Step 1
CONTENTS
PREP THE BACKPLATE
INTEL
INTEL
LGA 1155/1156
x4
LGA 2011
If using LGA 2011, skip to step 3.
Screws K attach directly
into the CPU socket studs.
(No backplate needed)
INTEL
LGA 1366
J
ADHERE BACKPLATE TO REAR OF MOTHERBOARD
Line up inserts with
holes on back of
motherboard.
Step 3
INTEL
PREP METAL RETENTION KIT
Use J
for LGA 1155,
1156, & 1366
Snap top and
bottom plastic
inserts together on
either side of ring.
D
B
x2
K
x4
F x4
H
E x4
G x4
I
Snap threaded metal
inserts into place.
L
F
Step 5
INTEL
MOUNT RADIATOR & FAN TO CHASSIS
Step 6
INTEL
a. ATTACH PUMP TO MOTHERBOARD
b. TIGHTEN SCREWS IN AN “X” PATTERN
Use K
for LGA2011
TOP VIEW
Step 7
INTEL
CONNECT FAN TO PUMP FAN OUTPUT CABLE
Step 8
INTEL
CONNECT PUMP POWER CABLE
2
G
I
x4
a. ATTACH RETENTION RING B TO PUMP
b. SNAP RETAINING CLIP L TO THE
RETENTION RING, LOCKING RING TO
PUMP
J or K
H
E
Step 4
INTEL
B
A
C
A
Step 2
INTEL
4
L
TOP VIEW
3
Use OUTER
configuration
for LGA 1366
& LGA 2011
Use INNER
configuration
for LGA 1155, &
LGA 1156
1
Plug pump power cable
into CPU fan header
on motherboard.
Step 1
PREP THE BACKPLATE
AMD
Note: Remove stock AMD
retention bracket first.
C
This page is intentionally left blank for customer
product identification and branding.
Step 2
AMD
ADHERE BACKPLATE TO REAR OF MOTHERBOARD
Line up inserts with
holes on back of
motherboard.
Step 3
AMD
PREP METAL RETENTION KIT
a. ATTACH RETENTION RING D TO PUMP
b. SNAP RETAINING CLIP L TO THE
RETENTION RING, LOCKING RING TO
PUMP
Step 5
AMD
MOUNT RADIATOR & FAN TO CHASSIS
Step 6
AMD
a. ATTACH PUMP TO MOTHERBOARD
b. TIGHTEN SCREWS IN AN “X” PATTERN
Step 7
AMD
CONNECT FAN TO PUMP FAN OUTPUT CABLE
Step 8
AMD
CONNECT PUMP POWER CABLE
2
D
J
G
E
4
H
L
I
F
Snap threaded metal
inserts into place.
Step 4
AMD
Snap top and
bottom plastic
inserts together on
either side of ring.
TOP VIEW
3
Use OUTER
configuration for
AM2, AM2+,
AM3, & AM3+
1
Plug pump power cable
into CPU fan header
on motherboard.
Download PDF