Oracle Database Quick Installation Guide for Microsoft Windows x64

Oracle® Database
Quick Installation Guide
11g Release 2 (11.2) for Microsoft Windows x64 (64-Bit)
E49703-03
January 2015
This guide describes how to quickly install the Oracle Database product on Windows
x64 systems. It includes information about the following:
1.
Review Information About this Guide
2.
Log On to the System with Administrator Privileges
3.
Check the Hardware Requirements
4.
Check the Software Requirements
5.
Default Share Configuration Requirement
6.
Web Browser Support
7.
Installation Consideration on Windows Vista, Windows Server 2008, and Later
8.
Install the Oracle Database Software
9.
Installing Oracle Database Examples
10. What to Do Next?
11. Additional Information
12. Documentation Accessibility
1 Review Information About this Guide
This guide describes how to install Oracle Database using the default installation
options into a new Oracle home.
Tasks Described in this Guide
The procedures in this guide describe how to:
■
■
■
Configure your system to support Oracle Database.
Install Oracle Database software on a local file system by using the Typical
installation method.
Configure a general-purpose Oracle database that uses the local file system for
database file storage.
Results of a Successful Installation
After you successfully install Oracle Database:
■
The database that you created and the default Oracle Net listener process run on
the system.
1
■
Oracle Enterprise Manager Database Control is running and can be accessed using
a Web browser.
Tasks Not Described in this Guide
This guide covers the Typical Installation scenario and does not describe how to
complete the following tasks:
■
■
Using the Advanced Installation option to install the software, such as silent or
response file installation.
Installing the software on a system that has an existing Oracle software
installation.
■
Installing Oracle Clusterware and Oracle Real Application Clusters.
■
Cloning an Oracle home.
■
Enabling Enterprise Manager e-mail notifications or automated backups.
■
Using alternative storage options such as Oracle Automatic Storage Management.
■
Installing and configuring Oracle Grid Infrastructure, for example, Oracle ASM.
Where to Get Additional Installation Information
For more detailed information about installing Oracle Database components,
including information about the tasks not described in this guide, see one of the
following guides:
■
■
■
If you are installing the software on a single system, then see Oracle Database
Installation Guide for Microsoft Windows.
If you want to install Oracle Grid Infrastructure for a standalone server, then see
the "Oracle Grid Infrastructure" chapter in Oracle Database Installation Guide for
Microsoft Windows.
If you are installing Oracle Real Application Clusters, then see Oracle Grid
Infrastructure Installation Guide and Oracle Real Application Clusters Installation
Guide. These guides describe how to install Oracle Grid Infrastructure and Oracle
Real Application Clusters. Oracle Grid infrastructure is a prerequisite for Oracle
Real Application Clusters installations.
The product documentation for Oracle Database products is available in both HTML
and PDF formats online on the Oracle Technology Network (OTN) website:
http://www.oracle.com/technetwork/indexes/documentation/index.html
For information about installing Oracle Database examples, see Oracle Database
Examples Installation Guide.
2 Log On to the System with Administrator Privileges
Log on as a member of the Administrators group to the computer on which you want
to install Oracle components. If you are installing on a Primary Domain Controller
(PDC) or a Backup Domain Controller (BDC), log on as a member of the Domain
Administrators group.
2
3 Check the Hardware Requirements
Table 1
Hardware Requirements
Requirement
Minimum Value
Physical memory (RAM)
1 GB minimum
On Windows 7, Windows 8, and Windows 8.1, 2 GB
minimum
Virtual memory
If physical memory is between 2 GB and 16 GB,
then set virtual memory to 1 times the size of the
RAM
■
If physical memory is more than 16 GB, then set
virtual memory to 16 GB
■
Disk space
Total: 5.39 GB
See Table 2 for details.
