Full-size PICMG 1.0 CPU card supports LGA1150 Intel® Core™ i7/i5/i3,
Pentium® and Celeron® CPU per Intel® H81, DDR3, VGA/iDP, Dual
Intel® GbE, USB 3.0, SATA 6Gb/s, PCIe Mini, mSATA,
RS-232, HD Audio and RoHS
WSB-H810
Quick Installation Guide
Version 1.0
Jul. 23, 2015.
Package List
WSB-H810 package includes the following items:
1 x WSB-H810 single board computer
2 x SATA cable
1 x One Key Recovery CD
1 x QIG (Quick Installation Guide)
1 x Utility CD
©2006 Copyright by IEI Integration corp.
All rights reserved.
1
Specifications
CPU:
4th generation LGA1150 Intel® Core™ i7/i5/i3, Pentium® or
Celeron® processor supported
Chipset: Intel® H81
Memory:
Twp 240-pin 1600/1333MHz dual-channel DDR3 & DDR3L
SDRAM unbuffered DIMMs support up to 16GB
BIOS: UEFI BIOS
Graphic Engine:
Intel® HD Graphics Gen 7.5 supports DX11.1 and OpenCL 1.2,
OpenGL 3.2 Full MPEG2, VC1, AVC Decode
Display Output:
Dual independent display
VGA (up to 1920x1200 @ 60 Hz)
iDP interface for HDMI, LVDS, VGA, DVI, DP (up to
3840x2160 @60 Hz)
Ethernet:
LAN1: Intel® I218-V Ethernet Controller
LAN2: Intel® I211-AT Ethernet Controller
Audio:
7.1 channel HD Audio supported by IEI AC-KIT-892HD kit
External I/O Interface:
2 x RJ-45
2 x USB 2.0
1 x VGA
Internal I/O Interface:
1 x IR (1x5 pin)
1 x KB/MS (1x6 pin)
1 x LPT (2x13 pin)
1 x RS-422/485 (1x4 pin, P=2.0)
2 x SATA 6Gb/s, 1 x SATA 3Gb/s (Intel® H81 supports AHCI,
2
no RAID)
1 x USB 2.0 (180 degree type A)
4 x USB 2.0 (2x4 pin, P=2.54)
2 x USB 3.0 (2x10 pin)
2 x RS-232 (2x5 pin, P=2.54)
Front Panel:
1 x Front panel (2x7 pin, Power LED, HDD LED, Speaker,
Power Button, Reset Button)
LAN LED: 2 x LAN LED (1x2 pin)
Digital I/O: 1 x 8-bit digital I/O (2x5 pin)
TPM: 1 x TPM (2x10 pin)
SMBus: 1 x SMBus (1x4 pin)
I2C: 1 x I2C (1x4 pin)
Expansion:
1 x mSATA (SATA 3Gb/s)
1 x PCIe Mini slot
PCI and ISA signal via golden finger
Watchdog Timer:
Software programmable support 1~255 sec. system reset
Fan Connector:
1 x CPU smart fan (1x4 pin)
1 x System smart fan (1x3 pin)
Power supply: 5V/12V, AT/ATX support
Power Consumption:
5V@3.4A, 12V@0.36A, Vcore_12V@7.48A, 3.3V@1.42A,
5VSB@0.13A (Intel® Core™ i7-4770K 3.90 GHz CPU with
8GB (two 4GB) 1333MHz DDR3 memory)
Storage Temperature: -30°C ~ 70°C
Operation Temperature: -20°C ~ 60°C
Operation Humidity: 5% ~ 95%, non-condensing
Dimensions: 338 mm x 122 mm
Weight GW/NW: 1000g / 260g
3
Ordering Information
WSB-H810-R10:
Full-size PICMG 1.0 CPU card supports LGA1150 Intel® Core™
i7/i5/i3, Pentium® and Celeron® CPU per Intel® H81, DDR3,
VGA/iDP, Dual Intel GbE, USB 3.0, SATA 6Gb/s, PCIe Mini,
mSATA, RS-232, HD Audio and RoHS
19800-000051-RS: Dual RS-232 cable, 230mm, P=2.54
32200-074800-RS: RS-422/485 cable, 200mm
19800-003100-100-RS: USB 2.0 cable, 300mm, P=2.54
19800-010500-200-RS: USB 3.0 cable 457mm with bracket
19800-000075-RS: KB/MS cable with bracket
32102-000100-200-RS:
SATA power cable, MOLEX 5264-4P to SATA15P
32200-015100-RS: LPT flat cable 28CM
CF-1150SE-R10:
Special cooler kit for LGA1150, high-performance compatible,
95W
CF-1150SC-R10:
