CE-LX5 Lynx™ Sensor Cables Specification Sheet

rev0_08.05.2016
PRODUCT DIMENSIONS
LYNX™SENSOR
CABLES
CABLE LENGTHS
Length must be longer than needed to assure
proper installation without tension on the lead
wire. Length specified at time of order.
CE‑LX5
CABLE ORDERING LENGTH
CABLE NO.
Lynx™ sensor cables are designed for use with
RJG, Inc. Lynx single and multi‑channel strain gage
or piezoelectric sensors and adapters, and the
RJG, Inc. eDART™ process control and monitoring
system.
11.8”
Straight Male/
0.3 m Straight Female
CE‑LX5‑0.3M‑F90
11.8”
0.3 m
CE‑LX5‑1M
39.4”
Straight Male/
1 m Straight Female
CE‑LX5‑1M‑F90
39.4”
1m
CE‑LX5‑2M
78.7”
Straight Male/
2 m Straight Female
CE‑LX5‑2M‑F90
78.7”
2m
250 V
Nominal Current
4A
Diameter
0.232”
5.9 mm
Max Temp
176 °F
80 °C
4‑Pin Straight Plug
End Connection
4‑Pin Straight or
90‑Degree Plug
† Product contains no user‑serviceable parts.
Straight Male/
90° Female
Straight Male/
90° Female
157.5”
Straight Male/
4 m Straight Female
CE‑LX5‑4M‑F90
157.5”
4m
CE‑LX5‑6M
236.2”
Straight Male/
6 m Straight Female
CE‑LX5‑6M‑F90
236.2”
6m
CE‑LX5‑12M
472.4”
Straight Male/
12 m Straight Female
CE‑LX5‑12M‑F90
472.4”
12 m
CABLE CONNECTORS
End Connection
Straight Male/
90° Female
CE‑LX5‑4M
CABLE DATA
Rated Voltage
FITTINGS
CE‑LX5‑0.3M
TECHNICAL SPECIFICATIONS
The lynx sensor cable is a polypropylene‑coated
cable suited for the heat and stress found in
injection molding environments.
LENGTH
Straight Male/
90° Female
Straight Male/
90° Female
Straight Male/
90° Female
RJG, INC. | www.rjginc.com | 231.947.3111
CABLE INSTALLATION
eDART™ END CONNECTION
LYNX DEVICE END CONNECTION
CE‑LX5
CE‑LX5‑F90
CABLE BEND
RADIUS=R
COMPATIBLE RJG, INC. PRODUCTS†
PRODUCT
DESCRIPTION
L‑SB‑127‑50/125/500/2000
Lynx Digital Strain Gage Indirect Cavity Pressure Sensors
LES‑B‑127‑50/125/500/2000
Lynx Embedded Strain Gage Indirect Cavity Pressure Sensors
LS‑H‑1/4NPT‑3K
Lynx 3000# Hydraulic Sensor
SG/LX1‑S
Lynx Standard Sensor Adapter for eDART
PZ/LX1‑S
Lynx Piezo Adapter for eDART
LP/LX1‑M
Mold Mount Piezo Adapter for eDART
J‑LX5‑CE
Five‑Port Lynx Junction Box for eDART
J‑LX9‑CE
Nine‑Port Lynx Junction Box for eDART
LE‑R‑50
Lynx 50” Stroke/Velocity Sensor for eDART
L‑PX
Lynx Proximity Switch Interface for eDART
RJG, INC. | www.rjginc.com | 231.947.3111
† Compatible products list is not all‑inclusive;
contact RJG, Inc. for further product compatibility.
Download PDF

advertising