INSTALLED SOUND
We have a complete range of loudspeakers, covering most installation demands.
For amplifiers, DSP processors and signal distribution see page 64,
For PDU (Power Distribution Units) see page 70
Our experience and many years of supplying the installation market has helped us to develop our various series, covering:
• bars, lounges, nightclubs.
• Theme parks and cruiseships.
• Theatres, concert halls
• Convention centres and churches.
• Sports centre, spinning and aerobic facilities.
• Live stages.
• Outdoor facilities.
• Sports arenas.
• shops, boutiques, malls and shopping centres.
• Railway stations, subway stations and airports.
In this catalogue only our standard products and series are presented, but in larger projects, specialized solutions are often
a demand, and this is one of our many strengths.
We have, through the years, been involved in countless projects where we build according to special architectural designs,
whether it being customized colour or look.
We can custom- design, develop, and manufacture after specifications, we can help with advanced acoustical sound and
environment calculations, using the latest 3D-CAD computer software.
All our models have advanced measured 3D-files for download, to use in any acoustic calculation software
(such as ease focus2tm, Cattm, Odeontm etc.)
For subwoofers, we present max SPL and sensitivity in two ways so that the user can compare with our competitors in a fair
way. A lot of manufacturer out there use methods to make their speakers look good ”on paper” using peak power handling
(max continuous program handling times four), 2Pi (half space) and other ways to make it seems like the speaker better can
perform than it in reality can.
6
CS- & CSX- SERIES, page 18-19
Three sizes of In-wall and in-ceiling
speakers, 2-way coaxial design,
built-in 100V-trafo with different
power and 8 ohm.
VPS-SERIES, page 16-17
Wall mounted plastic installation
speakers, four sizes in black and
white, built-in 100V trafo with
different power and 8 ohm.
F-SERIES, page 8-9
Six models of fullrange passive
installation speakers,
from 6” to 15”, black or white.
CLUBLAND SERIES
page 20-21
Horn loaded fullrange speakers for
installation in large venues,
outdoor, and in sportsarenas
S-SERIES,
page 10-11
A variety of models and sizes of
Subwoofers for installation,
CLA-SERIES & CLAM21041
page 12-15
Column speakers and line array
for the very best result in churches,
theatres, conference centres etc.
7
F-SERIES
PROPHON INSTALLATION SERIES
2-way passive fullrange installation speakers
8
F-SERIES
2-way passive fullrange installation speakers
PRESENTATION
The F-series installation speakers consists of a complete range of two-way bi-amplified passive fullrange loudspeakers,
from the smallest F6 to the largest F152. All models have a similar ”sound” so that different sizes can be installed in the
same installation without unwanted frequency interference, so that all models can be mixed with very good result.
The F-series have been carefully designed with one purpose only, to be able to reproduce an accurate and unaffected
neutral sound with high resolution, low distortion in a discrete appealing design.
INSTALLATION
Developed to satisfy the demand in a series of fullrange installation speakers with a two-way design for as well speech
and song as recorded and live music.
They are easy to install and have a well balanced sound. The PROPHON F-series was designed for installation in live
performance facilities, nightclubs, bars and restaurants, conference centres, churches, theatres, theme parks etc.
where design, sound quality and flexibility are essential.
FEATURES
• 2-way passive design with advanced crossover networks.
• Superb sound quality with fullrange frequency response, rich base, and clear midrange.
• Neutral appearance with appealing design.
• Two M10 threads, one on each side, for installing with the speaker bracket.
• Easy to install with the dedicated installation bracket (extra)
• Protective perforated steel grille and speaker foam, both with minimum air flow resistance.
• Can be ordered in any colour, Black and white are standard.
APPLICATIONS
• Bars and restaurants
• Nightclubs and discoteques
• A/V rooms
• Conference centres
• Cruise ships, theme parks and leisure facilities
• Churches
• Live stages
• Theatres and concert houses.
• Places of worship
A vast range of installation brackets
are available (see separate brochure)
Several smart installation hardwares
are available (see separate broshure)
Selected models are available in the
Ease focus 2 database for acoustic
simulations and presentations.
