DC INVERTER Air-Water heat pump for Heating and Cooling

DC INVERTER Air-Water heat pump
for Heating and Cooling
Residential environments
with the PLANT MANAGEMENT SYSTEM
INTEGRATED in the heat pump
GB 04
Ecoenergy
Ideas to install
The MIRAI-SMI heat pump
The state of the art heating pumps offered by EMMETI address the high requirements of comfort and maintenance costs efficiency.
MIRAI SMI is a heating pump designed and made in Japan to guarantee the best efficiency and reliability in air conditioning both during the
summer and winter seasons.
This heating pump unites compactness with completeness, as some of the components of the thermal system with the relative adjustment, are
already integrated in this unit.
Its wide arrange of possible configurations makes this the ideal unit for direct connection with various systems such as: cooling and heating
radiators, air thermal units (cassettes or fans), low temperature radiators and heating exchangers for DHW production.
This new system makes installation and system start up operations easier.. The supply type and extremely reduced consumptions also make it
compatible with the normal electric supply conditions foreseen by the manager, as it is dedicated to residential.
The home is easily and efficiently controlled by a remote control (optional) fitted on the machine, leaving the user to freely manage operating times
and temperatures, guaranteeing maximum comfort and minimum electric energy consumption.
To be added are the typical advantages of realising a thermal system with heat pumps, the possibility of cooling and heating the premises with one
single unit, greater product reliability in time, respect for the environment through the total elimination of the direct CO2 emissions, no charges for:
routine maintenance, realisation of gas adduction systems, discharge of combustion products giving improved safety.
The Range
55 °C
A++
A+
A
B
C
D
E
F
G
A+
05
05
05
kW
55 °C
35 °C
A ++
A++
A+
A
B
C
D
E
F
G
06
06
07
kW
A+
08
09
09
kW
35 °C
A ++
811/2013
2015
A++
A+
A
B
C
D
E
F
G
10
10
09
kW
62 dB
60 dB
2015
EH 1315 DC
EH 1015 DC
EH 0615 DC
EH 1615 DC
55 °C
35 °C
A++
A ++
11
11
12
kW
12
13
14
kW
62 dB
811/2013
2015
A++
A+
A
B
C
D
E
F
G
55 °C
35 °C
A++
A ++
12
13
13
kW
15
16
16
kW
62 dB
811/2013
2015
811/2013
Why choose the MIRAI-SMI Inverter Heat Pump
77%
7,7 kWh Air
23%
Power supply: 2,3 kWh
10 kWh
Components
 5

