Modem Setup (Mac)

4
Device Recognition (Mac)… ……………………………………………………………………………… 4-2
Software Installation (Mac)………………………………………………………………………………… 4-2
Device Removal (Mac)……………………………………………………………………………………… 4-4
Modem Setup (Mac)
Modem Setup (Mac)............................................................................................................................ 4-2
Modem Setup (Mac)
Device Recognition (Mac)
With USIM Card installed, insert modem USB plug into Ma USB port. Mac
should automatically recognize modem within approximately 45 seconds.
Installing SoftBank HW Utility
Use this modem to access Network or adjust settings.
All screenshots and procedures based on Mac OS 10.6.
4
Modem Setup (Mac)
• If HW Utility is installed to Mac other than for this modem, uninstall it according
to instructions provided with it.
• Do not remove modem during installation. May cause installation failure, system
malfunction or other system errors.
a Power on Mac and initiate Mac
b Insert modem into Mac.
If icon appears on desktop, double click it.“ SoftBank UTILITY” folder opens
automatically
c Double click “SoftBank HW Utility” to start installation and display
below window. Click “Continue”
System message appears upon modem recognition. See ”Software Installation
(Mac)” to install SoftBank HW Utility.
• M
odem may fail if Mac enters sleep mode, etc. with it connected. Remove
modem before leaving a Mac unattended, etc. Modem may malfunction
if connected before Mac starts/restarts. Remove modem before starting or
restarting Mac.
4-2
Software Installation (Mac)
d Software License Agreement appears. Click “Continue”
g “Certification” appears. Enter User Name and Password and click
“OK”
4
h Installation starts
i When window below appears, click “Restart”
Modem Setup (Mac)
e If agreed, click “Agree.” If Change Install Location appears, select
target folder and click “Continue”
f Standard Install on Macintosh HD dialog box appears. Click “Install”
• Restart Mac. It does not function correctly.
• ”Macintosh HD” is hard disk name. It may vary.
4-3
Uninstalling SoftBank HW Utility
to open Finder
a Click
b Delete SoftBank HW Utility
• Drag Uninstall SoftBank HW Utility file from /Macintosh HD/ Applications
folder into trash bin.
4
c Delete driver
Modem Setup (Mac)
• Drag HuaweiDataCardDriver.kext file from /Macintosh HD/System/
Library/Extensions folder into trash bin.
• Drag USBExpressCardCantWake_Huawei.kext file from /Macintosh
HD/System/Library/Extensions into trash bin.
Device Removal (Mac)
• C
lose SoftBank HW Utility before removing modem. Do not remove modem
during transmissions.
Follow the steps below to remove modem from Mac.
Modem may be damaged if it is improperly removed.
to open Finder
a Click
beside “SoftBank_UTILITY”
b In Finder, click
d Delete Modem Scripts
• Drag HUAWEI Mobile Connect - 3G Modem file from /Macintosh HD/
System/Library/Modem Script folder into trash bin.
• Drag HUAWEI Mobile.ccl folder from /Macintosh HD/System/Library/
ModemScripts folder into trash bin (Mac OS X 10.5 only).
• Drag HUAWEI Mobile Connect - 3G Modem file from /Macintosh HD/
Library/Modem Scripts folder into trash bin.
e Delete Installer
• Drag HWNetMgr folder from /Macintosh HD/Library/StartupItems folder
into trash bin.
• Drag HWPortDetect folder from /Macintosh HD/Library/StartupItems
folder into trash bin.
f Restart Mac
• ”Macintosh HD” is hard disk name. It may vary.
• If Memory Card is installed, first click
”SoftBank_UTILITY.”
card removal icon, then click
beside
c Remove modem from Mac
In Finder, if the above icon does not appear, end SoftBank HW Utility and
remove modem.
4-4
Download PDF