Processor Type
AMD64, or Intel Extended memory (EM64T)
Video adapter
256 colors
Screen Resolution
1024 X 768 minimum
3.1 Hard Disk Space Requirements
This section lists system requirements for Windows platforms that use the NT File
System (NTFS). Oracle strongly recommends that you install the Oracle database
home (Oracle database binaries, trace files, and so on) on Oracle ACFS or NTFS; the
database files themselves must be placed on Oracle ASM if using Oracle ACFS;
otherwise they can be placed on NTFS. Usage of Oracle ACFS and Oracle ASM or
NTFS instead of FAT32 is recommended to ensure security of these files.
The NTFS system requirements listed in this section are more accurate than the hard
disk values reported by the Oracle Universal Installer Summary window. The
Summary window does not include accurate values for disk space, the space required
to create a database, or the size of compressed files that are expanded on the hard
drive.
The hard disk requirements for Oracle Database components include 32 MB to install
Java Runtime Environment (JRE) and Oracle Universal Installer on the partition where
the operating system is installed. If sufficient space is not detected, installation fails
and an error message appears.
Table 2 lists the space requirements on NTFS. The starter database requires 720 MB of
disk space. The figures in this table include the starter database. FAT32 space
requirements are slightly higher.
Table 2
Disk Space Requirements on NTFS
Installation Type
TEMP
Space
C:\Program
Files\Oracle
Oracle
Home
Datafiles *
Total
Typical Install
500 MB
4.0 MB
3.80 GB
1.9 GB
6.22 GB
* Refers to the contents of the admin, cfgtoollogs, flash_recovery_area, and
oradata directories in the ORACLE_BASE directory.
3
** This size can be higher depending on the installation options selected, such as
languages or additional components. If you choose to install Oracle Database with
automated backups enabled, include at least 2 GB extra for data file disk space.
"NTFS File System and Windows Registry
Permissions" in Oracle Database Platform Guide for
Microsoft Windows
See Also:
To ensure that the system meets these requirements, follow these steps:
1.
Determine the physical RAM size. For example, on a Windows Server 2003
computer, double-click System in the Windows Control Panel and click the
General tab.
On a Windows Server 2008 R2 computer, click System and Security in the
Windows Control Panel, then click System.
If the size of the physical RAM installed in the system is less than the required
size, then you must install more memory before continuing.
2.
Determine the size of the configured virtual memory (also known as paging file
size). For example, on a Windows 2003 computer, double-click System, click the
Advanced tab, and click Settings in the Performance section. Then click the
Advanced tab.
On a Windows Server 2008 R2 computer, click System and Security, then click
System, click Advanced System Settings, click the Advanced tab on System
Properties page, and then click Settings in the Performance section. Then select
the Advanced tab on Performance Options page.
The virtual memory is listed in the Virtual Memory section.
If necessary, see your operating system documentation for information about how
to configure additional virtual memory.
3.
Determine the amount of free disk space on the system. For example, on a
Windows 2003 computer, double-click My Computer, right-click the drive where
the Oracle software is to be installed, and select Properties.
On a Windows Server 2008 R2 computer, right-click My Computer and click
Open.
4.
Determine the amount of disk space available in the temp directory. This is
equivalent to the total amount of free disk space, minus what is needed for the
Oracle software to be installed.
If there is less than 500 MB of disk space available in the temp directory, then first
delete all unnecessary files. If the temp disk space is still less than 500 MB, then set
the TEMP or TMP environment variable to point to a different hard drive.
For example, to change the environment variables on a Windows Server 2003
computer, double-click System, click the Advanced tab, and click Environment
Variables.
On a Windows Server 2008 R2 computer, click System and Security, then click
System, click Advanced System Settings, click the Advanced tab on System
Properties page, and then click Environment Variables.
4
4 Check the Software Requirements
Table 3 lists the software requirements for Oracle Database.
