Pre-Configured Industrial Distribution Frame (IDF)
SPECIFICATION SHEET
specifications
Rack mount Ethernet switches shall be deployed and protected
with an industrial distribution frame (IDF) enclosure which meets
UL 508A, UL Type 4/12 and IP66. The IDF shall be thermally and
spatially validated for use in environments up to 50°C. There shall
be a wall mount option with secure front and rear switch access.
The IDF shall accommodate two distribution layer switches and
up to three access layer switches with UPS for commonly used
copper and fiber based deployments. Optimized power cables,
receptacles and grounding shall be pre-installed in the enclosure. A
standardized, pre-configured equipment and accessory layout shall
be included.
Pre-Configured IDF
Wall mount
frame enclosure:
ZDF48-RA
Panduit Products, Ordered Separately
Small diameter,
48 patch cords
(order qty. 2)^: UTP28SP8INBU-48
Mini-Com ® Modules,
Cat 6, RJ45
(order qty. 96)^: CJ688TGBU
technical information
Cat 6 UTP Copper
Cable, riser: PUR6004BU-UY
Standards:
LC Opticom
OM3/OM4 FAP: FAP12WAQDLCZ
UL 508A Standard for Industrial Control Panels, cUL Listed per CSA, UL Type 4/12
and IP66 Rated
Dimensions:
48.54"H x 23.62"W x 29.95"D (1233mm x 600mm x 761mm)
Mounting:
Wall mount
Capacity:
26 Rack Units , (5) 1U switches and (1) 2U UPS, 96 incoming copper cables
(expandable to 144), 72 strands fiber or 36 fiber duplex ports (expandable to 72-ports)
Maximum load rating of 350 lbs. (158.8kg)
Color and material:
RAL7035 light-gray polyester powder paint; door and backplane made of 16 gauge
cold roll steel, center and wall sections made of 14 gauge cold roll steel
Thermal analysis:
Validated to 50°C with recommended AC unit
Included with IDF:
Pre-Installed:
(1) Square hole front and rear rack angles, (1) FRME1U fiber enclosure,
(2) CPPL48WBLY 48-port patch panel, (2) CMPHF1 cable management, (1)
RGRB19CN grounding bar, (3) equipment ground whips, (1)10” DIN Rail, (2) fiber
spools, (2) back panels, (2) ESD ports, 30” length of duct, (2) duplex, power
receptacles, cage nuts, labeling for cable routing, strain relief bars, (4) power cables
Included Accessories:
(1) ESD wrist strap, (1) HLS-15R0 hook and loop, (1) RGCBNJ660P22 #6 AWG
grounding cable, mounting hardware, conduit schedule and ingress template,
installation guide
key features and benefits
Pre-Configuration:
Reduces time required for planning, designing, procurement, and installation
resulting in 25% faster implementation
Defined equipment
locations and
cable routings:
Incorporate Panduit developed best practices in connectivity, cable
management, wiring, and grounding to ensure network reliability
Detailed
installation guide:
Provides easy, repeatable design instructions assuring consistency and
saving time on the job-site
Thermally validated:
Panduit Laboratories tested the thermal performance with recommended AC
unit and verified the ambient limitations to 50°C with the specified
network equipment; additional back end space allows for 3X the cooling
capacity over typical deployments for increased reliability
Key-locking handle:
Limits access to authorized personnel for a secure network
The IDF wall mount enclosure protects switches,
both physically and thermally in harsh industrial
environments. It is designed around the use of
popular fiber based Cisco* 3750X and copper
based Cisco* 2960S switch deployments.
*Cisco is a registered trademark of Cisco Technology Inc.
^Quantities given for (2) 2960S switches. A 3rd switch may require more connectivity.
+For RUs 1-14 order 2M patch cord FX2ERLNLNSNM002 and for RUs 15-26 order 1M patch cord FX2ERLNLNSNM001.
