OPS Standalone Adapter 2.0 - NEC Display Solutions Europe

Datasheet
Order Code: 100014153
OPS Standalone Adapter 2.0
Standalone operation for OPS devices
An external adapter which allows
The OPS Standalone Adapter 2.0 allows standalone operation for
standalone operation of OPS slot-in
testing, servicing as well as for permanent standalone operation in all
multiple OPS devices. This provides standalone operation for set-up,
computers and other OPS devices
displays which do not feature the OPS-slot. This makes configuration of
which operate externally from
performance for every display.
all OPS based products simple and delivers 24/7 standalone computing
connected large format displays,
projectors and desktop monitors.
Standalone Adapter
Delivering Genuine Benefits
●● One PC-System for all Displays involved even if an OPS-Slot
for integrated operation is not available for all devices
●● Ideally suited for 24/7 operation
●● Power supply and full PC-functionality in combination with
almost all displays or projectors. Only requiring a few clips for
installation or removal
●● Comprehensive connectivity: 2 x USB, HDMI, DisplayPort,
Audio & RS232
●● High quality and wide range of use: Industrial grade
components and construction
Standalone Adapter with OPS
NEC Display Solutions Datasheet
OPS Standalone Adapter 2.0
Technical Specifications
Order Code
OPS Standalone Adapter
100014153
CONNECTIVITY STANDALONE ADAPTER
Interfaces
2 x USB 2.0
1 x HDMI
1 x DisplayPort (only if Slot-in PC supports DP, no DP to DVI/HDMI possible )
1 x RS232 (RX and TX only)
Internal OPS-interface to STv2 Slot-in PC (JAE 80-pin connector)
1 x Audio OUT, Mini Jack 3.5mm
ELECTRICAL
Power Supply
100-240 VAC, 50 - 60Hz
Power Consumption [W]
Depending on Slot-in PC (max. 60W)
ENVIRONMENTAL CONDITIONS
Operating Temperature [°C]
0 - 40
MECHANICAL
Net Weight [kg]
0.9
Gross Weight [kg]
1.2
Size / Gross Dimensions [cm]
25.2 x 24.1 x 3.7 / 30.0 x 29.5 x 10.8
ADDITIONAL FEATURES
Warranty
0.9
Shipping Content
Power cable, Quick reference guide, Screws x 2, Rubber feet x 4
Compatibility:
Works with OPS compliant slot-in PCs and signal adapters
For additional pictures and Solutions overview,
Visit www.nec-display-solutions.com for details.
NEC Display Solutions Europe GmbH
Landshuter Allee 12-14, D-80637 München
infomail@nec-displays.com
Phone: +49 (0) 89 99 699-0
Fax: +49 (0) 89 99 699-500
www.nec-display-solutions.com
This document is © Copyright 2017 NEC Display Solutions Europe GmbH. All rights are reserved in favour of their respective owners. The document, or parts thereof, should not be copied, adapted, redistributed, or otherwise used without the
prior written permission of NEC Display Solutions Europe GmbH. This document is provided “as is” without warranty of any kind whatsoever, either express or implied. Errors and omissions are excepted. NEC Display Solutions Europe GmbH may
make changes, revisions or improvements in, or discontinue the supply of any product described or referenced in this document at any time without notice.
Download PDF