FWM397
Quick start guide
What’s in the Box?
You should find these items upon opening the box.
1
FM antenna
Remote Control
AM antenna
2
Quic
User Man
1
k St
art
ual
Guid
e
Quick Start Gulde
User Manual
MP3 link cable
FWM397_78_QSG_Eng
1
AC power cord
4/28/08, 15:46
3
2
1
Connect the speaker cables.
Tip
2
See the User Manual on how to
connect other equipment to this
system.
Connect the AM and FM antennas.
3
Connect the power cable of the system.
AM antenna
2
FM antenna
AM ANTENNA
Speaker
(right)
Speaker
(left)
FM ANTENNA
AUX/CDR
R
IN
L
1
LOW CH
-
+
L
R
L
R
SPEAKERS 6Ω
3
AC power cord
Setup
Setting the clock
1 In standby or view clock mode, press CLOCK/TIMER (or CLOCK on the
remote control) once.
2
Press ALBUM/PRESET +/- (or ALBUM +/- (à / á) on the remote
control) to select clock mode.
3 Press CLOCK/TIMER (or CLOCK on the remote control) again to
activate and adjust clock time.
4 Press ALBUM/PRESET +/- (or ALBUM +/- (à / á) on the remote
control) repeatedly to set the hour.
5 Press S / T (or TITLE - / + (í /ë) on the remote control)
repeatedly to set the minute.
6 Press CLOCK/TIMER (or CLOCK on the remote control) again to store
the setting.
FWM397_78_QSG_Eng
2
4/28/08, 15:46
C
Enjoy
Playing a disc
2
Press OPEN•CLOSE to open the disc tray and load up to two
discs on the individual disc trays. To load the third disc, press DISC
CHANGE.
➜ Make sure the label side of each loaded disc is facing up.
1
1
2
2
Press OPEN•CLOSE again to close the disc tray.
3
Use DISC 1/2/3 (or CD 1/2/3 on the remote control) to select a
disc for playback.
4
To stop playback, press 9 .
Programming and tuning to radio
stations
1
Press TUNER repeatedly to select the tuner source.
2
Press PROG (or PROGRAM on the remote control) for more
than two seconds to program all available stations in order of
waveband.
3
Press ALBUM/PRESET +/- (or TITLE - / + (í /ë) on the
remote control) until the desired preset station is displayed.
FWM397_78_QSG_Eng
3
4/28/08, 15:46
1
C
Enjoy
Playing a USB mass storage device
With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1),
USB flash players (USB 2.0 or USB1.1), memory cards (requires an additional card reader to
work with this Hi-Fi system).
1
Insert the USB device’s USB plug into the socket
on the set.
2
Press USB to select the USB source.
3
Play the USB’s audio files as you do with the albums/tracks on a CD,
Ripping function
1
Insert a USB mass device with sufficient free space to the USB DIRECT
the set.
socket on
2
Prepare the source to record from.
3
Press USB RECORD to start ripping.
4
At any moment, simply press 9 to stop ripping.
Tip
Detailed playback features and additional functions are described in the
accompany owner's manual.
C Royal Philips Electronics N.V. 2008
All rights reserved.
http://www.philips.com
PDCC-ZYL-0816
FWM397_78_QSG_Eng
4
4/28/08, 15:46
Download PDF