Technical specifications F-series fullrange installation speakers.
Model
F6
F8
F10
F12
F122
F152
Frequency Sensitivity Nominell
Power
Construction range
-6dB (1w / 1m) Impedance handling
Passive,
bass reflex
Passive,
bass reflex
Passive, bass
reflex
Passive, bass
reflex
Passive,
bass reflex
Passive,
bass reflex
120Hz19kHz
90Hz19kHz
80Hz19kHz
60Hz19kHz
60Hz19kHz
50Hz19kHz
94dB
8 ohm
96dB
8 ohm
99dB
8 ohm
99dB
8 ohm
100dB
8 ohm
99dB
8 ohm
150W
RMS
200W
RMS
250W
RMS
300W
RMS
400W
RMS
500W
RMS
Max SPL
dB@1m.
Calc.
Size / cm.
HxWxD
119
22/16 x 26 x 20
120
27,5/19 x 35 x 27
126
34/26 x 46 x 28
127
43/30 x 54 x 38
128,5
43/30 x 54 x 38
130
50/29 x 60 x 45
Low
Weight frequency
Kg
driver
6”
5
150 mm.
8”
10
200 mm.
10”
11
250 mm.
12”
20
320 mm.
12”
24
320 mm.
15”
33
400 mm.
High
Dispersion
frequency
driver
HXv
1”
o conical
90
25 mm.
1”
100o conical
25 mm.
1”
90o x 60o
25 mm.
1”
80o conical
25 mm.
2”
80o conical
50 mm.
2”
80o conical
50 mm.
Color
Black /
white
Black /
white
Black /
white
Black /
white
Black /
white
Black /
white
9
S-SERIES
PROPHON INSTALLATION SERIES
Bi-amplified installation subwoofers
10
S-SERIES
Bi-amplified installation subwoofers
PRESENTATION
The Prophon S-Series was designed as a series of high power low frequency installation subwoofers for use in live
applications and for recorded music. The design is front loaded tuned bass reflex for reproducing natural sounding,
controlled low frequencies. The powerful low frequency drivers have been developed to satisfy the high demands put on
today’s subwoofers in performance, power handling and Max SPL. This has been ensured using double spider
technology, reinforced cone structure, and vented magnet assembly.
The cabinets are manufactured from heavily reinforced 19 mm. Medium Density Fibreboard, using high precision fully
computer-controlled CNC-machines, and painted with a specially developed two-component hardened paint.
The woofers are protected by a fully covering, 1,5 mm thick, perfored steel grille and a speaker foam, both with
minimum air flow resistance and acoustic interference.
All models in the S-series comes in two versions, where the only difference is the power handling, making the S-series
extremely versatile in projecting and installing.
FEATURES
• High power installation subwoofers featuring two versions of each speaker, with different power handling.
• Painted with two-component hardened lacque.
• Built with 19 mm. heavily reinforced medium density fibreboard for minimum cabinet vibration.
• 1,5 mm. protective perfored steel grille with speaker foam.
• Custom woofers for best performance.
• Neutrik speakon input and link out.
• Frontloaded tuned bass reflex construction for optimal frequency coverage.
• High max SPL, low distortion.
• Tuned for reproducing low frequencies with perfect cone control.
APPLICATIONS
• Bars and restaurants.
• Nightclubs and discoteques.
• Conference centres.
• Cruise ships, theme parks and leisure facilities.
• Live stages.