Table 3
Software Requirements
Requirement
Value
System
Architecture
Processor: AMD64, and Intel EM64T
Note: Oracle provides limited certification for 32-bit Oracle Database
Client on 64-bit Windows x64. For additional information, visit My
Oracle Support (formerly OracleMetaLink) at
https://support.oracle.com/
Operating
System
Oracle Database for Windows x64 is supported on the following
operating systems:
■
Windows Server 2003 - all x64 editions
■
Windows Server 2003 R2 - all x64 editions
■
Windows XP Professional x64 Edition
■
Windows Vista x64 - Business, Enterprise, and Ultimate editions
■
■
Windows Server 2008 x64 - Standard, Enterprise, Datacenter, and
Web editions.
Windows Server 2008 R2 x64 - Standard, Enterprise, Datacenter,
Web, and Foundation editions.
■
Windows 7 x64 - Professional, Enterprise, and Ultimate editions
■
Windows 8 x64 - Pro and Enterprise editions
■
Windows 8.1 x64 - Pro and Enterprise editions
■
Windows Server 2012 x64 and Windows Server 2012 R2 x64 Standard, Datacenter, Essentials, and Foundation editions
Windows Multilingual User Interface Pack is supported.
The Server Core option is not supported for all Windows Server
operating systems.
Note: For information about Hyper-V support, visit My Oracle
Support (formerly OracleMetaLink) at
https://support.oracle.com/epmos/faces/DocumentDisplay?id=1
563794.1
5
Table 3 (Cont.) Software Requirements
Requirement
Value
Compiler
Pro*Cobol has been tested and certified with Net Express 5.0.
The following components are supported with the Microsoft Visual
C++ .NET 2005 8.0, Microsoft Visual C++ .NET 2008 9.0, and Intel
10.1 C compilers:
■
Oracle Call Interface
■
External callouts
■
Pro*C/C++
■
XDK
Oracle C++ Call Interface is supported with
■
■
■
Network
Protocol
Microsoft Visual C++ .NET 2005 8.0
Microsoft Visual C++ .NET 2008 9.0 - OCCI libraries are installed
under ORACLE_HOME\oci\lib\msvc\vc9. When developing OCCI
applications with MSVC++ 9.0, ensure that the OCCI libraries
are correctly selected from this directory for linking and
executing.
Intel 10.1 C++ compiler with Microsoft Visual C++ .NET 2005
STLs.
The Oracle Net foundation layer uses Oracle protocol support to
communicate with the following industry-standard network
protocols:
■
TCP/IP
■
TCP/IP with SSL
■
Named Pipes
5 Default Share Configuration Requirement
The prerequisite checks during Oracle Database installation require that the system
drive on your computer has default share configured on it. Use the net use command
to verify, for example:
C:\>net use \\hostname\c$
The command completed successfully.
Ensure that the current user, the user in the Administrator group, has all the privileges
on the default share.
6 Web Browser Support
You do not require a web browser to install Oracle Database. However, web browsers
are required to access documentation, and to use Oracle Enterprise Manager Database
Control and Oracle Application Express. Web browsers must support JavaScript, and
the HTML 4.0 and CSS 1.0 standards.
Oracle Enterprise Manager supports the following browsers:
■
Netscape Navigator 9.0
■
Netscape Navigator 8.1
■
Microsoft Internet Explorer 10.0 (supports Oracle Enterprise Manager Database
Control 11.2.0.3 or higher)
6
■
Microsoft Internet Explorer 9.0
■
Microsoft Internet Explorer 8.0
■
Microsoft Internet Explorer 7.0 SP1
■
Microsoft Internet Explorer 6.0 SP2
■
Firefox 21.0 (supports Oracle Enterprise Manager Database Control 11.2.0.4)
■
Firefox 17.0.6 ESR (supports Oracle Enterprise Manager Database Control 11.2.0.4)
■
Firefox 3.6
■
Firefox 3.5
■
Firefox 3.0.7
■
Firefox 2.0
■
Safari 4.0.x
■
Safari 3.2
■
Safari 3.1
■
Google Chrome 27.0 (supports Oracle Enterprise Manager Database Control
11.2.0.4)
■
Google Chrome 4.0
■
Google Chrome 3.0
Oracle Application Express Installation Guide for a list of
browsers supported with Oracle Application Express
See Also:
7 Installation Consideration on Windows Vista, Windows Server
2008, and Later
On Windows Vista, Windows Server 2008, and later versions command prompts
should be opened with Administrator privileges.
