specifications - BottleFillingStations.com

Buy at
| 855-558-9600 | BottleFillingStations.com
EZH2O® Bottle Filling Station
With Bi-Level Mechanically-Activated Water Cooler
SPECIFICATIONS
Models EMABFTL8WS and EMABFTLDDWS
RATED FOR INDOOR USE ONLY
PRODUCT SPECIFICATION
Self-contained, wall hung refrigerated water cooler with bottle filling station.
EMABFTL8WS shall deliver 8 GPH of 50°F drinking water at 90°F ambient
and 80°F inlet water. EMABFTLDDWS shall deliver non-chilled drinking water.
Lower units shall have mechanically-activated pushbar operation. Bottle
filling unit shall include an electronic sensor for touchless activation with auto
20-second shut-off timer. Shall include Green Ticker™ displaying count of
plastic bottles saved from waste. Bottle filler shall provide 1.1-1.5 gpm flow rate
with laminar flow to minimize splashing. Shall include integrated silver ion
anti-microbial protection in key areas. Unit shall meet ADA guidelines. Unit
shall be lead-free design which is certified to NSF/ANSI 61 and 372 and meets
Federal and State low-lead requirements. Unit shall be certified to
UL399 and CAN/CSA 22.2 No. 120.
EMABFTL8WSLK or
EMABFTLDDWSLK
STANDARD FEATURES
• Sanitary, touchless activation with auto 20-second shut-off (Bottle Fillter)
• Self-closing, mechanically-activated front and side pushbar controls (Cooler)
• Designed for installations where activation of the cooler is needed even
during power disruptions
• Integrated Silver Ion Anti-microbial Protection in key areas
• Quick Fill Rate: 1.1 gpm (EMABFTL8WS); 1.5 gpm (EMABFTLDDWS)
• Laminar Flow provides minimal splash
• Real Drain System eliminates standing water
• Visual User Interface display includes:
• Innovative Green Ticker™ counts bottles saved from waste
• Available with Flexi-Guard® Safety Bubbler
• Cooler panel finishes: Light Gray Granite Vinyl Clad Steel or Stainless Steel
COOLING SYSTEM (Model EMABFTL8WS only)
• Compressor: hermetically-sealed, reciprocating type, single phase.
Sealed-in lifetime lubrication.
• Condenser: Fan cooled, copper tube with aluminum fins. Fan motor is
permanently lubricated.
• Cooling Unit: Combination tube-tank type. Self-cleansing. Continuous
copper tubing with stainless steel tank. Fully insulated with EPS foam which
meets UL requirements for self-extinguishing material.
• Refrigerant Control: Refrigerant R134a is controlled by accurately calibrated
capillary tube.
• Temperature Control: Easily accessible enclosed adjustable thermostat is
factory preset. Requires no adjustment other than for altitude requirements.
CAPACITIES CHART
Model
EMABFTL8WS*
EMABFTLDDWS*
CONSTRUCTION
• Stainless Steel basin with integral drain and embossed
bubbler pad
• Galvanized structural steel cooler chassis provides
structural integrity
• Cooler cabinet available as Light Gray Granite
Vinyl Clad Steel or Stainless Steel (additionalcost)
construction
• Flexi-Guard® Safety Bubbler utilizes an infused
anti-microbial pliable polyester elastomer to prevent
accidental mouth injuries. Flexes on impact.
CERTIFICATIONS / STANDARDS
Voltage / Hertz
Chilling**
Capacity
F.L.
Amps
Rated
Watts
Approx.
Ship
Weight.
115V / 60Hz
8 GPH
4.0
370
75
-
-
1.0
15
40
• ADA Compliant
• UL399 and CAN/CSA 22.2 No. 120 Certified
• ANSI/NSF 61 and 372 Certified
• GreenSpec® Listed
*Color code of (L) Light Gray Granite or (S) Stainless Steel cooler panels.
**Based on 80°F inlet water & 90°F ambient air temp for 50°F chilled drinking water.
Warranty: 5 year limited warranty on the unit’s refrigeration system.
Electrical components and water system are warranted for 12 months
from date of installation or 18 months from factory shipment, whichever date
falls first.
In keeping with our policy of continuing product
improvement, Elkay reserves the right to change
specification without notice. Please visit elkaypro.com
for the most current version.
This specification describes an Elkay product with design, quality
and functional benefits to the user. When making a comparison
of other producer’s offerings, be certain these features are not
overlooked.
