Appleton™ Mercmaster™ LED Low Profile Mounting Adapters

Mounting Adapters for Mercmaster™ LED Low Profile
NEC/CEC:
Class II Division 2, Groups F, G
Class III
Simultaneous Exposure
Type 3R, 4, 4X
NEC/CEC:
IP66
Suitable For Use In Wet Locations
Marine Outside Type (Salt Water For USA ONLY)
Lighting/LED/Floodlights: NEC/CEC, ATEX/IECEx Enclosed and Gasketed
NEC/CEC:
Class I, Division 2, Groups A, B, C, D
Class I, Zone 2 Group IIC
Class II, Division 1, Groups E, F, G
Applications
• Mounting Hood adapters allow the end –user to seamlessly
retrofit energy efficient, Mercmaster LED Low profile luminaires
to pre-existing mounting hoods
• Adapters are certified for use with Appleton Mercmaster LED
Low Profile Luminaires
• Mercmaster LED Low Profile is an enclosed and gasketed
luminaire, suitable for use in:
— A wide range of industrial, chemical processing and other
areas where flammable gases and vapors may be present
— Marine and wet locations
— Areas of low clearance, low ceiling heights or where fixture
weights must be minimized
• Typical applications include:
— Chemical plants
— Petrochemical facilities
— Oil refineries
— Pulp and paper mills
— Processing plants
— Drilling rigs
— Foundries
— Waste and sewage treatment
— Mining
— Steel mills
MMAD-CHVS
Features
• Available for use with all Mercmaster LED Low Profile
Luminaires
• Mercmaster LED Low Profile provides a seamless transition
from HID to LED technology by maintaining the same look and
feel as the HID counterpart for HID wattages up to 175W.
• Compact adapter design maintains luminaires compact light
weight low profile for low mounting heights.
• Easy, fast installation with no loose parts.
• Labor savings; no need to pull new wires.
• Casted opening for safety cable connection.
• Standard adapter is compatible with ceiling and pendant
mounting hoods:
— Crouse-Hinds— APM2, APM3, HPM2, CM2, and CM3
• Offset adapter is compatible with stanchion and wall mounting
hoods:
— Crouse-Hinds: TWM2, TWM3, JM5, PM5 and QM25.
• Hinge has high lip for added safety during installation
and servicing. Hinge and bolt construction assures 360°
compression at all points on fixture housing gasket for positive
sealing. Swing away design of captive bolt and nut simplifies
servicing.
• Mercmaster LED Low Profile’s four replaceable globe
alternatives provide uniform illumination where it is needed.
MMAD-CHVA
NEC/CEC Certifications and Compliances
• UL Standard: UL 50; UL 844, UL 1598, UL 1598A, UL 8750
• CSA Standard: C22.2 No 0; C22.2 No. 0.4; C22.2 No. 0.5; C22.2
No. 94; C22.2 No. 60529; C22.2 No. 137;
C22.2 No. 250.0
• ANSI/IEC Standard: 60529
• CSA: 70072210
• Master Contract: 164460
• Mercmaster LED Low Profile is DLC Qualified Products Listed
Standard Materials
• Adapters are cast copperfree (4/10 of 1% max.) aluminum
Standard Finishes
• Gray epoxy powder coat finish, electrostatically applied for
complete uniform protection
Related Products
• Mercmaster LED Low Profile Luminaires
 Crouse-Hinds is a registered trademarks of Cooper Crouse-Hinds
Visit our website at www.appletongroup.com or contact us at (800) 621-1506.
© March 2017
1
Mounting Adapters for Mercmaster™ LED Low Profile
NEC/CEC:
Class I, Division 2, Groups A, B, C, D
Class I, Zone 2 Group IIC
Class II, Division 1, Groups E, F, G
NEC/CEC:
Class II Division 2, Groups F, G
Class III
Simultaneous Exposure
Type 3R, 4, 4X
Crouse-Hinds Mounting Hood
Family
APM2/3 - Pendant
CM2/3 - Ceiling
HPM2 - Flexible Pendant
Champ
Crouse-Hinds Mounting Hood
Family
TWM2/3 - Wall
JM5 - 25° Angle Stanchion
PM5 - 90° Straight Stanchion
Champ
NEC/CEC:
IP66
Suitable For Use In Wet Locations
Marine Outside Type (Salt Water For USA ONLY)
Appleton Adapter Catalog Number
MMAD-CHVS
Appleton Adapter Catalog Number
MMAD-CHVA
 Crouse-Hinds is a registered trademarks of Cooper Crouse-Hinds
2
Visit our website at www.appletongroup.com or contact us at (800) 621-1506.
© March 2017
Mounting Adapters for Mercmaster™ LED Low Profile
NEC/CEC:
Class II Division 2, Groups F, G
Class III
Simultaneous Exposure
Type 3R, 4, 4X
NEC/CEC:
IP66
Suitable For Use In Wet Locations
Marine Outside Type (Salt Water For USA ONLY)
Dimensions in Millimeters (Inches)
248.7
(9.79)
387.9
(15.27)
437.4
(17.22)
235.5
(9.25)
175.8
(6.92)
306.0
(12.05) Dia.
306.0
(12.06) Dia.
25° Stanchion Mount
90° Stanchion Mount
430.8
(16.96)
277.6
(10.93)
103.1
(4.06)
176.8
(6.96)
201.4
(7.93)
341.1
(13.43) Dia.
Wall Mount
Ceiling Mount
154.4
(6.08)
341.1
(13.43)
158.0
(6.22)
DEPENDING ON
LENGTH OF
CONDUIT USED
Dia.
266.5
(10.49)
341.1
(13.43)
Dia.
Pendant Mount
Pendant Cone Mount
Weight kg (lb)
Catalog Number
0.9 (2.00)
MMAD-CHVS
0.9 (2.00)
MMAD-CHVA
Visit our website at www.appletongroup.com or contact us at (800) 621-1506.
© March 2017
3
Lighting/LED/Floodlights: NEC/CEC, ATEX/IECEx Enclosed and Gasketed
NEC/CEC:
Class I, Division 2, Groups A, B, C, D
Class I, Zone 2 Group IIC
Class II, Division 1, Groups E, F, G
Download PDF