8 Install the Oracle Database Software
To install the Oracle Database software:
Note: If you run Oracle Universal Installer when the Windows
Scheduler jobs are running, then you may encounter unexplained
installation problems if your Windows Scheduler job is performing
cleanup, and temporary files are deleted before the installation is
finished. Oracle recommends that you complete installation before the
Windows Scheduler jobs are run, or disable Windows Scheduler jobs
that perform cleanup of temporary files until after the installation is
completed.
1.
Log on as a member of the Administrators group for the computer on which you
want to install Oracle components.
If you are installing on a Primary Domain Controller (PDC) or a Backup Domain
Controller (BDC), log on as a member of the Domain Administrators group.
7
2.
If you are installing Oracle Database on a multihomed computer or a computer
that uses multiple aliases, use the System in the Control Panel to create the
ORACLE_HOSTNAME system environment variable. Set this variable to point to the
host name of the computer on which you are installing Oracle Database.
3.
Insert Oracle Database installation media and navigate to the database\ directory.
Alternatively, navigate to the directory where you downloaded or copied the
installation files.
Use the same installation media to install Oracle Database on all supported
Windows platforms.
4.
Double-click setup.exe to start Oracle Universal Installer.
Downloading Updates Before Installation
Starting with Oracle Database 11g Release 2 (11.2.0.2), if you plan to run the
installation in a secured data center, then you can download updates before
starting the installation by starting Oracle Universal Installer on a system that has
Internet access in update download mode. To start Oracle Universal Installer to
download updates before installation, enter the following command:
setup.exe -downloadUpdates
Provide the My Oracle Support user name and password, and provide proxy
settings if needed on the Provide My Oracle Support credentials screen. Then,
enter the Download location and click Download on the Download software
updates screen. If updates are available, then they are downloaded in the location
provided. The Finish Updates screen shows the successful download of the
updates. Click Close.
After you download updates, transfer the update file to a directory on the server
where you plan to run the installation.
5.
Follow these guidelines to complete the installation:
■
■
■
Do not install Oracle Database 11g Release 2 (11.2) software into an existing
Oracle home.
Follow the instructions displayed in the Oracle Universal Installer screens. If
you need additional information, click Help.
When prompted for a password, follow these guidelines.
The installation does not continue if the following requirements are not met:
–
Password cannot exceed 30 characters.
–
Password cannot contain invalid characters: ! @ % ^ & * ( ) + = \ | ` ~ [ { ] }
;:'",<>?
–
A user name cannot be a password.
–
An empty password cannot be accepted.
–
The SYS account password cannot be change_on_install.
(case-insensitive)
–
The SYSTEM account password cannot be manager. (case-insensitive)
–
The SYSMAN account password cannot be sysman. (case-insensitive)
–
The DBSNMP account password cannot be dbsnmp. (case-insensitive)
8
–
If you choose to use the same password for all the accounts, then that
password cannot be change_on_install, manager, sysman, or dbsnmp.
(case-insensitive)
Note: You must remember the passwords that you
specify.
■
■
■
Do not modify the Java Runtime Environment (JRE) except by using a patch
provided by Oracle Support Services. Oracle Universal Installer automatically
installs the Oracle-supplied version of the JRE. This version is required to run
Oracle Universal Installer and several Oracle assistants.
If you encounter errors while installing or linking the software, see Appendix
F in Oracle Database Installation Guide for Microsoft Windows for information
about troubleshooting.
If you chose an installation type that runs Database Configuration Assistant in
interactive mode, you must provide detailed information about configuring
your database and network.
If you need help when using the Database Configuration Assistant in
interactive mode, click Help on any screen.
Note: If you chose a default installation, Database
Configuration Assistant does not run interactively.