Special cooler kit for LGA1150, 1U chassis compatible, 65W
CF-1150SB-R11:
Special cooler kit for LGA1150, high-performance compatible,
65W
CF-1150SF-R10:
Special cooler kit for LGA1150, high-performance compatible,
54W
DP-DVI-R10:
DisplayPort to DVI-D converter board (For iEi IDP connector)
DP-HDMI-R10:
DisplayPort to HDMI converter board (For iEi IDP connector)
DP-LVDS-R10:
DisplayPort to LVDS converter board (For iEi IDP connector)
DP-VGA-R10:
4
DisplayPort to VGA converter board (For iEi IDP connector)
DP-DP-R10:
DisplayPort to DisplayPort converter board (For iEi IDP connector)
AC-KIT-892HD-R10:
7.1 channel HD Audio kit with Realtek ALC892 support dual
audio streams
TPM-IN01-R11:
20-pin Infineon TPM module, software management tool,
firmware V3.17
5
Jumpers setting and connectors
LABEL
J_ATX_AT1
J_CMOS1
USB SW1 Power
USB SW2 Power
J_FLASH1
J_AUDIO1
CHASSIS1
CPU_FAN1
CPU12V1
DIO1
DP1
CN3
F_PANEL1
CN1
KB_MS1
LED_LAN1
LED_LAN2
LPT1
mSATA1
COM1, COM3,
COM4(Un-stuff),
COM5(Un-stuff)
COM2
SATA_1, SATA_2
SATA_3
CN2
JSPI1
JSPI2
SYS_FAN1
TPM1
USB2-4, USB2-5
USB3-1
FUNCTION
AT/ATX mode select switch
Clear CMOS button
USB power setting
Flash descriptor security override
Audio source connector
Chassis status connector
CPU fan connector
+12V power connector
Digital I/O connector
Display port connector
EC debug connector
Front panel connector
I2C Connector
Keyboard and mouse connector
LAN1 link LED connector
LAN2 link LED connector
Parallel port connector
M-SATA card connector(V1.01 move to botton
side)
RS-232 serial port connector
RS-422/485 serial port connector
SATA 6Gb/s drive connectors
SATA 3Gb/s drive connector
SMBUS connector
Flash SPI ROM connector
Flash EC ROM connector
System fan connector
TPM connector
Internal USB 2.0 connectors
Internal USB 3.0 connector
6
USB2-3
LAN1, LAN2
USB2-1, USB2-2
VGA1
J_AT1
IPMI1
USB2.0 Port Connector (type A)
RJ45 LAN connectors
External USB 2.0 ports
VGA connector
(Reserved) ATX simulated to AT mode.
Collocation IPMI Module(iRIS-2400)
J_ATX_AT1: AT/ATX mode select switch
PIN NO.
Short 1 - 2
Short 2 - 3
J_CMOS1: Clear CMOS button
PIN NO.
NC (default)
Press button
DESCRIPTION
ATX Mode (default)
AT Mode
DESCRIPTION
Keep CMOS Setup
(Normal Operation)
Clear CMOS Setup
USB SW1, USB SW2: USB power setting
PCIE x16
DESCRIPTION
+5V DUAL
5V DUAL (default)
+5V
+5V
Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc.
Chipset
Auto Power Button Status
[Disabled(ATX)]
Restore AC Power Loss
[Last State]
------------------
> PCI Express Configuration
> PCI Azalia Configuration
Power Saving Function(ERP)
[Disabled]
PCIEX16 Power
USB SW1
USB SW2
[1 x16 PCIE]
[+5V DUAL]
[+5V DUAL]
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
7
J_FLASH1: Flash descriptor security override
PIN NO.
DESCRIPTION
Short 1 - 2
Disabled (default)
Short 2 - 3
Enabled
J_AUDIO1: Audio source connector
PIN NO.
DESCRIPTION
PIN NO.
1
2
HDA_SYNC
3
4
HDA_SDOUT
5
6
HDA_SDIN
7
8
HDA_VCC
9
10
HDA_+12V
CHASSIS1: Chassis status connector
PIN NO.
DESCRIPTION
PIN NO.
1
+3.3VSB
2
CPU_FAN1: CPU fan connector
PIN NO.
DESCRIPTION
1
GND
3
FANIO
PIN NO.