• Theatres and concert halls
• Work-out centres, aerobic-rooms and spinning-rooms
• Schools and other public address environment
Technical specifications S-Series installation subwoofers
Model
Construction
Frequency
range -6dB
S12L
Bi-amplified
bass reflex
Bi-amplified
bass reflex
Bi-amplified
bass reflex
Bi-amplified
bass reflex
Bi-amplified
bass reflex
Bi-amplified
bass reflex
Bi-amplified
Bass reflex
Bi-amplified
Bass reflex
Bi amplified
Bass reflex
Bi amplified
Bass reflex
Bi-amplified
Bass reflex
Bi-amplified
Bass reflex
45 - 500Hz
S12
S15L
S15
S18L
S18
S215L
S215
S218L
S218
S21L
S21
40 - 500Hz
35 - 400Hz
35 - 400Hz
30 - 400Hz
30 - 400Hz
35-400Hz
35-400Hz
30-400Hz
30-400Hz
25-200Hz
25-200Hz
Sensitivity
(1w / 1m)
open space (4pi)
Half space (2pi)
95 dB
98 dB
95 dB
98 dB
99 dB
102 dB
96 dB
99 dB
99 dB
102 dB
97 dB
100 dB
102 dB
105 dB
99 dB
102 dB
102 dB
105dB
100 dB
103 dB
97 dB
100dB
96 dB
99 dB
Nominell
Impedance
Power
handling
8 ohm
450W RMS
900W cont..
1000W RMS
2000W cont..
550W RMS
1100W cont..
1000W RMS
2000W cont..
600W RMS
1200W cont.
1200W RMS
2400W cont..
1100W RMS
2200W cont..
2000W RMS
4000W cont..
1200W RMS
2400W cont..
2400W RMS
4200W cont.
1700W RMS
3400W cont..
2000W RMS
4000W cont..
8 ohm
8 ohm
8 ohm
8 ohm
8 ohm
4 ohm
8 ohm
4 ohm
4 ohm
4 ohm
4 ohm
Max SPL
dB@1m.
cont..
/ Peak*
125 dB
133 dB
128 dB
137 dB
129,5 dB
138,5 dB
129 dB
138 dB
130 dB
139 dB
130,5 dB
139,5 dB
135,5 dB
144,5 dB
135 dB
144 dB
135,5 dB
144,5 dB
136,5 dB
145 dB
130,5 dB
140,5 dB
132 dB
141 dB
Size / cm.
HxWxD
Low
frequency
driver
Voice coil
diameter
Color
50 x 40 x 35
1 x 12”
320 mm.
1 x 12”
320 mm.
1 x 15”
400 mm.
1 x 15”
400 mm.
1 x 18”
460 mm.
1 x 18”
460 mm.
2 x 15”
400 mm.
2 x 15”
400 mm.
2 x 18”
460 mm.
2 x 18”
460 mm.
1 x 21”
530 mm.
1 x 21”
530 mm.
3”
76 mm.
4”
100 mm.
3”
76 mm.
4”
100 mm.
3”
76 mm.
4”
100 mm.
3”
76 mm.
4”
100 mm.
3”
76 mm.
4”
100 mm.
4,5”
116 mm.
6”
153 mm.
Black /
white
Black /
white
Black /
white
Black /
white
Black /
white
Black /
white
Black /
white
Black /
white
Black /
white
Black /
white
Black /
white
Black /
white
50 x 40 x 35
60 x 48 x 54
60 x 48 x 54
73 x 55 x 60
73 x 55 x 60
100 x 50 x 54
100 x 50 x 54
120 x 60 x 60
120 x 60 x 60
80 x 60 x 67
80 x 60 x 67
* All Max SPL data are calculated and presented in two ways: continues and Peak, the continues max SPL are the most accurate, but some of our competitors use
the peak reference, so we feel obliged to do the same, remember that we suggest that the continues max SPL are used. The Max peak spl are only for your reference.
Max SPL peak have the following equation: sensitivity in 2Pi times peak power handling (4 x continues power handling) equals max SPL peak
11
CLA-SERIES
PROPHON INSTALLATION SERIES
Column Linear Array
12
CLA-SERIES
Column Linear Array
PRESENTATION
The CLA series of column linear arrays was developed to blend in with the environment and still reproduce astounding
dispersion control in collaboration with a fullrange frequency response for speech, recorded music and live applications.
Most column speakers from our competitors have the frequency response focused around the vocal frequencies,
covering a meagre 250Hz up to maybe 10-12 kHz, we have a different approach, knowing that today´s demand in a
sound system are way higher, where a fullrange sound, covering all frequencies are essential to reproduce both music
and speech with accuracy, presence and clarity.
FEATURES
• Extremely high SPL (>108dB)
• Controlled vertical and horizontal dispersion
• Low distortion
• Easily handles both speech and music
• Fullrange frequency response 100Hz - 18kHz
• Extended frequency response with any of our subs.