6.
When the Configuration Assistant tasks are complete, click Finish, click Exit, then
click Yes to exit from Oracle Universal Installer.
7.
Optionally, delete the OraInstalldate_time directory to remove the temporary
files that were created during the installation process. The OraInstalldate_time
directory holds about 45 MB of files. This directory is created in the location set by
the TEMP environment variable setting.
Restarting your computer also removes the OraInstalldate_time directory.
8.
See Chapter 5 in Oracle Database Installation Guide for Microsoft Windows for
information about postinstallation tasks that you must complete after you have
installed Oracle Database.
The following table lists the various screens displayed during an Enterprise Edition
installation for Oracle Database 11g Release 2 (11.2):
Screen
Recommended Action
Configure Security Updates
Enter your e-mail address, preferably your My Oracle Support (formerly OracleMetaLink) e-mail address or user name in the Email
field.
You can select the I wish to receive security updates via My Oracle Support check box to receive security updates.
Enter your My Oracle Support (formerly OracleMetaLink) password in the My Oracle Support Password field.
Click Next.
9
Screen
Recommended Action
Download Software Updates
Starting with Oracle Database 11g Release 2 (11.2.0.2), you can use
the Software Updates feature to dynamically download and apply
latest updates. Select one of the following options, and click Next:
■
Use My Oracle Support credentials for download: Select this
option to download and apply the latest software updates.
Click Proxy Settings to configure a proxy for Oracle Universal
Installer to use to connect to the Internet. Provide the proxy
server information for your site, along with a user account
that has access to the local area network through which the
server is connecting. Starting with Oracle Database 11g
Release 2 (11.2.0.3), you can enter the Proxy Realm
information if required. The proxy realm information is
case-sensitive.
Click Test Connection to ensure that your proxy settings are
correctly entered, and the installer can download the updates.
Apply Software Updates
■
Use ppre-downloaded software updates: Select this option if
you have already downloaded software updates using the
Oracle Universal installer command setup.exe
-downloadUpdates.
■
Skip software updates: Select this option if you do not want to
apply any updates.
This screen is displayed if you select to download the software
updates or provide the pre-downloaded software updates location.
If you selected Use My Oracle Support credentials for download in
the previous screen, select Download and apply all updates, and
then click Next to apply the updates.
By default, the download location for software updates is placed in
the home directory of the Oracle installation owner you are using
to run this installation. If you choose to download the software
updates in another location, then click Browse and select a different location on your server.
If you selected Use pre-downloaded software updates in the previous screen, select Apply all updates, and then click Next to apply
the updates downloaded before starting the installation.
Select Installation Option
System Class
Select Create and configure a database from the following list of
available options, then click Next:
■
Create and configure a database: This option creates a new
database along with sample schemas.
■
Install database software only: This option installs only the
database binaries. To configure database, you must run Oracle
Database Configuration Assistant after the software
installation.
■
Upgrade an existing database: This option installs the
software binaries in a new Oracle home. At the end of the
installation, you can upgrade the existing database.
Select the type of system for installing the database, click Next.
■
Desktop Class: Choose this option if you are installing on a
laptop or desktop class system. This option includes a starter
database and allows minimal configuration. This option is
designed for those who want to get up and running with the
database quickly.
■
Server Class: Choose this option if you are installing on a
server class system, such as what you would use when
deploying Oracle in a production data center. This option
allows for more advanced configuration options. Advanced
configuration options available using this option include
Oracle RAC, Oracle Automatic Storage Management, backup
and recovery configuration, integration with Enterprise
Manager Grid Control, and more fine-grained memory
tuning, among many others.
10
Screen
Recommended Action
Grid Installation Options
Select the type of database installation you want to perform, click
Next.
■
Single instance database installation: This option installs the
database and the listener.
■
Oracle Real Application Clusters database installation: This
option installs Oracle Real Application Clusters.
■
Oracle RAC One Node database installation: This option
installs Oracle RAC One Node database.