2
4
CPU12V1: +12V power connector
PIN NO.
DESCRIPTION
PIN NO.
1
2
GND
3
4
+12V
DESCRIPTION
HDA_BIT_CLK
HDA_SPKR
HDA_RST#
HDA_GND
HDA_GND
DESCRIPTION
CHASSIS OPEN
DESCRIPTION
+12V
PWM
DESCRIPTION
GND
+12V
8
DIO1: Digital I/O connector
PIN NO.
DESCRIPTION
1
GND
3
Output 3
5
Output 1
7
Input 3
9
Input 1
DP1: Display port connector
PIN NO.
DESCRIPTION
1
+5V
3
LANE1P
5
LANE3N
7
GND
9
GND
11
AUXP
13
GND
15
LANE2N
17
LANE0P
19
+3.3V
CN3: EC debug connector
PIN NO.
DESCRIPTION
1
EC_EPP_STB#
3
EC_EPP_PD0
5
EC_EPP_PD1
7
EC_EPP_PD2
9
EC_EPP_PD3
11
EC_EPP_PD4
13
EC_EPP_PD5
15
EC_EPP_PD6
17
EC_EPP_PD7
PIN NO.
2
4
6
8
10
PIN NO.
2
4
6
8
10
12
14
16
18
PIN NO.
2
4
6
8
10
12
14
16
18
DESCRIPTION
VCC
Output 2
Output 0
Input 2
Input 0
DESCRIPTION
LANE1N
GND
LANE3P
AUX_CTRL_DET_D
HPD
AUXN
LANE2P
GND
LANE0N
DESCRIPTION
EC_EPP_AFD#
NC
EC_EPP_INIT#
EC_EPP_SLIN#
GND
NC
EC_EPP_BUSY
EC_EPP_KSI5
EC_EPP_KSI4
9
F_PANEL1: Front panel connector
PIN
DESCRIPTION
1
+5V
PWR
3
NC
LED
5
GND
7
PWRBTN_SW#
PWR
BTN
9
GND
11
+5V
HDD
LED
13
SATA_LED#
PIN
2
4
6
8
10
12
14
CN1: I2C Connector
PIN NO.
DESCRIPTION
1
3
DESCRIPTION
BEEP_PWR
NC
NC
PC_BEEP
NC
EXTRSTGND
DESCRIPTION
2
4
I2C_DAT
+5V
GND
I2C_CLK
LED_LAN1: LAN1 link LED connector
PIN NO.
DESCRIPTION
PIN NO.
+3.3V
2
LED_LAN2: LAN2 link LED connector
PIN NO.
DESCRIPTION
PIN NO.
1
+3.3V
2
RESET
PIN NO.
KB_MS1: Keyboard and mouse connector
PIN NO.
DESCRIPTION
PIN NO.
1
2
VCC
3
4
MSCLK
5
6
KBCLK
1
SPKR
DESCRIPTION
MSDATA
KBDATA
GND
DESCRIPTION
LAN1_LED_LNK#_ACT
DESCRIPTION
LAN2_LED_LNK#_ACT
10
LPT1: Parallel port connector
PIN NO.
DESCRIPTION
1
3
5
7
9
11
13
15
17
19
21
23
25
STROBE#
DATA1
DATA3
DATA5
DATA7
BUSY
PRINTER SELECT
ERROR#
PRINTER SELECT LN#
GND
GND
GND
GND
PIN NO.
DESCRIPTION
2
4
6
8
10
12
14
16
18
20
22
24
DATA0
DATA2
DATA4
DATA6
ACKNOWLEDGE#
PAPER EMPTY
AUTO FORM FEED #
INITIALIZE#
GND
GND
GND
GND
11
mSATA1: M-SATA card connector
PIN NO.
DESCRIPTION
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
51
PCIE_WAKE#
N/C
N/C
N/C
GND
N/C
N/C
GND
N/C
N/C
GND
SATA_RX+_C
SATA_RX-_C
GND
GND
SATA_TX-_C
SATA_TX+_C
GND
GND
+3.3V
+3.3V
+3.3V
N/C
N/C
N/C
N/C
PIN NO.
DESCRIPTION
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
52
+3.3V
GND
1.5V
N/C
N/C
N/C
N/C
N/C
GND
+3.3V
PLTRST_N
+3.3V
GND
1.5V
SMB_CLK
SMB_DATA
GND
N/C
N/C
GND
N/C
N/C
N/C
1.5V
GND
+3.3V
12
COM1, COM3, COM4, COM5: RS-232 serial port connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
DCD
2
DSR
3
RXD
4
RST
5
TXD
6
CTS
7
DTR
8
RI
9
GND
10
GND
COM2: RS-422/485 serial port connector
PIN NO.
