OP5354 32 Digital Outputs User Guide - Opal-RT

OP5354 32 Digital Outputs
User Guide
www.opal-rt.com
Published by
OPAL-RT Technologies, Inc. 1751 Richardson, suite 2525 Montréal (Québec) Canada H3K 1G6
www.opal-rt.com
© 2011 OPAL-RT Technologies, Inc. All rights reserved
Printed in Canada


CONTENTS
OP5354 32 DOUT SIGNAL CONDITIONING MODULE.......................................................................... 5
DESCRIPTION ..................................................................................................................................... 5
requirements.......................................................................................................................................................5
Software........................................................................................................................................................................... 5
Hardware.......................................................................................................................................................................... 5
features. .............................................................................................................................................................5
CONFIGURATION................................................................................................................................. 6
circuit layout diagrams........................................................................................................................................6
outputs. ..............................................................................................................................................................7
TYPICAL APPLICATION........................................................................................................................ 8
DB37F PIN ASSIGNMENTS.................................................................................................................. 9
SPECIFICATIONS............................................................................................................................... 10
3
OPAL-RT Technologies OP5354 User Guide


OP5354 User Guide
OPAL-RT Technologies
4
OP5354 32 DOUT Signal Conditioning Module

OP5354 32 DOUT SIGNAL CONDITIONING MODULE
DESCRIPTION
The OP5354 is a part of the OP5000 series of optional, versatile Signal Conditioning Modules for
OPAL-RT’s state of the art HIL (hardware-in-the-loop) systems. Designed for OPAL-RT’s simulation
systems, the OP5354 provides digital output signals with specific voltage conditioning. The galvanic
isolation of the OP5354 outputs make it ideal for environments where voltage isolation is required.
The OP5354 features 32 galvanically isolated output channels and all are outputted simultaneously.
It is perfectly suited to interface with real-life environment signals, providing perfect electrical isolation
with full short-circuit protection.
requirements
Software
• RT-LAB 8.4.0 and higher
Hardware
• OP5600 HIL simulator
• OP5600 I/O Expansion Unit
• OP5607 I/O Expansion Unit.
features
•
•
•
•
•
•
5
HYPERSIM compatible
32 galvanically isolated output channels
All outputs are outputted simultaneously, at up to 40 MSPS.
Outputs stage is a Push-Pull type circuit
All outputs accept voltage of 5 to 30V and the output current is up to ±50mA.
Voltage supplied by user side.
OPAL-RT Technologies OP5354 User Guide
OP5354 32 DOUT Signal Conditioning Module
Configuration
CONFIGURATION
circuit layout diagrams
When the OP5354 is installed on the carrier board, only the top of the circuit board is visible, as shown
in Figure 1. The connectors are located on the bottom of the board (see Figure 2) and fit snugly into the
connectors on the carrier.
Figure 1: OP5354 module (top view)
Figure 2: OP5354 module (bottom view)
OP5354 User Guide
OPAL-RT Technologies
6
OP5354 32 DOUT Signal Conditioning Module
Configuration
outputs
Each galvanically isolated output has a push-pull transistor. It can sink/source up to 50 mA continuous,
and up to +30V according to user requirements. The galvanic isolation circuitry is powered by an
internal isolated DC supply.
!