Note: Oracle RAC One Node is only supported with Oracle
Clusterware.
Select Install Type
Typical Install Configuration
Select Typical Install as the installation type from the following
options, and then click Next:
■
Typical Install: This installation method is selected by default.
It lets you quickly install Oracle Database using minimal
input. It installs the software and optionally creates a
general-purpose database using the information that you
specify on this screen.
■
Advanced Install: This installation method enables to perform
more complex installations, such as creating individual
passwords for different accounts, creating specific types of
starter databases (for example, for transaction processing or
data warehouse systems), using different language groups,
specifying e-mail notifications, and so on.
Enter the following information according to your requirements:
Oracle base: The Oracle base path appears by default. You can
change the path based on your requirement.
Software location: In the Software location section, accept the
default value or enter the Oracle home directory path in which you
want to install Oracle components. The directory path should not
contain spaces.
Storage Type: Select File System, or Oracle Automatic Storage
Management as the database storage option.
Database file location: If you select File System as your storage
type, then click Browse and specify a database file location.
ASMSNMP Password: If you select Oracle Automatic Storage Management as your Storage Type, then specify the password for the
ASMSNMP user.
Database Edition: Select the database edition to install.
Global database name: Specify the Global Database Name using
the following syntax:
database_unique_name.db_domain
For example, sales.us.example.com
where:
■
database_unique_name is sales
■
db_domain is us.example.com
Administrative password: Enter the password for the privileged
database account.
Confirm Password: Reenter, and confirm the password for the privileged database account.
Click Next to continue.
11
Screen
Recommended Action
Perform Prerequisite Checks
This option checks if the minimum system requirements to perform the database installation are met.
Click Fix & Check Again, if you want the installer to fix the problem and check the system requirements once more.
If you click Check Again, then you can run the prerequisite check
again to see if the minimum requirements are met to carry on with
the database installation.
To get a list of failed requirements, select Show Failed from the list.
To get a list of all the prerequirement checks run by the OUI, select
Show All. To get a list of the prerequirement checks that are successful, select Show Succeeded.
Note: Oracle recommends that you use caution in checking the
Ignore All option. If you check this option, then Oracle Universal
Installer may not confirm that your system can install Oracle Database successfully.
Summary
Review the information displayed on this screen, and then click
Install.
Note: Starting with Oracle Database 11g Release 2 (11.2), you can
save all the installation steps into a response file by clicking Save
Response File. Later, this file can be used for a silent installation.
Install Product
This screen displays the progress of a database installation. It also
shows the status information while the product is being installed.
Click Next.
This screen then displays the status information for the configuration assistants that configure the software and create a database.
When the message is displayed after Database Configuration Assistant process, click OK to continue.
Finish
This screen is shown automatically when all the configuration tools
are successful.
Click Close.
9 Installing Oracle Database Examples
If you plan to use the following products or features, then download and install the
products from the Oracle Database Examples media:
■
Oracle JDBC Development Drivers
■
Oracle Database Examples
■
Oracle Text Knowledge Base
For information about installing software and various Oracle product demonstrations
from the Oracle Database Examples media, see Oracle Database Examples Installation
Guide.
10 What to Do Next?
To become familiar with this release of Oracle Database, Oracle suggests that you
complete the following tasks:
■
Log in to Oracle Enterprise Manager Database Control using a Web browser.
Oracle Enterprise Manager Database Control is a Web-based application that you
can use to manage a single Oracle database. The default URL for Database Control
is:
http://host.domain:1158/em/
12
Log in with the user name SYS and connect as SYSDBA. Use the password that you
specified for this user during the Oracle Database installation.
■
■
■
See Chapter 5 of Oracle Database Installation Guide for Microsoft Windows for
information about required and optional postinstallation tasks, depending on the
components to use.
Review Chapter 6 of Oracle Database Installation Guide for Microsoft Windows for
information about how to get started using Oracle Database.
Read Oracle Database 2 Day DBA guide, to learn more about using Oracle
Enterprise Manager Database Control to administer a database.
