Dual 2.5” SAS/SATA Drive Kit (MCP-220-82616-0N

Dual 2.5” SAS/SATA Drive Kit (MCP-220-82616-0N)
Quick Installation Guide
The kit provides additional storage for Supermicro’s Superchassis. Key features include:
• Dual 2.5” hot-swappable capacity; support 12 Gbps/SAS3 and 6 Gbps/SATA3.
• 4 SAS/SATA port settings (backward compatible with MCP-220-82609-0N) to
support SGPIO for Fail/Locate LED indicators.
• 2.5” tool-less drive trays.
• Compatible with 216B/826B/417B/846X/847B chassis and others.
Packing List:
Part Number
CBL-0234L
CBL-0481L
CBL-CDAT-0841
MCP-220-00117-0B
BPN-SAS3-826TQ-B2B
Misc.
Optional 12G cable:
CBL-SAST-0699
Description
4-pin power supply Y-cable (15 cm)
SATA S-S cable (81 cm)
8 pin-to-8 pin SGPIO cable (81 cm)
2.5” hot-swappable tool-less drive tray
12Gbps backplane for 2.5" SAS/SATA drives
Metal cage, mounting screws and stickers
Internal mini SAS HD to 4 SATA cable (12G,
75/75/90/90cm with 75cm SB, S. 30AWG)
SAS/SATA Port Jumper Settings:
© 2016 www.supermicro.com. All rights reserved.
Quantity
1
2
1
2
1
-
Configuration
J52
J53
HDD A (Bottom)
HDD B (Top)
1 (default)
Pin 2 – 3
Pin 2 – 3
SAS/SATA #0
SAS/SATA #1
2
Pin 2 – 3
Pin 1 – 2
SAS/SATA #1
SAS/SATA #2
3
Pin 1 – 2
Pin 2 – 3
SAS/SATA #2
SAS/SATA #3
4
Pin 1 – 2
Pin 1 – 2 ANY (No Fail LED) ANY (No Fail LED)
Note: The jumper setting needs to match the corresponding SGPIO header. If the
setting is incorrect, the fail LEDs will not function properly. For details, please refer to
the motherboard manual.
Drive tray and mounting locations:
Installation:
1. Connect SATA cables, SGPIO cable and power cable.
2. Install drive kit to chassis (mounting location may vary depending on the chassis
models).
3. Install drives to the tool-less drive trays.
4. Insert drive trays to complete installation.
© 2016 www.supermicro.com. All rights reserved.
Download PDF