• Flight ware included for easy installation
• Bi-amplified or self-powered
• Fully covering perfored steel grille, with protective speaker foam.
• Sleek and neutral design.
• Typical -3dB behaviour for each doubling of distance (point source speakers lose 6dB for each doubling of distance)
APPLICATIONS
• Churches
• Auditoriums
• Convention centres
• Malls
• Shopping centres
• A/V rooms
• Theatres
• Concert halls
• Conference centres
• Public address
Typical controlled narrow vertical dispersion, and wide horizontal dispersion,
of a column array speaker.
Technical specifications CLA-series Column Linear Array
Model
CLA8881
CLA8681
CLA8311
CLA4611
Frequency Sensitivity
Nominell
Construction range
(1w / 1m) Impedance
-6dB open
space
Bi-amplified
70Hz
109 dB
8 x 8 ohm
basreflex
- 19kHz
Bi-amplified 100- 19kHz
107 dB
8 x 8 ohm
bass reflex
Bi-amplified
150Hz
104 dB
8 x 8 ohm
closed
- 20kHz
Bi-amplified,
120Hz
98 dB
2 ohm
closed
-20kHz
Power
handling
2000W
RMS
1200W
RMS
400W
RMS
600W
RMS
Max SPL
Low
High
dB@1m. frequency frequency Dispersion
HxV
Calc.
driver
driver
8
x
8”
8
x
1”
custom
140
200 mm.
25 mm
defined
8 x 6”
8 x 1”
custom
139
150mm.
25 mm
defined
8 x 3,5”
1” dome
custom
130
100 mm.
tweeter
defined
4 x 6,5”
1 x 1”
custom
129
150mm.
25 mm.
defined
Color
Black /
white
Black /
white
Black /
white
Black /
white
13
CLAM21041(Column Linear Array Module)
PROPHON INSTALLATION SERIES
Fixed installation line array module
14
CLAM21041
(Column Linear Array Module)
Fixed installation line array module
PRESENTATION
The CLAM21041 is a line array module for fixed installations. The specially designed horn and wave guides flattens the sound waves
to a perfectly non-delayd symmetrical wave front with a 100 x 15 dispersion pattern.
The bi-amplified construction allows for economical use of external amplifiers and DSP processors,
(available presets in all our processors and amplifiers with built-in dsp´s)
We have omitted all external features in the CLAM21041, to reduce manufacturing cost, so that the module can perform like the most
expensive tour line arrays, but cost a fraction, the splay tilting hardware was designed to be easy to use, safe and economical.
Most hardwares for line arrays are designed for tour and rental applications, with versatility and “on-the-road” thinking,
resulting in very expensive hardwares, usually costing as much as 20% of the actual speaker, this is of very little use in fixed installations.
We have also looked into how line arrays often are installed, and the CLAM21041 are actually two line array modules in one cabinet,
Each driver and woofer has a perfect alignment, resulting in a seamless linear wave front.
The cabinet were designed to be as shallow as possible (only 280 mm.) knowing that depth is often a problem
when installing Line arrays.
Features:
• 2 x 10” high power, custom woofers
• 4 x 1”-drivers mounted on separate wave guides and horns with a 100x15 dispersion pattern.
• Easy to install, with only one, multi usage, installation bracket for fixing splay angles.
• Available in the free Ease Focus 2 software, for acoustical calculations, simulations, predictions and presentations
• Controlled dispersion pattern of H100 x V15
• True line array coupling, with a typical -3dB / doubling of distance
• DSP presets available to download from our web site to all our processors and DSP amplifiers.
• Only 280 mm. in depth, for discreet installations.
• Fully covering perfored steel grille with speaker foam behind
Applications:
• Churches
• Multi arenas.
• Concert halls
• Football stadiums.
• Large live venues.
• Auditoriums
• Hockey rinks.
• Large nigh clubs.
• Large cinema theatres
• Theatres
• Conference centres
• Places of worship
TECHNICAL SPECIFICATIONS CLAM21041, LINE ARRAY MODULE
Model
Speaker type
Components
Power handling
Sensitivity
Max SPL (calc.)