CAUTION: If Vuser is connected to the simulator, the output voltage DOUT would be the same
as Vuser as long as no RT-LAB model is running (output transistor is open).
5V
ISOLATED
DC-DC
CONVERTER
GND_ISO
5V_ISO
External Vuser
3.3V
Vout
FPGA
OUTPUT
User Output
GND
Vrtn
HIGH SPEED
AMPLIFIER
GALVANIC
ISOLATOR
PUSH-PULL
STAGE
SIMULATOR SIDE
USER SIDE
Figure 3: Isolated digital output schematic
NOTE: Vrtn is normally the Vuser_GND.
7
OPAL-RT Technologies OP5354 User Guide
OP5354 32 DOUT Signal Conditioning Module
Typical Application
TYPICAL APPLICATION
The diagram below illustrates typical application examples.
5V
ISOLATED
DC-DC
CONVERTER
GND_ISO
SINK
APPLICATION
5V_ISO
+V
3.3V/2.5V
R load
RESETTABLE
FUSE
FPGA
OUTPUT
Vout
GND
GALVANIC
ISOLATOR
HIGH SPEED
AMPLIFIER
+V_RTN
PUSH-PULL
STAGE
SIMULATOR
SIDE
5V
ISOLATED
DC-DC
CONVERTER
USER
SIDE
GND_ISO
5V_ISO
PUSH-PULL
APPLICATION
+V
3.3V/2.5V
R load
RESETTABLE
FUSE
FPGA
OUTPUT
Vout
R load
GND
+V_RTN
GALVANIC
ISOLATOR
HIGH SPEED
AMPLIFIER
PUSH-PULL
STAGE
USER
SIDE
SIMULATOR
SIDE
Figure 4: OP5354 Typical sink/source (push-pull) application
NOTE: In sink mode, the digital output rise time is dependent on the voltage source (+V), the pull-up resistor
value (Rload) and the equivalent capacitor of the cable (dependent on cable length).
Connection of V_user is not mandatory in this case, however, for applications requiring fast switching of the
channel, it is recommended to connect the V_user input and the +V input to the same source.
OP5354 User Guide
OPAL-RT Technologies
8
OP5354 32 DOUT Signal Conditioning Module
DB37F Pin Assignments
DB37F PIN ASSIGNMENTS
Connector P1 Ch. 0-15
OP5354 pin
OP5354 pin
DB37F
DB37F
DB37F
assignment
assignment
Connector P2 Ch. 16-31
OP5354 pin
OP5354 pin
DB37F
assignment
assignment
1
+DOUT00
20
-DOUT00
1
+DOUT16
20
-DOUT16
2
3
4
5
6
7
7
9
10
11
12
13
14
15
16
17
18
19
+DOUT01
+DOUT02
+DOUT03
+DOUT04
+DOUT05
+DOUT06
+DOUT07
+DOUT08
+DOUT09
+DOUT10
+DOUT11
+DOUT12
+DOUT13
+DOUT14
+DOUT15
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
-DOUT01
-DOUT02
-DOUT03
-DOUT04
-DOUT05
-DOUT06
-DOUT07
-DOUT08
-DOUT09
-DOUT10
-DOUT11
-DOUT12
-DOUT13
-DOUT14
-DOUT15
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
+DOUT17
+DOUT18
+DOUT19
+DOUT20
+DOUT21
+DOUT22
+DOUT23
+DOUT24
+DOUT25
+DOUT26
+DOUT27
+DOUT28
+DOUT29
+DOUT30
+DOUT31
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
-DOUT17
-DOUT18
-DOUT19
-DOUT20
-DOUT21
-DOUT22
-DOUT23
-DOUT24
-DOUT25
-DOUT26
-DOUT27
-DOUT28
-DOUT29
-DOUT30
-DOUT31
Vuser 1 A
Vrtn*
Vuser 2 B
Vrtn*
P1
B
P2
P1
A
0
16
0
16
15
31
15
31
P2
1
20
-00
-01
-02
-03
-04
-05
-06
-07
-08
-09
-10
-11
-12
-13
-14
-15
00+
01+
02+
03+
04+
05+
06+
07+
08+
09+
10+
11+
12+
13+
14+
15+
Vrtn
Vuser
19
37
*Common return for both banks
9
OPAL-RT Technologies OP5354 User Guide
OP5354 32 DOUT Signal Conditioning Module
Specifications
SPECIFICATIONS
Product name
OP5354 (32 digital outputs - push-pull)
Part number
126-0314
Number of channels
32 digital outputs
Isolation
Galvanic isolator
Output Current max
±50 mA continuous
Output Protection
150 mA resettable fuse
Output Voltage range
5 to 30 Vdc
Output configuration
Push-pull
Delay Low-to-High
20 ns
Delay High-to-Low
20 ns
Rise/Fall times
6 / 6 ns
Power Isolation
On-board DC to DC isolated converter
Form factor
Mezzanine Type B
Dimensions
6.60 cm x 12.50 cm (2.6” x 4.92”)
I/O connector
80-pin high speed header to carrier
Operating temperature
10 to 40 ºC (50 to 104ºF)
Storage temperature
-55 to 85ºC (-67 to 185ºF)
Relative humidity
10 to 90%, non condensing
Maximum altitude
2,000 m (6562 ft.)
OP5354 User Guide
OPAL-RT Technologies
10
CONTACT
OPAL-RT Corporate Headquarters
1751 Richardson, Suite 2525
Montréal, Québec, Canada
H3K 1G6
Tel.: 514-935-2323
Toll free: 1-877-935-2323
Note:
While every effort has been made to ensure
accuracy in this publication, no responsibility
can be accepted for errors or omissions. Data
may change, as well as legislation, and you are
strongly advised to obtain copies of the most
recently issued regulations, standards, and
guidelines.
This publication is not intended to form the
basis of a contract.
Technical Services
www.opal-rt.com/support
DS15-12079-RVN 2.0
03/2015
© OPAL-RT Technologies Inc.
Download PDF