OUTDOOR HOUSING
PIH - 510 H/L
INSTALLION / OPERATION MANUAL
IMPORTANT SAFEGUARDS
1. Read Instructions
All the safety and operating instructions should be read before the unit is operated.
2. Retain Instructions
The safety and operating instructions should be retained for future reference.
3. Head Warnings
All warnings on the unit and in the operating instructions should be adhered to.
4. Follow Instructions
All operating and user instructions should be followed.
5. Electrical Connections
Only a qualified electrician should make electrical connections.
6. Attachments
Do not use attachments not recommended by the product manufacturer as they may cause hazards.
7. Cable Runs
All cable runs must be within permissible distance.
8. Mounting
This unit must be properly and securely mounted to a supporting structure capable of sustaining the weight
of the unit.
SAFETY PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT OPEN COVER.
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the unit.
UNPACKING
Unpack carefully. Electronic components can be damaged if improperly handled or dropped. If an item appears
to have been damaged in shipment, replace it properly in its carton and notify the shipper.
Be sure to save:
1. The shipping carton and packaging material. They are the safest material in which to make future shipments
of the equipment.
2. This Installation and Operating Instruction.
SERVICE
If the unit ever needs repair service, the customer should contact our dealer or branch for authorization to
return and shipping instructions.
Separate The Housing and PSU Box
Untighten the screws
from PSU box
Untighten and pull out
the bolt from the hinge
Separate the housing
and PSU box
Install Power Supply Unit
When use 24Vac power source:
Put the PSU into the
box
Tighten 2 screws to
fix the PSU
When use 90~260Vac power source:
Put PSU into the box
Put the clamp on PSU
Tighten 2 screws to
fix the PSU
Install the Power Box
Drill 4 holes on desired
locations
Tighten 4 screws to fix the power box
(These four screws are not supplied.
User must prepare their own screws.)
Connection
GND
NO
NC
COM
6
5
4
3
2
1
GND
TXDOTXDO+
TXDITXDI+
Connect AC / DC cables:
Untighten the left
knob, put the AC
power cable through
the hole and tighten
the knob
Connect the AC
power cable to AC
Input jack
Connect the AC
power cable(below)
to AC Output jack
Connect the DC
power cable(above)
to DC Input jack
Connect Alarm, telemetry control (RS-485) and Video cables:
Untighten the right
knob, put the Alarm,
RS-485 and video
cables through the
hole and tighten the
knob
Connect the
telemetry control
(RS-485) to RS-485
Input
(TXDI+,TXDI-)
Connect the Alarm
input cable to Alarm
Input
(Alarm 1 & GND)
Connect the video
cable to output jack
Attach the Base to Housing
Turn the dome cover
anti-clockwise
Separate the dome
cover from camera
Untighten the 3
screws from base
Turn the camera body
anti-clockwise
Separate the camera
body and base
Unplug the
connection cable
Attach the base to
housing
Connect the housing
cable
Tighten 3 screws to
fix base
Camera Setting
Setting Fast Dome ID
Setting Alarm Mode
Setting Camera Function
Setting Fan Power
Refer to FastDome operation manual for camera setting
Attach Camera Body and Base
Reconnect the
connection cable
Attach camera body
to base
Turn camera body
clockwise to high
position
Tighten the three
screws to fix the
camera body
Install The Dome Cover and Housing Cover
Attach the dome
cover to camera
Turn the dome cover
clockwise to tight
position
Attach the cover to
housing
Tighten the 3 screws
to fix the cover
Attach PSU and Bracket
Attach the housing
back to PSU box
Insert the bolt into
the hinge and tighten
Connection Between Housing and FastDome
Connect the fan &
heater cable to pin
jack
Connect the Fast
Dome cable to
connection jack
Install the Power Box, Bracket and Housing
PIH-510 H
Attach the bracket
and housing to the box
Tighten the 4 screws
to fix the bracket
Attach the bracket
and housing to the box
Tighten the 4 screws
to fix the bracket
PIH-510 L
Structural Drawing
PIH-510 H
274.0mm
70.0mm
477.5mm
270.0mm
PIH-510 L
70.0mm
204.0mm
367.15mm
312.5mm
270.0mm
405.0mm
Wiring Diagram
Connect to
Heater and Fan
DC12V
OUT
SWITCH POWER
AC90~260V
or
SWITCH POWER
AC24V
Connect to
FastDome
LINE
NEUTRAL
DC12V
IN
TXDI+
TXDITXDO+
TXDOGND
ALARM
IN
GND
AC-OUT
GND
ALARM
OUT
NEUTRAL
1
2
3
4
5
6
COM
NC
NO
GND
AC-IN
AC24V
LINE
NEUTRAL
GND
LINE
AC-IN
24Vac
VIDEO
OUT
TO
NEXT
FastDome
TO
Keyboard
Specification
OUTDOOR HOUSING
PIH-510 H
PIH-510 L
Wall Mounting
Pendant
Brocket
Aluminum
Top
Flame Resistant ABS
Construction
Internal Fixing
Steel
Housing
Polycarbonate
Input Voltage
DC12V
Connection Current Consumption 700mA (Fan + Heater)
PCB
RS-485
RS-485 In (2 inputs) RS-485 Out (2 outputs)
Alarm
Alarm-In (6 inputs) Alarm-Out (3 outputs)
On +15 C
OFF +25 C
Heater Activation
Fan Activation
On +35 C
OFF +25 C
270mm( f ) x 297.5mm(H)
Dimension
Weight
4.8Kg
5Kg
Model No.
Type
DISTRIBUTOR:
PLP-510CSE-1
Download PDF