Impedance
Dispersion
Frequency response
Dimensions
Weight
CLAM21041
2-way, bi-amplified line array module for fixed installations
LF: 2 x 10” woofers frontloaded bass reflex column arrayed
HF: 4 x 1” drivers, mounted on seamless wave guides.
LF: 400W RMS / 800W cont..
HF: 80W RMS / 160W cont..
LF: 99dB, 1W/1m. (2x97 dB)
HF: 113dB, 1W/1m. (4 x 107dB)
Continuous, open space: 129dB
Peak, 2Pi half space: 136,5dB
LF: 2x8ohm (4ohm)
HF: 4x8 ohm (2ohm)
H100 x V15
Array dependent, (1 module: 60-18kHz, -6dB)
H570 x W520 x D280
The CLAM21041 are available in the EASE FOCUS 2 database for acoustical simulations, predictions and presentations,
CLF-files are also available for down loading and importing into architectural construction- acoustic- and CAD- soft wares.
15
VPS-SERIES
PROPHON INSTALLATION SERIES
Fullrange, 100V / 8 ohm wallmount speakers
16
VPS-SERIES
Fullrange, 100V / 8 ohm wallmount speakers
PRESENTATION
The VPS SERIES are a complete range of high quality fullrange installation speakers,
VPS is short for Versatile Plastic Speakers, and that may be saying it all?
A series of reliable speakers that fits everywhere, with their neutral design they blend in every possible installation,
Whether it being a bar or a restaurant, a shop or a mall, a conference room or a A/V room, even in a high quality home cinema.
There are four models of passive speakers that all comes in black (B) or white (W), and one active version of the VPS502.
With a 4”-woofer, 5”-woofer, 6”-woofer and a 8”-woofer.
The VPS502W are also available in active version, with built-in amplifier, treble and base control, volume control, XLR input and
output, power on/off.
Each passive model has a built-in 100V transformer with a select switch in the back for easy setting different power-taps,
they can also be run in 8 ohm mode.
When we started with the developing and designing process, we did not want to do ”yet another plastic speaker made in china”
so very hard work was put into choosing components, designing crossovers and looking into the need and demand in these kind
of speakers, talking to installers, project managers, architects and sound engineers, and after endless hours of testing and evaluating, both in our testing facility, our lab, and in numerous real installation environments the VPS series are born, after thousands
upon thousands of VPS speakers sold, we can look back on all the work put into the series and say ”it was worth it!”
With a neutral and clear sound, low distortion and wide frequency response the VPS-series are your perfect installation partner!
INSTALLATION
Developed to satisfy the demand in a series of fullrange installation speakers with a two-way design for speech and
recorded music. They are easy to install and have a well balanced sound.
The PROPHON VPS-series has been designed for use in restaurants, bars, shops, hospitals, schools, A/V-rooms,
conference centres, malls, cruise-ships, and other leisure facilities, where design, sound quality and flexibility are essential.
All models in the VPS-series has
a built-in 100V transformer with a
switch for chosing different
power-taps or 8 ohms.
Applications:
• Bars and restaurants
• Shops and malls
• Public address
• Schools
• A/V rooms
• Conference centres
• Cruise ships, theme parks and leisure facilities
• Churches and theatres
• High-end home cinema, and surround systems.
VPS502WA
with built-in amplifiers
Technical specifications
Model
Features:
• 2-way passive design with advanced dedicated crossover networks
• Sold in pairs
• superb sound quality with fullrange frequencyresponse, rich base and clear midrange
• installation brackets included
• built-in 100V transformer with a select switch for different power taps
• Can be run in 8 ohm, easily adjusted with the power tap switch
• Neutral appearance with appealing design
• Two M6 thread in the back makes the VPS-series
• Easy to install with any standard wall bracket.
• Weatherproof design.
