WIFI说明书 英文+塞尔维亚语 - vox electronics

,
Owner s Manual
WI-FI INSTRUCTIONS
For Model:
VSA9-12WE
IVA5-12WIE
※ Please read this owner, s manual carefully and
thoroughly before operating the unit!
※ Take care of this manual for future reference.
CONTENTS
Introduction to WI-FI fuctions
1
Download and install the control software
2
Reset AC WI-FI module
4
Smartphone ,pad or other mobile terminals connect to WI-FI or hotspot
4
Configure the Devices
5
Manage the Devices
6
Others
7
Appendix A: <<Config failed check items>>
7
Introduction to WI-FI Functions
The AC system is equipped with remote control technology, with the
WI-FI module inside the machine connected to the display panel and
the command to run the AC transmitted. The AC system is in constant
connection with a wireless router or access point attached to the
Internet. Mobile terminals such as smart phones and tablet computers,
on which special control software are installed and WI-FI modules
successfully configured locally, can be used as remote controllers once
they are connected to the Internet.
-1-
Download and install the control software
The control software can be downloaded and installed
as follows.
1. For mobile terminals such as smart phones and tablet ( Android 4.1 and iOS 6.0
or above only), search and download “AC Freedom” from Google Play or App
store on and install it on your system.
2. You may also use your mobile terminal (Android 4.1 and iOS 6.0 or above only)
to scan the “QR code” (see Fig.1) with a third party scan tool, which will
automatically direct you to the download interface of AC Freedom for you to
download and install the software.
For IOS
For Android
figure 1
AcFreedom
Once the control software is
installed, enter the “Scanning
Interface”(for downloading the
Welcome Page).There are two
types of log-ons contained in
the Scanning Interface(See Fig.2):
Skip
Scan the two-dimension code in specification
to activate APP
1
scan
or
enter activation code
-2-
activate
2
Download and install the control software
1. By clicking “scan” and scanning the QR code on the right .(See Fig.3)
cancel
scan
Scan the two-dimension code in specification
to activate APP
figure 3
AcFreedom
Skip
2. By entering the activation code (6364d)
in the area prompted by“enter
activation code”(see fig.4)
Scan the two-dimension code in specification
to activate APP
scan
or
figure 4
xxx /
1
-3-
activate
2
Reset AC WI-FI module
In the case of first time
configuration or after
changing the connected
wireless router is, the
WI-FI module inside the
air conditioner needs to
be reset.
To reset the module:
Press the “HEALTH” key on the
remote control for 8 times
(see Fig.5) within 5 seconds after
the air conditioner is turned on.
The reset is not done until you
hear two beeps of the buzzer.
SET TEMPERATURE(℃)
AUTO
自动
COOL
制冷
除湿
DRY
制热
HEAT
FAN
自
自动
动
HIGH
制
制冷
冷
除
除湿
湿
MID
制
制热
热
LOW
ON/OFF
SET
press “health”
button 8 times
MODE
CLEAN
SPEED
SLEEP
FRESH
STRONG
SWING
C/ F
FEELING
HEALTH FUNGUSPROOF SCREEN TIMER
Note:
The remote control provided in this figure is just
one of many models which is for your reference
only. Please rely on the model you have actually
bought, though the operations are the same for
all models.
figure 5
Smartphone ,pad or other mobile terminals connect to WIFI or hotspot
Activate the WI-FI function of the mobile terminal and connect
it to a wireless router or an access point.
Note:
A wireless router is required for the WI-FI function to work. Please purchase one if you
do not already have one.
-4-
Configure the Devices
After the control software is downloaded and installed on the
mobile terminal, configure the AC devices according to the
following figure.
<
Device List
<
Add device
Device List
Air-conditioner
Add a new device to the WIFI net work
WIFI name:
4
xxxxx
passward:
show password
2
<<Config failed check items>>
Add device
1
Activate the control
software and click
“Add device”within
30 minutes after the
WIFI module is reset.
Start the configuration
Add device
3
the WI-FI name will
automatically appear in
“Wi-Fi name”. Enter the
password of the Wi-Fi
and click “Start the
configuration”.
Once the configuration
is complete, the
“Device List” interface
will be automatically
returned to and the
configured the AC can
be seen.
figure 6
Note: 1.In the case of first time configuration or after the connected wireless router
or access point is changed, make sure the mobile terminal is already
connected to the wireless router or access point to be paired with the
WI-FI module.
2.If the configuration is failed, press “Config faild check items” to check the
notes about the failure before reconfigure the AC.
After the configuration is successful, click the corresponding
AC name to enter the control interface for further operation.
-5-
Manage the Devices
1. Modify and Lock the Devices
*
**
In the “Device List” interface, press and hold for more than 0.5 second (for Android
system )or press (for IOS system) the icon of an existing device to activate the
“modify the name” interface.
You can change the name or the icon, to identify different AC devices.
To lock a device, simply touch the “Locking Device” icon. Once a device is locked,
other users won't be able to search for it, thus preventing it from hostile control.
After the configurations of the AC device names, icons and locking status are
complete, touching “Save” will save and validate them.
Add device
<
save
Modify the name
5
Air-conditioner
>
Photo
1
Name:
Air-conditioner
3
Locking Device
T
>
2
>
4 >
Firmware Upgrade
Add device
Delete Device
figure 7
2. Delete an AC under control
For Android: Click “Delete Device” button under “Modify the name” in Fig.7.
For IOS: Swipe over the AC name to the left under “Device List” and click “Delete”.
3.Remote control with wireless router
Once the wireless router is connected to the Internet, activating the GPRS on the
mobile terminal will enable the remote control of the devices.
-6-
Others
1. The software provides help service through which the users may check the
operational instructions of the software and other information.
2. Besides, as the operation interface and the function of the software is under
constant improvement, we will keep you informed about the subsequent upgrades
for your updating.
3. As the operation interface may change due to the constant version upgrading,
the figures in this manual are for reference only, so please rely on the actual
operation interface.
Appendix A: <<Config faild check items>>
1. Please check the Wi-Fi icon on the air conditioner panel, if the icon not display,
please contact customer service.
2. Please make sure the mobile phone network under the current router WI-FI
environment: Close the mobile phone 3G/4G data connection, to be connected
to the router WI-FI pairing.
3. Please check whether the module reset successfully: Press the button health
on the remote controller 8 times to reset, a "drip drip " sound said reset
successfully.
4. Please check the Wi-Fi name of the router, recommended not contain spaces and
other non-alphanumeric characters.
5. Please check the Wi-Fi password of the router, not allowed more than 32 bits,
recommended not contain spaces and special symbols in addition to letters
and numbers.
6. Please check whether the Wi-Fi password input is correct when APP
configuration:you can check show password to confirm when input the
WI-FI password.
-7-
9 -12WE
IVA5-12WIE
Download PDF