Daybed Conversion Rail (M3099)- Assembly and

Daybed Conversion Rail (M3099)- Assembly and Operation
PARTS & HARDWARE
A. Guard Rail
C. Allen wrench
B. 1 3/4" Allen head bolt (4)
STEP 1.
STEP 2.
Unscrew the bolts and remove the cross bar
and front panel.
Move the spring frame to the lowest level.
STEP 3.
B
Attach the guard rail (A) to the side panel
posts using four Allen head bolts (B).
The guard rail can be installed with the
high end facing either to the left or the
right.
B
B
Check to make sure that all of the bolts
are fastened securely.
Do not overtighten.
revised 18MAR2011
A
A
page 1
The mattress intended for use on the bed shall be a full-size mattress having
minimum dimensions of 51 5/8 " (1310 mm) in length, 27 ¼"(690 mm) in width
and 4" (100 mm) inthickness and not exceeding 6" (152 mm).
The intended user's minimum age must be at least 15 months old and maximum
weight must not exceed 50 lbs (22.7 kg).
WARNING
:
Failure to follow these warnings and the assembly instructions could result in
serious injury or death from entrapment or strangulation.
DO NOT place bed near windows where cords from blinds or drapes may strangle a child. DO NOT place
items with a string, cord, or ribbon, around a child’s neck, such as a hood strings or pacifier cords. DO NOT
suspend strings over a toddler bed for any reason. If guard rails are used as the mattress containment
means, guard rails provided must be used to avoid the formation of a gap between the mattress and the bed
that could cause an entrapment.
page 2
Download PDF