Low
High
Weight Line100V
switch, frequency frequency
Color
Kg
power
driver
driver
Yes, 2w, 4w,
4”
Black /
40W RMS 210x160x135
2,0
8w, 16w, 8
(100mm) 13 mm dome white
ohm
Yes, 2w, 4w,
5”
Black /
50W RMS 240x180x145
2,6
8w, 16w, 8
(125mm) 13 mm dome white
ohm
5”
50W RMS 240x180x145
2,6
No
(125mm) 13 mm dome White
Yes, 2w, 4w,
6”
Black /
60W RMS 290x215x165
4,0
8w, 16w, 8
(150mm) 25 mm dome white
ohm
Frequency Sensitivity Nominell
Power
Construction range
-6dB (1w / 1m) Impedance handling
VPS402
Passive,
closed box
120Hz22kHz
84dB
8 ohm
VPS502
Passive,
closed box
100Hz22kHz
86dB
8 ohm
VPS502WA
Active,
closed box
100Hz22kHz
86dB
8 ohm
VPS602
Passive, bass
reflex
90Hz22kHz
85dB
8 ohm
VPS802
Passive, bass
reflex
65Hz22kHz
88dB
8 ohm
Size / mm.
HxWxD
85W RMS 350x270x180
6,9
Yes, 4w, 8w,
16w, 32w, 8
ohm
8”
/
25 mm dome Black
white
(200 mm)
17
CS- & CSX- SERIES
PROPHON INSTALLATION SERIES
Ceiling & in-wall speakers
PRESENTATION
The PROPHON CS-Series consists of three sizes of coaxial 2-way ceiling speakers with passive
crossover and a built in 100V line-transformer that enables all models to be run either in 8 ohm-version or
100V in 5W, 10W, 20W or 30W depending on model and configuration.
Installing is made easy by the 3 adjustable fastening locks, that can be mounted on 8 mm to 30 mm thick
ceilings or walls.
The drivers are protected with a fully covering perfored steel grille. CS502 consists of a 5”-woofer and a
0,75”-dome tweeter, CS602 consists of a 6” woofer and a 0,75”-dome tweeter, CS802 consists of a 8”woofer
and a 1”-dome tweeter.
The PROPHON CSX-series have the same technical specifications, but an even better sound quality
with higher sensitivity, and a back-cover with push-terminals and a select switch for easily choosing
power-taps when installing.
INSTALLATION
Developed to satisfy the demand in a series of ceiling / in-wall speaker with a two-way fullrange sound
for speech and recorded music. They are easy to install and have a well balanced sound. The PROPHON
CS-series has been designed for use in shops, hospitals, schools, A/V-rooms, conference centres, malls,
cruises, and other leisure facilities, where design, sound quality and flexibility are essential.
Features:
• 2-way coaxial design
• Easy to install with smart hardware
• Superb sound quality with fullrange frequency
response, rich base and clear midrange
• Adjustable dispersion on tweeter
• Built-in 100V transformer with different power
taps
• Can be run in 8 ohm if bypassing the transformer
• Sleek design with only 65 - 85 mm. depth,
depending on model
Applications:
• Bars and restaurants
• Shops and malls
• Public address
• Schools
• A/V rooms
• Conference centres
18
CS- & CSX- SERIES
Ceiling & in-wall speakers
100V in
Push-terminal color code
Connection guide 100V power tap CS-series
CS502 / CS602
CS802
Speaker in
Speaker in
Orange (+)
positive
Orange (+)
positive
White (-)
ne-
White (-)
ne-
Transformer
Transformer
Black Yellow Grey Green
Com - 20W
15W 10W
Black Yellow Grey Green
Com - 30W
20W 10W
INPUT FROM
100V AMPLIFIER
INPUT FROM
100V AMPLIFIER
Above:
CSX-Series back cover
with push-terminals and power-tap 70V/100V
Below:
Depth (C) of the back-cover
DIMENSIONS CS-series
C, depth
D, mounting
height
C
A, overall
diameter
B, cutout
Frontgrille on the CSX-series
Technical specifications CS- & CSX- Series
MODEL
Components
/ design
Color
Measurements
Dispersion
Power-taps
CSX-series
Wiring CS-series
(color) =old version
100V / 8 ohm
Power
Handling
Sensitivity
@ 1W/1m.