This guide, designed for new Oracle DBAs, describes how to use Oracle Enterprise
Manager Database Control to manage all aspects of an Oracle database
installation. It also provides information about how to enable e-mail notifications
and automated backups, which you might not have configured during the
installation.
11 Additional Information
This section contains information about the following:
■
Product Licenses
■
Purchasing Licenses, Version Updates, and Documentation
■
Contacting Oracle Support Services
■
Locating Product Documentation
Product Licenses
You are welcome to install and evaluate the products included in this media pack for
30 days under the terms of the Trial License Agreement. However, you must purchase
a program license to continue using any product after the 30 day evaluation period.
See the following section for information about purchasing program licenses.
See Also:
Oracle Database Licensing Information
Purchasing Licenses, Version Updates, and Documentation
You can purchase program licenses and updated versions of Oracle products from the
Oracle Store Web site:
https://shop.oracle.com/
Contacting Oracle Support Services
If you have purchased Oracle Product Support, you can call Oracle Support Services
for assistance 24 hours a day, seven days a week. For information about purchasing
Oracle Product Support or contacting Oracle Support Services, go to the Oracle
Support Services Web site:
http://www.oracle.com/support/
Locating Product Documentation
Product documentation includes information about configuring, using, or
administering Oracle products on any platform. The product documentation for
Oracle Database 11g Release 1 (11.2) is available in both HTML and PDF formats on
Oracle Technology Network (OTN) at:
13
http://www.oracle.com/technetwork/indexes/documentation/index.html
12 Documentation Accessibility
For information about Oracle's commitment to accessibility, visit the Oracle
Accessibility Program website at
http://www.oracle.com/pls/topic/lookup?ctx=acc&id=docacc.
Access to Oracle Support
Oracle customers that have purchased support have access to electronic support
through My Oracle Support. For information, visit
http://www.oracle.com/pls/topic/lookup?ctx=acc&id=info or visit
http://www.oracle.com/pls/topic/lookup?ctx=acc&id=trs if you are hearing
impaired.
Oracle Database Quick Installation Guide, 11g Release 2 (11.2) for Microsoft Windows x64 (64-Bit)
E49703-03
Copyright © 1996, 2015, Oracle and/or its affiliates. All rights reserved.
This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected
by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate,
broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering,
disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.
The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them
to us in writing.
If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, then
the following notice is applicable:
U.S. GOVERNMENT END USERS: Oracle programs, including any operating system, integrated software, any programs installed on the hardware,
and/or documentation, delivered to U.S. Government end users are "commercial computer software" pursuant to the applicable Federal Acquisition
Regulation and agency-specific supplemental regulations. As such, use, duplication, disclosure, modification, and adaptation of the programs,
including any operating system, integrated software, any programs installed on the hardware, and/or documentation, shall be subject to license
terms and license restrictions applicable to the programs. No other rights are granted to the U.S. Government.
This software or hardware is developed for general use in a variety of information management applications. It is not developed or intended for use
in any inherently dangerous applications, including applications that may create a risk of personal injury. If you use this software or hardware in
dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy, and other measures to ensure its safe
use. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software or hardware in dangerous applications.
Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners.
Intel and Intel Xeon are trademarks or registered trademarks of Intel Corporation. All SPARC trademarks are used under license and are trademarks
or registered trademarks of SPARC International, Inc. AMD, Opteron, the AMD logo, and the AMD Opteron logo are trademarks or registered
trademarks of Advanced Micro Devices. UNIX is a registered trademark of The Open Group.
This software or hardware and documentation may provide access to or information about content, products, and services from third parties. Oracle
Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third-party content, products,
and services unless otherwise set forth in an applicable agreement between you and Oracle. Oracle Corporation and its affiliates will not be
responsible for any loss, costs, or damages incurred due to your access to or use of third-party content, products, or services, except as set forth
in an applicable agreement between you and Oracle.
14
Download PDF