w w w . pa n d u it.c o m
Opti-Core ® Fiber
Optic Patch Cords,
LC to LC MM,
duplex+: FX2ERLNLNSNM001
FX2ERLNLNSNM002
Opti-Core ® OM3
Fiber Optic
Distribution Cable,
MM, riser: FODRX24Y
LC OptiCam®
OM3/OM4 Duplex
Fiber Optic
Connectors: FLCDMCXAQY
Panduit Products for 3rd Cisco* 2960S
Switch, Ordered Separately
Mini-Com® Modular
Patch Panel
Strain Relief Bar
48-port, 2 RU: CPPL48WBLY
Strain Relief Bar
7" Multi-Depth: SRB19MDBL
Strain Relief Bar
Extended 2": SRB19BLY
Strain Relief Bar
Straight: SRBS19BL-XY
Vertical Cable Manager 2" Wide,
Short (order qty. 2): CMVDR2S
StructuredGround ™
Bonding Cage Nuts and Screws
Green, #12-24: CNB4K
Cage Nut and Screws #12-24:
CNWS1224-C
Other Equipment, Ordered Separately
Pentair AC Unit:
N280416G100
Cisco* Switches
(order qty. 2):
3750X
Cisco* Switches
(order qty. 2-3):
2960S
2U UPS up to 1500W
applications
The Panduit Pre-Configured IDF is engineered to
deploy and protect 19” rack mount switches on the
factory floor in an industrial network. Consistent
design and equipment placement is offered to
reduce engineering and deployment time.
®
Pre-Configured Industrial Distribution Frame (IDF)
IDF elevation recommendation
STACK 1
STACK 2
STACK 1
STACK 2
!
DC INPUTS FOR REMOTE
POWER SUPPLY
SPECIFIED IN MANUAL
+12V
@7.5A.
!
DC INPUTS FOR REMOTE
POWER SUPPLY
SPECIFIED IN MANUAL
+12V
@7.5A.
RATING
CONSOLE
100-240V~
5.0A-2.5A, 50-60Hz
CONSOLE
100-240V~
5.0A-2.5A, 50-60Hz
RATING
RU 25-26 RU 24 RU 23 RU 22 RU 21 RU 20 RU 19 RU 18 RU 17 RU 15-16 RU 12-14 Open
Panduit RGRB19CN Ground Bar
Panduit FRME1U Fiber Enclosure
Open (Additional FRME1U If Required)
Customer Switch with 12-Fiber LS NICs – “B”
Panduit CMPHF1 Horizontal Cable Manager
Customer Switch with 12-Fiber LS NICs– “A”
Panduit CMPHF1 Horizontal Cable Manager
Optional Customer Switch – “C”
Optional Panduit CPP48WBLY 48-Port
Copper Patch Panel
Open
RU 11 RU 9-10 Customer Switch – “B”
Panduit CPP48WBLY 48-Port Copper Patch Panel
RU 8 RU 7 RU 5-6 Open
Customer Switch – “A”
Panduit CPP48WBLY 48-Port Copper Patch Panel
RU 4 Panduit SRBBRWC-KIT Strain Relief Bar
RU 2-3 RU 1 Customer UPS
Open
USB PORT
I
Smart-UPS
Test
1 0 0 0
O
OVERLOAD
PROTECTOR
UNINTERRUPTIBLE POWER SUPPLY
INPUT
PUSH TO
RESET
w ww . apcc. com
SENSITIVITY
Front View
OUTPUT 120V 50/60 Hz
Rear View
IDF operating range with air conditioner
Recommended Air Conditioning depending on Factory Floor Ambient Temperature and Electronic/Heat Load of
Network Equipment:
Impact of N280416G100* Air Conditioner on Maximum Allowable Ambient Temperature in Factory
No Air Conditioner
Layout
N28* Air Conditioner Installed
Rating (C°)
Rating (C°)
UPS
No UPS
UPS
No UPS
(2) 3750X and (3) 2960S
20
25
(2) 3750X and (3) 2960S
Layout
50
52
(2) 3750X and (2) 2960S
25
30
(2) 3750X and (2) 2960S
50
52
(2) 3750X and (1) 2960S
25
30
(2) 3750X and (1) 2960S
52
52
(2) 3750X
30
35
(2) 3750X
52
52
(1) 3750X and (1) 2960S
30
35
(1) 3750X and (1) 2960S
52
52
(1) 3750X
35
40
(1) 3750X
52
52
*Purchased separately from Pentair.
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
PANDUIT CANADA
Markham, Ontario
Phone: 800.777.3300
PANDUIT EUROPE LTD.
London, UK
Phone: 44.20.8601.7200
PANDUIT SINGAPORE PTE. LTD.
Republic of Singapore
Phone: 65.6305.7575
PANDUIT JAPAN
Tokyo, Japan
Phone: 81.3.6863.6000
PANDUIT LATIN AMERICA
Guadalajara, Mexico
Phone: 52.33.3777.6000
PANDUIT AUSTRALIA PTY. LTD.
Victoria, Australia
Phone: 61.3.9794.9020
For a copy of Panduit product warranties, log on to www.panduit.com/warranty
Visit us at www.panduit.com/ia
iai@panduit.com
©2015 Panduit Corp.
ALL RIGHTS RESERVED.
ZCSP18--WW-ENG
12/2015
Download PDF