2222 Camden Court
OakBrook, IL 60523
630-572-3192
elkay.com
© 2014 Elkay
SPEC00083 (09/2014)
Buy at
| 855-558-9600 | BottleFillingStations.com
EZH2O Bottle Filling Station
®
With Bi-Level Mechanically-Activated Water Cooler
Models EMABFTL8WS and EMABFTLDDWS
1/4” O.D. TUBE
WATER INLET
TO COOLER
3/8” O.D. TUBE CONNECT
COLD WATER SUPPLY
NOTE: WATERFLOW
DIRECTION
ROUGH-IN DIMENSIONS
IMPORTANT!
INSTALLER PLEASE NOTE
BUILDING WATER
INLET
This water cooler has been designed and built to provide water to the user which
has not been altered by materials in the cooler waterways. The grounding of
electrical equipment such as telephone, computers, etc., to water lines is a
common procedure. This grounding may be in the building but may also occur
away from the building. This grounding can cause electrical feedback into a
water cooler creating an electrolysis which creates a metallic taste or causes
an increase in the metal content of the water. This condition is avoidable by
installing the cooler using the proper materials as shown below.
SERVICE STOP
(NOT FURNISHED)
OPERATION OF QUICK CONNECT FITTINGS
SIMPLY
PUSHIN
IN
SIMPLY PUSH
TUBE TO
TUBE
TOATTACH
ATTACH
A
A
TUBE
TUBEIS
IS SECURED
SECURED
INPOSITION
POSITION
IN
NOTICE
PUSH
PUSHIN
IN COLLET
COLLET
TORELEASE
RELEASE TUBE
TUBE
TO
B
This water cooler must be connected to the water supply using a dielectric
coupling. The cooler is furnished with a non-metallic strainer which meets this
requirement. The drain trap which is provided by the installer should also be
plastic to completely isolate the cooler from the building plumbing system.
C
Bottle Filler unit will mount on bracket attached to wall by 6 holes (as shown).
Water and electrical will connect through pre-punched hole in basin.
PUSHING
BEFORE
PUSHINGTUBE
TUBE IN
IN BEFORE
PULLING
TO
PULLING IT
IT OUT
OUT HELPS
HELPS TO
RELEASE
RELEASE TUBE
TUBE
7/16"
O 11mm
MOUNTING HOLES
(6)
17 7/8"
454mm
7"
7"
178mm
178mm
3 9/16"
90mm
15"
381mm
5 3/4"
146mm
5 3/4"
146mm
ACTIVATION
SENSOR
18 7/8"
479mm
18 1/16"
459mm
18 5/8"
472mm
HANGER BRACKET
5 3/4"
146mm
3 3/16"
82mm
6 1/2" 1 3/8"
165mm 35mm
58 9/16"
1488mm
4 9/16"
116mm
1 3/8" 1 3/8"
35mm 35mm
1 3/8"
35mm
CL
E
5/16" (8mm) DIA.
(10 HOLES)
D
11/16"
18mm
7 1/4"
185mm
E
CL
F
45 9/16"
1157mm
5 3/4"
146mm
A
37 1/2"
952mm
2 7/16"
63mm
2 9/16"
65mm
5"
127mm
20 3/8"
518mm
25 1/8"
638mm
F
10"
254mm
20 1/8"
511mm
3 1/2"
89mm
4 1/2"
114mm
B
6 1/4"
159mm
8"
203mm
39 1/2"
1003mm
18 3/4"
476mm
13 7/8"
352mm
C
33"
838mm
ORIFICE
HEIGHT
31 15/16"
811mm
RIM HEIGHT
27"
686mm
ADA
REQUIREMENT
4 1/8"
105mm
6 3/4"
172mm
12 5/16"
313mm
FINISHED FLOOR
REDUCE HEIGHT BY 3 INCHES FOR INSTALLATION OF CHILDRENS ADA COOLER
LEGEND:
A = Recommended Water Supply location. Shut-off Valve (not furnished) to accept
3/8” O.D. unplated copper tube. Up to 3” (76mm) maximum out from wall.
Job Name: ____________________________________
B = Recommended Waste Outlet location. To accommodate 1-1/2” nominal drain.
Model: _______________________ Qty. ____________
Drain stub 2” (51mm) out from wall.
Contact: ______________________________________
C = 1-1/2” Trap (not furnished).
D = Electrical Supply (3) Wire Recessed Box Duplex Outlet.
Approval Signature: _____________________________
E = Insure proper ventilation by maintaining 6” (152mm) minimum clearance from cabinet
Notes:
louvers to wall.
F = 7/16” (11mm) Bolt Holes for fastening to wall.
**New Installations Must Use Ground Fault Circuit Interrupter (GFCI).
2222 Camden Court
Oak Brook, IL 60523
elkay.com
Printed in U.S.A.
© 2014 Elkay
Download PDF