+-6dB
Weight
CS-502 /
CSX-502
5”-woofer /
0,75”-dome
tweeter, coaxial
passive
White
A= 200 mm.
B= 172 mm.
C= 65 mm. /
(CSX=135 mm)
D= 8 - 30 mm.
80o
conical
Line in: 70V/100V
2,5W,/5W/10W/20W
White = 10W,
Blue = 15W,
Green = 20W
Black = com (-)
Bypass = 8 ohm
20W
RMS
CS - 88dB
1,35 kg
6”-woofer /
0,75”-dome
tweeter, coaxial
passive
White
A= 230 mm.
B=200 mm.
C= 70 mm.
(CSX=160 mm)
D= 8 - 30 mm.
80o
conical
White 10W,
Blue 15W,
Green 20W
Black com (-)
Bypass 8 ohm
20W
RMS
8”-woofer /
1”-dome tweeter,
coaxial passive
White
A=260 mm.
B=226 mm.
C= 85 mm.
(CSX=210 mm)
D= 8 - 30 mm.
80o
conical
Blue 10W, (white)
Green 20W, (blue)
Red 30W (yellow)
Black com (-)
Bypass 8 ohm
30W
RMS
CS-602 /
CSX-602
CS-802 /
CSX802
8 Ohm
Line in 70V / 100V
3,8W/7,5W/15W/30W
8 Ohm
Line in: 70V/100V
5W/10W,/20W/40W
8 Ohm
CSX - 91dB
CS - 90dB
1,6 kg
CSX - 93dB
CS - 92dB
1,95 kg
CSX - 95dB
19
CLUBLAND SOUND SYSTEM
PROPHON INSTALLATION SERIES
High power, high end, horn loaded speakers for installation and tour applications
PRESENTATION
The CLUBLAND SOUND SYSTEM is a range of horn loaded long throw speakers that were developed in line with the growing
demand in better reinforcement systems in large nightclubs, stadiums, venues, sports facilities and arenas.
Often these kind of installations must cover vast distances or have a controlled dispersion, very often both these features.
The prophon CLUBLAND series was designed to reproduce extremely high SPL in collaboration with low distortion levels and an
accurate dispersion control, and at the same time deliver an unsurpassed frequency response, covering the whole fullrange frequency
range.
The horn loaded top/fullrange- speakers individually have an extremely high sensitivity
of 108dB, 1W/1m. with very low distortion.
For extended low frequency response when reproducing music the 2x15” C.C.C
(Common Compression Chamber) CLV215 subwoofer is the perfect complement.
PROPHON CLUBLAND High-power sound system, was designed for both fixed
installations in large nightclubs, places of worship, live music clubs, sports-arenas,
venues and stadiums, and for touring, and the event & rental industry.
The CLUBLAND series consists of six individual self-powered or bi amped loudspeakers,
designed to be combined in a variety of setups depending on application.
In a fixed installation, a bi-amped setup is often preferable, in the rental industry selfpowered speakers has come to dominate thanks to easy-to-use built-in amplifiers and
DSP-processors with factory presets for a variety of setups
Features:
• Extremely high SPL (>108dB)
• Controlled dispersion
• Low distortion
• Easily covers speech and music over vast distances
• Fullrange frequency response
• Extended frequency response with the CLV215 SUB
• Flight ware included for easy installation
• Bi-amplified or self-powered
• Fully covering perfored steel grille front
Applications:
• Large nighclubs.
• Fotball stadiums.
• Multi arenas.
• The rental industry.
• Live bands
20
• Large live venues.
• Hockey rinks.
• Sports events.
• Tour applications.
• Portable DJ´s
Suggested system configuration:
In the mid/high frequency range there are two models: the CLH81 and the CLH122, both cabinets consists of a 2-way hornloaded construction, the CLH81 is a mid/high horn loaded speaker, the CLH122 is a fullrange horn loaded speaker.
The CLH81 houses a horn loaded 8”- woofer and a 1”-driver mounted on a horn, both with a dispersion of 80x60,
the frequency range covers 250Hz - 20kHz, and requires the low-mid speaker CLV215 to reproduce a fullrange sound.
