Windows XP and Earlier Versions Installation Instructions

Windows XP and Earlier Versions
Installation Instructions
For Vista / Windows 7
(Please make sure you have an internet connection)
instructions see other side
1 Remove cap. Insert My Magic Tech into one of your computer’s USB ports.
2 Click OK to run My Magic Tech (For Windows Vista please see other side).
An activation window will appear. Fill in the blanks with the following:
License I.D.:
Password:
3 Please wait while My Magic Tech loads. Click on “I Agree to Terms & Conditions”. You are now ready to use My Magic Tech.
NOTE: (1)The 1st time you install My Magic Tech you may be asked to reboot your computer, Click cancel (2)When shutting down or rebooting your PC, safely remove My Magic Tech
(see FAQ’s section) Windows Vista and Windows 7
Installation Instructions
(Please make sure you have an internet connection)
1 Remove cap. Insert My Magic Tech into one of your computer’s USB ports.
2 An autoplay menu will open. Left-click on “Open Folder To View Files”. Right-click on file labeled “Load”. Left-click on “Run As Administrator”.
*A security window alert will appear, left-click “Allow”. An activation window will appear. Fill in the blanks using Activation Code and Password on other side.
3 Please wait while My Magic Tech loads. Click on “I Agree to Terms & Conditions”. You are now ready to use My Magic Tech.
866.592.2426
www.mymagictech.com
NOTE: (1)The 1st time you install My Magic Tech you may be asked to reboot your computer, Click cancel (2)When shutting down or rebooting your PC, safely remove My Magic Tech
(see FAQ’s section) 
Download PDF