2
3
4

6
7

8
9




1 PCB-Main Electronic board
6 Safety valve
 Sensor of external air temperature
 “SMART MT”controller
7 Supply terminal block
 Heat exchanger (air)
3 PCB-Main display
8 Heat exchanger (water)
 Water flow connection to the system
4 PCB-Terminal Block
9 DC-Inverter compressor
 Base heater
System
 Water discharge valve
 Water return connection
5 Air vent valve
 Circulation pump
from the system
Accessories (supplied separately)
Remote control
(Crono TH)
Stainless AISI 304
water filter
Anti-vibrating flexible pipe
L = 20 cm
3-way diverter valve
(domestic hot water)
Set of antivibration
mounts
External air
temperature probe
Kit expansion tank for connection
to the distribution manifold
Topway in boxes Metalbox
Temperature probe
DHW
Integrated management system diagram
The integrated management of the thermal system and of the heat pump (HP) is implemented by means of an innovative SMART-MT regulator
therein. SMART-MT is connected to the management inputs of the heat pump and “PCB-Main” to a specific PCB-Terminal Block board, where
the various inputs and outputs of the parts constituting the system can be connected.
SMART-MT allows you to customise residential comfort, based on the various requirements of the use of energy sources and terminal units.
In addition to the normal controls concerning the operating mode and status of the HP, all parameters relating to system management algorithms
can be set using SMART-MT.
To complete the functions present in SMART-MT, it is possible to connect the PCB-Terminal Block with a “Crono-TH” remote control (optional
accessory), which aside from controlling the temperature and humidity of the main room in the home, allows you to set periods of attenuation of
environmental comfort, to activate the main states and operating modes of the HP and to provide the main SMART-MT displays.
Topway
Manifold
Crono TH
Mirai SMI
Heat pump
Topway
Manifold
Silence THIN-WALL
Fan coil
ETW
Inertial tank
CLIMA
Silence THIN
Fan coil
Floor circuits
Emmeti Clima Floor
Heating unit
Day zone
Night zone
Technical data
Model
APPLICATION WITH TERMINAL AIR UNITS
Heating capacity nom
A7 W45
kW
Power input nom
A7 W45
kW
COP
A7 W45
Heating capacity nom
A-7 W45
kW
Power input nom
A-7 W45
kW
COP
A-7 W45
Cooling capacity nom
A35 W7
kW
Power input nom
A35 W7
kW
EER
A35 W7
ESEER
A35 W7
Useful pressure head for pump
A35 W7
kPa
APPLICATION WITH RADIANT PANELS
Heating capacity nom
A7 W35
kW
Power input nom
A7 W35
kW
COP
A7 W35
Heating capacity nom
A-7 W35
kW
Power input nom
A-7 W35
kW
COP
A-7 W35
Cooling capacity nom
A35 W18
kW
Power input nom
A35 W18
kW
EER
A35 W18
APPLICATION WITH LOW-TEMPERATURE RADIATORS
Heating capacity nom
A7 W55
kW
Power input nom
A7 W55
kW
COP
A7 W55
Heating capacity nom
A-7 W55
kW
Power input nom
A-7 W55
kW
COP
A-7 W55
EH0615DC
EH1015DC
EH1315DC
EH1615DC
6,60
2,00
3,30
3,45
1,73
2,00
3,90
1,39
2,80
4,72
77
9,75
2,79
3,50
6,90
3,29
2,10
6,70
2,44
2,75
5,37
56
12,80
3,58
3,58
9,10
4,03
2,26
10,50
3,05
3,44
5,86
84
17,40
5,12
3,40
11,00
4,91
2,24
13,00
4,02
3,23
5,79
82
6,85
1,61
4,25
4,45
1,59
2,80
5,30
1,38
3,85
9,98
2,22
4,50
7,20
2,67
2,70
9,00
2,46
3,66
13,50
2,95
4,57
9,60
3,50
2,74
14,30
3,19
4,48
20,00
4,28
4,10
11,60
4,88
2,71
16,80
4,13
4,07
6,20
2,31
2,68
3,60
2,12
1,70
9,35
3,34
2,80
5,70
3,41
1,67
11,70
3,99
2,93
8,30
4,37
1,90
14,60
5,00
2,92
9,10
4,89
1,86
A++ (A++)
A++ (A++)
62
62
5,5
25,3
5,6
25,3
2,99
1”1/4
3
1024
1418
356
119
2,99
1”1/4
3
1024
1418
356
119
APPLICATION AT MEDIUM (LOW) TEMPERATURE ACCORDING THE REGULATIONS EU N° 811-813/2013
Seasonal space heating
A+ (A++)
A+ (A++)
energy efficiency class
Sound power
60
62
Power supply
Absorbed max power
Maximum current
Type of compressor
Refrigerant R410
Water fittings
Max hydraulic operating pressure
Width
Height
Depth
Weight
230V~ 50Hz
kW
A
2,5
11,2
3,5
17,5
kg
Ø
bar
mm
mm
mm
kg
1,05
3/4”
3
898
675
315
52
1,72
1”
3
871
882
355
74
Twin Rotary
Data referred to the following conditions:
A35 W18 Air: 35 °C - Water: 18/23 °C
A35 W7 Air: 35 °C - Water: 7/12 °C
A7 W35 Air: 7(6) °C - Water 30/35 °C
A-7 W35 Air: -7(-8) °C - Water G/35 °C. G=water flow same conditions A7 W35
A7 W45 Air: 7(6) °C - Water 40/45 °C
Working range
Maximum outdoor temperature
Maximum water temperature
Minimum outdoor temperature
Minimum water temperature
A-7 W45 Air: -7(-8) °C - Water G/45 °C. G=water flow same conditions A7 W45
A7 W55 Air: 7(6) °C - Water 47/55 °C
A-7 W55 Air: 7(-8) °C - Water G/55 °C. G=water flow same conditions A7 W55
E.S.E.E.R. (European Seasonal EER) European Seasonal average efficiency
Perfomances according to EN 14511:2013
Cooling mode
43 °C
23 °C
18 °C
6 °C
Heating mode
43 °C
60 °C
-20 °C
23 °C
Model EH0615DC
43
327
57
All rights are reserved. This publication nor any of its contents can be reproduced or publicized without Emmeti’s written authorization.
Dimensions
825
Water inlet connection 3/4”
73
15.3
300
42
54
CLIMA
388
659
Water outlet connection 3/4”
122,5
580
75
70
357
Model EH1015DC
16
122,5
155
540
155
850
Water outlet connection 1”
21
25
330
38
480
866
CLIMA
16
173
Water inlet connection 1”
Models EH1315DC - EH1615D
80
330
13
356
36
13
80
24
CLIMA
680
1418
Water outlet connection 1 1/4”
185
Water inlet connection 1 1/4”
205
590
205
EMMETI spa - Via Brigata Osoppo, 166 - 33074 Vigonovo frazione di Fontanafredda (PN) - Italy
Tel. 0434.567911 - Fax 0434.567901 - www.emmeti.com - info@emmeti.com
9 9 0 0 5 9 6 0 0 0 0 0 1 Rev. A - 05.2016 - Ufficio Pubblicità & Immagine - LP
1000
Download PDF