DESCRIPTION
PIN NO.
1
RXD485#
2
3
TXD485+
4
DESCRIPTION
RXD485+
TXD485#
S_ATA1, SATA_2: SATA 6Gb/s drive connectors
PIN NO.
DESCRIPTION
PIN NO.
1
GND
2
3
SATA_TX4
5
SATA_RX6
7
GND
8
DESCRIPTION
SATA_TX+
GND
SATA RX+
N/C
13
S_ATA3: SATA 3Gb/s drive connector
PIN NO.
DESCRIPTION
PIN NO.
1
GND
2
3
SATA_TX4
5
SATA_RX6
8
7
GND
DESCRIPTION
SATA_TX+
GND
SATA RX+
N/C
CN2: SMBUS connector
PIN NO.
DESCRIPTION
1
GND
3
SMB_CLK
DESCRIPTION
SMB_DATA
+5V
PIN NO.
2
4
JSPI1: Flash SPI ROM connector
PIN NO.
DESCRIPTION
1
+3.3V
3
SPI_SO
5
GND
7
SPI_SI
PIN NO.
2
4
6
8
DESCRIPTION
JSPI2: Flash EC ROM connector
PIN NO.
DESCRIPTION
1
+3.3V
3
SPI_SO
5
GND
7
SPI_SI
PIN NO.
2
4
6
8
DESCRIPTION
SPI_CS#
NC
SPI_CLK
NC
SYS_FAN1: System fan connector
PIN NO.
DESCRIPTION
1
FANIO
3
GND
PIN NO.
2
SPI_CS#
NC
SPI_CLK
NC
DESCRIPTION
+12V (PWM)
14
TPM1: TPM connector
PIN NO.
DESCRIPTION
1
3
5
7
9
11
13
15
17
19
LCLK
LFRAME#
LRERST#
LAD3
+3.3V
LAD0
SCL
SB3V
GND
LPCPD#
PIN NO.
DESCRIPTION
2
4
6
8
10
12
14
16
18
20
GND
KEY
+5V
LAD2
LAD1
GND
SDA
SERIRQ
GLKRUN#
LDRQ#
USB2-4, USB2-5: Internal USB 2.0 connectors
PIN NO.
DESCRIPTION
PIN NO.
1
VCC
2
3
USB_DATA4
5
USB_DATA+
6
7
GND
8
DESCRIPTION
GND
USB_DATA+
USB_DATAVCC
USB3-1: Internal USB 3.0 connector
PIN NO.
DESCRIPTION
PIN NO.
DESCRIPTION
1
3
5
7
9
11
13
15
17
19
VCC
USB3_RX+
USB3_TXGND
USB_DATA+
USB_DATA+
GND
USB3_TXUSB3_RX+
VCC
2
4
6
8
10
12
14
16
18
USB3_RXGND
USB3_TX+
USB_DATANC
USB_DATAUSB3_TX+
GND
USB3_RX-
15
LAN1, LAN2: RJ45 LAN connectors
PIN NO.
DESCRIPTION
PIN NO.
1
MDIA32
3
MDIA24
5
MDIA1+
6
7
MDIA08
DESCRIPTION
MDIA3+
MDIA1MDIA2+
MDIA0+
USB2-3: USB2.0 Port Connector (type A)
PIN NO.
DESCRIPTION
PIN NO.
1
2
VCC
3
4
DATA+
DESCRIPTION
DATAGND
USB2-1, USB2-2: External USB 2.0 ports
PIN NO.
DESCRIPTION
PIN NO.
1
2
VCC
3
4
DATA+
VGA1: VGA connector
PIN NO.
DESCRIPTION
1
3
5
7
9
11
13
15
RED
BLUE
GND
GND
VCC
NC
HSYNC
DDCCLK
DESCRIPTION
DATAGND
PIN NO.
DESCRIPTION
2
4
6
8
10
12
14
GREEN
NC
GND
GND
GND
DDCDA
VSYNC
J_AT1: ATX simulated to AT mode. (short pin1 & 2)
PIN NO.
DESCRIPTION
1
PS_ON#
2
GND
16
Board Layout: Jumper and Connector Locations
(Unit: mm)
17
Download PDF

advertising