The CLH122 houses a 12”/2”-combination loaded onto horns with a dispersion of 90x60, the frequency range covers
100Hz - 18,5kHz. and can be used as a fullrange horn loaded speaker in both fixed installations and live performances,
for extended low frequency fullrange reproduction a CLV215 is recommended.
The CLV215 loudspeaker has a frequency response that spans from 30Hz to 500Hz, making it very versatile in setup and
system configurations. It can either be used as a low-mid, covering 50-350Hz in an fullrange installation with the CLH81
or the CLH122 in sports arenas, outdoors or indoors, or in larger 4-way sound systems as lo-mid covering 90Hz-350Hz in
combination with the CLH81 or the CLH122 and external subwoofers for extended frequency response down to 25Hz.
The CLV can also function as a high power subwoofer covering 30Hz to 110Hz in a 3-way system with the CLH122,
either flown or stacked.
The CLB118 is a high power single 18”-frontloaded tuned bass reflex subwoofer, constructed to reproduce accurately the low fre-
quencies with minimum distortion and with total control of cone-suspension. CLB118 will deliver that sought-after, but rarely achieved
punch, both DJ´s and live sound technicians want.
The CLB121 infra-sub will blow you away!
The high power single 21”- frontloaded tuned bass reflex subwoofers was designed to deliver an unsurpassed low end punch.
The DJ´s, the musicians and the crowd will love it... ...the neighbours... wherever they may be... will hate it!
The CLHB212 horn loaded 2 x 12” subwoofer with an astounding sensitivity of 109dB 1W/1m.@80Hz and 105dB 1W/m@30Hz,
extremely high SPL can be achieved in the sub-frequencies. The HB212 has an attack that no competitors can even dream of
achieving, with the double 12”-woofers and carefully engineered horn, both the very lowest frequencies and the more rapid upper
sub is transduced with exceptional clarity. The subwoofer frequencies also reaches further away thanks to the long-throw horn construction, matching the horn loaded midrange and high range speakers.
Each loudspeaker has Its own purpose and frequency response, so that when setting up a complete rig you can take into
account what the system is supposed to achieve.
In short, the CLUBLAND SOUND SYSTEM are a high-end, stack able / rig able, self-powered or bi-amplified, horn loaded,
5-way system with extremely high SPL, ultra-low distortion level, for installation in large venues or for concerts and live applications
The self powered versions are
mainly used for tour and portable
applications.
Controlled dispersion pattern
with CLF-balloon files for download
Low distortion / High SPL horns,
specially designed for the clubland.
Technical specifications CLUBLAND SOUND SYSTEM, horn loaded speakers.
Sensitivity Nominell
(1w / 1m)
open space Impedance
Power handling
Max SPL
dB@1m.
Calc.
Size / cm.
HxWxD
Low frequency
driver
8 ohm
250W RMS / 500W cont..
138
60 x 60 x 60
107 dB
8 ohm
500W RMS / 1000W cont..
139
90 x 60 x 60
106 dB
4 ohm
1200W RMS / 2400W cont..
141
60 x 60 x 60
Model
Construction
Frequency
range -6dB
CLH81
closed, horn loaded
250 - 19kHz
109 dB
100- 19kHz
High
frequency Dispersion
HxV
driver
1”
80 x 60
25 mm
2”
60 x 40
25 mm
CLB118 Front loaded bass reflex
35-200Hz
100dB
8 ohm
1200W RMS / 2400W cont..
137
60 x 60 x 60
8”
200 mm.
12”
320 mm.
2 x 15”
400 mm.
18”
460 mm.
CLB121 Front loaded bass reflex
25-100Hz
99 dB
4 ohm
2000W RMS / 4000W cont..
138
80 x 60 x 65
21”
525 mm.
-
-
CHB212 Horn loaded subwoofer
30-200Hz
108
4 ohm
2000W RMS / 4000W cont..
144
90 x 72 x 124
2 x 12”
320 mm.
-
-
CLH122 bass reflex, horn loaded
CLV215
Common Compression 35Hz - 500Hz
Chamber
-
-
-
-
21
Download PDF