spain
Phone: +34 (93) 590 26 70
Fax:
+34 (93) 589 04 46
E-mail: icom@icomspain.com
URL: http://www.icomspain.com
Unit 1 / 103 Garden Road,
Clayton, VIC 3168 Australia
Phone: +61 (03) 9549 7500
Fax:
+61 (03) 9549 7505
E-mail: sales@icom.net.au
URL: http://www.icom.net.au
No.101, Building 9, Caifuxingyuan Park,
No.188 Maoting Road, Chedun Town,
Songjiang District, Shanghai, 201611, China
Phone: +86 (021) 6153 2768
Fax:
+86 (021) 5765 9987
E-mail: bjicom@bjicom.com
URL: http://www.bjicom.com
Rua Itororó, 444 Padre Eustáquio
Belo Horizonte MG,
CEP: 30720-450, Brazil
Phone: +55 (31) 3582 8847
Fax:
+55 (31) 3582 8987
E-mail: sales@icombrazil.com
Blacksole House, Altira Park,
Herne Bay, Kent, CT6 6GZ, U.K.
Phone: +44 (0) 1227 741741
Fax:
+44 (0) 1227 741742
E-mail: info@icomuk.co.uk
URL: http://www.icomuk.co.uk
39C Rennie Drive, Airport Oaks,
Auckland, New Zealand
Phone: +64 (09) 274 4062
Fax:
+64 (09) 274 4708
E-mail: inquiries@icom.co.nz
URL: http://www.icom.co.nz
Count on us!
Your local distributor/dealer:
08ED029D* © 2008–2013 Icom Inc.
Printed in Japan
Download PDF